Start screen flashes constantly

Similar Questions

• Equium A60: display screen flashes constantly

  My A60 is not so old and after 20 minutes after ignition, the screen flashes constantly for about 10 minutes then stops then starts again. I thought that maybe it's something to do with the computer over heating, but its not even hot and the fan is not blocked. Any Suggestions? Also seems to take ten minutes to load up, which seems to long for a 2.8 GHz machine or is this normal?

  Any help would be appreciated

  Hi aleeg81, it sounds like the power of the backlight may be suffering from malfunction any or there is a loose video connection. Have you tried to adjust the options and the brightness of the screen to see if it improves things to save energy? If the problem persists and your laptop is under warranty, I would recommend send to Toshiba for investigation. Twinkle is not normal and should not be tolerated if your laptop runs hot or not. Windows should not take 10 minutes to load or perhaps you need to remove and change a few things to improve this, see: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=8355
  For more information :)

  Richard S.

• Photoshop document screen flashes constantly

  Hello.
  
  The Document screen flashes constantly and does not support the click of the mouse to work in PS CC 2015. But the version of photoshop 2014 works very well
  
  my graphics card is NVIDIA GTX660 - Win10

  Hi AlienSheonite,

  This is a known issue and appears to be caused by the new workspace of departure.

  To disable the workspace to boot, go into Photoshop preferences > General > uncheck "Show Start Workspace" > restart Photoshop.

  Kind regards

  Claes

• Screen flashes constantly on iTunes store

  When I play my iTunes on my Windows 7 computer, that is fine, but as soon as I connect to iTunes Store, the screen flickers constantly, I've never had this happen before and I was wondering if it was a problem that I can sort?

  You should be able to solve this problem in re - download iTunes from http://www.apple.com/itunes/download/ 12.3.2.25 and re-install.  The iTunes Store/flickering screen flashing was present in the original version of this release (since 9 December), but Apple slipped out a re - build (unfortunately and wrongly with the same build number) on December 23/24, which seems to fix most / all users.

  There is another question - peut-related - which affects display iTunes on very high resolution screens.  Everything first, that appears in iTunes 12.3.1 but is not fixed yet, although it may be mitigated by reducing the size of the iTunes window.

• XP start screen flashes then restarts the computer (usually start in any mode, restarts just instantly)

  Hello

  My xp computer has stopped working completely for some unknown reason. Last Friday I took my girls login Thinkpoint virus successfully. Nobody is using the computer since then when my daughter connected today it froze after a bit of use. It restarted, and now it won't start at all. It shows the BIOS loading but then flashes the screen and loading XP restarts. If I try to reboot safe mode or use the last known good config that the computer still does not start XP.

  I already did the following:

  Check disk

  Bootcfg/Repair

  System recovery (the one where you will install a new XP (with OS CD started from) but hitting R instead)

  I am at a loss about what to do in addition to do a format/reinstall. There is no document import on this computer, but it would be better to do not reinstall.

  P.S. It's a Dell Precision 390. And he has a strange video card, DVI dual nVidia Quadro NVS 285. Ive never seen anything else like before.

  Thank you

  Hello

  (a) you can follow this link to perform a manual system restore & verify if you are able to start correctly on the desktop.

  How do I recover from a corrupted registry that prevents Windows XP startup

  (b) If you are able to boot to the desktop, you can run virus scan anonline again from the link below. If you have antivirus software installed on your computer, please install the latest update of the software to make it work properly.

  http://OneCare.live.com/site/en-NZ/default.htm?mkt=en-NZ

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Start screen flashes on all applications in CC?

  I have a new laptop of Lenovo P50. When I start one of the applications of Adobe CC, the splash screen just flashes white... its normal content does not appear. If I hover the mouse on the screen, it stops flashing and is just a grey area.  I can close the box and then use the application without any problem.  I was wondering why he is doing this.

  What CC, the new laptop, Windows 10 or something else?

  Any ideas?

  Lenovo P50 monitor, 32 GB RAM, SSD 256, 3840 x 2160 UHD 15.4 "external display, Windows Pro 10, Dell 27 ' U2715H

  Hello

  You can refer -:new Creative Cloud application unusable: it is empty!

  and also try:-screen black at sign - in | Creative Office Cloud app

  Hope this helps!

• Satellite M305 series screen flashes constantly

  My screen has been flickering almost constantly from about 2 days ago.

  I am open to ANY suggestion because really, I don't want to have to buy a new computer or a screen.

  Please and thank you.

  Hello

  What do you mean exactly?
  The display backlight turns on and outside?
  Have you noticed the same problem using an external monitor?

  Updating the graphics driver, what would you say? Have you tried that?
  If this isn't it!

• Screen flashing right at the top of my screen (Windows 8)

  Hey everyone, I have a question about my monitor/screen on my laptop. My laptop is a Compaq CQ58 running Windows 8. Whenever I'm on my laptop (especially of office) there is this thin white line on the top of my screen flashes constantly. Sometimes it is imperceptible, but sometimes it's really, really bad, (covers at least a quarter of my screen).

  I have no warranty, and I wonder if this is an issue that can be fixed easily without hassle.

  Thank you.

  Hi Talal,

  You might face this problem because of corrupted display driver. Please provide the following details.

  You did changes to the display settings prior to this problem?

  I suggest you to uninstall and reinstall the display on the HP website driver and check if it works.  Follow the steps below.

  Uninstall and reinstall the HP website display drivers.

  Step 1: Uninstall display drivers from the Device Manager.

  1. Press the Windows key + X , and then select Device Manager
  2. You can get display drivers and expand it.
  3. Right-click on the display drivers and select Uninstall.

  Step 2: Install the latest display (graphics card) drivers on the site of HP for Windows 8. You can use the link given below to download the driver.

  Drivers for laptop PC Compaq Presario CQ58-140SM

   

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4131&LC=en&cc=us&DLC=en&sw_lang=&product=5287590#n193

  I suggest you follow the steps in the section Image on the screen flickers, has lines or distorted colors from the link given below.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01881110&cc=us&DLC=en&LC=en&OS=4131&product=5287590&sw_lang=#n585

  Write to us at the State of the question. We will help you.

• When I start Windows XP, my screen flashes, a help option is displayed in the taskbar and my audio and video have disappeared.

  After I start my system (XP) my audio system works very well. After some time the HELP screen flashes option appears on the taskbar and my audio and video sounds have disappeared. I can hear system sounds. I downloaded Fixit from Microsoft Support for its repair. But when I run it I see a runtime error 80040402. 2-3 days back, I had installed Avast 6.0.100 to get rid of a deadly virus that infected my flash drives. Since then, I have this problem. Help, please?

  original title: Sound stops working after a while

  Hello

   
   
  Follow these methods mentioned below and check.
  Method 1: run a scan for viruses with Microsoft Safety scanner and check.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: Before performing safety analysis make a backup of important data.
   
   
   
  Method 2: The scanner (System file check) SFC and check if there are any file system corruption.
  a. to do this, click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747
   
   
   
  Method 3:
  How to update a sound card driver in Windows Vista and Windows XP
  http://support.Microsoft.com/kb/166774
   

• Windows wars Napoleon Cossacks 8. I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

  I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

  Wednesday, April 15, 2015, 17:56:29 + 0000, PhilipMallard wrote:

  I bought a Windows 8.1 today and wish I hadn't! It's a pain to use (I had a Windows 7 previously). None of my games of Cossacks work on windows 8.1 either and I've tried them in compatibility mode. Is it possible to install Windows 7 on my new computer and replace the disastrous 8.1 version?

  I would like to point out something that you may not realize: Windows 8
  has two interfaces; the modern/Metro Interface (which may be all the)
  you have looked at) and the traditional desktop Interface. You can use
  one or both. This traditional desktop Interface is almost
  identical to the interface of Windows 7. the biggest difference is that
  There is no Orb start clicking to bring up the start menu.

  But note that you can get the ORB start by using one of the many
  third-party programs, are free or very cheap (the classic interface
  http://classicshell.sourceforge.NET/ and debut8 to
  http://www.stardock.com/products/start8/; my personal preference is
  Debut8, but they are both very good).  And goes from an interface to
  the other is very easy; There are several ways, but simply by pressing
  the Windows key is perhaps the easiest.

  Just install one of these two and using the traditional desktop computer
  interface may be a better choice for you than going to Windows 7.
  I use Windows 8, almost exclusively with traditional workstations
  the interface and with 8 Start installed. If you were to look at and use
  my computer, you may have a hard time realizing that it is not
  Windows 7.
  I also recommend to read "how to make Windows 8 or 8.1 watch and.
  Want Windows 7 "to http://www.howtogeek.com/elk/298/45121/4206
  I can't address the issue with your games, except to say that
  whenever you move to a new version of the operating system, some of
  which is used to run on the former does not work on the new. And it's
  much more likely with utilities and games with companies
  applications.

• Some applications Windows 8 will not be open and constantly return to the start screen

  Some Windows 8 applications (calendar, Photos, Messenger, etc.) do not open and return to the start screen. I updated the computer, so the apps worked during this session.  However, after that I disconnected and re-connected to the laptop the next day, the same apps stopped working again.  This continues that occur on a regular basis.  How to solve definitively the problem?

  Note: I noticed that others have this same problem, and I tried the troubleshooting suggestions (i.e., to download the troubleshooter of the modern user interface, cache cleanup, etc.), but none of these suggestions has definitely solved the problem.  I bought my new laptop two months ago and have been facing this problem since.  I want a permanent solution.

  See http://answers.microsoft.com/message/6f3aa7c2-feff-4fdd-a9b0-5d10ea4e604b>
   
  W8 comes with built in AV from Microsoft (Windows Defender) solution. You do
  not actually need a third party.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• 2008 mac book pro screen flashing folder with question mark at startup

  2008 mac book pro screen flashing folder with question mark replaced boot hard drive and cable, continues to do the same.  any ideas to fix?

  Start your Mac by holding down the button Option. The should launch the window of Boot Manager where you can select the startup disk, and then click on restart.

  How to choose a boot on your Mac - Apple Support drive

• 10 update, the screen flashes.

  Update Windows 7 10, (last night). My laptop screen keeps flashing and I can't use the computer at all. How can I uninstall Windows 10 & back to 7?

  I suggest you only start Win10 in safe mode. Because you screen flashes the only way to do so is in the password screen. When you're at the password screen, click the power options in the lower right. Hold down the SHIFT key and select restart. This will get you to the troubleshooting page. Once you're in safe mode, you can return to Win7. I suggest you google "Win10 starting in safe mode" and "return to Win7 from Win10. It should provide you with screenshots. I hope this helps.

• Screen flashing after migration to Windows 10

  Hello
  The screen flashes and I can't do any action except (CTRL + ALT + DELETE) just after the migration of Windows 10 on my laptop Satellite L855 17V.
  Help, please.

  Kind regards.

  Laurent

  Hi Laurent

  Did you get all the answers. I am new to this and have just turned on my Toshiba Satellite C55 still work on windows 8.1 and the screen goes ballistic. After that signature in the display starts to Flash and the only thing I can do is CTRL + ALT + DELETE. I wonder if its something to do with 25 downloads of Microsoft?
  If anyone can help please notify

• Envy TouchSmart desktop: screen flashes on the screen of windows 7 (in blue) to black

  When I turn on my computer, sometimes the blue screen with 'Windows 7' on this subject. The wheel of death comes up and then the screen flashes blue to black. I'm in huge trouble because I back upwards (I know, I know) and the first half of my research project is about it. Help, please.

  Hi there @Dfash,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have a problem with the black screen. I'll be happy to help you.

  Here are two documents that can help.

  Computer won't start (Windows 7, Vista, XP)

  Computer starts but the screen stays white (Windows, 10, 8)

  Please keep me informed of the progress of things. If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution. To simply say thank you, click the Thumbs up below!

  Thank you.