START STOP FLASHING BEFORE MOVING TO A FORMAT AND THE PROBLEM OF PRODUCT KEY.

Similar Questions

• Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

  Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

  The phone is new (5 days). It's a wedding?

  If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

• Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Hi ipitedafoo,

  You can check if this article helps.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  See also:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

• When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

  When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• I just started to use a new version of Illustrator and the text I've created has a pink box behind, seems to be on the depth of the normal linespace, it is not visible in outline view, only in the preview. What is this and how do I get rid of him?

  I just started to use a new version of Illustrator and the text I've created has a pink box behind, seems to be on the depth of the normal linespace, it is not visible in outline view, only in the preview. What is this and how do I get rid of him?

  A pink box indicates that the font is not installed. This is a file that you have worked before, or is this a new file?

• I'm having the problem of local connection on my Dell PC with Vista. ISP is Verizon FIOS. FiOS representative told me to disable Ipv6 and the problem stops. Is this correct?

  I'm having the problem of local connection on my Dell PC with Vista. ISP is Verizon FIOS. FiOS representative told me to disable Ipv6 and the problem stops. Is this correct?

  original title: local area connection problem

  Hello

  1. What is the exact problem you are facing with local connection?

  2. how many computers have you plugged into the network?

  Please provide the information of network event logs to help you best.

  Click on the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-Windows-Network-Diagnostics-event-logs-to-solve-network-problems

  In the meantime, run the troubleshooter mentioned in the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• Mr President, I have vista preinstalled and I formatted now it asks for product key. What can I do now?

  Mr President, I have vista preinstalled and I formatted now it asks for product key. What can I do now?

  The sticker that contains the product key is turned pale as I bought it 3 years ago and I have not written the key anywhere elsewhere.
  Please help me.
  I need the key to activate my windows vista.

  Hello

  If you use the manufacturer or their recovery disk recovery partition should not be required to have an entry of product key when reinstalling back to factory settings

  We cannot help you find a now non-existent product key

  I suggest you contact the manufacturer of the computer

• The update to version 2 of Vitsa fail. Formatted hard drive to purchase the version. need to find the final vista product key

  The update to version 2 of Vitsa fail. Formatted hard drive to purchase the version. need to find the final vista product key

  It should be on a sticker on the box, or on the packaging.

  The product key consisted of 25 digits, divided into 5 groups of 5 digits.

  See you soon...

  Mick Murphy - Microsoft partner

• When I try to logoff, the screen starts to Flash as trying to load screen and then finally shuts down the computer.

  Original title: Windows 7 problem

  I will have questions all the time my office. When I try to shut down rather than get the loggin screen the screen starts flashing as trying to load screen and then finally shuts down the computer. I just bought the computer and it runs Windows 7. What could be the problem? Oh I forgot to mention that, after that I start the computer the configuration screen appears saying that windows did not close normally and if I want to start in safe mode.

  Hello

  Here are a few questions to better understand the issue:

  1 made only while off log?

  2. what happens when you restart?

  3 have you tried with different user accounts?

  4 you did changes to the computer before the show?

  Let us try the following and see if they help.

   

  Method 1: Check the event viewer for more details on this subject.

   

  Event Viewer is a tool that displays detailed information about important events on your computer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

   

  Method 2: Run the following fix:

  There is a delay when you stop, restart or log off a computer that is running Windows 7 or Windows Server 2008 R2

  http://support.Microsoft.com/kb/975777

   

  Method 3: Perform the clean boot and check

  It may be that a third-party application is causing this issue. Put the system at boot.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

   

  Method 4: I suggest you make a system full scan just to be sure.

  Here is a link that will give you information on how to perform a full scan of the system:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  , Note 1: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note 2: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

   

• Why does start printer print before I select "print preview or the selection?

  Recently purchased HP Officejet 4500 all-in-One. Installation is easy and fast, but when I click on the printer, the symbol "printer" automatically starts to print before I can choose "preview before printing or page. Must hit "Cancel" buton until the third test. Then, it will offer "print preview." How can I stop automatic printing?

  Hello

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  If the update of drivers does not resolve the problem contact the seller and the support of HP warranty service.

  Good luck, you need to update or reinstall the latest driver.

  HP - OfficeJet 4500 - select the version of your printer - and then select your version of Windows
  http://WWW8.HP.com/us/en/support-drivers.html

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Dial a number through rings PSTN three times before moving on to compose through the line

  Dial a number through rings PSTN three times before moving on to dial by phone line.
  I would like to Setup so that when I dial a local number through the phone line, but when I dial long distance call going VoIP.
  In our city to the Canada, we make a local call using the area code. e.g. xxx-xxx-xxxx
  Long distance is preceded by a 1 e.g. 1 xxx xxx-xxxx
  The numbering plan defined in 1 line numbering Plan: is (250xxxxxxx<:@gw0>| 1xxxxxxxxxx.)

  How can I make the SPA3102 immediately start dialing the local number without the three three apparently redundant rings?

  
  

• Hi, I'm trying to use Windows Live Movie Maker to create a movie. The film is in MP4 format and the program does not allow me to open to make a new film. Windows Media Player does not play either.

  You have problems with programs:
  -Windows Live Movie Maker
  -Windows Media Player

  Error messages:
  -Windows Live Movie Maker: Sorry Movie Maker cannot open this project file. The file is not compatible with Windows Live Movie Maker or damaged. Please select a different project file. (button: "Learn more".)
  -Windows Media Player: Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.

  Recent changes to your problem:
  None

  What have you tried to solve the problem:
  Reinstall Windows Live Movie Maker

  Format of the file:
  MP4

  You have problems with programs:
  -Windows Live Movie Maker
  -Windows Media Player

  Error messages:
  -Windows Live Movie Maker: Sorry Movie Maker cannot open this project file. The file is not compatible with Windows Live Movie Maker or damaged. Please select a different project file. (button: "Learn more".)
  -Windows Media Player: Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.

  Recent changes to your problem:
  None

  What have you tried to solve the problem:
  Reinstall Windows Live Movie Maker

  Format of the file:
  MP4

  =============================================
  The dialog box that you quoted says "Project file" in Windows Live Movie Maker
  It would be a file with an extension WLMP. Or if the file was created with
  an earlier version of Movie Maker, it can have an extension .mswmm.

  So... just to clarify... MP4 extension or WLMP or something else?

  If the files are MP4, you will need to convert them to WMV format before
  import into Movie Maker.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (the file you want to download is: > FFSetup250.zip
  (FWIW... installation..., you might want to
  Uncheck all of the boxes on the last screen)

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  For information on playback of MP4 files... the following article may be worth a visit:

  Multimedia Windows Media Player (316992)
  file formats
  http://support.Microsoft.com/kb/316992/en-us
  > scroll waaay to MPEG-4 (.mp4)

  Alternative media players:

  FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates.

  With the help of the Windows Vista system restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  VLC Media Player
  http://www.videolan.org/

  Media Player Classic
  http://www.filehippo.com/download_media_player_classic/

  Apple Quicktime
  http://www.Apple.com/QuickTime/Download/

  QuickTime Alternative
  http://www.filehippo.com/download_quicktime_alternative/

  And it might be worth a try to download
  and install 'one' of the following free codec packs:

  * Proceed at your own risk *.

  Vista Codec Package
  http://fileforum.betanews.com/detail/Vista-codec-package/1159994557/1

  K - Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/

  CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• HP laptop: where can I find the windows 10 product key for my Hp laptop I have moved and can not find my disk

  I need help to locate the windows product key 10 to my Hp laptop I lost the box and disc as I have recently moved and cannot locate I look under the battery and does not see the key code. My son decided to factory reset my laptop.

  Got it, thank you very much, it worked, I used the second tool!

• Windows does not start gives a 0xcooooo98 code file:ntoskrnl.exe and the status

  I went to microsoft update, and important updates of downloaded and my startup collapsed Windows I tried each seting I could find that it keeps telling me that a file is missing or corupted is there anything I can do to set the file

  http://www.windowsreference.com/Windows-Vista/fix-for-ntoskrnlexe-missing-or-corrupt-error-0x0000098-when-booting-up-Vista/

  Read the information above.

  We do not know what type of disc of Vista you have.

  Try these steps to do a Startup Repair:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• A single button for his start &amp; stop Flash AS3

  Hello

  I'm trying to create a sound button to play a sound, and then stop when you click New.

  
  I thought it would be easy because there is a snippet of code for "click to play/stop sound.

  I have my sound file in my library.

  The following code does not work:

  Directions for use:
  1. replace "http://www.helpexamples.com/flash/sound/song1.mp3"below with the URL address of your audio file that you want. " Keep the quotation marks ("").
  */

  CYOA2bttn.addEventListener (MouseEvent.CLICK, fl_ClickToPlayStopSound_11);

  var fl_SC_11:SoundChannel;

  This variable keeps track of whether you want to start or stop the sound
  var fl_ToPlay_11:Boolean = true;

  Proxy-Connection: keep-alive Cache-Control: max - age = 0 Cp > function fl_ClickToPlayStopSound_11(evt:MouseEvent):void
  {
  If (fl_ToPlay_11)
  {
  var s:Sound = new Sound (new URLRequest("CYOA2.wav"));
  fl_SC_11 = s.play ();
  }
  on the other
  {
  fl_SC_11.stop ();
  }
  fl_ToPlay_11 =! fl_ToPlay_11;
  }
  
  

  CYOA2bttn is my button and CYOA2.wav is my audio file.

  The error that appears when I try to test the Flash file is:

  Error #2044: Unmanaged by the IOErrorEvent:. Text = Error #2032: error flow.
  at CYOA_fla::MainTimeline/fl_ClickToPlayStopSound_11()

  ALL OF THE SUGGESTIONS!

  Help please

  Hello

  If the mp3 is in your library (in your fla) then the code is slightly different...

  First, right click on the sound in the library and select Properties. Then check "Export for ActionScript" and enter a name in the 'class' (for example: mySound).

  Then change your code:

  replace:

  var s:Sound = new Sound (new URLRequest("CYOA2.wav"));

  with:

  var s:Sound = new mySound();

  (replace 'mySound' with someone ' u came to the 'class' above.)