Leave only one participant who started the instance runs workitems
HelloI want that some work items in my case to be executed by the participant who created the instance.
I tried setting participant.sticky = true in the BeginIn of the process but did not work.
Please tell me how to get there.
Thank you
Elina
Edited by: 22 Elina_ Ιαν 2013 03:35 μμ
Hi Elina,
One way to do this in 10g would be to add this logic in an automatic activity immediately preceding your Interactive activity:
participant.next = creation.participant
'Participant' and 'creation' variables are variables predefined which is created automatically when a new work item instance is created. By the "participant.next" parameter, you say engine Oracle BPM work item must only show a person (from the default value of the being in the queue of each person who plays) in the queue. Setting it to "creation.particpant", that you want to set it to the person who created the work item instance.
Dan
Tags: Fusion Middleware
Similar Questions
-
My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.
I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...Hi Srimotu,
· You get an error message or an error code?
· Have you made changes on the computer before this problem?
Follow these methods.
Method 1: Try starting it in last known good configuration.
http://support.Microsoft.com/kb/307852
Method 2: Try to start in safe mode.
http://support.Microsoft.com/kb/315222
If you are able to boot into safe mode, try a clean boot.
http://support.Microsoft.com/kb/310353
Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.
Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.
Also disable automatic restart in the event of system failure
-
Start the clusterware (CRS) without starting the instance in a node
version is > 11.2.0.1
operating system: Solaris 5.10
Using
I can start the CRS in a node. But I don't want to start the instance in this node. I just want to start the clusterware and ASM instance in this node.#$GRID_HOME/bin/crsctl start crs
No idea how I can do this?
Haven't seen this option in the Help menu for crsctl# ./crsctl -h Usage: crsctl add - add a resource, type or other entity crsctl backup - back up voting disk for CSS crsctl check - check a service, resource or other entity crsctl config - output autostart configuration crsctl debug - obtain or modify debug state crsctl delete - delete a resource, type or other entity crsctl disable - disable autostart crsctl discover - discover DHCP server crsctl enable - enable autostart crsctl get - get an entity value crsctl getperm - get entity permissions crsctl lsmodules - list debug modules crsctl modify - modify a resource, type or other entity crsctl query - query service state crsctl pin - Pin the nodes in the nodelist crsctl relocate - relocate a resource, server or other entity crsctl replace - replaces the location of voting files crsctl release - release a DHCP lease crsctl request - request a DHCP lease crsctl setperm - set entity permissions crsctl set - set an entity value crsctl start - start a resource, server or other entity crsctl status - get status of a resource or other entity crsctl stop - stop a resource, server or other entity crsctl unpin - unpin the nodes in the nodelist crsctl unset - unset a entity value, restoring its default
Hello
You cannot give this information directly at the start of clusterware.
This option is to disable the resources, you do not want to start before running the node.
Note: You can do it from another node, to disable the startup on the node that you want to start:In general, you can do this with
Disable srvctl $The correct syntax depends on the type of management you used.
Managed political use of databases:srvctl disable the d
- n database Administrator management databases:
srvctl disable instance d
-i " ". Concerning
Sebastian -
Cannot install Flash Player as "only one version of this application can run.
I had problems with Flash Player earlier today and decided to uninstall it (from Windows 7) and reinstall from scratch. I uninstalled and tried to reinstall it but now I get the following message appears: cannot install Flash Player as "only one version of this application can run" I tried to uninstall I checked to see if there was still a program to install but it does not exist. I checked my files in Windows and there are several files called Install_Flashplayer _16x32... files. I assume that they are created whenever I tried to install Flash Player. I thought to delete many files install FlashPlayer but decided to ask for help before taking this step.
Browser: Firefox 35.0.1
Windows 7 Home Premium
64 bit OS
I managed to install Flash Player and it works. I deleted all the installation files except one who did not want to be deleted, then I started to install Flash Player, until I got the message about the conflicting demands. I then used the Ctrl + Alt + Delete to open the Task Manager, then closed all tasks except the Flash Player one. Flash Player finished the installation. Then, I opened a TV Player in Firefox and was able to play a program that requires a Flash Player.
Why don't I have to use the Task Manager to close applications. I don't remember the last time that I used it ut think that it was a year ago, when my computer would not shut.
-
I would like to add a photo in my video for 2 seconds, then only within a framework of the video running (to cover some part of the picture in video for 2 seconds. Is it possible to do?
Just add your photo on a higher video track, it will cover up to a below. You can use the effects of movement to move and scale the image.
-
Cannot start the instance with srvctl only sqlplus
Hello
I must be missing something very obvious here... I can't launch the instances on our 2 CCR node with srvctl (fine get all others managed by cluster service/listeners/etc), but if I use sqlplus + start, all right.
Oracle Standard Edition 11.1.0.7 on Linux x 86-64
Instances: bopa1 + bopa2
Nodes: bls0114 + bls0115
The error I get is:
-----
bls0115:ora. Bopa.bopa2.inst:
bls0115:ora. Bopa.bopa2.inst:SQL * more: version 11.1.0.7.0 - Production on Sun Oct 21 16:12:59 2012
bls0115:ora. Bopa.bopa2.inst:
bls0115:ora. Bopa.bopa2.inst:Copyright (c) 1982, 2008, Oracle. All rights reserved.
bls0115:ora. Bopa.bopa2.inst:
bls0115:ora. Bopa.bopa2.inst: Enter-username: connect to an idle instance.
bls0115:ora. Bopa.bopa2.inst:
bls0115:ora. Bopa.bopa2.inst:SQL > ORA-00119: invalid specification for the system REMOTE_LISTENER parameter
bls0115:ora. Bopa.bopa2.inst:ORA - 00132: error syntax or network name not resolved "LISTENERS_BOPA."
bls0115:ora. Bopa.bopa2.inst:ORA - 01078: failure in the treatment of system settings
bls0115:ora. Bopa.bopa2.inst:SQL > disconnected
bls0115:ora. Bopa.bopa2.inst:
CRS-0215: could not start resource 'ora.bopa.bopa2.inst '.
-----
Looking lsnrctl status, I don't see that LISTENER_host name on the nodes, has something to do with it?
The cluster has been newly installed and works fine otherwise.
Published by: traore on 25 October 2012 14:25Hello
you have defined a REMOTE_LISTENER parameter in the database which can be solved with the TNSNAMES.ora uses the clusterware.
Then 2 possibilities:
(a.) your tnsnames.ora to the dbhome contains no entry of the LISTENERS_BOPA.
(b) you use a tnsnames.ora different due to the use of the TNS_ADMIN variable. It's probably settled in the sqlplus environment, but not on the level of database/instance when clusterware tries to start.Set it with:
setenv srvctl database dt ' "TNS_ADMIN = ". or perhaps at the level of the instance (instance of setenv srvctl - but I'm not sure it exists.) Sorry no atm 11.1 cluster to check).
Concerning
Sebastian -
All accounts are added to the Thunder birds, but now I only see messages from them - Olga messages.
I can't spend another profile, then maybe that I clicked on a button and it display only one profile.
Sorry, but English is not my mother tongue, but I hope it's understandable)
Thank you!In the menu bar select view-presentation-folder pane
No menu bar? Press the ALT key.
-
Only one speaker works on the bottom of the phone
All the documentation that comes with the Turbo 2 and online documentation I've seen before buying indicate that there are two audio ports on the bottom of the phone, one on each side of the Verizon logo. However, only the side right (while facing the phone) actually works. The left speaker does not work. Verizon, which did not, I called and they put someone in support of Motorola on the line. The motorcycle rep says absolutely the two speakers should work and my phone is defective. They suggested that I return it as a guarantee of Exchange. I'm happy to do, but before I did I stopped by a verizon store and checked four phones they had on display. All four phones had the same "defect". So is - can anyone clarify if both speakers work on any Turbo 2 phones?
I was also wondering with all these mixed news, but there's a tear down video on YouTube which shows clearly there is only one speaker. I hear only on the bottom right, that nothing about ports to the left on mine.
-
HW 2 get the value to select only one option selected by the user in the bean support
IAM using the select only one option button that is filled during execution.
I want to get the value selected by the user of a choice selection in the bean to support for other operations of... .IAM using this method, but I got a null pointer exception.
Public Sub test (ValueChangeEvent tokenChange)
{
Integer tokenIndex = (Integer) tokenChange.getNewValue ();
DCIteratorBinding tokenListIter is getBindings1 () .findIteratorBinding ("TokenIDVOIterator");. in this line null pointer exception
Token of the line = tokenListIter.getRowAtRangeIndex (tokenIndex.intValue ());
currenttoken = (Number) token.getAttribute ("TokenId");
System.out.println ("token ID selected:" + currenttoken);
}
I want to know if there is any method to get the value of the value selected by the user to select a choice...
pls help? //3 words:
"research on the forum.
asked and answered countless times.
-
Hi people,
I am cloning EBS R12.2.4 for the first time. Database is in read/write mode. After clone then managed fs1. But while I was trying to services to run two services named (oacore_server1 and oafm_server1) not upward before clone, and ended with the error:
ERROR: Could not start the managed server oacore_server1
ERROR: Could not start the managed server oafm_server1
Later, I tried to them manually, but the same results as the previous. I paste the details from the journal of oafm_server1.
[Journal of the applmgr@abcddb] $ cat adoafmctl.txt
07/26/15-00: 51:20: admanagedsrvctl.sh version 120.14.12020000.10
Validated the arguments passed to the ebs-get-serverstatus option
oafm_server1 is in STOP mode.
Validated the arguments passed to the ebs-nmstart-managedsrv option
The server oafm_server1 is not up. Procedure to start the server.
Check if the Node Manager is already in place...
Connection to the node Manager...
Connected to the node Manager.
The Node Manager is already in place.
ERROR: Could not start the managed server oafm_server1
26/07/01-15: 07:57: admanagedsrvctl.sh: exit status 1
================================================================================
26/07/01-15: 19:04: admanagedsrvctl.sh version 120.14.12020000.10
Validated the arguments passed to the ebs-get-serverstatus option
oafm_server1 is in STOP mode.
26/07/01-15: 20:48: admanagedsrvctl.sh: exit with status 0
================================================================================
26/07/01-15: 21:12: admanagedsrvctl.sh version 120.14.12020000.10
Call txkChkEBSDependecies.pl to make the dependency checks for oafm_server1
Perl txkChkEBSDependecies.pl script has run successfully
Validated the arguments passed to the ebs-get-serverstatus option
oafm_server1 is in STOP mode.
Validated the arguments passed to the ebs-nmstart-managedsrv option
The server oafm_server1 is not up. Procedure to start the server.
Check if the Node Manager is already in place...
Connection to the node Manager...
Connected to the node Manager.
The Node Manager is already in place.
ERROR: Could not start the managed server oafm_server1
07/26/15-12: 49:18: admanagedsrvctl.sh: exit status 1
================================================================================
Kind regards
Ali
Ali and Sandeep, follow these steps:
starting at $ perl admanagedsrvctl.sh oafm_server1 - Dweblogic.security.allowCryptoJDefaultJCEVerification = true
ARO
-
start the instance failed on linux...
My database starts automatically with the start of linux... but I made a few changes in the NETWORK CONFIGURATION changed hostname: hostname TEST: local.localdomain
now, again, I have reset its value previous hostname: local.localdomain
When that I log out and when you connect, I get the following message:
Could not look up internet address for localhost. This will prevent the GNOME to work correctly.
It may be possible to correct the problem by adding localhost.localdoman to the/etc/host file
When I login I the Oracle instance not started automatically...
When I run the startup... I get below error:
[ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1] [] [] [], [],]Well, it's one of these some errors which can be solved using only without support. What is happening is that your db is not able to find the host name, and it cannot start. The reason is that you must have a DHCP based machine. In your/etc/hosts, it must that any input should and the output of hostname-f must not enter. If it is Yes, then you must add the IP address to your/etc/hosts as. Read this post of mine where I describe the solution of the same mistake.
http://oracleadmins.WordPress.com/2008/08/06/ora-00600keltnfy-ldminit/
HTH
Aman... -
Dell XPS 2710 all-in-One will not start, the totally blank screen
Hello. This is my first post on the forums and I hope someone can help me.
The Dell XPS 2710 all-in-one I bought for my 10 year old 15 months ago (Yes, that means that the guarantee is expired) will not start. No no post, no beeps, nothing. Just a brief spark of light on the screen, no words, nothing. The machine gets occasional use, and there is nothing to indicate what could have caused the problem. I have not upgraded the BIOS recently, is not as if it was a bad BIOS update, or whatever it is. I tried to hit the F1, F2, F12 keys delete during startup. No results.
The video works. I know because I can connect my laptop to the HDMI-in port and I can see the desktop of my laptop very well. So the question is NOT the video. My son uses this machine for occasional movies and homework in his room. I want to fix the computer, if I can. I am handy with computers and built several machines from the outset in the past.
I believe that the most likely scenario is that the motherboard has went wrong; There are several posts around the internet about motherboards 2710 AIO being unreliable. I saw an ad on the forums of Dell from a guy who said Dell Tech Support replaced its motherboard 2710 five times. I see that some of these motherboards are selling on eBay for around $200. I'm toying with the idea of getting a. I watched the service manual for the 2710 and I'm pretty confident that I could replace the Board of Directors.
Someone had experience with permutation on their motherboard on a 2710 AIO? Or someone has any ideas on what could be the problem with my son's computer? I appreciate all the advice/help anyone could offer.
OK, I have removed all the RAM from the motherboard (there were two sticks) and unplug the connector on the SATA hard drive. Then I turned on the machine and got two beeps very strong, but still no video on the screen indicating any form of activity of the POST. The sound signals have been first sounds I've ever heard during the procedure of boot on this machine. I put the RAM back in and re-connected the SATA cable. The way he has been, no video, no post, no beeps. I'm a bit at a loss for what I've decided, this means that the motherboard works technically and that another device on the machine is at the origin of the problem? Have I reason to assume that if I hear two beeps, then I should have the certainty that the motherboard was bad? Given that this a sound signal, the solution becomes cloudy, I guess. I can't help but feel that somehow the BIOS on the computer is damaged. Don't quite know how that could happen, however, because I have not updated the BIOS in over a year. I don't remember what BIOS version I have, but he had been working well for a year with no problems. Thanks for any other help/suggestions you can provide.
-
Only one speaker works on the helmet
This isn't a problem with the headphones, I tried several pairs, each of them works fine on other devices. Is not a problem with the left-right balance of the speakers I checked this setting. Curiously, the built-in speakers work fine.
So good with these controls out of the way, I use a 2 week old Acer Aspire Timeline AS3810T running 64-bit edition Windows 7 Home premium. A few days ago all of a sudden, I noticed that when you use a helmet only the left speaker gives sound. It's as if there is no such thing as the right speaker. I emailled Acer Tech support but they did not, and it's been 4 days. The laptop has a HDMI output and a black audio jack with an icon of headphones and SPDIF letters.
I also tried to uninstall the audio thingys in the Device Manager and downloaded the latest drivers, all to nothing does not.
I just had a hunch that completely wipe the hard drive and reinstall windows would solve the problem, as it is difficult to imagine that the audio jack just died (jiggling around does not work). So before I do and before I do a warranty request, I thought that someone would be able to show me how to check the relevant parameters, etc. without completely obliterate the current installation of windows.
Hello
have a. you been able to use the headset without any problem before?
b. any recent hardware/software changes made on your computer?Try to activate microphone amp and check if the problem persists.
1 right click on the speaker icon on the taskbar (lower right corner of the screen).
2. Select the recording devices.
3. Select the headset and click the properties button.
4. in the pop-up window, click the custom tab.
5. place a checkmark for amp Microphone and click on the OK button.If you are still having the same problem then, it must be a problem with taking that your headset is connected. So check with the manufacturer for him.
Let us know if it works.
Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
Cannot start the instance after adding nodes to the cluster
Hello world
After you add a third node to my group, I can't start instance. Error:
Additional information:ORA-01078: failure in processing system parameters ORA-01565: error in identifying file '+DATA/gwt/spfilexxxx.ora' ORA-17503: ksfdopn:2 Failed to open file +DATA/gwt/spfilexxxx.ora ORA-01034: ORACLE not available ORA-27123: unable to attach to shared memory segment Linux-x86_64 Error: 13: Permission denied
I use Centos 5.8 and Oracle 11.2.0.3. Thanks in advance[grid@nodedc3 ~]$ crsctl query css votedisk ## STATE File Universal Id File Name Disk group -- ----- ----------------- --------- --------- 1. ONLINE 7887e29070204f52bfda4091940f4672 (ORCL:VOTE_OCR) [OCR_VOTE] Located 1 voting disk(s). [grid@nodedc3 ~]$ srvctl status asm -a ASM is running on nodedc3,nodedc2,nodedc1 ASM is enabled. [grid@nodedc3 ~]$ ps -ef | grep lsnr | grep -v 'grep' | grep -v 'ocfs' | awk '{print $9}' LISTENER_SCAN2 LISTENER [grid@nodedc3 ~]$ olsnodes -n nodedc1 1 nodedc2 2 nodedc3 3 [grid@nodedc3 ~]$ crs_stat -t -v Name Type R/RA F/FT Target State Host ---------------------------------------------------------------------- ora.DATA.dg ora....up.type 0/5 0/ ONLINE ONLINE nodedc1 ora.FRA.dg ora....up.type 0/5 0/ ONLINE ONLINE nodedc1 ora....ER.lsnr ora....er.type 0/5 0/ ONLINE ONLINE nodedc1 ora....N1.lsnr ora....er.type 0/5 0/0 ONLINE ONLINE nodedc2 ora....N2.lsnr ora....er.type 0/5 0/0 ONLINE ONLINE nodedc3 ora....N3.lsnr ora....er.type 0/5 0/0 ONLINE ONLINE nodedc1 ora....VOTE.dg ora....up.type 0/5 0/ ONLINE ONLINE nodedc1 ora.asm ora.asm.type 0/5 0/ ONLINE ONLINE nodedc1 ora.cvu ora.cvu.type 0/5 0/0 ONLINE ONLINE nodedc1 ora.gsd ora.gsd.type 0/5 0/ OFFLINE OFFLINE ora.gwt.db ora....se.type 0/2 0/1 ONLINE ONLINE nodedc1 ora....network ora....rk.type 0/5 0/ ONLINE ONLINE nodedc1 ora....SM1.asm application 0/5 0/0 ONLINE ONLINE nodedc1 ora....C1.lsnr application 0/5 0/0 ONLINE ONLINE nodedc1 ora....dc1.gsd application 0/5 0/0 OFFLINE OFFLINE ora....dc1.ons application 0/3 0/0 ONLINE ONLINE nodedc1 ora....dc1.vip ora....t1.type 0/0 0/0 ONLINE ONLINE nodedc1 ora....SM2.asm application 0/5 0/0 ONLINE ONLINE nodedc2 ora....C2.lsnr application 0/5 0/0 ONLINE ONLINE nodedc2 ora....dc2.gsd application 0/5 0/0 OFFLINE OFFLINE ora....dc2.ons application 0/3 0/0 ONLINE ONLINE nodedc2 ora....dc2.vip ora....t1.type 0/0 0/0 ONLINE ONLINE nodedc2 ora....SM3.asm application 0/5 0/0 ONLINE ONLINE nodedc3 ora....C3.lsnr application 0/5 0/0 ONLINE ONLINE nodedc3 ora....dc3.gsd application 0/5 0/0 OFFLINE OFFLINE ora....dc3.ons application 0/3 0/0 ONLINE ONLINE nodedc3 ora....dc3.vip ora....t1.type 0/0 0/0 ONLINE ONLINE nodedc3 ora.oc4j ora.oc4j.type 0/1 0/2 ONLINE ONLINE nodedc1 ora.ons ora.ons.type 0/3 0/ ONLINE ONLINE nodedc1 ora.scan1.vip ora....ip.type 0/0 0/0 ONLINE ONLINE nodedc2 ora.scan2.vip ora....ip.type 0/0 0/0 ONLINE ONLINE nodedc3 ora.scan3.vip ora....ip.type 0/0 0/0 ONLINE ONLINE nodedc1 [grid@nodedc3 ~]$ crs_stat -t -v | grep ams [grid@nodedc3 ~]$ crs_stat -t -v | grep asm ora.asm ora.asm.type 0/5 0/ ONLINE ONLINE nodedc1 ora....SM1.asm application 0/5 0/0 ONLINE ONLINE nodedc1 ora....SM2.asm application 0/5 0/0 ONLINE ONLINE nodedc2 ora....SM3.asm application 0/5 0/0 ONLINE ONLINE nodedc3 [grid@nodedc3 ~]$ ocrcheck Status of Oracle Cluster Registry is as follows : Version : 3 Total space (kbytes) : 262120 Used space (kbytes) : 3068 Available space (kbytes) : 259052 ID : 1523128137 Device/File Name : +OCR_VOTE Device/File integrity check succeeded Device/File not configured Device/File not configured Device/File not configured Device/File not configured Cluster registry integrity check succeeded Logical corruption check bypassed due to non-privileged user
Edited by: 922736 2013-05-13 23:51Hello
Sometimes, we are not able to access ASM for creation of database due to permissions on a file ' Gride_Home/bin/oracle' owner should be like this:
-rwsr-s - x 1 grid oinstall 152462728 October 12, 2012 /u01/app/11.2.0/grid/bin/oracle
-
Satellite M300 - works only one USB port on the right side
Hello
in the series of M, Toshiba M300 satellite (red), there is a port USB combo and something else, and also another USB port ordinary on the * left * side of the laptop. There is also a USB port on the * right * side.
Currently, for some reason, on my right, the USB port works (in other words, the laptop detects) and my left side, where there are 2 USB ports, it does not work (in other words, it does not detect it) I have no idea how solve this problem.And what happens if you connect the external USB mouse?
It work?> I have the toshiba recovery of the burned disc, should I use it?
Why not, you can test it with the new operating system preinstalled too.
Maybe you are looking for
-
How to restore the old window download in firefox browser worm 26?
The old download window has helped me see my video through Downloader of video downloading side by side in the same time, thus allowing me to cancel it if found unfit after a few minutes. Even I could open the folder to view a few bites that have bee
-
I tried all the steps recommended to speed up the boot sequence, but there are still at least 30, imutes of power until I can run programs or connect to the internet. How can I solve it and solve the problem? Dianthus
-
Problema con clave del producto
MI problema are not themselves como activar clave Windows 7. Tengo una vidéoconférence don't con los datos pero no is como hacer para activarla, me dice of Quebec sale una ventana as this product no copia're valido o can be una.
-
Images already processed with the old version of lightroom and ACR?
I just did a wedding and have hundreds of process photos with my old version of lighroom and ACR. What happens to my images?I don't want to start over these images of reprocessing.
-
Expert overview stopped playing the sound on track 1. How it went?
Expert overview stopped playing the sound on track 1. How it went?