start the instance failed on linux...

My database starts automatically with the start of linux... but I made a few changes in the NETWORK CONFIGURATION changed hostname: hostname TEST: local.localdomain

now, again, I have reset its value previous hostname: local.localdomain

When that I log out and when you connect, I get the following message:

Could not look up internet address for localhost. This will prevent the GNOME to work correctly.
It may be possible to correct the problem by adding localhost.localdoman to the/etc/host file

When I login I the Oracle instance not started automatically...

When I run the startup... I get below error:
[ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1] [] [] [], [],]

Well, it's one of these some errors which can be solved using only without support. What is happening is that your db is not able to find the host name, and it cannot start. The reason is that you must have a DHCP based machine. In your/etc/hosts, it must that any input should and the output of hostname-f must not enter. If it is Yes, then you must add the IP address to your/etc/hosts as. Read this post of mine where I describe the solution of the same mistake.

http://oracleadmins.WordPress.com/2008/08/06/ora-00600keltnfy-ldminit/

HTH
Aman...

Tags: Database

Similar Questions

  • Start the clusterware (CRS) without starting the instance in a node

    version is > 11.2.0.1
    operating system: Solaris 5.10

    Using
    #$GRID_HOME/bin/crsctl start crs
    I can start the CRS in a node. But I don't want to start the instance in this node. I just want to start the clusterware and ASM instance in this node.
    No idea how I can do this?


    Haven't seen this option in the Help menu for crsctl
    # ./crsctl -h
Usage: crsctl add       - add a resource, type or other entity
       crsctl backup    - back up voting disk for CSS
       crsctl check     - check a service, resource or other entity
       crsctl config    - output autostart configuration
       crsctl debug     - obtain or modify debug state
       crsctl delete    - delete a resource, type or other entity
       crsctl disable   - disable autostart
       crsctl discover  - discover DHCP server
       crsctl enable    - enable autostart
       crsctl get       - get an entity value
       crsctl getperm   - get entity permissions
       crsctl lsmodules - list debug modules
       crsctl modify    - modify a resource, type or other entity
       crsctl query     - query service state
       crsctl pin       - Pin the nodes in the nodelist
       crsctl relocate  - relocate a resource, server or other entity
       crsctl replace   - replaces the location of voting files
       crsctl release   - release a DHCP lease
       crsctl request   - request a DHCP lease
       crsctl setperm   - set entity permissions
       crsctl set       - set an entity value
       crsctl start     - start a resource, server or other entity
       crsctl status    - get status of a resource or other entity
       crsctl stop      - stop a resource, server or other entity
       crsctl unpin     - unpin the nodes in the nodelist
       crsctl unset     - unset a entity value, restoring its default

    Hello

    You cannot give this information directly at the start of clusterware.
    This option is to disable the resources, you do not want to start before running the node.
    Note: You can do it from another node, to disable the startup on the node that you want to start:

    In general, you can do this with
    Disable srvctl $

    The correct syntax depends on the type of management you used.
    Managed political use of databases:

    srvctl disable the d - n database

    Administrator management databases:

    srvctl disable instance d -i "".

    Concerning
    Sebastian

  • Cannot start the instance with srvctl only sqlplus

    Hello

    I must be missing something very obvious here... I can't launch the instances on our 2 CCR node with srvctl (fine get all others managed by cluster service/listeners/etc), but if I use sqlplus + start, all right.

    Oracle Standard Edition 11.1.0.7 on Linux x 86-64
    Instances: bopa1 + bopa2
    Nodes: bls0114 + bls0115

    The error I get is:
    -----
    bls0115:ora. Bopa.bopa2.inst:
    bls0115:ora. Bopa.bopa2.inst:SQL * more: version 11.1.0.7.0 - Production on Sun Oct 21 16:12:59 2012
    bls0115:ora. Bopa.bopa2.inst:
    bls0115:ora. Bopa.bopa2.inst:Copyright (c) 1982, 2008, Oracle. All rights reserved.
    bls0115:ora. Bopa.bopa2.inst:
    bls0115:ora. Bopa.bopa2.inst: Enter-username: connect to an idle instance.
    bls0115:ora. Bopa.bopa2.inst:
    bls0115:ora. Bopa.bopa2.inst:SQL > ORA-00119: invalid specification for the system REMOTE_LISTENER parameter
    bls0115:ora. Bopa.bopa2.inst:ORA - 00132: error syntax or network name not resolved "LISTENERS_BOPA."
    bls0115:ora. Bopa.bopa2.inst:ORA - 01078: failure in the treatment of system settings
    bls0115:ora. Bopa.bopa2.inst:SQL > disconnected
    bls0115:ora. Bopa.bopa2.inst:
    CRS-0215: could not start resource 'ora.bopa.bopa2.inst '.
    -----
    Looking lsnrctl status, I don't see that LISTENER_host name on the nodes, has something to do with it?

    The cluster has been newly installed and works fine otherwise.

    Published by: traore on 25 October 2012 14:25

    Hello

    you have defined a REMOTE_LISTENER parameter in the database which can be solved with the TNSNAMES.ora uses the clusterware.

    Then 2 possibilities:

    (a.) your tnsnames.ora to the dbhome contains no entry of the LISTENERS_BOPA.
    (b) you use a tnsnames.ora different due to the use of the TNS_ADMIN variable. It's probably settled in the sqlplus environment, but not on the level of database/instance when clusterware tries to start.

    Set it with:
    setenv srvctl database d t ' "TNS_ADMIN =".

    or perhaps at the level of the instance (instance of setenv srvctl - but I'm not sure it exists.) Sorry no atm 11.1 cluster to check).

    Concerning
    Sebastian

  • Leave only one participant who started the instance runs workitems

    Hello

    I want that some work items in my case to be executed by the participant who created the instance.

    I tried setting participant.sticky = true in the BeginIn of the process but did not work.

    Please tell me how to get there.

    Thank you
    Elina

    Edited by: 22 Elina_ Ιαν 2013 03:35 μμ

    Hi Elina,

    One way to do this in 10g would be to add this logic in an automatic activity immediately preceding your Interactive activity:

    participant.next = creation.participant

    'Participant' and 'creation' variables are variables predefined which is created automatically when a new work item instance is created. By the "participant.next" parameter, you say engine Oracle BPM work item must only show a person (from the default value of the being in the queue of each person who plays) in the queue. Setting it to "creation.particpant", that you want to set it to the person who created the work item instance.

    Dan

  • Cannot start the instance after adding nodes to the cluster

    Hello world

    After you add a third node to my group, I can't start instance. Error:
    ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+DATA/gwt/spfilexxxx.ora'
ORA-17503: ksfdopn:2 Failed to open file +DATA/gwt/spfilexxxx.ora
ORA-01034: ORACLE not available
ORA-27123: unable to attach to shared memory segment
Linux-x86_64 Error: 13: Permission denied
    Additional information:
    [grid@nodedc3 ~]$ crsctl query css votedisk
##  STATE    File Universal Id                File Name Disk group
--  -----    -----------------                --------- ---------
 1. ONLINE   7887e29070204f52bfda4091940f4672 (ORCL:VOTE_OCR) [OCR_VOTE]
Located 1 voting disk(s).
[grid@nodedc3 ~]$ srvctl status asm -a
ASM is running on nodedc3,nodedc2,nodedc1
ASM is enabled.
[grid@nodedc3 ~]$ ps -ef | grep lsnr | grep -v 'grep' | grep -v 'ocfs' | awk '{print $9}'
LISTENER_SCAN2
LISTENER
[grid@nodedc3 ~]$ olsnodes -n
nodedc1 1
nodedc2 2
nodedc3 3
[grid@nodedc3 ~]$ crs_stat -t -v
Name           Type           R/RA   F/FT   Target    State     Host
----------------------------------------------------------------------
ora.DATA.dg    ora....up.type 0/5    0/     ONLINE    ONLINE    nodedc1
ora.FRA.dg     ora....up.type 0/5    0/     ONLINE    ONLINE    nodedc1
ora....ER.lsnr ora....er.type 0/5    0/     ONLINE    ONLINE    nodedc1
ora....N1.lsnr ora....er.type 0/5    0/0    ONLINE    ONLINE    nodedc2
ora....N2.lsnr ora....er.type 0/5    0/0    ONLINE    ONLINE    nodedc3
ora....N3.lsnr ora....er.type 0/5    0/0    ONLINE    ONLINE    nodedc1
ora....VOTE.dg ora....up.type 0/5    0/     ONLINE    ONLINE    nodedc1
ora.asm        ora.asm.type   0/5    0/     ONLINE    ONLINE    nodedc1
ora.cvu        ora.cvu.type   0/5    0/0    ONLINE    ONLINE    nodedc1
ora.gsd        ora.gsd.type   0/5    0/     OFFLINE   OFFLINE
ora.gwt.db     ora....se.type 0/2    0/1    ONLINE    ONLINE    nodedc1
ora....network ora....rk.type 0/5    0/     ONLINE    ONLINE    nodedc1
ora....SM1.asm application    0/5    0/0    ONLINE    ONLINE    nodedc1
ora....C1.lsnr application    0/5    0/0    ONLINE    ONLINE    nodedc1
ora....dc1.gsd application    0/5    0/0    OFFLINE   OFFLINE
ora....dc1.ons application    0/3    0/0    ONLINE    ONLINE    nodedc1
ora....dc1.vip ora....t1.type 0/0    0/0    ONLINE    ONLINE    nodedc1
ora....SM2.asm application    0/5    0/0    ONLINE    ONLINE    nodedc2
ora....C2.lsnr application    0/5    0/0    ONLINE    ONLINE    nodedc2
ora....dc2.gsd application    0/5    0/0    OFFLINE   OFFLINE
ora....dc2.ons application    0/3    0/0    ONLINE    ONLINE    nodedc2
ora....dc2.vip ora....t1.type 0/0    0/0    ONLINE    ONLINE    nodedc2
ora....SM3.asm application    0/5    0/0    ONLINE    ONLINE    nodedc3
ora....C3.lsnr application    0/5    0/0    ONLINE    ONLINE    nodedc3
ora....dc3.gsd application    0/5    0/0    OFFLINE   OFFLINE
ora....dc3.ons application    0/3    0/0    ONLINE    ONLINE    nodedc3
ora....dc3.vip ora....t1.type 0/0    0/0    ONLINE    ONLINE    nodedc3
ora.oc4j       ora.oc4j.type  0/1    0/2    ONLINE    ONLINE    nodedc1
ora.ons        ora.ons.type   0/3    0/     ONLINE    ONLINE    nodedc1
ora.scan1.vip  ora....ip.type 0/0    0/0    ONLINE    ONLINE    nodedc2
ora.scan2.vip  ora....ip.type 0/0    0/0    ONLINE    ONLINE    nodedc3
ora.scan3.vip  ora....ip.type 0/0    0/0    ONLINE    ONLINE    nodedc1
[grid@nodedc3 ~]$ crs_stat -t -v | grep ams
[grid@nodedc3 ~]$ crs_stat -t -v | grep asm
ora.asm        ora.asm.type   0/5    0/     ONLINE    ONLINE    nodedc1
ora....SM1.asm application    0/5    0/0    ONLINE    ONLINE    nodedc1
ora....SM2.asm application    0/5    0/0    ONLINE    ONLINE    nodedc2
ora....SM3.asm application    0/5    0/0    ONLINE    ONLINE    nodedc3
[grid@nodedc3 ~]$ ocrcheck
Status of Oracle Cluster Registry is as follows :
         Version                  :          3
         Total space (kbytes)     :     262120
         Used space (kbytes)      :       3068
         Available space (kbytes) :     259052
         ID                       : 1523128137
         Device/File Name         :  +OCR_VOTE
                                    Device/File integrity check succeeded

                                    Device/File not configured

                                    Device/File not configured

                                    Device/File not configured

                                    Device/File not configured

         Cluster registry integrity check succeeded

         Logical corruption check bypassed due to non-privileged user
    I use Centos 5.8 and Oracle 11.2.0.3. Thanks in advance

    Edited by: 922736 2013-05-13 23:51

    Hello

    Sometimes, we are not able to access ASM for creation of database due to permissions on a file ' Gride_Home/bin/oracle' owner should be like this:

    -rwsr-s - x 1 grid oinstall 152462728 October 12, 2012 /u01/app/11.2.0/grid/bin/oracle

  • "Click to start the configuration failed '?

    When I try to open my documents, I get an error message from click to run the application manager that says click to launch configuration failed. What should I do?

    Hi hogiCo,
     
    -With what kind of documents you receive this error message?
     
    From my research, I find that this error message occurs with Word documents. Therefore, I recommend you post your query in Office Word Forums for assistance on this issue given that the experts who can address this issue with a lot of ease out there.

  • Microsoft Security Update 11/01/2012 installed including Service Pack 2 and now start the computer fails. No Windows security, no system restore.

    Can't start at a fixed point to the password screen. Goes to a blue screen and try to restart automatically.  When you run safe mode cannot use the system restore, have no security of windows, so does not automatically restart when the change is made impossible to read.  Norton 360 found two viruses at the origin and the fixed, no viruses detected in recent failure.

    Hello

    You can use the full version of Windows Vista installation disc and try to perform a restore of the system, the Windows recovery environment and check.

    For more information, you can consult the following article ot.

    What are the system recovery options in Windows Vista?

  • Can't start RAC instance

    Hello

    We have two-node Oracle RAC (11.2.0.3) and one instance got crashed. Could not start the instance and gave the command two start the instance below.

    srvctl start instance d-i ACCELA1 accela

    get error below

    RPRC-1013: failed to start of ora.accela.db resources

    RPRC-1064: could not start ora.accela.db of resources on the node adbcprora01

    CRS-2527: cannot start 'ora.accela.db', because it has an addiction "hard" ' ora. DG_DATAFILES. DG'

    CRS-2503: resource ' ora. DG_DATAFILES. DG' is in unknown state and must be stopped first.

    Hello

    You could try stopping and starting of the database?

    ++ srvctl stop database d accela

    ++ srvctl start database accela d

    Kind regards

    Vautrin - Oracle

  • I can't move the cursor once I start the game Madden NFL 08.

    Original title: Madden nfl 08 problem

    I have windows 7, after I start the game when say "click to start" the cursor fail, I can't move the cursor

    Hello
     
     
    1. have you made changes on the computer recently?
    2 do you have this game never properly run on your computer?

    Method 1.
    Check if it is set to the correct resolution. Before starting the game controls the display settings in the game.
    In addition, you can try to change the hardware acceleration and then check. Here's how:
    a. right click on a space empty on the desktop.
    b. go to the resolution of the screen.
    c. click Advanced settings, and then click the "troubleshooting."
    d. set the hardware acceleration in the middle. (You will get the option only if your video card supports).

    Method 2.
    Another possibility could be a third-party application is at the origin of the conflict.
    See the article below for instructions on how to start your computer in a clean boot state.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
     
    You can also consult about it with game Publisher EA Sports. 
     
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Bad system setting, cannot start the database

    Hello, I have problem with start my database

    C:\Users\Raw>sqlplus "/ as sysdba"


SQL*Plus: Release 11.2.0.1.0 Production on Thu May 28 15:23:34 2015


Copyright (c) 1982, 2010, Oracle.  All rights reserved.


Connected to an idle instance.

SQL> startup
ORACLE instance started.


Total System Global Area 1068937216 bytes
Fixed Size                  2182592 bytes
Variable Size             587203136 bytes
Database Buffers          473956352 bytes
Redo Buffers                5595136 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-30012: undo tablespace 'UNDOTS3' does not exist or of wrong type
Process ID: 2716
Session ID: 5 Serial number: 3

SQL> startup mount
ORACLE instance started.


Total System Global Area 1068937216 bytes
Fixed Size                  2182592 bytes
Variable Size             587203136 bytes
Database Buffers          473956352 bytes
Redo Buffers                5595136 bytes
Database mounted.
SQL> show parameter undo


NAME                                 TYPE        VALUE
------------------------------------ ----------- ------------------------------
undo_management                      string      AUTO
undo_retention                       integer     900
undo_tablespace                      string      UNDOTS3
SQL> select * from v$tablespace;


       TS# NAME                           INC BIG FLA ENC
---------- ------------------------------ --- --- --- ---
         0 SYSTEM                         YES NO  YES
         1 SYSAUX                         YES NO  YES
         2 UNDOTBS1                       YES NO  YES
         4 USERS                          YES NO  YES
         3 TEMP                           NO  NO  YES
         6 ARB_TABLESPACE                 YES NO  YES
         7 ARB2_TABLESPACE                YES NO  YES
         5 UNDOTBS2                       YES NO  YES
         8 TEMP2                          NO  NO  YES
         9 UNDOTBS3                       YES NO  YES


10 rows selected.


SQL> alter system set undo_tablespace=UNDOTBS3 scope=both;
alter system set undo_tablespace=UNDOTBS3 scope=both
*
ERROR at line 1:
ORA-02097: parameter cannot be modified because specified value is invalid
ORA-01219: database not open: queries allowed on fixed tables/views only

SQL> alter database open
  2  ;
alter database open
*
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-30012: undo tablespace 'UNDOTS3' does not exist or of wrong type
Process ID: 1128
Session ID: 5 Serial number: 3

SQL>

    When I have a parameter not valid, the I often resolve when the database does not open is to simply create a pfile the spfile file:

    sqlplus

    Connect / as sysdba

    create pfile='/home/oracle/pfile.txt 'to spfile='/u01/app/oracle/product/12.1.0.2/dbs/spfileorcl.ora ';

    Then use a text editor to fix the value of the parameter. When done, save the changes. Then create spfile from pfile this and you should be able to start the instance.

    create spfile='/u01/app/oracle/product/12.1.0.2/dbs/spfileorcl.ora 'to pfile='/home/oracle/pfile.txt ';

    startup

    HTH,

    Brian

  • Possible strategies to restore a single tablespace of the instance A B

    Hi all

    Then...: Win 7 64 bit
    ... DB: Oracle 11.2.0.3 EE 64-bit

    In my notebook, I have 2 instances (orateste and ora11). They are all intended to test. I don't know what happened, but a problem in a partition of my SO did the unavailable Oracle software. I can't start the instance orateste. Even the windows service that is associated with the instance have disappeared from services.msc. What I want to do is to restore only a tablespace for instance orateste to ora11. I have a full D - 1 rman backup. What are the possible solutions?

    (1) to restore the entire database (orateste - 11.2.0.1) ora11 (11.2.0.3)?

    (2) is there a way to restore only a tablespace between instances and versions?

    Thanks in advance.

    Reinstall the software
    (1) how to create a windows service? Prompt caommand

    oradim-new - sid - intpwd

    If it helps, and take an export of all objects in this table space and import into another database, you can start your old database.

    OR

    Restore the full database using RMAN somwwhere else and that the export of take it from all objects in this tablespace and import them into another database.

    Published by: TSharma on January 17, 2013 11:34

  • Cannot start the database the R12 DR Oracle EBS of RAC 10 g R2 using SRVCTL

    Hello

    I've implemented Oracle 10g R2 RAC data DR Guard for main server Oracle 10 g R2 RAC for EBS R12 (12.0.4).
    I followed Note + ' Business Continuity for Oracle Applications Release 12 on Release 10 gr 2 - Single Instance Database and RAC [452056.1 ID]. +.
    After you configure DR DG, I added DR Database to the Configuration of the Cluster. But I'm not able to start the DR Database via SRVCTL. But able to start the DR Database through Sql * more. I have already mentioned Note: + troubleshooting when srvctl cannot start the RAC instance, but sqlplus can start [ID 844272.1] + and tried to solve the problem but without success.

    , I opened SR but still, the problem is not resolved. Are there steps I need to do that is not mentioned in Note 452056.1.

    Rgds,
    Thiru

    Have you reviewed these docs?

    CRS - 215 srvctl cannot start ASM, listener, %ORACLE_HOME%/bin/ resources RDBMS with error [740319.1 ID]
    Could not start the Instance with Srvctl, no Info in the newspapers of Imon [ID 741212.1]

    Thank you
    Hussein

  • Start the server using OPMN Essbase.

    Hello

    We plan to launch Essbase server using OPMN.

    Version: 11.1.2.1

    Currently, we use this line of code below in our command script to start Essbase server, but we wanted to start the Essbase.

    $ARBORPATH/bin/startEssbase.sh b

    I have gone through the document and came to know that I need to use the commnad below to start the Essbase server by using the command below.

    opmnctl startproc ias-component is EssbaseInstanceName.

    My question is, can I keep the same line of code in my existing batch script to start the Essbase Server?


    Someone at - it one called this (ias = EssbaseInstanceName opmnctl startproc component) line of code in the start menu to the top/batch scripts? As we implement first.

    Please share your thoughts and your sugguestions. your help is very appreciated.


    Thank you
    Ganesh.

    The startEssbase.sh script will start to OPMN and start the instance of essbase via OPMN

    opmnctl startproc ias-component = EssbaseInstanceName

    essbase using OPMN will start if OPMN is already running.

    See you soon

    John
    http://johngoodwin.blogspot.com/

  • The TNS service name gives preference to connect the instance that is in a mount

    OS: HPUX
    Oracle version: 11.1.0.7

    Why TNS service name give preference to connect the instance that is in a mode of installation and the dsiaply ' ORA-01033' as mentioned below.»
    I wanted to connect the single instance that are OPEN (no EDITING) using connection string and want to know the status of all instances using SQL query "select instance_name, status of gv$ instance. How can I achieve this?

    I have four-node rac and instance cluster four, one instance on each node and the State of the instances are as shown below

    SQL > select instance_name, status of gv$ instance;

    STATUS INSTANCE_NAME
    ---------------- ------------
    dtrac1 OPEN
    Dtrac4 ROAD
    dtrac3 OPEN
    dtrac2 FORCE

    I tried to connect using the name of the service "dtrac" (the tnsnames Details give below) any node, it gives priority to the instance that is set up and shows the sequence of error messages

    SQL > conn system/vcs@dtrac
    ERROR:
    ORA-01033: ORACLE initialization or shutdown in the process ID: ID of Session 0: serial number 834: 139


    WARNING: You are more connected to ORACLE.
    SQL > conn system/vcs@dtrac
    ERROR:
    ORA-01033: ORACLE initialization or shutdown in the process ID: ID of Session 0: serial number 834: 139


    SQL > conn system/vcs@dtrac
    ERROR:
    ORA-01033: ORACLE initialization or shutdown in the process ID: ID of Session 0: serial number 834: 139
    SQL >


    When I change dtrac2 instance in NOMOUNT or OPEN State, then connection correctly goes to instances that are open.

    TNSNAME.ora file:
    ==================


    tnsnames.ora # Network Configuration file: /oracle/db11g/network/admin/tnsnames.ora
    # Generated by Oracle configuration tools.

    DTRAC =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP) (HOST = slpal05-vip)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP) (HOST = slpal06-vip)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP) (HOST = slpal07-vip)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP) (HOST = slpal08-vip)(PORT = 1521))
    (LOAD_BALANCE = yes)
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = dtrac)
    )
    )

    DTRAC4 =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP) (HOST = slpal08-vip)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = dtrac)
    (INSTANCE_NAME = dtrac4)
    )
    )

    DTRAC3 =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP) (HOST = slpal07-vip)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = dtrac)
    (INSTANCE_NAME = dtrac3)
    )
    )

    DTRAC2 =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP) (HOST = slpal06-vip)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = dtrac)
    (INSTANCE_NAME = dtrac2)
    )
    )

    DTRAC1 =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP) (HOST = slpal05-vip)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = dtrac)
    (INSTANCE_NAME = dtrac1)
    )
    )

    LISTENERS_DTRAC =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP) (HOST = slpal05-vip)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP) (HOST = slpal06-vip)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP) (HOST = slpal07-vip)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP) (HOST = slpal08-vip)(PORT = 1521))
    )

    LISTENER_DTRAC4 =
    (ADDRESS = (PROTOCOL = TCP) (HOST = slpal08-vip)(PORT = 1521))


    LISTENER_DTRAC3 =
    (ADDRESS = (PROTOCOL = TCP) (HOST = slpal07-vip)(PORT = 1521))


    LISTENER_DTRAC2 =
    (ADDRESS = (PROTOCOL = TCP) (HOST = slpal06-vip)(PORT = 1521))


    LISTENER_DTRAC1 =
    (ADDRESS = (PROTOCOL = TCP) (HOST = slpal05-vip)(PORT = 1521))

    Too bad, I was hoping that it would work with srvctl

    [email protected] wrote:
    As you say a different way of configuring the service by referring to the favorite and attributes available for instances, but its not useful to know the instances that are open. Its helpful to separate the work to specific nodes by creating different services for different applications.

    Certainly, it only would be logical if you know in advance that you want to start an instance in editing mode and you want to bypass the connection failure. But when you know you're going to just mount a database he used to try to find later.

    I searched a bit on metalink and found notes 69546.1 which States that PMON will record with listeners the and remote start the instance, same no editing is required. Which is obviously stupid because of the error message you get when you try to connect.

    797713.1 note describes your exact problem and a solution. I'd love to quote, but I'm not sure if this is allowed or not. So instead I'll summarize what I learned: the default service that you create during the installation of first CARS behave as in one instance. As soon as the instance starts, it will register with the other. This is actually intended for you can perform administration. When you create additional services via srvctl or crs, they will somehow managed by crs and only you sign up once the instance is 'up' (I guess they mean open).
    So the solution would be to create another service through srvctl and use it for your connections.

    Bjoern

  • This error: failed to start the Server Instance because the integrated Weblogic domain has not been built successfully.

    Hi Experts,

    JDeveloper 11.1.1.4.0 version, Windows 7.

    I installed jdeveloper 11g Studio Edition Version 11.1.1.4.0.

    «I'm trying to start the integrated by weblogic server: start run instancei Server weblogic the next ERREURLa get, Server Instance may not start because the integrated Weblogic domain was built not log successfully.the as a result of info"D:\Oracle\Middleware\oracle_common\common\bin\wlst.cmd ' C:\Users\aroy\AppData\Roaming\JDeveloper\system11.1.1.4.0\o.j2ee.adrs\CreateDefaultDomain.py «»

    I tried searching but could not solve this problem.

    Reinstalled Jdeveloper, formatted my system did not work. Different version of JDeveloper also gives the same error in my system.

    One thing when I go to the folder structure, I can see the default domain contains only the config folder. The rest are missing.

    Also, I have all the rights of administrator on all folders/subfolders. I can create a separate domain and run the weblogic. But I can't start the new instance of JDeveloper. I get the same error.

    Thank you

    Roy.

    Also, what OS you are using?  I had a similar problem under win8

Maybe you are looking for