Start-up & shutdown process
Y at - it another way to shorten start & stop process [outside disabling Boot Up menu/delete Prefetch > c: Windows / Sleep Mode]
I use the version of Toshiba Satellite [portable] Wireless/Intel Core i3/OS: Windows 7 Service Pack 1/IE10/Bios [MAJ] / 64 bit/4 GB [/] / all updates/important recommended Windows [installed] [500 GB] / all Driver/Hardware [MAJ]... Starting process > 50 s Shut Down process > 20 sec.
Hello
Tags: Windows
Similar Questions
-
When I try to shut down my computer with Firefox running, it does not close properly during the closing. Instead, it crashes (as described in this article) and will continue to do so until I have stop the shutdown process and close it manually, where it will still not respond. There is the substantive issue. Here is the list of the relevant data to identify more precisely:
On the list of programs is still active during the closure, the window of Firefox starts only appearing once as it should be, but a few seconds after starting to hang, it begins to appear a second time on the bottom of the list, with the specific name of the page is a duplicate of whatever it is on the original.
This problem does not occur in safe mode, but it is not caused by one of my addons either, as I figured out after disabling all my addons with tools > Modules rather than the safe mode and still the problem.
He is listed as that passes several times a week, but that is simply because that's how many times I forgot to close Firefox before pressing 'closed' and leaves the room without bothering to check it works. It happens whenever I try to turn off the computer with Firefox is running well.
See this article--> occurs not in Safe Mode
Check and say whether his work after turning off hardware acceleration.
-
I just bought an iphone 6 s second part and I got home put my SIM in there turn it on you try to start the activation process and he says that the phone is lock icloud, I tried calling get him etc. but he gave me the wrong information and I called apple, they said that its nothing they can do without evidence of perchise im broke I spent all my money on the phone, does anyone know any software free or something me please txt to 9102612856
@Santonio99
You probably bought an iPhone stolen 6. Mine was stolen in Barcelona in Spain on June 10 by a pick-pocket. Fortunately, there is absolutely nothing you can do to make an iPhone locked to the activation of the work. You have a paper weight.
-
What it means exactly when your computer say-"your disc is a failure, start the backup process."? I know that's not good, but what is it? And that's something that I can fix with some instruction? Thank you, Brandi
Hello
If the message is correct, your hard drive is defective and must be replaced
Your hard drive contains the operating system and all your files, photos, music, etc.
Back up your data:
make backups on an external hard drive or DVD
see if this information helps you
How to make a backup of your data (all Vista versions)
http://www.vista4beginners.com/how-to-backup-your-data
How to restore your files
http://www.vista4beginners.com/how-to-restore-files
the 1st link below is how do the backup complete pc (Vista, full and professional company)
http://www.bleepingcomputer.com/tutorials/tutorial145.html
and that is how do to recover the backup complete pc
http://www.bleepingcomputer.com/tutorials/tutorial144.html
and here is the information of microsoft in restoring a system image backup
http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup
-
bought photoshop elements several weeks ago and started the download process, but I had to stop... needed to upgrade my mac so I could continue... now it won't let me continue and download the program. What should I do to correct this?
What do you mean won't you of... What is the error message?
kglad links in response to #1 here can help https://forums.adobe.com/thread/1930162
-
ERROR ORA-12514: TNS: could not start the extraction process
Hi Experts,
I have installed Oracle Golden Gate in the slot environment. But failed to start the extraction process
Main site (source): it is production DB up and running.
RAC 2 nodes
Oracle RAC 11.2.0.1.0
ASM
Oracle GoldenGate 11g Release 1 (11.1.1.0.0)
Enterprise Linux Server version 5.5 (Carthage)
X 64 processor type
64-bit operating system
target Site (destination):
Single stand-alone server - no CARS
Version 11.2.0.1.0 Oracle
ASM
Oracle GoldenGate 11g Release 1 (11.1.1.0.0)
Enterprise Linux Server version 5.5 (Carthage)
X 64 processor type
64-bit operating system
Getting error in newspapers below while starting the extraction process:
[oracle @ ggate] $RECOVERY: reset to initial or altered checkpoint. 2012-08-05 10:34:10 ERROR OGG-00868 Oracle GoldenGate Capture for Oracle, aaa.prm: Attaching to ASM server asm: (12514) ORA-12514: TNS:listener does not currently know of service requested in connect descriptor. 2012-08-05 10:34:10 ERROR OGG-01668 Oracle GoldenGate Capture for Oracle, aaa.prm: PROCESS ABENDING.
Getting error below when connecting with the instance asm directly:
AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on August 5, 2012 11:55[oracle@ admin]$ sqlplus sys@asm as sysasm SQL*Plus: Release 11.2.0.1.0 Production on Sun Aug 5 11:16:11 2012 Copyright (c) 1982, 2009, Oracle. All rights reserved. Enter password: ERROR: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor [oracle@ ~]$ tnsping asm
: 42
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Use settings files:
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = xxx-
Scan) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ASM) (I
NSTANCE_NAME = + ASM1)))
OK (0 msec)Any help Please ? Regards LazyDBA Edited by: LazyDBA11g on Aug 5, 2012 12:14 AM Edited by: LazyDBA11g on Aug 5, 2012 11:25 PM Edited by: LazyDBA11g on Aug 12, 2012 4:36 AM
It should help you to TRANLOGOPTIONS ASMUSER
http://oracleabout.blogspot.com/2012/06/GoldenGate-on-ASM-GoldenGate-on-RAC.html
-
Disable "start a new process with the data of this task.
Hi all
As the title says, I would like to disable "start a new process with the data of this task.
Because I find that it will not work with form preparation process has data, I understand that you can fix by some changes to the procedure of data preparation, but I don't have time at the moment.
Here is the screenshot to show what is a function 'Start a new process with this task data' in the workspace.
Concerning
Bill
I think your only option is to customize the Worksapce interface.
I'm sorry.
Jasmine
-
Lights of fireworks or Dreamweaver to start the design process?
Please tell us which is the best application use to start the design process a site, from the point of view of a print designer code-illiterate - I assumed it would be Dreamweaver but read somewhere recently that I should start in Fireworks (which I always thought was more for the creation of graphical web content optimized).
As a print designer, I use InDesign CS4 (with Photoshop and Illustrator) and would like the tool more logical and intuitive to use to start the work of designing a site with advice.
Once the design is approved I will have someone who knows what they're doing with HTML, CSS and PHP etc to check everywhere and make the delicate bits.
Any help in pointing me in the right direction would be appreciated.
Thank you.
PS - my apologies if this is wrong forum label, but I posted this question yesterday on the Web Design Forum, but then thought that this may be a more appropriate forum to publish.
If you are a designer to create a new design, Fireworks is a great place to start. (I can't imagine trying to design in Dreamweaver, frankly). If you are familiar with Photoshop and Illustrator, you might start with one of these applications, too, but Fireworks has been built to work.
However, Fireworks is not a coding tool. Like Photoshop, it has the ability to export HTML, but the feature is designed to create models, not live sites. After you have your site designed in Fireworks, you or someone else can use Dreamweaver for (re) - produce the design in the code.
You can use Fireworks to statements your vertical grids, placing graphics header and navigation, place-holding text value (remember that HTML text can be resized by our users, places for blocks of text must therefore be able to resize). And Yes, once you have your design, use Fireworks to slice that design and export the graphics optimized for your encoder to use.
-
Start the concurrent processes with PLSQL
How start a simultaneous process using PLSQL for example if I have a report that is running, how can I start a different simultaneous process before it is finished using PLSQL? Is this possible?
Thank youHello Roald,
I suggest you use the package DBMS_SCHEDULER, a powerful tool for managing jobs.
Visit this page [http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_sched.htm#ARPLS138].
Kind regards.
-
Docking station is half visible during the shutdown process
Hello
I did a clean install of El Capitan.
In general, when you shut down the Mac, the Dock usually slide the screen and after a few seconds the Mac stops.
However, with El Capitan, when I stopped the Mac Dock only halfway so that the process of closing slide is underway. So this means, usually a few seconds while the Mac stops and during this time where the dock is still visible at halfway.
I just wanted to know if this is how it works for everyone or there is something funky in this regard?
Thank you.
It's funky.
After an erase and install, everything should work perfectly. What is disk utility > report of first aid?
Try to boot inSafe Mode and see if the problem persists?
Restart now ' shift '.
(Wait to take more time to start in this way because it runs a check of directory first.)
You can try to install the OS X Combo update. It replaces all the system files that are missing or damaged. It does not matter if you have previously applied. All your data and settings must be kept, but that said, you should always have a backup.
Apple - Support - downloads
-
As I mentioned, the dialog box appears after every restart. It occurs after I entered my credentials to logon and proceeded to windows. It seems to be pretty late in the boot process that things like the chat programs and widgets are fully charged at the time wherever the dialog box is displayed.
The dialog box appears to be the 'Open with' dialog box in Windows 7 standard.
Specifically the dialogue reads as follows:
Choose the program you want to open this file:
File: Mathew [it's my user id and he showed not extension)If I open the file into something like Notepad, then the information below is presented (the # s are real numbers, but these looked like mac addresses, so I left)
===========================================================================
List of the interface
##...## ## ## ## ## ## ...... Dell Wireless 1510 Wireless-N WLAN Mini Card
##...## ## ## ## ## ## ...... NVIDIA nForce Networking Controller
#........................... Software Loopback Interface 1
#... # # # # # # # # Card Microsoft ISATAP
#... # # # # # # # # Teredo Tunneling Pseudo-Interface
#... # # # # # # # # Card Microsoft ISATAP #2
===========================================================================IPv4 routing table
===========================================================================
Active routes:
None
Persistent routes:
NoneIPv6 routing table
===========================================================================
Active routes:
None
Persistent routes:
NoneStartup in MSCONFIG includes:
ArcoTray - request for assistance Adobe Acrobat Distiller
Adobe Reader and Acrobat Manager
AVG Internet Security
CyberLink PowerDVD
Dell Support Center updates
Reference Dell Webcam Central
Dell Wireless card wireless network tray Applet WLAND
Google update
GoogleTalk
GrooveMonitor Utility
Digital Imaging HP - hp all-in-one serious
HpqSRmon Application
hpwuSchd Application
IDT Audio of PC
iTunes
Java platform
Logitech SetPoint
Microsoft Windows operating system
Microsoft Windows operating system (Yes, it is listed twice)
NVIDIA Compatible Windows7 Display driver
Quicket
QuickTime
Synaptics Pointing Device Driver
TranscodingServiceSamhrutha,
I solved the problem.
I found that when creating a new user, no longer had the open with dialog box.
I started the process of resolution of a corrupted user profile (which seems little more than creating a new and copy and paste a few old values), when I decided to try one last thing.
I logged on my account corrupted again and when the 'Open with' dialog that I open the file with Notepad. I tried to "save under" to locate the file and found that it was located in C:\Users. Something in recent weeks seems to have put a file without an extension, called "Mathew" (my log in name) in this folder, and it began when I started windows.
I have since deleted the file and am no longer get the "Open with" dialog
Thanks for your support!
Carpet -
Questions on "configure and start the server process" step during the r12 upgrade
There is a not listed in the 11i 12.1.1 to upgrade guide, 'the Server Configure and start processes. It looks like to includes two parts, run autoconfig tire to the database and run the quick installation of second time.
so I have two questions here:
1. looks like the quick second installation is just autoconfig, so can I just run autoconfig instead of the second quick installation?
2. that we'll first? automatic configuration in the database or quick installation service?
Thank you
1. looks like the quick second installation is just autoconfig, so can I just run autoconfig instead of the second quick installation?
AutoConfig will not start the services so I'd run fast install and it should run the automatic configuration for you.
2. that we'll first? automatic configuration in the database or quick installation service?
Quick installation.
Thank you
Hussein
-
Error when start to extract Process (Abbend)
Hello
When I launch the extraction process then it gives me the following error.
GGS ERROR 500 could not find journal archived for wire 1343441 sequence 1 under default destinations
Kind regards
AMSIIWhen the extract was arrested, she was reading an archived newspaper which has been moved or deleted the default destination. When the extract is started again it trying to get back in the same place (SNA) but can't find it.
If you don't want to lose all changes, restore the journal archived to the default destination. Otherwise if you can ignore the previous changes, just restart the excerpt currently, underGGSCI > extract alter
, start now
GGSCI > start extractPublished by: Saran on February 20, 2013 02:17
-
Stop and start the bpel process in 10g
Hello
How can I stop and start a process bpel to automatically set time (say to Saturday 9 pm et we shud stop the bpel process and Sunday 9 HE we shud it again). Pls let me know.
ADIOh... I'm sorry. I have been misunderstood.
I never did, but you can try with the java code (whether in another bpel process or just another application):
API to disable the process BPEL (State = stop) in Oracle soa suite 10 g
Tell me if it works for you.
Arik
-
Failed to start the oidldap process
It used to work fine, but now I get this error, any suggestions
[dcxnim01]: [ldapdcx1]: = > oidctl connect = server ldapdcx1 = config oidldapd = 2 = 3 start instance
NLS_LANG not defined in the environment
Setting NLS_LANG to AMERICAN_AMERICA. AL32UTF8
[gsdsiConnect] ORA-0,
Cannot connect to the database.It gives "could not connect to the database". So, you can check if the DB is running. Also check the process of "listener".
DB is in place, restart the process OID.In addition, as a best practice, use "opmnctl" to start/stop processes OID.
-Aravind Pramod
Maybe you are looking for
-
C: drive guard fill due to Mozilla Crash Reports
Hello Recently, my C: drive keeps filling due to the huge amounts of Crash Reports generated by Mozilla. In a couple of hours use I'm filling 2-3 GB of space. I've identified the culprits are ' * .dmp ' files located in c:\Documents and Settings\Myus
-
Satellite A665-147 - how to unlock the BIOS option?
Hello I have an A665-147, and I want to change the cpu voltage and other things to improve my battery life.But in the BIOS, you can do nothing. I remember my old PC that you could unlock the Advanced mode by pressing alt + F1. Could someone help me?I
-
Hello This is my first post. I recently bought a Thinkpad w540. I think that I have configured the TPM module, but now I don't remember the password for the owner. How to change my password? There don't seem to be anyway. When I try to change the pas
-
When will come out parallel with a new update to work with Apple OS Mountain Lion
When will come out parallel with a new update to work with Apple OS Mountain Lion
-
Hi everyone, this question has a similarity with the following after http://supportforums.BlackBerry.com/T5/Cascades-development/how-to-get-HardwareInfo-in-QML/m-p/21905... I want to view/get a read on IMSI. The problem is that using a similar method