"Start workflow" window remains open

Similar Questions

• Windows that display progress on delete, move, or rename files remain open

  Original title: remove the window remains open.

  Windows Vista indicate the status on deletion, move, or rename files remain open, even if the operations are completed. I have to shut them down in the Task Manager.  All the patches?  Thank you.

  Hi bobes42,

  See the article next to the Intel site:

  http://www.intel.com/support/motherboards/server/s3000ah/sb/CS-023697.htm?wapkw=(Intel+Matrix+Storage)

  I hope this helps!

• Menu start remains open, Flash Windows

  Hello

  I'm having a problem with my computer that I think a lot of people have had, but I can't seem to find a definitive solution for her. My Start menu will not open, and my windows blink and light that I use my computer. The only new program I have installed recently was skinning program WindowBlinds (which, allegedly, makes no changes to the file system). I uninstalled since then, but the problem has not disappeared.

  So far, the virus scans have concocted with nothing. I do the sfc.exe scan now. Y at - there anyone out there who has had this problem and managed to fix it? If so, how do remove you?

  Hello
   
  1. when the question is is produced?
   
  I suggest that you follow these steps and check if it works to solve the problem.
   

  Step 1:

   
  Start your computer in safe mode and check if the start menu stays on and also note if windows blink.
   
  Step 2:
   
  If the problem persists in safe mode, I suspect that there could be a third-party (other than WindowBlinds) software conflict causing the issue to occur. I suggest that you put your computer in a clean boot State. Clean boot eliminates conflicts of third party software.
  Note: Follow step 7 to your computer as usual.
   
  
  Aziz Nadeem - Microsoft Support
   

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Everytime I open a new window or refresh a getting started with firefox page opens with her. So, whenever I go to my homepage for example getting started with firefox opens along the coast in a separate tab.

  Everytime I open a new window or refresh a getting started with firefox page opens with her. So, whenever I go to my homepage for example getting started with firefox opens along the coast in a separate tab.

  This has happened

  Each time Firefox opened

  == I have this computer.

  You are welcome

• When I start my computer I get this error message: Windows cannot open this file: GLBD4EA.tmp

  When I start my computer, I get this error message:

  Windows cannot open this file: GLBD4EA.tmp

  To open this file, Windows needs to know what program you want to use to open it. Windows can go online to look for automatically, or you can manually select from a list of programs installed on your computer.

  What do you do?

  -Use the web service to find the appropriate program
  -Select a program from a list of installed programs

  No selection works for me. I don't know what concerns the .tmp file, or why I need to open it.

  Please help :)

  Hello

   
  Perform the following steps to remove the file from the registry.
  a: type regedit into the search box start and click on enter.
  b: Search now to the following key
  HLKM\SOFTWARE\Microsoft\windows\currentversion\run
   
  then delete the following key
  53E412B3-9907-4F9E-A6DC-D0106D1D72C
   
  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information
  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
   
  Hope this information helps.

• When the operating system starts, a window opens asking me to "choose the program you want to open this file: file: rundll32.exe.".

  original title: 'Open with' problem...

  My office was attacked by malware. I have run virus scan and all updates that were available. When the operating system starts, a window opens asking me to "choose the program you want to open this file: file: rundll32.exe.". There are recommended programs and other programs, but I'm fairly certain that none of them are correct. Can anyone help direct me in the right direction to solving this problem? Every program I try to open, translates into an opening by asking the same question, but the file name changes to whatever program I am trying to the window. Thanks in advance for any help.

  Hello

  Just in case there are persistent pieces of malware here is the method of complete elimination.
  .exe question difficulty in the next message.

  Try Mode safe mode with networking - repeatedly, press F8 that you start.

  The best two methods allow scanners to run and/or AV.exe out of the way or removing.

  1.
  CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager

  Process tab - complete the process on AV. EXE and continue with the uninstall Guide.

  If necessary use start - computer or Windows Explorer to navigate to

  C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
  necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
  is installed.

  Right-click on it and rename it to ZZMbam.COM (or something different than now) and
  Double-click it, and then run it like this. You can rename it back later. Do the same with
  other programs according to the needs. Use this method to others as needed - NOT assume all
  a program deletes all or that it is no other malicious software.

  ---------------------------------------------------

  2.
  Another method is to use them:

  Use Process Explorer to "Suspend" the process will not stop

  Then use AutoRuns to delete the malicious program startup items.

  Now use UnLocker to delete the files in the malware.

  You may need to do a file at a time.

  Process Explorer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  AutoRuns - free
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  UnLocker - free (do not install the adaware Ebay)
  http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtml

  AV.exe

  ==============================================

  The AV.exe malware goes by many names:
  
  XP Internet Security 2010, Antivirus 2010 Vista and Win 7 Antispyware 2010 are thugs
  antivirus, scams for you force to pay for them while they have no advantage at all.

  How to remove Vista Antivirus 2010 as well as the other varieties AV.exe.
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
  
  It can be made repeatedly in Mode safe - F8 tap that you start, however, you should also
  Run them in regular Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
  Use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
  files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

• Outlook 2007. Cannot start Microsoft outlook cannot open outlook window

  When windows update downloaded Security updates, six of them, 2 for windows XP and four security updates for office 2007. My computor due restart. I was not able to open outlook 2007 since then. When it will start, then it just stops and says "cannot start microsoft outlook. cannot open the outlook window. I restarted computor than nothing seams to work. I just installed office small business 2007 three months ago.

  Found answer
  Go to start then run. type in "outlook.exe /resetnavpane.
  be sure to leave a space between exe and the front slash.
  It worked for me.
  Thank you

• Windows Explorer opens whenever I start the PC

  Hello

  I bought my lenovo laptop u410 a few days ago and yesterday the office system map begins suddenly after I booted up.
  How can I stop this? I searched the internet, but none of these solutions work.
  I looked at my card to start, but it is empty. Also, I looked in the registry editor, but unfortunately no luck.
  Can someone help me please? Thank you!
  Original title: desktop card system suddenly starts up?

  Your problem is

  Windows Explorer opens whenever I start the PC

  - - - -

  I suggest that you change the question - just click on the Edit link, you can see right under him [almost where I would be selecting the link address instead].

  - - - - - -

  Also, check these settings: -.

  1 in Windows explorer, Union, file & search options, see tab, [down] restore file when connecting windows - make sure that is not selected.

  2 click the Start button, the cursor on the entry for all programs, right click, select Open, double-click programs, double-click Startup - check that you don't have a Windows Explorer shortcut it.

  3 click the Start button, hover over the entrance for all programs, right-click, select open all users, double-click programs, double-click Startup - check that you don't have a Windows Explorer shortcut it.

• When I try to start lightroom 6 it opens only the first window, but nothing more. ligthroom closed several times, restarted the computer, update system, nothing. What can I do?, when I try to start lightroom 6 it opens only the first.

  When I try to start lightroom 6 it opens only the first window, but nothing more. ligthroom closed several times, restarted the computer, update system, nothing. What can I do?, when I try to start lightroom 6 it opens only the first.

  Hi silvers.

  Please make sure that your graphics card and Lightroom 6 are up-to-date. Latest version of Lightroom is 6.4.

  Please check the FAQ and troubleshooting of Adobe Lightroom GPU and disable the use of the GPU in Lightroom.

  What is your operating system?

  Kind regards

  Assani

• Windows remains in the update from start menu

  My laptop for some reason any will not properly start to Windows Vista.  What happening every time that you start the computer, it goes through the regular boot screens, not the symbol microsoft windows and then goes into screen Vista starts once you have installed the updates and it says exactly this: Configure updates: stage 3 of 3.  In a first time, it is said that it is at 0% and then it rises to 87% and then says "Shutting Down... "restarts the computer and it all over again.  He has not started windows and probably did more than 10 times.  I have a recovery disc I made (this computer is HP and it gives you the opportunity to make a recovery disc) and I put the first and it only slows down the time it takes to restart the "Configuring updates" screen  If someone could please help me and tell me something to do would really be appreciated.

  P.S. I'm not computer illiterate and know more than the normal person on the computers.  The boot order is with the CD first and then the hard drive and it still goes the same screen.  I tried safe mode, and it only makes the larger screen.  Also I don't know if that makes a difference, but the computer could install or download updates when he was arrested.

  MajorWater

  WARNING OF THIRD PARTY SOFTWARE

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Data invalid are written when you burn an ISO image on a DVD disc + R double layer on a computer that is running Windows Vista or Windows Server 2008: http://support.microsoft.com/kb/958914

  This problem occurs for the following reasons:

  • You used a third-party program to extract the contents of a Windows Vista .iso image to a location on a hard disk. Then, you installed Windows Vista from the location on the hard drive.

    Note Some third-party compression programs do not store long file names during the extraction process.

  Engineer Support Justin M. Microsoft Answers visit our Microsoft answers feedback Forumand let us know what you think.

• computer starts window c open drive

  When I put on my computer, it opens a window into the c drive at startup which I have to close it before you use it. How to solve the problem

  With absolutely no information on your system, you can see if this sounds like your situation.

  Otherwise, go ahead and do malware scans anyway and accountable. :

  Do you mean when you restart, Windows explore opens in the windows\system32 folder?

  Microsoft knows why and tell you here:

  http://support.Microsoft.com/?kbid=170086

  Here's what Microsoft does not tell you in this article (a way to back up your registry):

  Before making changes to the registry, back up your registry with this free and easy to use tool popular:
  http://www.SnapFiles.com/get/ERUNT.html

  The reason why your system been this way in the first place is usually due to some malware infections.  It could be an infection of current malware or residue that has been partially removed by your current tools, leaving behind the fake startup entries in your configuration.  You must finish the cleaning yourself.

  Perform scans for malware first, then correct any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

  Don't forget to reboot your system and test, the back of the report please your results.

• Error message "Windows cannot open this file 5882103.rbf" to start the Windows XP machine.

  Original title: Windows cannot open this file 5882103.rbf.

  I get this pop-up window when ever I turn on my computer or restart it... Anyone know why this is, or how to solve this problem?

  Hi presler19,

  I recommend you completely configure the computer in a clean boot state by following the article provided in the previous post. Later, check to see if the problem persists.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to stop sliding windows between open applications

  There is an irritating scenario whereby windows application open slide and disappear instead of (as I him wish) remaining on the desktop.

  If anyone can help by telling how to stop this considerable irritation, please?

  Kind regards

  Séverine

  Don't think I've seen what you describe. Can clarify you this?

• If I click once on an e-mail in the message window while I closed the preview window, I opened that makes e-mail?

  If I click once on an e-mail in the message window while I closed the preview window, I opened that makes e-mail? I worry because I don't want to open a message that my bad-ware download on my computer. If the preview window is closed, I noticed that the number of e-mails read does not change when I click once on e-mail. Can I assume that unread means that it has not been opened.

  Read the answer! Your question is answered there.

  Read / unread is purely an indicator. It has no real meaning. If you go into the menu (alt + T) tools > options > advanced > reading and display, you can change when a mail is marked as read in immediately to 10 seconds (this is what outlook express used) up to 1000 seconds.

  The software marked the email read is that this logic can go. It's always "BOLD", the software did not mark the message read.

  You open the mail? It is an unquantifiable statement.

  In the context of Thunderbird an individual mail is not a discrete element that is stored. It is a part of your data for mail/News. So try to equate open to action just does not fit.

  Thunderbird received mail as a series of lines. He collected in an email that he stores in a file with all your other emails for this folder. You open the file in that the mail is stored? Totally irrelevant Thunderbird opens to get mail every time that mail is added to the folder or to view a mail in this folder.

  Each time a letter is displayed (any mail) the file all your emails for this folder are saved in the opening and reading.

  If clicking on the mail list 'open' the file. Probably not, it was probably already open. The file is opened, read, written to and updated probably half a dozen times since Thunderbird started so if you click on the mail to see won't change anything good at all. If the e-mail file has been closed it will be open to view the contents of the mail, but he is perhaps already open.

  The key is that you try to apply assumptions to mail that simply do not apply. That's why I sound as if I'm going in circles.

  You also may ask, when I fill the kerosene tank my electric light.

  • The software mark mail as read when you say
  • It opens files underlying storage constantly. Clicking on an entry may or may not cause the opening of the file.
  • Your mail is not in a file on its own, it is in a file that contains all the messages in the folder and the mail deleted until the folder is compacted.

• Click on the link-get "Windows cannot open the file" select a program?

  After clicking on link get "Windows cannot open this file" have to manually "selecta program programs installed" Firefox appears as a choice and I double-click. How can I solve this problem / eliminate these extra steps
  ? Thank you Joe
  I am running Windows XP, MS office Outlook 2007

  Is it a link in an e-mail message in Outlook? This problem arises from time to time.

  While Firefox can usually set himself as the proper application to open the URL, you click in other programs, settings are sometimes blur or do not take. This article has tips to solve this problem: setting Firefox as the default browser does not work - what to do. Anything there help?

  If the problem persists, is there something special about how you start Firefox? For example, you have this launch in a security 'sandbox' or virtual machine? You have all the command-line options set to allow several simultaneous sessions of Firefox, or call the Profile Manager? If none of this sounds familiar to you, the answer is probably not.