StarTech ST1000SPEX 1 Port PCI Gigabit Ethernet adapt

Similar Questions

• This device cannot start. (Code 10) Windows 7 64 bit JMicron PCIe Gigabit Ethernet Adapter

  Apparently, I get this error at random times in the day.  My ethernet port just no longer works and I tried disabling and reactivation that used to (a while back) work.

  Then recently I was disabling and re-enabling it, it gets stuck in the 'disabled' and this error message appears when I open "Properties".  I tried to reinstall the drivers for the device with the CD of my laptop came with, but that has not worked so I looked on the site Web of Jmicron and found a newer driver who, after installing again, did not work.  I have a fixed work wireless, but not with no LAN no is a pain in the thigh.

  WIndows 7 64 bit Home Premium edition
  Sager NP 5165 Notebook
  JMicron PCI Express Gigabit Ethernet adapt

  Try to update the laptop bios and chipset software provided by your computer laptop oem (dell, hp, whoever). Fixed an instance I had 10 with a device error.

• Thunderbolt to Gigabit Ethernet adapter not working

  Hello

  I'm new to this community has never had a problem on my mac since I had last year.  MacBook Pro retina mi 2014 running El captain.

  My ethernet is not picking up DHCP and thunderbolt ethernet does not appear in the network interface.

  I use also fell in love with VGA Converter works on the two test port.

  I also reset the PRAM and the MSC still nothing.  Also restored some peripheral preference to another forum I found on the internet.

  I created another account from administrator to test to see if the interface resumes, still nothing.  How ever wifi works without problem

  Thanks in advance if anyone could help with my problem.

  Dump of information systems presents its collection as below.

  Bolt of lightning to Gigabit Ethernet Adapter:

  Name of seller: Apple Inc..

  Device name: Thunderbolt to Gigabit Ethernet Adapter

  Vendor ID: 0 x 1

  Device ID: 0 x 8003

  Revision of the device: 0x1

  UID: 0X0001000203A8FCF0

  Apple serial number: DTN450706APDWKHBZ

  Route of chain: 1

  Firmware Version: 5.5

  Port (upstream):

  Status: Connected device

  Link status: 0x2

  Speed: up to 10 Gb/s x 1

  Port Micro Firmware Version: 0.0.8

  I have this problem as well. My crush to the ethernet adapter was working yesterday, but now I have not been able to run all day. I even tried everything said in this thread: ImtiazThunderbolt Ethernet does not work after upgrade to Yosemite , you should try what is in the thread, as it has worked for some people.

• Maid in Gigabit Ethernet Adapter

  Hello

  I bought a bolt of lightning for gigabit ethernet card.

  Could someone give me a pointer in the implementation to connect to the Internet using this? Can't seem to get it to connect.

  I use a MacBook Pro el capitan

  Thank you very much

  If the Ethernet on your Mac has stopped working recently - Apple supports

  This might help

• Ethernet adapter does not

  I can't get the hang of lightning Gigabit Ethernet Adapter (MD463LL/A) working on my Macbook Pro 15 inch 2014 (11.2).

  When I plug the unit in each port thunderbolt I don't see anything on the screen. However, when I look in the section "Thunderbolt" in system information, I see the following:

  

  When I look in Network preferences, I don't see anything:

  

  And when I try to add a new network interface, ethernet Thunderbolt is not listed:

  

  I searched around for this problem, and some have recommended the removal of all interfaces, killing the networkpreferences plist and restart. I tried this, and it did not help.

  Also, I went back the dongle assuming that I just got a bad copy and bought a new one. The same problem.

  Any ideas would be very appreciated.

  Did you turn off wifi and move the Thunder bolt to the top of the list. Set to zero if necessary

• I run xp coffeehouse get an icon remove the device safely. I check it and it is for a card broadcom netlink gigabit ethernet which can not be deleted

  I run xp family on a computer laptop hp compaq 6510 b.  The broadcom netlink gigabit ethernet adapter is part of my motherboard.  Why do it and can I get rid of him?

  Hello

  1 have had any changes made to the computer before the show?

  Restore the system to the date and time when the computer was working fine.

  http://support.Microsoft.com/kb/306084

  If this message has always been to present its likely that the Ethernet card that is built into the computer is connected to the motherboard using a USB connection (this is common in laptops). If this is the case, there is nothing that can be done to remove the message that the deactivation of the Ethernet card, but this will prevent you from being able to use wired Internet/network connections.

• HP Pavilion dm4-2070us: network adapter Atheros AR8151 PCI - E Gigabit Ethernet Controller Driver Windows 10 Qualcomm

  Network adapter Atheros AR8151 PCI - E Gigabit Ethernet Controller Driver Windows 10 Qualcomm
  Options
  10/11/2015-12:08 AM
  Product name: HP Pavilion dm4-2070us
  Operating system: Microsoft Windows 10 (64-bit)
  Laptop: HP Pavilion dm4-2070us OS: Windows 64-bit 10
  
  Problem with the Qualcomm Atheros AR8151 PCI - E Gigabit Ethernet Controller driver network card driver does not not on Windows 10
  
  I've had this laptop for the past 3 years, running on Windows 7 very well, but a few weeks ago, that I've upgraded to Windows 10 when the Wired internet connection stopped working. Whenever I connect the Ethernet cable in the network settings, it says 'Unidentified network' "no internet access. I tried updating the driver, uninstall and reinstall the driver, call Microsoft to help but nothing seems to work. And there is no update driver for Windows 10 on hp.com is a solution for this problem? Help, please.

  Hi Mrstenter,

  The link (atheros.cz) you provided has the same problem. However, I found solutionon the below mentioned link. He was the pilot I needed and it worked! No both my cable and internet connections don't work.

  SOLUTION: Downloaded the driverscape.com driver, double-click to open, double-click on the appliction of installation file, select the option repair the installation, and then follow the prompts. Restart the computer after installation. Mine worked.

  Thank you very much for your help.

  http://www.driverscape.com/download/Qualcomm-Atheros-ar8151-PCI-e-Gigabit-Ethernet-controller-%28ndis-6.30%29

  

• W520 PCI - E gigabit ethernet card

  Hello

  There is a PCI-E on the side slot on the W520.

  Are there of the PCI-E gigabit ethernet cards available somewhere for this port?

  I looked around but have not found.

  Kind regards

  Eddy.

  http://www.CDW.com/shop/products/Belkin-Gigabit-Ethernet-ExpressCard/1001280.aspx?AcquirgyID=1421650...

• UCS-C210-M2 on the problem of gigabit ethernet ports.

  I have 2 x C210 M2 with 2 mother board gigabit ethernet ports and 4 gigabit ethernet ports on a PCI card ports.

  PCI 4 port cards work fine.

  On the 2 ports on the motherboard, I have a problem with ESXi 4.1:

  My 2 ports is auto-negotiation and on the vsphere client speed and duplex of the ports are always displayed correctly.

  The switch network where the server is connected is a C-3560.

  I use this server for Unified Communications, one I see the problem on downloading large files.

  With a virtual machine connection of the unit, when I want to download a file of locale (language file - 650 MB to 1 GB)

  The download progress is displayed in MB and it progresses very slowly as 1 MB every many seconds.

  Whereas, when I use a map PCI 4 port gigabit port, I can see the progression to go at a speed of tens of MB in the same period.

  The only way to have growth to proceed more quickly with the 2 on the main Board gigabit ports, is to set the speed of the 3560 switch

  10 Mbps and half duplex. In this case, when we look at the client vsphere, the gigabit on the server port negotiates to 10 MB - half Dupl.

  and the progress is constant and much faster that it is at this time to 1000 Gb/s Full Dupl.

  Someone has an idea.

  My CIMC firmware version is 1.4.1 and I run ESXi 4.1.0

  Concerning

  Marc - CCIE 2700

  Hello Mark,

  LRO of ESXi feature works well with the Linux kernel (depending on the version of UC apps, they rest RHEL 4.7 / RHEL 5.5)

  Try to turn off RSO on ESXi and check the transfer rate.

  http://docwiki.Cisco.com/wiki/Disable_LRO

  HTH

  Padma

• My USB to ethernet adapter works only if plugged into my MacBook Pro. I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports! Any suggestions?

  My USB to ethernet adapter works only if plugged into my MacBook Pro.

  I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports!

  Any suggestions?

  Juice what 'expander' did you use?

  What model of MacBook Pro?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• HP DL180 Gen9 server: HP 10 GB 2 port 561T Ethernet adapter

  Hello

  Can you help me if this 561T HP 10 GB 2 Port Ethernet adapter is Compatible with my HP DL180 Gen9 Server?

  Thank you

  Mark

  Hello

  This compatible list does not DL 180, but it is compatible with many other DL Gen8 servers:

  http://h20564.www2.HPE.com/hpsc/doc/public/display?docid=emr_na-c03909467

  It must be. But my suggestion: talk with representatives of HP in your region drirectly, they are ready to help you.

  Kind regards.

• How do I configure the Gigabit Ethernet Thunderbolt adapter to go online?

  Using a MBP newly bought El Capitan running, my Wifi works fine when the adapter Gigabit Ethernet Thunderbolt indicates: 'connected' status on my network preferences but in fact no way to get on the internet! All solutions? Thank you

  First of all:

  Apple USB or crush on Ethernet adapters: First time setup - Apple Support

  Either the cable works for other computers?

• X 8 Dual Gigabit Ethernet Port Aggregation easily explained?

  Can you explain what that means?

  • Dual Gigabit Ethernet Port Aggregation

  In a totally non savy way

  @careyjames LACP is not available in AP mode.

• Realtek RTL8168/8111 Family PCI - E Gigabit Ethernet NIC (NDIS 6.0) uninstall issues

  Hello

  I removed the material for the Realtek RTL8168/8111 Family PCI - E Gigabit Ethernet NIC (NDIS 6.0) and installed the hardware and the software for an Edimax 802.11n Wireless PCI card.

  The new hardware and software operated well during the first week, but then suddenly stopped working for no apparent reason. Then, I uninstalled and reinstalled the software and had full Wi - Fi for another day before it stopped working again.

  I can't connect to the internet without having a functional version of the software, but it does not seem to function.

  I think that the problem might be that the former driver Realtek is interfering with the operation of the network card as when I disable and uninstall the old driver in Edimax software working again for about 3 minutes before disconnecting suddely. I don't get the error messages.

  In addition, when I restart the computer driver realtec reappears!

  It has been suggested to me that I should attempt to remove the drivers from the registry but not sure how to do that for the Realtek driver, could someone please educate me on this or give me a solution to this problem.

  My operating system is Windows Vista, and my computer is a HP intel Quad Core.

  Thank you

  How all this relates to the functionality of Windows Update?

  Try this forum instead: http://social.answers.microsoft.com/Forums/en-US/vistahardware/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Airport Extreme Gigabit Ethernet and Jumbo frames

  Hi all.

  Can anyone support me kindly about Gigabit Ethernet & Jumbo Frames with Airport Express?

  I currently have and use a 5th generation Airport Express and you want to buy the QNAP TS - 453 Pro NAS. In any implementation of storage NAS, Gigabit Ethernet, the frames extended as matching Ethernet card well, are all very important to achieve broadband performance, so my questions are:

  5th generation Airport Express

  
  

  • Are the NETWORK Gigabit NIC Ethernet card?
  • It also works with extended frames (QNAP NAS supports 4074, 9000 and 7418 bytes for MTU)?
  • QNAP can trunk NIC (if more then one) with the following options:
    • IEEE 802.3ad (dynamic link aggregation)
    • Balance-tlb (Adaptive Transmit Load Balancing)
    • Balance-alb (Adaptive Load Balancing)
    • others (mainly for failover)

  Is 5th generation Airport Express enough or should I think about moving to the 6th generation?

  Thank you.

  You mix up the terminology... Express and Extreme are totally different.

  The title is correct... Extreme... your question text replaces by Express... they are only 10/100... and gen only 2 of them.

  Any airport extreme Gen2 - Gen6

  Use the Gigabit ports.

  Do not support jumbo frames

  Do not support pairing.