Starting after about 2 min the screen fades at half intensity.

Similar Questions

• Samsung S3520 does not start after that I changed the screen he wants more F2 or F4

  F2 TO SET UP

  AND

  F4 FOR RECOVERY

  BUT F4 DOES NOTHING

  AND F2

  THIS LAPTOP HAS WINDOWS 7 SUPPORT AND WORKED PERFECTLY UNTIL MY BROKEN SCREEN

  NOW THE SCREEN IS BACK WORKING I CAN'T BOOT MY LAPTOP

  ANYONE HAS ANY IDEAS PLEASE?

  Hello

  Thank you for the update.

  I suggest you run bootrec commands and check.
  Reference:
  Use Bootrec.exe in the WINRE to resolve startup problems
  https://support.Microsoft.com/en-us/KB/927392

  You can create the media to install Windows 7 from this link:
  https://www.Microsoft.com/en-us/software-download/Windows7

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• After I Log In, the screen goes black.

  After that I have enter my password and click on enter, it says welcome with the thing to load next to him. Then that disappears and the screen goes black and all I can see is the pointer. Sometimes the bar on the bottom with start on it, is also displayed. Any suggestions on what to do? It works fine when I run it in safe mode.

  original title: after I Log In, the screen goes black. Help me!!!

  Hi Kooper93,

  You can also try theclean boot to see if this is due to a program/process.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After a few minutes, the screen goes black on Windows Vista

  Title: power original economy

  I wish my screensaver runs while I'm not using my computer, but after a few minutes, the screen becomes black until I move my mouse again. How can I stop this?

  Thanks, it was just a matter of adjustment of the power to the right thing!

• Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

  original title: Auto Adjust

  Hello.

  Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

  I tried restoring the system that works and that gets our screen back to normal but every day that this Auto setting is coming and we can't seem to stop it.

  Any help would be appreciated... Thank you

  Try this:

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• When I close my laptop running 2 files and when I do the closing and after that I open the screen is white... what I need to do?

  When I close my laptop running 2 files and when I do the closing and after that I open the screen is white... what I need to do?

  Hello

  Let us try these methods and check if that helps.

  Method 1.

  You can try the last good known Configuration and check if that helps.

  Using the last good known Configuration: http://windows.microsoft.com/en-in/windows7/using-last-known-good-configuration

  Method 2.

  You can use the restore points for Windows 7 to return to a previous state, when your computer was working properly.

  System Restore: http://windows.microsoft.com/en-us/windows7/products/features/system-restore

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• When you watch a movie on netflix after that 10 minutes, the screen turns white

  original title: when you watch a movie on netflix after 10 minutes, the screen goes white, I can hear the movie but not see it. How to stop going empty?

  When you watch a movie on netflix after that 10 minutes, the screen becomes white, I can hear the movie but not see it. How to stop going empty?

  If I move it, it comes back. I went to personalize and click never. I know you if it's ok now!

• My computer, the screen is only half the size of the screen.

  Original title: full screen

  My computer did an automatic update and when I turned on my computer the screen is only half the size of the screen.  How to bring back my full screen?

  Hello

  Which update you speak?

  Please follow the steps in the link to set the display resolution.

  Check out the link:

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-us/Windows/getting-best-display-monitor#getting-best-display-monitor=Windows-Vista

  For all windows questions do not hesitate to contact us and we will be happy to help you

• I have an old iMac (about 10 years) and after a power cut the screen remains black after start-up

  IMac was on but in the sleep when had power cut. After feeding back immediately tried to start over, but I just black screen that could hear the startup chime, and hear the work of the machine. In collaboration with el captain. I have mouse and wireless keyboard. Any ideas?

  Reset the management system (SCM) controller on your Mac - Apple Support

• Service Pack3 after install that my computor does not start it keeps restarting after it arrives on the screen of the window

  I remove SP3 it works very well to reinstalled sp 3 and had the same problem

  I remove SP3 it works very well to reinstalled sp 3 and had the same problem

  IF the system has an AMD processor, see this:

  Your AMD computer starts after installation of XP SP3?

  Download and run the tool that is located in the "first problem, affecting computers AMD with OEM images, mainly desktop HP"section. "

  MowGreen Services consumer safety update

• Device not start after rooting and reinstalling the original software

  Hello and welcome to you all from Cape Town, South Africa.

  Awhile back, I decided it would be a good idea at the root of my Xperia Z, not a big deal really, even if I had to ask a mate of mine to help when I managed to bootloop device, the beautiful will... not!

  Well good to cut a loooong story... short ish! My Z has been reset to the factory / carrier standard and after about an hour, I decided to play again and try my hand at "flashing" one of the other carriers due to having firmware changed service providers! If by chance, you were wondering how that happened, here, I'm stuck with a device that does not load properly and juuuust on boots, only for a fraction of second program start screen for THE SONY XPERIA Z... then... tickets... gone, dead, all just tired!

  I then rolled along for my poor unsuspecting companion, who just shook his head when I handed him the said device. The poor boy had for a week and has just managed to restore the software, even if he is convinced that it is a hardware problem, as in the battery!

  Please one, if not all of you, kind people put me on my my Sony and give me either a glimpse of hope, or simply give it to me right and tell me what might be wrong with the unit and weather or not, it can be resolved, I will impose a ban on all fiddle devices... capable.

  Best regards

  Travstar

  Fix the phone with XC, if you encounter the same problem, most likely your friend is right

  Xperia Companion (XC)

  Software repair Guide

  Alternatives on how to backup Xperias

  http://talk.sonymobile.com/thread/36355

• a lot of time, I click on Firefox, also a compatibility of add-on runs after a few moments, the screen fills with Firefox Android adds; It's embarrassing. How

  The last update of Mozilla change the way my computer starts when I click on Mozilla on the desktop. The first think what will happen is that a small window appears and tells me it is to check for the compatibility of modules. After what seems like a long time, the screen fills with a sort of Mozilla on Android and Mozilla. I must then x to access my email page. It's embarrassing. How can I fix it?

  Firefox says it's just updated each time that it starts - how to fix

  It looks like this problem.

• Satellite Pro P100-124 starts upward, but nothing on the screen

  Hello world

  I'm a newbie here & laptop but my companion got a satellite Pro P100 (Toshiba Satellite Pro P100-124 PSPA4E-001001EN) & it is my asked for help. Here's the problem:

  Laptop starts to go through the procedure of starting with lights coming and cd player starts to work the rotation of fans, but nothing shows up on the screen

  I said it could be the graphics card but could do with a starting point, I'm PC savvy but on the desktop, it's my first attempt at a portable computer so please be nice...

  Hello

  Have you tried this thing?

  ->, remove the battery and unplug the AC adapter from the portable computer
  -> waiting for ~ 30 min 1 h
  -> connect the two parts again and try to turn on the device

  If this will not help, then it would mean that a hardware problem serious causes this problem and you will need to contact a Toshiba ASP technician to know exactly what s wrogn.

  Good luck

• ThinkPad T400 does not start, is turn on below the screen & turning HDD switch off in a loop

  I put my Thinkpad T400 hibernation, but the next morning I couldn't start. When I press the power button, the lights under the screen turn on and I hear the sound of the hard drive and get it out. I don't even see anything on the screen. It is only black. The process continues to repeat in a loop, except if I press the power button to turn off.

  I tried the static load, remove the thing.

  I also removed the hard drive, put it back again, but not working anymore.

  Help, please.

  Solved the problem myself.

  Removed the internal battery and reinstalled after 30 s.

  It worked perfectly. Typing of him now.

• Unlock windows box disappears after windows automatically locks the screen

  Hello

  I have a professional Windows XP Tablet from Lenovo X 200 ongoing execution machine. This problem does not occur * too * often, but enough to be annoying.

  After 15 minutes of inactiviy, windows is the standard screen saver routine by locking the desktop computer. Meanwhile, the white box that says click on Ctrl-alt-del to enter your password is visible. There is also the virtual keyboard on the screen.

  From time to time, I go back to my computer to see that white box unlock is missing! There is no way for me to go back to windows! I have literally remove the battery and restart. During this time, I lost all my unsaved data... not to mention that I keep not the most graceful way.

  This happened to someone? What in the world could be the cause?

  Thanks for the comments.

  Hi Jim_B_NJ,

  1. you have value to request password on Resume on the computer?

  I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  For more information please visit the link below.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  If you don't want to try windows to ask for the password after the recovery step turn it off below.

  (a) make a right-click on an empty area on the desktop

  (b) select Properties in the context menu that will open

  (c) click the screensaver tab

  (d) uncheck the box that says on Resume, password protect to disable.

  (e) click OK

  If you don't want the window Ctrl + Alt + Del on the logon screen, try the steps below.

  (a) click Start, click run, type Control Userpasswords2, and then press ENTER.
  Note The following dialog box may appear:
  You must be a member of the Administrators group on this computer to open user accounts. You are logged in as username, and this account is not a member of the Administrators group.
  In this condition, you must type the user name and password when you are prompted with the dialog box to type the user name and password of the administrator of the computer.

  (b) click the Advanced tab.

  (c) in the Secure logon section, click to clear the checkbox user must press Ctrl + Alt + Delete if you want to disable the CTRL + ALT + DELETE sequence

  How to enable or disable the CTRL + ALT + DELETE sequence for logging on Windows XP and Windows Vista, Windows 7

  http://support.Microsoft.com/kb/308226

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.