Startup EXE does not run in the controller for cRIO-9002

Similar Questions

• void VI does not run with the main VI.

  My main and sub VI is attatched.

  danil33 wrote:

  Re: void / VI does not run with the main VI.

  When you start your main program, the Subvi is called and the main VI must wait the Subvi before it can continue. However, the Subvi is not set to open the Panel before, so very probably that it runs in the background for 100 seconds (1000 iteration to 100ms), because no one can press the stop button at the beginning to put an end to the Subvi. Once the Subvi is completed, the last value is returned to the main VI via the output connector and the main VI can process and display this last value. At this point, the main VI stops, because it's done (hopefully you do not "continuous operation").

  Obviously you have some misconceptions of beginners on the stream. Please we tell exactly what you expect the program to do, and we might be able to point in the right direction.

• LV TEN F5 SP1 does not appear in the components for deployment...

  Hello

  Just migrated my x 32 to x 64 TS2014 TS2013 LV2013 & apron & LV 2013 x 64. I'm now trying to build a new installer for deployment for my test stations, but LV RTE SP1 F5 does not appear in the components for deployment, even if it is properly used as adapter labview Teststand sequence editor... why?

  I can see RTE SP1 F3, but not F5...

  If please see attached picture to see my setup teststand (showing the labview adapter) and the list of parts available in the deployment utility.

  Thank you very much for the help.

  C.

  Hello

  Thank you for the information.

  As a temporary solution (as of 2014-12-04), I manually installed the SP1 LV F5 RTE 2013 on the test station.

  Here you can find the downloadable version:

  http://www.NI.com/download/LabVIEW-run-time-engine-2013-SP1/4539/en/

  Thank you and have a great day,

  C.

• Program does not run in the emulator.

  Hello, I develop in Netbeans, version 7, I use J2ME and this the first time that I try to compile an application for BlackBerry, I download all the framework I need to develop an application for BlackBerry, I'm trying to run my program and the emulator of the BlackBerry beginning but my program does not run, I have no exception and any error, please if anyone can help me Thanks in advance.

  You can publish detailed information for we can help you as your code runs only not, what your average frame, etc...

• Where can get newspaper of reason behind Manager jaxws soap does not run during the webservice call in weblogic 11 g

  Hi guys,.

  http://docs.Oracle.com/CD/E23943_01/Web.1111/e13734/handlers.htm#WSADV189

  I created SOAP manage by top surround URL and deployment artifacts are generated with build.xml.

  I don't know why managers do not run in the web service call in weblogic 11 g.

  Regarding

  Siddharth Singh

  Solution

  Ant was not generating little class and manager xml file

  I manually copy these files

  Maybe Ant was not generating these files because of this warning

  [jwsc] WARNING: types of annotations without Transformers: [javax.xml.bind.annotation.XmlRootElement, javax.xml.bind.annotation.XmlAccessorType, javax.xml.bind.annotation.XmlType, javax.xml.bind.annota

  n.XmlElement]

  [jwsc] 1 WARNING

  Full journal of ants

  D:\SOAP_JMS>Ant f ant - build - jhand.xml
  BuildFile: Ant - build - jhand.xml
  Trying to replace the old definition of the task clientgen

  Build-service4:
  [jwsc] TJ: processing module/om/sai/buddh/SaiWebService
  [jwsc] The analysis of source files
  [jwsc] The analysis of source files
  [jwsc] 1 TJS files processing for the module/om/sai/buddh/SaiWebService
  [jwsc] TJ: D:\Oracle-ESB-RND\EncrpytionDecriptionWS\src\om\sai\buddh\SaiWebService.java valid.
  [jwsc] Treatment of the web services JAX - WS 1...
  [jwsc] WARNING: types of annotations without Transformers: [javax.xml.bind.annotation.XmlRootElement, javax.xml.bind.annotat
  tion. XmlElement]
  [jwsc] 1 WARNING
  [jwsc] Compilation of 5 source files for C:\Users\si244339\AppData\Local\Temp\_y1j0ng
  [jwsc] Building jar: D:\SOAP_JMS\outputnew\AAJAXHandlerSai1EarResponseQ\om\sai\buddh\SaiWebService.war
  [jwsc] Created JWS deployment outputFile: D:\SOAP_JMS\outputnew\AAJAXHandlerSai1EarResponseQ\om\sai\buddh\SaiWebServic
  [jwsc] [EarFile] Application file: D:\SOAP_JMS\outputnew\AAJAXHandlerSai1EarResponseQ\META-INF\application.xml
  [AntUtil.deleteDir] remove directory C:\Users\si244339\AppData\Local\Temp\_y1j0ng

  BUILD SUCCESSFULLY

• Bought LR6 DVD but the installer does not connect to the internet for I can register it.  I downloaded the trial version to work around this problem, but I can't get the program to start.  I get the same message that I should connect to the internet and c

  Purchase DVD LR6 Adorama, but Setup does not connect to the internet so that I can record.  Internet works fine.   I have Adobe account.

  I went to Safari to Chrome and downloaded the trial version in the hope to bypass the DVD version, but I can't get the program to start.    I get the same message that I should connect to the internet and connect.  It seems impossible after 3 hours.  Spent an hour chatting with the support of the India.

  Also remove the cookie file and reg Lightroom then enter the serial number and check.

  Windows:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  programdata %

  It will open the ProgramData folder. inside locate Adobe folder.

  Go to Adobe > Lightroom.

  Open Lightroom and delete all the files inside,

  Then run LR 6 and enter the serial number,

  Mac:

  (1) right-click on the icon in the Finder, then select the 'Go - To Folder' option.
  (2) you will get a text box, type in the following command and then press the 'return '. (" Do not miss ~ symbol" "')

  ~/Library

  It will open the folder of the user's library.

  (3) then navigate to Application Support > Adobe > Lightroom.

  Open Lightroom and delete all the files inside,

  Then run LR 6 and enter the serial number,

• Helpctr.exe does not load in the Start Menu. System Restore does not work.

  Help and Support not be loading not on the Start Menu. I get a msg of error helpctr.exe is not found. I run for the file with no result. Also the system restore does not work even in safe mode. I use XP Home SP3. Any suggestions? Thank you.

  No problemo!

• The startup process does not end and the system keeps restarting

  From the time my system has been upgraded to El Capitan, I have a problem with the startup of the system. The login screen has horizontal lines. The system does not start properly and begins to restart before completing the startup process. After 10 or 15 attempts, the system starts. Only when the login screen appears without those lines, I know that the system should start. Once it starts, all of a sudden the screen freezes and system crashes too.  This happens usually when I try to open a large file, Powerpoint or Adobe Acrobat. Or the screen moves to the right and the screen freezes and I have no choice other than to restart the system.

  Service center staff has stated that there is a problem of display driver and updated. But it's always the same problem. What could be the problem and how to solve?

  Thank you

  Olivier

  Download and view a report of Etrecheck;

  http://www.etresoft.com/etrecheck

  Ciao.

• Wireless controller does not work, said the controller is not an installed device

  My "network controller" does not work it says... And he did my wireless doesn't work don't as well.
  It happened when I installed Windows 7 Ultimate on my Acer Aspire 5542 G. It just says: the network controller is not an installed device or something. I'm not smart with this kind of thing. So can somebody seriously help out me?
  I tried to go to the main web site... But nothing will do it. 0: Yes... And I even tried updating the driver but he just said that he does on windows update...

  Theres 4 here wireless LAN drivers . Select Notepad / sucks / 5442G.

  But you will need to know if its Atheros QMI or Foxconn.

  If this is the wireless on board. If its got one? in Device Manager, double click on it go to the Details tab / change hardware ID's for one of the entries, copy and paste it here.

  Or if you want I could have a glance with teamviewer.

  You'll see what I'm doing. If you get it give me the ID and password, it gives you

  Or if you have Skype, my Skype name is the same name I use here

• Application created using the BB for Eclipse plugin does not run in the Simulator

  Hi all!

  I created an application using BB plugin for Eclipse.  I try to run in the Simulator, but it never gets displayed (the application icon is never shown).  However, I create a "Hello World" sample, which works perfectly in the Simulator.  My application in Eclipse has never shows all files .cod or .jad, there only have files .jdp and .rapc

  My doesn´t app have encoding problems or errors of any kind (at least not displayed in the view of error).

  TIP: I have copy - paste code in different applications, is that a problem?

  I tried:

  • Restart Eclipse,
  • Configuration of active building of blackberry,
  • Cleaning of the project,
  • Creation of the project,
  • Reinstall Eclipse,

  but none of this seems to work.

  Can someone help me please?

  Best regards

  Juan.

  Hi all!

  In the event that a person gets the same problem, I mentioned.  I found the solution: it turns out that I had a very high class with a lot of code on it and that s the reason why the application does not get launched into the Simulator.  What I did that I shared this class on the 4different classes each managing different parts of the code and now it works perfectly.

  Hope someone is enjoying this, cause I spent a lot of time trying to figure out what the problem was.

  Best regards

  Juan.

• VBScript does not run in the Windows 7 Task Scheduler 'execute if user connected or not' is checked.

  I'm trying to run a vbs file using a batch file windows scheduled in the Task Scheduler in windows 7.  The vbs runs under the Scheduler if the option "run only when the user connects" is checked.

  When I go to 'Execute if user or not' task does not, either manually (by command file) or through the schedule.

  The vbs is a project of SAS Enterprise Guide.  These scripts, vbscripts worked in Windows XP.

  This is the vbscript code (I don't know anything about vbs, this is generated from SAS for EXAMPLE):

  Option Explicit
  Dim app

  Call to dowork

  "Stop the app
  Otherwise (app IsNot Nothing) then
  App. Quit smoking
  Set app = Nothing
  End If

  Sub dowork()
  On Error Resume Next
  '----
  "Start Enterprise Guide by using the name of the project
  '----
  Dim prjName
  Dim prjObject

  prjName = "------network patht\SQL_tst.egp" ' name of the project
       
  Set app = CreateObject ("SASEGObjectModel.Application.4.3")
  If Checkerror ("CreateObject") = True Then
  Exit Sub
  End If
     
  '-----
  "Open project".
  '-----
  Set prjObject = app. Open(prjName,"")
  If Checkerror ("app. Open") = True Then
  Exit Sub
  End If
     
         
  '-----
  ' run the project
  '-----
  prjObject.run
  If Checkerror ("Project.run") = True Then
  Exit Sub
  End If
     
             
  '-----
  ' Save the new project
  '-----
  prjObject.Save
  If Checkerror ("Project.Save") = True Then
  Exit Sub
  End If
     
  '-----
  "Close the project
  '-----
  prjObject.Close
  If Checkerror ("Project.Close") = True Then
  Exit Sub
  End If
        
  End Sub

  Function (fnName) Checkerror
  CheckError = False
     
  Dim strmsg
  Dim errNum
     
  If Err.Number <> 0 Then
  strMsg = "error #" & Hex (Err.Number) & + "\n" & "as" & fnName & + "\n" & Err.Description
  'MsgBox strmsg' Uncomment this line if you want to be notified via MessageBox to errors in the script.
  CheckError = True
  End If
          
  End Function

  Hello Carolyn111,

  I suggest that you post in TechNet in the official Scripting Guys Forum.
  Click on the link here to post your question. They would be better able to answer your question.

  Thank you

  Marilyn

• TabTip.exe does not start in the default desktop

  Separated from this thread.

  Same here, please please share your knowledge. Thank you!

  I can start cmd.exe in another desktop computer and run other programs there. However, tabtip.exe is still running in my old office...

  Peter

  I suggest that you contact the developer because we don't have any special knowledge of the software.

• PowerCLI script does not run from the SRM command line

  Hello

  Even if I put the Unrestricted PowerShell execution policy, when I try to run a script from a command line step added in SRM, the script is run. The newspaper of SRM, I find:

  [#2] dynamicType = < unset >

  [#2] faultCause = (vmodl. NULL in MethodFault),

  [#2] result = {(dr.secondary.CalloutResult)

  [#2] dynamicType = < unset >

  [#2] commandLine = "c:\windows\system32\cmd.exe /c C:\Source_code_VMware\Scripts\redirect.bat C:\CACINTEL\Source_code_VMware\Scripts\DRSrules_TEST.ps1."

  out of [#2] = 'file C:\Source_code_VMware\Scripts\DRSrules_TEST.ps1 cannot be loaded.

  [#2] because the execution of scripts is disabled on this system. Please see "get - he.

  "[#2] lp about_signing" for more details.

  [#2] On line: 1 char: 2

  [#2] + & < < < < "C:\\Source_code_VMware\\Scripts\\DRSrules_TEST.ps1".

  [#2] + CategoryInfo: NotSpecified: (:)) [], PSSecurityException)

  [#2] + FullyQualifiedErrorId: RuntimeException

  [#2]

  [#2] ",

  [#2] returnValue = 1,

  [#2]    },

  [#2] msg = ","

  Once more, the execution policy is set to unrestricted:

  [vSphere PowerCLI] C:\Program Files (x 86) \VMware\Infrastructure\vSphere PowerCLI > Get-ExecutionPolicy-list

  Scope ExecutionPolicy
  -----                                               ---------------
  MachinePolicy Undefined
  UserPolicy Undefined
  Undefined process
  Undefined CurrentUser
  Unrestricted LocalMachine

  Of course, the command works fine if I run it manually from a command prompt.

  Any idea?

  Thank you in advance

  Make sure that add you in the 32-bit version of PowerShell, MRS. uses PowerShell to 32-bit host.

  It is the one that always gets me!

• Slide show does not run on the new Macbook

  I can't Lightroom slide show to run on the new Macbook 12 "without"moving the slider"all the time. As long as the cursor moves, it works fine.  But stop moving the cursor and slide show hangs.  Is this a known bug?  CC of Lightroom running on a Macbook 12 ".

  Hi PaulWatmore

  Please make sure you have QuickTime on your computer up-to-date

  Also uncheck "processor use graph' under Lightroom > preferences > Performance

  Concerning

  Assani

• PC does not restart after the restart for the recent updates of windows

  The other day after a windows update and restart my laptop is no longer starts.  It's a HP Pavillion Entertainment moidel with an I7 processor with windows 7 Home premium.  Initiually I see the HP logo, and then the welcome 'Please wait' screen - just like a normal restart onb - words but and the screen remains completely black and a rectangle appears which says "establishment of the custom settings for windows desktop update"-, then nothing happens for hours - nothing.

  no icons-no possibility to any what - all was going well until the reboot for updates of windows.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are facing some problems using Windows.

  Try the methods.

  Method 1:

  I suggest to disconnect all external devices except the keyboard, mouse and screen and check if the problem persists.

  Method 2:

  I suggest you do the startup repair using Windows 7 boot DVD/USB (Universal Serial Bus):

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Note: You can also create a system repair disc that contains the System Recovery Options menu. For more information, see create a system repair disc.

  Method 3:

  See the article and follow the steps if you are unable to perform a Startup Repair:

  Windows 7 no longer starts, and the Startup Repair tool does not resolve the problem

  http://support.Microsoft.com/kb/934540

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.