Startup is too long to complete__

Similar Questions

• Who feels that the Droid Razr startup is too long?

  I just wanted to know if anyone feels that the priming time takes long path at startup after powering off the unit.

  Gives me time to pick my nose.

• My computer became very slow (startup takes a huge time and even my internet browser takes too long to load.

  Original title: slow down the computer

  Hello world

  I am running a Win7 on an hp w1858 pavilion. My computer became very slow (startup takes a huge time and even my internet browser takes too long to load. I use Google Chrome btw)

  I also have Norton Security Suite via Comcast which shows that my system is clean, so I don't really know what the problem is. I would be grateful :) all tips thank you

  Yes svchost.exe is eating all your cpu about

  Cause the most common was that the windows update system stuck

  Please go to start and Panel and Windows updates

  On the top left click on change settings update.

  Switch to never look for updates,

  

  

  After the above, restart your machine.

  After reboot see if these updates are installed if not install it.

  KB3161664 main download page

  https://TechNet.Microsoft.com/library/security/MS16-073

  Win 7 32 bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52823

  Win 7 64 bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52794

  Same deal with it if it is not already installed

  Main download page,

  https://support.Microsoft.com/en-us/KB/3161608

  Win-7 32-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52976

  Win-7 64-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52974

  Once the two of them are installed,

  Change your settings to update them and manually check the updates, if this is not after the passage of the parameters and save the changes.

  

• Satellite A300-23d needs too long to start

  Hi all

  I have a Satellite A300-23d.
  The problem is that it takes too much time on the login screen 'Please wait '.

  I did try the recovery since the DVD and start the system, but still have the same problem, and diagnose the startup has not detected any problem.

  Can someone please?

  Hello

  I think I could help you
  I had the same problem with my laptop. The start-up procedure is too long (about 3 min).
  I have updated the Tempro software and disabled some background processes in the MSCONFIG Startup tab.

  This has helped to decrease the boot time of one min.
  I think it's very good improvement.

  Welcome them

• HP ENVY 15-j110, takes too long to start

  Hey guys I have HP ENVY 15-j110 I bought recently, but now, after a month it takes too long to open and sometimes only a black screen.

  He

  Product number is this #ACJ F6C58PA

  answer as soon as possible.

  This could be due to the application running in the back ground and starting applications. Try

  Selective startup:

  http://Windows.Microsoft.com/en-us/Windows/Run-Selective-startup-system-configuration#1TC=Windows-7

• Why does take so long to load from the time wherever I power up until it takes to get to the login screen? help taking too long

  Why does take so long to load from the time wherever I power up until it takes to get to the login screen? help taking too long

  You should take a look at your startup programs and decide what is really necessary and what is nothing more than useless clutter. There is nothing wrong with the startup programs, some may be really useful or even necessary for your personal needs. But keep in mind that many programs build to start when you start the computer and that most of them must not start when the computer starts, all they do is slow down your boot time and clutter of things when you're trying to solve problems, and some are downright harmful!

  I mean, have you really need things like real Planner and Gadwin Print Screen running all the time? These programs will run very well, even if they are not started automatically every time that you start the computer. Go to these programs and change/disable their boot option. Some may be difficult to kill for public assistance services can be useful when you try to control startup programs. Try CodeStuff Starter, it's safe and easy to use, I think you'll like it, download it here:

  http://CodeStuff.tripod.com/products_starter.html>

  Use AutoRuns to check axis start, Richard:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx>

  Use Cclenar-> tools-> start

  http://www.CCleaner.com/download/builds.aspx>

  I can't tell you what to keep, startup items it is a personal preference, but pretty well all the startup items indicated by CodeStuff Starter are safe to disable, and changes are easy to reverse if you change your mind. Searches for items it shows you and decide whether or not these things are really useful or necessary. Some programs will be started at startup without your knowledge and over time, that list can expand to include useless parasites, part of good computer maintenance includes regular control of these startup items and the removal of the unnecessary.

  Suggest that you first spread malware as the cause of the problem by following these steps:

  I. - delete your temporary files

  Clean the system (compensation to all temp/tmp folders and included all the content offline, the tif browser, delete the cookies of compensation.)

  Do a disk cleanup. Click the Start button. in the search box, type disk cleanupand then in the list of results, click Disk Cleanup. Better and easier to use - ccleaner.

  Download the basic version (slim) via

  http://www.Piriform.com/CCleaner/builds>

  The basic version (slim) does not contain the toolbar disgusted

  DO NOT USE ANY cleaning of the advanced options. DO NOT TOUCH THE REGISTRY OR TOOLS. At least not for now.

  Reset

  II. - have your system scanned as a result of security/antivirus installed.

  III. - download, install, update and run both of these tools to a-squared free scans:

  MalwareBytes anti-malware (MBAM)

  http://www.Malwarebytes.org/products/malwarebytes_free>

  SUPERAntiSpyware (SAS)

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html>

  UTC/GMT is 18:16 on Wednesday, January 18, 2012

• Windows update takes too long to find the updates

  I had just installed a new hard drive on my laptop Dell inspiron N5050. I did a reinstall of system clean of my operating system to windows 7. After that, I started to run windows update to get all the necessary updates that I need to update completely from the computer. He has worked for a very long time with no result. In addition, at least 2 hours. all the settings for windows update is set to the settings recommended. but for some reason, in my view, takes too long to get updates. can someone help me please this possible issue

  Hello Darrin,

  Thanks for posting your query on the Microsoft Community.

  According to the description, the Windows updates take a long time to find the updates.

  I suggest to follow the methods below and check if that helps.

  Method 1: If your computer is experiencing problems find and install updates of the operating system, try using the troubleshooter.to of update of Windows the problem fix. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.

  Reference:

  Open the Windows Update troubleshooting tool

  If the problem persists, try Method 2,

  Method 2: run the clean boot: Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. Check this question in the clean boot state.

  Reference: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  See also:

  Problems with installing updates

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Pointer is over an icon too long. It is not easy even get the internet sometimes

  I find it too difficult to navigate. Need me to places just because my pointer is over an icon too long. It is not easy even get the internet sometimes. I'm the only person who dislikes this 'new' windows?

  Hello

  These should help:

  Ways to improve the performance of your PC
  http://Windows.Microsoft.com/en-us/Windows-8/improve-PC-performance

  Maintenance & performance
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V2H=win7tab1&V3H=winvistatab1

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  =======================================================

  You use a 3rd party antivirus/antispyware/security program? If so many people
  can cause slow start from the bottom.

  Check with the support of the system Maker (manufacturer of motherboard for customized systems), their
  online resources and the drivers and ask questions in the forums about known problems.
  Updating the BIOS , drivers of low level chipset and embedded and separate major
  device drivers (anyone who can have an impact on the speed of startup and performance).

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the office and
  Splash screen.

  Check startup programs.

  Right-click in the left lower corner - Manager of tasks
  Or Windows key + X - Manager of tasks
  Or right click on the taskbar - task manager

  Check the Startup tab.

  More troubleshooting:

  How to perform a clean boot for a problem in Windows Vista, Windows 7,
  or Windows 8
  http://support.Microsoft.com/kb/929135

  Other programs to help:

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  =======================================================

  If necessary:

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore. Be prepared to re - install the programs, applications will remain.
  And having redundant backups of your files on the disk main hard is always a
  good idea.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a repair disc:

  Create a system repair disc
  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  How to create a "system repair disc" (CD/DVD) in Windows 8
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Hyperion EPM services take too long to start

  Hyperion 11.1.2.3

  Windows 2008 R2

  32 GB of memory on each server

  Java 1.6.35

  Server environment four (Foundation/FDMEE, planning, Essbase and SQL server).

  Some how it takes too long to start the services of Hyperion. Using the batch script to start all services. Can someone advise where to start looking. Here's the log of HyS9Planning_SERVER-sysout. If this can give an idea

  < 12 February 2014 12:40:34 hours EST > < Info > < security > < BEA-090905 > < disabling CryptoJ JCE provider auto-intégrité for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true >

  < 12 February 2014 12:40:35 hours EST > < Info > < security > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true >

  < 12 February 2014 12:40:35 hours EST > < opinion > < WebLogicServer > < BEA-000395 > < according to the contents of the extensions added at the end of the classpath directory:

  D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\audit-client.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\css.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\ctg_custom.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\ldapbp.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\opencsv-1.8.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\registry-api.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\wlpool.jar>

  < 12 February 2014 12:40:35 hours EST > < Info > < WebLogicServer > < BEA-000377 > < start WebLogic Server with Oracle JRockit (R) Version R28.2.5-50-153520-1.6.0_37-20121220-0844-windows-x86_64 of Oracle Corporation >

  < 12 February 2014 12:41:19 hours EST > < Info > < management > < BEA-141107 > < Version: WebLogic Server 10.3.6.0 Mar 15 08:52:36 PST Nov 2011 1441050 >

  < 12 February 2014 12:41:43 hours EST > < emergency > < management > < BEA-141151 > < Management Server could not be reached at http://hydevf01.uts.mcmaster.ca:7001. >

  < 12 February 2014 12:41:43 hours EST > < Info > < Configuration Management > < BEA-150018 > < this server will be started in mode of managed server independence in the absence of the admin server. >

  < 12 February 2014 12:41:43 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >

  < 12 February 2014 12:41:43 hours EST > < Info > < WorkManager > < BEA-002900 > < self-adjusting Initializing of thread pool >

  < 12 February 2014 12:41:44 hours EST > < opinion > < LoggingService > < BEA-320400 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >

  < 12 February 2014 12:41:44 hours EST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log00014. Log messages will continue to be logged in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log. >

  < 12 February 2014 12:41:44 hours EST > < opinion > < Log Management > < BEA-170019 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log server log file is opened. All events in the log server-side will be written to this file. >

  OracleFileSSOWalletImpl.getWalletData: enter...

  OracleFileSSOWalletImpl.getWalletData: System.getProperty (user.name) = sp_hydevadm

  OracleFileSSOWalletImpl.getWalletData: dummy sso (shared) file locking...

  OracleFileSSOWalletImpl.getWalletData: locking (shared) file sso...

  Oracle Wallet: Pocket size 12573

  OracleWallet: getSecretStore

  OracleSecretStore: load flow wallet

  OracleSSOKeyStoreImpl: engineLoad

  OracleKeyStoreSpi: Load flow wallet

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: Safe opening 0

  Treatment TP 0

  Storage TP 0 as CN = Entrust .net Secure Server Certification Authority

  TP-1 treatment

  Storage TP 1 as CN = Entrust .net Secure Server Certification Authority 1

  Treatment of TP 2

  TP 2 storing as authority of Certification CN = Entrust .net (2048)

  Treatment TP 3

  Storage of TP 3 in CN = GTE CyberTrust Global Root

  TP 4 of treatment

  TP 4 storing as OU = Secure Server Certification Authority

  Treatment TP 5

  TP 5 storing as UO = class public primary Certification Authority 1

  Treatment TP 6

  TP 6 by storing like UO = class public primary Certification Authority 2

  TP treatment 7

  TP 7 by storing like UO = class public primary Certification Authority 3

  OracleKeyStoreSpi: Storage Secret0

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret1

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret2

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret3

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage of Secret4

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret5

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret6

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret7

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Keystore loaded

  OracleWallet: getSecretStore

  OracleFileSSOWalletImpl.getWalletData: enter...

  OracleFileSSOWalletImpl.getWalletData: System.getProperty (user.name) = sp_hydevadm

  OracleFileSSOWalletImpl.getWalletData: dummy sso (shared) file locking...

  OracleFileSSOWalletImpl.getWalletData: locking (shared) file sso...

  Oracle Wallet: Pocket size 3941

  OracleWallet: getSecretStore

  OracleSecretStore: load flow wallet

  OracleSSOKeyStoreImpl: engineLoad

  OracleKeyStoreSpi: Load flow wallet

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: Safe opening 0

  Treatment TP 0

  Storing TP 0 as UO = class public primary Certification Authority 1

  TP-1 treatment

  Storage of TP 1 in CN = GTE CyberTrust Global Root

  Treatment of TP 2

  TP 2 by storing like UO = class public primary Certification Authority 2

  Treatment TP 3

  TP 3 by storing like UO = class public primary Certification Authority 3

  OracleKeyStoreSpi: Storage Secret0

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret1

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret2

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret3

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Keystore loaded

  OracleWallet: getSecretStore

  < 12 February 2014 12:42:11 hours EST > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >

  < 12 February 2014 12:42:55 hours EST > < WARNING > < JTA > < BEA-110503 > < migration tool (the AdminServer for JTA manual migration policy, or the captain Singleton for automatic migration JTA strategy) is not available. Jump JTA TRS restoration because isStrictOwnershipCheck is [false]. This may cause corruption of potential TLOG if TRS of Planning0 has been migrated to the backup server and the backup server accesses the TLOG of Planning0. More security can be achieved by setting isStrictOwnershipCheck [true]. >

  < 12 February 2014 12:42:56 hours EST > < opinion > < LoggingService > < BEA-320400 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >

  < 12 February 2014 12:42:56 hours EST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log00030. Log messages will continue to be logged in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log. >

  < 12 February 2014 12:43:01 hours EST > < WARNING > < oracle.dms.jrockit.jfr > < DMS-58041 > < The JRockit FlightRecorder class declares that it is not active and so the DMS cannot use it. >

  < 12 February 2014 12:44:01 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server changed to STANDBY status >

  < 12 February 2014 12:44:01 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >

  Using the OraclePKI provider

  taken javax.net.ssl.TrustManagerFactory supported

  taken javax.net.ssl.KeyManagerFactory supported

  Using the OracleJSSE103 provider

  < 12 February 2014 12:47:37 hours EST > < WARNING > < security > < BEA-090668 > < ignored the role 'Admin' resource deployment ' type = < url >, application is DMS Application #11.1.1.1.0, contextPath = / dms, uri = / ">".

  < 12 February 2014 12:51:03 hours EST > < WARNING > < oracle.adfinternal.view.faces.partition.FeatureUtils > < ADF_FACES-30130 > < without taking into account the dependence of the feature on the function "AdfDvtCommon".  There is no such feature. >

  ATTENTION: From post-deployment of ADF library jar on WebLogic Server. "Provider-lazy-inited" init-param missing LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not used.

  On the road: ADF library non-ADFJspResourceProvider after deployment

  Finishing: ADF library non-ADFJspResourceProvider after deployment (millis): 16

  null

  < 12 February 2014 12:51:17 hours EST > < opinion > < Cluster > < BEA-000197 > < listening for cluster communications using unicast cluster messaging >

  < 12 February 2014 12:51:17 hours EST > < opinion > < Cluster > < BEA-000133 > < waiting to synchronize with other members in the planning stages. >

  < 12 February 2014 12:51:22 hours EST > < WARNING > < Log Management > < BEA-170011 > < The LogBroadcaster on this server has no messages to the server admin log. The server administrator can not run. Emissions of message to the administrator of the server will be disabled. >

  < 12 February 2014 12:51:48 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >

  < 12 February 2014 12:51:48 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Cluster > < BEA-000162 > < "async" replication service to start with remote cluster address "null" >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 172.26.55.119:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [2]" is now listening on fe80:0:0:0:0:100:7f:fffe:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < channel 'by default [5]' now listen on 0:0:0:0:0:0:0:1:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [4]" now listen on 127.0.0.1:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "[1] by default ' is now listening on fe80:0:0:0:385e:468:a776:2aac:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [3]" is now listening on fe80:0:0:0:0:5efe:ac1a:3777:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < WARNING > < Server > < BEA-002611 > < Hostname "HYDEVP01.uts.mcmaster.ca", corresponds to multiple IP addresses: 172.26.55.119, fe80:0:0:0:385e:468:a776:2aac % 14 >

  < 12 February 2014 12:52:24 hours EST > < opinion > < WebLogicServer > < BEA-000358 > < started WebLogic independent server managed by "Planning0" for the domain "EPMSystemHYDEV" running in Production Mode >

  < 12 February 2014 12:52:24 hours EST > < WARNING > < JMX > < BEA-149510 > < could not establish connectivity JMX with the Administration Server AdminServer to < JMXServiceURL:null >. >

  < 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,430 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,427 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,429 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:40 hours P.M. > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,428 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,441 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,442 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,443 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,439 for the configured timeout of 5 seconds >

  Do you still have this problem after restarting the server?

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• That the face is lit mode bedside table may be shortened? He remains too bright for too long

  That the face is lit mode bedside table may be shortened? He remains too bright for too long.

  Hello

  No, it is not currently possible to customize the duration for which the screen remains lit mode bedside table.

  If you want to send feedback or feature requests to Apple, you can do so here:

  https://www.Apple.com/feedback/watch.html

• stop taking too long after upgrade sierra - about 20 minutes

  After upgrading to Mac OS sierra, does take about 20-25 minutes for the stop.

  After command to shutdown or restart, screen off, lights remain on for keyboard and apple logo.

  MacBook Pro (retina, 13 inch, mid-2014)

  I found the culprit. MySQL server taking too long to stop. But do not know how to fix it.

• text quoted in the answer page has too long lines

  When I reply to a message, the original message is quoted
  (lines begin with a ' > '), which is very good. The problem is that the lines
  are too long, they do not correspond to the screen.
  I do not understand why: when I type a text, thunderbird
  Properly cut lines - he never goes off the screen.
  And also when I display a text message never goes off the screen.
  In short: I can answer to a message and when I compose my text the original text
  in the quote turns off the screen but then later when I view the email
  (assuming that the email for example was Bcc - ed for me) the text quoted that, before you go

  off the screen can now be seen correctly.
  

  Thanks for your help.

  It does not help if you use Edit > wrap (or use Ctrl + R) when in the compose window?

  If this is useful and could you find disturbing because it happens too often, perhaps the additional format buttons or an another add-on could contribute.

• Try to restore a lost Thunderbird profile, but can't "move profile" because the file names are too long

  I'm having a problem with Thunderbird that is addressed in several comments here and on "mozillaZine", but trying to follow the instructions for fixing it, I ran into a new problem that I see not addressed. The initial problem is that described in this thread, where my files and everything just disappeared, and I am invited to start to create a new profile:

  https://support.Mozilla.org/en-us/questions/1040003

  Following the links in this thread, I get to this - and since my address book has also apparently gone, I click the internal link to the section titled 'Lost profile':

  http://KB.mozillazine.org/Recovering_a_profile_that_suddenly_disappeared

  Step 1 then sent me here:

  http://KB.mozillazine.org/Moving_your_profile_folder_-_Thunderbird

  Step 2 on this page says: "Copy the profile folder where you want to store." When I try to do it, however (using Windows Explorer on Windows 7), he gets to halfway through the copy and then hang up because it clashes with a file name that is too long to copy. And according to the prompt that tells me this, there are many more yet to come long file names.

  Ignore this error and I just ignore these files? That means the copy of profile won't be complete, which I think would be dangerous or would just cause other errors. Or is there some simpler way quite do what I originally planned to do, which is to recover the profile which has mysteriously disappeared?

  Again, I'm under Thunderbird on Windows 7 and it was used for years without ever encountering this extremely irritating glitch. I'll be grateful for any help.

  Here are three different approaches, I suggest:

  1 see https://support.mozilla.org/en-US/kb/using-multiple-profiles and see if you can switch to that you want to use the Profile Manager.

  2. While TB is NOT running, use a prompt with the following commands: Note: place the entire path in quotation marks.

  • CD "the full path of your current profile directory name '.
  • xcopy "the full path of your"good"profile name" / s/h
  • now check with the Windows Explorer, and switch to him as above

  3 change "profiles.ini" (using a text editor such as Notepad) to point to the profile 'good '. "profiles.ini" looks like this:

  [General]
  StartWithLastProfile = 1

  [Profile0]
  Name = default
  IsRelative = 1 * change this to 0 *.
  Path = yt20rg5n.default * change this to the path and the name of your profile of "good."
  Default = 1

  Let me know how it turns out.

• Path and file name of the message is too long to be copied-how fix?

  On Windows 7, TB ver 24.6.0, I use a program called SecondCopy to copy my email when my C drive on my desktop to our file server.

  I get several messages each day like this one for the copy be saved on our network data sharing:

  04/07/2014 21:07:16 - failed to create \\Oz\Data\System\Users\billr\AppData\Roaming\Thunderbird\Profiles\5kxps6et.default\ImapMail\imap.googlemail - 4. com\INBOX.mozmsgs\urn.correios.msg.201211050157328fade3baa08b405e9a940681276b34d9%401352080653478.rte-svc-onebox-na-1d-i-8da6c8f1.us- east - 1.amazon.com.wdseml cannot create the file «» The file name or extension is too long

  I did some shorten folder names, but my names pale in comparison with the LOOOOONG TB gives them names.

  How can I fix?

  I did some shorten folder names, but my names pale in comparison with the LOOOOONG TB gives them names.

  This is because the wdseml files are just files created in order to allow windows to search to index your mail. I will not allow it and safe lots of disk space completely wasted on a feature that I don't use. Thunderbird has a search engine perfect condition. At least as good as windows search.
  Your mail is stored in highest MBOX files in the profile as well as a file of the same name with an extension of MSF that indexes the contents of the folder. One file and one index per mail folder. In the above example, it will be \\Oz\Data\System\Users\billr\AppData\Roaming\Thunderbird\Profiles\5kxps6et.default\ImapMail\imap.googlemail - 4. com

  So I suggest backing up your profile under these space takers and seriously consider just disable windows search. Menu (Alt + T) tools > options > advanced > General in respect of the integration of systems.

  In addition we have all to live in the 256-character limit on the length of the path imposed by windows.

• File name too long in Microsoft Excel 2008?

  I have Microsoft Office 2008 for Mac and I'm a big user of Excel.  Often, I receive an error message indicating that the file path that I specify when you create a new file is too long.  I am convinced that earlier versions of Mac OS x did not produce this error, or at least worked better.  I'm 10.11.4, OSX but I suffered with this problem for some time.  I read other reviews, stating that there may be a limit of 259 characters for the file name and path.

  My question: can someone tell me if this path length limitation has been removed or the less liberalised in the latest version of Excel?  Should an upgrade just to get rid of this nasty problem.

  Thank you...

  You can also post the question in the Microsoft Office for Mac 2016 forum: http://answers.microsoft.com/en-us/mac/forum/macoffice2016?auth=1