Startup Repair infinite loop Windows 7

Similar Questions

• Windows updates lead to Startup Repair whenever I restart

  Hello.

  This issue was irritates me for some time.

  It started when my Skype would not display the log in page, Skype was working fine before. My Internet Explorer 9 does not display pages. Therefore, I tried to get IE11 of Windows Updates. At this time, Windows Update does not work and I found out, I was missing the TustedInstaller.exe, so I had to copy a computer from my friend of the same type.

  Windows Update started to worked fine and checked for 147 updates for me to install (when I came to my computer, Windows Update has been disabled on the not to check the updates).

  I installed them, and when it asks me to restart, I go and do it. However, the percentage of "Configuration of Windows Update" was stuck at 15% (now it is stuck at 30%). Then restart my computer it asks me to start repairs. I do repairs and I think it worked. However, none of the updates to install. I try to update again, but start repairs continue to come back. I can restart my computer without doing the updates. But when I restart to make updates, start repairs.

  I have a Windows 7, 64-bit, SP1.

  Hello Arjun,

  Thanks for posting your query on the Microsoft community.

  According to the description of the problem your computer stuck at startup repair after installing Windows updates. The question might be if there is a file system corruption. So I would say that you want to run auto repair before you reinstall the operating system. To perform the task, I suggest you to try the steps below and see if it helps.

  To run the Startup Repair tool, see the links below for more details:

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  If the problem persists, try to run auto repair from the Windows recovery environment (Windows RE) using the installation media and see if it helps.

  When you use the recovery (Windows RE) environment to resolve startup problems, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.

  Since you are unable to launch desktop and stuck on auto repair loop, you may need to create a bootable Windows installation media, and then perform an automatic repair. If you are using Windows 7 then the link provided below might help you to download and create installation media.

  Download Windows 7 Disk Images (ISO files)

  If the problem persists, try to rebuild the BCD by using the Bootrec.exe tool.

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.
  2. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  3. Click repair your computer.
  4. Click the operating system you want to repair, and then click Next.
  5. In the System Recovery Options dialog box, click command prompt.
  6. Type Bootrec.exe, and then press ENTER.

  See the following link for more information:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  I hope this helps. If the problem still persists, post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Computer turns on but does not boot to Windows, startup repair does not work

  When I turn on my laptop, it brings me to a screen titled "Windows Error Recovery" which means the following:

  "Windows did not start.  A recent hardware or software change might be the cause. »

  He asks me if I want to '(recommended) launch Startup Repair' or 'Start Windows normally'.

  When I select repair system, the screen turns off for half a second only and brings back me to the exact page as I was already on.

  When I select "Start Windows normally", he brings me to the loading screen that usually starts with Vista (anyone who says (c) Microsoft Corporation), except that it never stops loading.  I left for hours, and he was still on the same screen.

  I have a laptop Dell Inspiron 1525 with a processor Intel Core 2 Duo and Windows Vista Basic.

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• Error computer repair at each reboot of Windows Vista. Startup Repair says error ""could not repair.

  Original title: problem at startup

  Whenever I start my system, using windows 7 Ultimate a message for repair (recommended) or windows to start normally. When I go for repair, there nothing give a message "could not repair' why?

  Hello

  1. are you able to boot to the desktop?
  2 have you made any changes to the computer before the show?
   
   
   
  Method 1: Startup Repair is a Windows Recovery tool that can fix certain system problems that might be preventing Windows to start. Startup Repair scans your computer for the problem and then tries to fix it so that your computer can start correctly
  Reference: http://windows.microsoft.com/en-US/windows-VISTA/Startup-Repair-frequently-asked-questions
  
  Method 2:
  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem:
  http://support.Microsoft.com/kb/934540

• Windows Vista does not start. I tried to run the Startup Repair tool and we have tried to select start Windows normally.

  original title: URGENT

  How to start Windows Vista when 'Launch Startup Repair' or 'Start Windows normally' did not work? I want to avoid the deletion of my data.

  Hello

  for starters, the info you received a DVD of windows 7 repair vista usage are BAD

  you need a DVD vists or a vista Startup Repair disk repair vista

  and you can NOT do a repair installation of booting from a DVD in vista

  Repair facilities are on within an operating system

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  If necessary

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method depends on your hardware in the computer that failed

• How to fix "Startup Repair cannot repair this computer automatically.

  My computer not boot not correctly. I just get a blue page with an error message that says "Startup Repair cannot repair this computer automatically." How can I fix?
  The following problems:

  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  03:6 problem signature
  Signature of the 04:1114129 problem
  Signature of the problem 05: 0xa0
  Signature of the problem 06: 0xa0
  Signature of the problem 07:0
  Signature problem 08:2
  Signature of the problem 09: WrpRepair
  Signature of the 10:1168 problem
  OS version: 6.0.6001.2.1.0.256.1
  Locale ID: 1033

  Hello

  First disconnect the external devices connected to the computer except the mouse and keyboard.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  As Windows automatically launches the Startup Repair tool there is a possibility that she cannot cross the whole scan problems.

  I suggest that you do the startup repair using the Windows Vista installation disc and check if it works.

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, press any key to start Windows from the installation disc.
  Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
  4. choose your language settings, and then click Next.
  5. click on Repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click Startup Repair.
   
  Check out the link for more information below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  If startup repair does not resolve the issue then in the same way using the windows vista disc try to restore system until the day where computer was working fine.

  I hope this helps!

• Computer still needs to use the Startup Repair tool

  Original title: my computer still needs to use the Startup Repair tool and I did a full scan of my computer and nothing came, so I don't know why I always have to use the Startup Repair tool

  I have windows vista

  Hello

  ·         The Startup Repair succeeded?

  ·         You receive an error message or error message?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Follow the steps in the following article, and check, if that helps.

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem

  http://support.Microsoft.com/kb/934540

   

  Method 2: I suggest you do the startup repair using the Windows Vista disc and check if that helps. Consult the following link for the Startup Repair.

   

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Let us know if that helps.

• Does not work Vista startup repair cannot repair, System Restore cannot repair.

  I have a Dell Inspiron with Windows Vista. On commissioning, it is said: "Windows could not start. A recent hardware or software change might be the cause. "then offer to 'Launch Startup Repair' or 'start Windows normally '.

  When asked to boot normally, it tries to start, but broken, return back to this page.
  When he was asked to run the Startup Repair, it opens the program scans the system for several minutes and then says "Startup Repair cannot repair this computer automatically.

  When we click on diagnostics and repair details, it is said:

  "Last startup successfully: 03/10/2011 15:42:52.
  Number of repair attempts: 8

  Details of the session
  Drive system = \Device\Harddisk
  Windows directory = C:\Windows
  AutoChk run = 0
  Number of root causes = 1

  The test is performed:
  Name: Search for updates
  Result: Completed successfully. Error code = 0 x 0
  Name: Drive for System Test
  Result: Completed successfully. Error code = 0 x 0
  Name: Troubleshooting disk
  Result: Completed successfully. Error code = 0 x 0
  Name: Metadata for the drive Test
  Result: Completed successfully. Error code = 0 x 0
  Name: Target OS Test
  Result: Completed successfully. Error code = 0 x 0
  Name: Checking content Volume
  Result: Completed successfully. Error code = 0 x 0
  Name: Diagnostic Boot manager
  Result: Completed successfully. Error code = 0 x 0
  Name: Diagnosis of the system startup log
  Result: Completed successfully. Error code = 0 x 0
  Name: event log diagnosis
  Result: Completed successfully. Error code = 0 x 0
  Rated: Internal audit of State
  Result: Completed successfully. Error code = 0 x 0

  Root cause found:
  Startup Repair tried several times but still not determine the cause of the problem. »

  If not, we can look at the advanced settings:
  System Restore = "no restore point created the disk of your computer system. To create a restore point open System Protection.
  Windows complete PC Restore = "a valid backup location is not found. Windows cannot find a backup on this computer. »
  = Windows Memory Diagnostic tool does not solve anything when parsing
  Command prompt
  Reference Dell Factory Image Restore = not tried but am avoiding wiping all your own hard drive for as long as possible...

  He's not in Mode safe, and I don't know what is happening. It happened when I shut it down (holding the power button down) update that it had frozen.
  What should I do? Thank you.

  Hello

  Method 1: I suggest that you do the startup repair using the Windows Vista installation disc and check if it works.

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  a. Insert the installation disc.

  b. restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  c. If prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  d. choose your language settings, and then click Next.

  e. click on repair your computer.

  f. Select the operating system you want to repair, and then click Next.

  g. in the System Recovery Options menu, click Startup Repair.

  See: How can I fix a startup (startup)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  Method 2: If above method fails, then run the command chkdsk WinRE (Windows Recovery Environment) and check if it solves the problem:

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Note: Select command prompt from the system recovery options and follow the mentioned below as follows:

  Type the following command and press ENTER.

  Chkdsk /r

  Note: Chkdsk /r command erases / corrupted hard disk data corrections. Some of your personal files/data may be erased.

• Launch Startup Repair does not work

  Hi, the 'Launch Startup Repair' option does nothing for my installation of Windows 7 64-bit edition.  If I select the screen simply refreshes and presents me with the same two options - Launch Startup Repair and start Windows normally.  It's as if something prevents me to attempt any repair solution.  Anyway, which would cause Launch Startup Repair does not have to work.  Thanks if someone can advise.

  Hi, the 'Launch Startup Repair' option does nothing for my installation of Windows 7 64-bit edition.  If I select the screen simply refreshes and presents me with the same two options - Launch Startup Repair and start Windows normally.  It's as if something prevents me to attempt any repair solution.  Anyway, which would cause the launch startup repair does not work.  Thanks if someone can advise.

  Hello

  It may be damaged.

  If you have problems with the use of the built-in repair software:

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  "This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

  A system repair disc is not able to install Windows 7.

  Note

  If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  _____________________________________

  Then, use this disk for System Recovery Options:

  "System recovery options".

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  See you soon.

• Startup Repair loop - cannot start Windows

  Hello

  I have problems with repair system continuously in a loop and it is not letting me open my computer.
  Once he arrives, he works to try to find a problem and then can't find the problem. It is said "If you have recently attached a device to this computer, such as a camera or portable music player, remove it and restart your computer.
  I don't have anything fixed, but I will tell when it first happened, I got my attached flash player. Since then, it is not attached.

  Here are the details of the diagnosis of start-up and repair repairs:

  Journal of diagnostic and repair repair startup
  -----------------------------------------------------
  Last sucessful start: 2010-05-24 04:31:12 (GMT)
  Number of repair attempts: 18

  Details of the session
  --------------------------------------
  System disk = \Device\Harddisk0
  Windows directory = C:\Windows
  AutoChk run = 0
  Number of root causes = 1

  The test is performed:
  ---------------------------------
  Name: Search for updates
  Result: Completed successfully. Error code = 0 x 0
  Taking time = 16ms

  The test is performed:
  -----------------------------------
  Name: Drive for System Test
  Result: Completed successfully. Error code = 0 x 0
  Taking time = 0ms

  The test is performed:
  --------------------------------------
  Name: Metadata for the drive Test
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 140ms

  The test is performed:
  --------------------------------------
  Name: Target OS Test
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 141ms

  The test is performed:
  --------------------------------------
  Name: Checking content Volume
  Result: Completed successfully. Error code = 0 x 0
  Time taken = s 280ms

  The test is performed:
  --------------------------------------
  Name: Diagnostic Boot manager
  Result: Completed successfully. Error code = 0 x 0
  Taking time = 0ms

  The test is performed:
  --------------------------------------
  Name: Diagnosis of the system startup log
  Result: Completed successfully. Error code = 0 x 0
  Taking time = 0ms

  The test is performed:
  --------------------------------------
  Name: event log diagnosis
  Result: Completed successfully. Error code = 0 x 0
  Taking time = 110ms

  The test is performed:
  --------------------------------------
  Rated: Internal audit of State
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 62ms

  Root cause found:
  ------------------------------
  Startup Repair tried several times but still not determine the cause of the problem

  --------------------------------
  --------------------------------

  Then he repeats the same thing 3 times...

  I tried to do a system restore did not work.
  I tried to start with last known configuration work. Did not work.

  Does anyone have an idea what I can do for the next step and how to fix this?

  I installed SP2 less than a week ago, and I was working on a problem with the malware as well when this happened

  Any help would be appreciated!

  Thank you

  Lucas

  Hi lschoen114,

  Remove all CD/DVD and restart the computer. Press the F8 key as soon as you start it again, until you reach the Advanced Startup Options menu. Select disable automatic system failure reboot so you can enter the code of stop error when startup fails.  View the details on the screen.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer guard direct me to the Windows Startup Repair loop. Is this a virus? If this is not the case, what should I do?

  OK, here's a little history:
  When was surfing the Internet (using Mozilla Firefox), he froze and said that he "did not." Then I left the computer alone for a good 15 minutes, but to realize that nothing happened. From there, I decided to disconnect the computer to see if I can re - open Firefox. But when I tried to connect it back, the computer take me on the desk. It was stuck at the screen that says 'Welcome' (the form that appears after clicking on your user name) in the end, I turned off the computer by holding the power button, because there was nothing I could do. When I turned on the computer a few minutes later, it was time that I met a huge problem.

  The problem:
  When I turned it back on, a black screen appears that gives you the ability to boot your system with a repair on your computer, or start normally. I chose "start normally. After that, it took me a blue screen with a window that says "Startup Repair". He began to scan the computer saying «attempted repairs...» "When I saw this, I turned immediately shut down the computer, thinking it was some sort of virus that pretends to fix the computer. Nevertheless, I decided to turn it on for the second time. Of course, it's the same thing. But this time, I allow the scanning process to complete. When it was over, he said that the system could not be repaired and advised me to contact Microsoft, with my "contact information." I took this as a red flag, and click Cancel. I suspected it was an attempt to identity theft. (Though, I could be wrong, of course.)

  Honestly, I don't know if if there is indeed something wrong with the computer or if it's a virus.

  I tried to find out by going online and looking for solutions. From there, I tried a method where you press F8 several times until the Advanced Boot Options go up and selected "Last known Configuration" that did not work. I also heard on the "chkdsk" method, but I don't know how to do and there is no guarantee this will work.

  After that, I did more research and realized there were several ways to solve this problem. But when I went through the tutorials, the steps have been very confusing to me. I felt like most of these tutorials aimed computer technicians or people who knew in fixing computers. The steps were so confused until I found myself referring more questions than real answers!

  So now I'm reaching out to help, and I really need! It would be greatly appreciated! I really don't want to format all my data.

  Please keep in mind that I am a lover of computers operating. The two programs I normally use are Mozilla Firefox and Microsoft Word. So please don't be assuming that I know my way in and out of a computer. I'm no where near, in every sense of the term, an 'Expert '. If you can, I would like a simple, easy to follow, simple tutorial, step by step, which is not turned to professional users. Still, I am not very competent in operating computers.
  

  Hello

  You have tried yet.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

  p.s. If the message is genuine, please read this:

  The startup repair options are provided with a large number of systems of operating pre-installed.

  If this does not work, please read this

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

• LOOP OF STARTUP REPAIR... Windows 7, 64-bit, SP1

  Hello.

  I have a laptop Dell Inspiron 64-bit SP1 Windows 7. I tried the commissioning and startup popped up repair.

  I have read online and tried the Mode safe mode with command prompt. It did not work. I also tried the Startup Repair. It doesn't work any more.

  (When I tried the three Security Modes, it just led me to repair system screen.)

  Problem event name: StartupRepairOffline
  Signature of the problem 01: 6.17600.16385
  Signature of the problem 02: 6.17600.16385
  Problem Siganture 03: unknown
  Signature of the 04:-1 problem
  Signature of the problem 05: AutoFailOver
  Signature of problem 06:7
  Signature of the problem 07: CorruptRegistry

  Please help me ASAP!

  Edit 1: I don't have an ERD. I don't have a USB key. Is it possible that I can do a 'repair USB,"instead of a repair disc?

  Edit 2: I can't contact my manufacturer... My parents will get mad...

  Edit 3: My computer allows once again? Or do I have to buy a new one? I think I have a MacBook.

  Hello

  If you really tried all of those then I would do a clean install.

  Installation Windows 10 using the creation of media tool - create a support and then
  Start with her.
  http://Windows.Microsoft.com/en-us/Windows-10/media-creation-tool-install

  Clean install of Windows 10
  http://answers.Microsoft.com/en-us/Windows/wiki/windows_10-windows_install/clean-install-Windows-10/1c426bdf-79b1-4D42-be93-17378d93e587

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Vista Home Premium SP1 Reboot loop infinite, inaccessible Windows restore

  Problem: Update marked Service Pack 1 (I do not know the real KB #) sent my computer in an infinite loop.  After a reboot "3 3 0% complete configuration updates / don't turn off computer" appears and the percentage continues to 100%, the system reboots and repeat.  I left the computer to update last night and now he has been yet updated this morning.

  Is trying to solve: I studied what I can on this problem.  I tried to access the system restore via the following methods:

  1. Shut down the computer, restart the Advanced Boot Options screen boot mode safe.  Result: after the appearance of the logo windows at startup, the screen returns to the screen "Update Configuration".  This is the case on 'Safe Mode', 'Safe Mode with networking' 'Last good known Configuration (Advanced)' and "Directory Services Restore Mode" I have not tried other options in the screen options start
  2. Using the recovery DVDs I've done after the installation of Vista (circa Dec. 2006): result: restore option only includes the restoration of the recovery image of boot sector with a complete HD wipe factory-installed.  Not the restoration of the system of options available.

  Plug material: I have (obviously) Vista Home Premium installed above a factory installed Windows XP Media Center (SP2).  Partition 2 contains an area of recovery that will restore the original settings.  Another partition is Ubuntu, which is how I can log in and post this message.  Also:

  • Model: Compaq Presario SR2050NX Media Center
  • Processor: Intel Pentium D 2.8 GHz dual core
  • MoBo: ESC Asteropi 3
  • Chipset: ATI RC410
  • Southbridge: ATI SB400
  • Memory: 1024 M DDR2 - SDRAM (PC2-4200/PC2-4300/533 MHz)
  • HARD DRIVE: 250 GB
  • OS: Windows Vista editions Home Premium on XP Media Center SP2
  • Secondary to OS: Ubuntu 9.04

  Computing: Average
  
  Mood: upset

  My goal is to restore the system to a point before the installation of the update.  I didn't want to wipe the system and start over.

  Thank you
  TB

  Do a repair disc to do a repair system restore / boot:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  If this does not work, now looking to relocate, because you have only the factory recovery disc.

  Mick Murphy - Microsoft partner

• Windows 7 reload in infinite loop: Dell E6400 laptop

  Laptop Dell E6400 frozen at windows startup. At the command prompt and started Windows 7 32-bit reinstall from CDs. Reinstall has not completed, now it's this loop: starts windows - "the installation program starts services", then error message "computer... met an unexpected error... cannot continue... click OK to... to restart the installation.» I downloaded Win7 disk image - it is on the USB. When restarting, press F8 and choose Safe mode with command prompt, but it never gives me a command prompt, or will it take the USB. I also tried 'disable automatic restart in the event of system failure' as suggested in another post, but nothing never happens to me to where I can run Win7 reload. Please help me out of this infinite loop.

  Hello

  I can imagine the downside of not being able to make it work as it should, and I'll be happy to answer your query. I appreciate the efforts made in the patches that you tried.

  This could be due to a hardware failure as well.

  From now on, I would ask to refer to the suggestions in the thread below link and check the status.

  Repair Windows 7 boot loop

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Has managed to recover from the infinite loop restart Vista SP1 "configuration updates stage 3 of 3 0%"- but Windows Update always wants me to install Vista SP1!

  WIndows Update asks me to install Vista SP1. I did and got into the infamous infinite loop of SP1 (infinite loop ' configuration updates stage 3 of 3 0% "with Vista SP1). I used F8 to repair my computer, and I chose a restore before the SP1 update point has been installed. The restore point has been applied successfully, so I have the computer in the back. Super. However, Windows Update wants me reinstall Vista SP1. Needless to say, I am reluctant to do so. But I want to be aware of the Windows updates. What do I do? TIA

  (With the help of Vista Home Premium)

  This gives a whirlwind:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. right click on the file that you saved in # 1 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  5. ensure that the http://support.microsoft.com/kb/955430 and http://support.microsoft.com/kb/947821 have been installed. (If they were, they would belong to installed updates. If they don't, try to manually download/install.

  6 test cycle.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft