State of the image and the change of image

Similar Questions

• List of States causing the change of State of scrolling

  Hello
  I need a list where each line can be enlarged/reduced to show/hide the additional data. I need to use something like a control list for performance (i.e. cannot use repeaters), and I've implemented a solution provided here:
  http://weblogs.Macromedia.com/pent/archives/2006/04/a_list_itemrend.html
  However on this solution when extending the first 3 lines and then start scrolling, the States change. The same happens on my own custom solution. I tried to put in place currentStateChanging event to pick up the target of the event but you do not. I don't know why this happens, but starting to think it's a matter of Flex that don't have a resolution?
  
  Any ideas or suggestions on how to implement my list or popular explanations?
  Thank you
  Orla

  "spatz04" wrote in message
  News:gcl3ah$JDF$1@forums. Macromedia.com...
  > Thanks for your help Amy.
  > I found a solution to my original problem, I put a flag the
  > data object to determine the State of each line and that works. However, the
  > the scrolling is so messy its not usable. Scrolling jumps around in the
  > place.
  > I guess it's a trade out of the use of the list instead of a Repeater
  > and
  > doubt there is a way to solve this problem.
  >
  > If anyone knows or has a solution to this problem of scrolling
  > may
  > you lt me know?

  I think Peter Ent says somewhere on his blog that it is not worth the time of
  try to get this working with variableRowHeight and lists.

• States of the changes by using the drop-down list box

  I have created a form with payment options in Adobe Flex. There will be 2 options of payment, cash and credit card. When a user selects an option it must fill in a few details. I created different States for the option of credit and card, which will appear as and when the option is selected. I'm not able to get the change to the State when an option is selected. Please help me in this regard.

  Try this:

  public function paymentState (): void
  {
  If (payment.selectedItem.label == 'Cash') {}
  currentState = "CashState";
  }
  Else if (payment.selectedItem.label == 'Credit Card') {}
  currentState = "CreditState";
  }
  Else if (payment.selectedItem.label == "Chèque") {}
  currentState = "ChequeState";
  }
  }

• Are made and shipped to the United States at the Canada Apple books and so have shipping and additional costs due to the change of currency?

  Are made and shipped to the United States at the Canada Apple books and so have shipping and additional costs due to the change of currency? A book of dollar $50 USA could go to over $ 100.

  Apple print products are quoted and charged in the local currency

  and the calculation of your Exchange rate is whack too - the CD is $0.77 USD - no $0.. (50) but the exchange rate is not serious since quotes and fees are in local currency

  LN

• Help with image files, drop box and save the changes?

  My husband put all our photos of drop box.  They are still on our computer, but we can now also access elsewhere.  But it has somewhat modified files.

  I'm putting together, cultures and (in general) to save the changes made to some images.  But I get an error.

  Example: The image I want to change is on the side.  I right-click on the file icon and select "Rotate clockwise" in the menu dropdown. Immediately, I raise the sound "bonk" and an error message appears: "you cannot rotate this image.  The file can be used or open in another program or maybe the file is read only.  It wasn't a problem before doing things to the drop box.

  So, I wait to make sure that everything is ok.  The image is not open anywhere else.  I clicked the properties option to see if it is in read-only mode.  He said that it is not.

  When I open the image and try to use the rotation on the bottom, it will turn.  But when I close the window, I get a different error message that says "Windows Photo Viewer cannot save changes to this picture because there is a problem with the properties of the image file."   There is a link at the bottom of the message box for "Why can't save this picture?  I clicked it.  He said "the subject you are looking for is not available in this version of Windows. For additional assistance, see multiple support options. "The more support options?  Get a tech savvy friend who could help me. Nice.
  Anyone know what I need to do to make this work?
  I don't know what version of windows we have.  I'm sure that's not Vista.  It's the one after that.

  Hello

  Thank you asking in the Microsoft Community.

  1. open Microsoft paint.

  2. navigate to the image through Microsoft Paint.

  3 try to rotate and save the image.

  4 let me know if you are able to.

  Post back with the result.

• Im trying to buy photoshop but it keeps saying that its not available in my area. I am in the United States and in my area gets bad! I even updated to the United States, but it is not record the change!

  Im trying to buy photoshop but it keeps saying that its not available in my area. I am in the United States and in my area gets bad! I even updated to the United States, but it is not record the change!

  Hi Mariam,

  It seems that your ID Adobe was initially registered in Pakistan due to which it is not allowing you to make purchases in the United States.

  You can create a new Adobe ID, register in the United States and then it should allow you to make a purchase.

  Let us know if it works or not.

  Thank you

  Yann Arora

• moving to the United States to europe and cannot change the country on my payment page of change. new euro credit card. Help, please!

  just moved to the United States to europe and do not know, I managed the change of credit card.

  I can put the new card, but can not change new address outside the United States. not sure that the payment is going to BE true.

  Thanks for the Info!

  Hello

  The country store & the Adobe ID, payment details must be same.

  For tax reasons, it is not possible to change the country associated with an existing Adobe ID. To work around the problem, you can create a new Adobe ID to the e-mail address associated with your existing Adobe ID see the link for instructions:

  Change the country associated with your Adobe ID

  If you wish to contact our support group for assistance, please visit this link: (be sure to connect to adobe.com with your Adobe ID first)

  CC_membership-account-payment-support

• Using "States" on the image and text together

  I'm having a problem with 'States' of an image with text above. I would like for the image to 100% opacity and text to be hidden in the States 'normal' and 'active '. In the States of "mouse down" and the 'reversal', I would like the image to have an opacity of 20% as well as the text to be visible.  Basically, I'm trying to achieve a similar effect to this Web page: http://www.shedbuilt.com/#mi=11 & pt = 0 & pi = 39 & p = -1 & a = -1 & at = -1. I can define States for text and image separately, but I would like that they work as a single object when it is tilted. Thanks for your help!

  Try the widget status button

  Abhishek

• Problem with the change of a 'State' the substitution of one break of the chronology of the objects

  Here is my setup: I have a single slide for learning select 9 melodies 'text buttons' to view 9 different definitions.  To do this, I set myself to each buttons to change the "State" of the original image for the introduction of a 'legend of text' containing the definition of that label of buttons.  I also three navigation buttons (output, back and next; button_19 _20 & _21) with breaks built into the end of the timeline. coinciding with the end of the audio narration for this slide.

  Here's my problem: the calendar runs and stops as it should until the learner chooses one of the 'text' buttons after that the timeline is suspended; how it seems to send a command to "continue" and substitutes at the break, and brings the learner to the next slide.

  This has something to do with the function "States"?  I used to do exactly the same thing in Cap 7 with stocks advanced without any problem.

  Thanks in advance for the help.

  v/r

  Jay

  

  If it's 9 Captivate, locate the box continue a project of play in the Actions section and deselect buttons for each.

• Selection and adjustment on several States at the same time?

  I'm using Fireworks CS4

  Is it possible to make a selection and what adjustments you make to do this request at the same place in multiple States (or all)? For example, I wanted to change the color of a drawing of a vase that is in the same place in 15 States. The best I could come up with was this:

  1. make and save a selection
  2. fill with the new color
  3. go to the next State
  4 Select all (could not load the saved selection after the passage of the States without doing anything first)
  5. load the saved selection
  6. fill with the new color
  7. Repeat steps 3 to 6 13 times more

  
  Thank you.

  A. Select State 1.

  B. open the layers panel, create a new empty layer.

  C. slide the vase to the new empty layer image object, keep it the active layer.

  D. high to the right of the layers panel, click the icon in the properties panel, and then in the list choose layer part in the States.

  E. always with 1 active state, make your selection + change color on your image of vase object.

  The change will be filled in all States.

  I suggest that B and C just to isolate the item you want constant (Shared with the States), while keeping all other single State objects.

  h

• When I use Firefox to watch the changes I make to the HTML files locally, it does not show changes made to images, unless I restart the browser. Is this a bug?

  I have the local and versions at distance of a page is open in two tabs. I change images (keeping the same name in the HTML code) and download the modified image. The tab that displays the remote page does a refresh to show the change. The tab showing the local page of do not. I tried to open it in a new window, but it still doesn't change. Only if I restart Firefox does show the change. Why? Is this a bug?

  Try using Ctrl-Shift-R or Ctrl-F5 to reload the page. This tells Firefox to reload all the content on the page, ignoring cached assets copies.

  I don't know why this is happening in the first place, although I suspect it may have something to do with the fact that the remote copy is loaded from a web server (including a bunch of headers allowing browsers to know when we need to get a new copy of an asset), while the local copy is loaded directly into the file system.

• change the State of the button

  Hi, I'm new to labview and I have a few questions.  I came to a point in my code where I'm stuck.  I have attached the code so you can see where I am.  My problem comes into play with the toggle button.  I need to know if there is a way to change its operation based on a condition.  I want to it have where when you press the button, it remains pressed.  But if it meets a condition, it turns itself off.  In my code, I have a point where I need an output message, but because the State of the button does not change, it keeps out the message unless I have disable the program.

  If that makes sense, anyone know of a solution to this?

  Thank you much for the help in advance.

  You can use a local variable of the control inside the structure of case where you write a fake to she to him popping up when you need to.  Your not actually change its operation, but it allows you to programmatically change the current state of the button.

• I downloaded service pack 3 and it changed and took some of my programs.how can fully restore the initial configuration and start over?

  I downloaded service pack 3 and it changed my programs taking some. How can I reset and delete and go back to factory settings and start over?

  Hi Daddyguy,

  Please read this article which gives detailed instructions on how to restore Windows XP to a previous state. http://support.Microsoft.com/kb/306084

  I hope this helps. Just reply to the results.

• Can not put date format as "yyyy-MM-dd" for Chinses (PRC) and English (United States) at the same time. Win 7 PRO

  Step 1. I choose Chinese (PRC) in the list format (region and language) and set the format of 'YYYY-MM-dd' date, apply. It is ok.

  Step 2. I choose English (United States) in the list format (region and language) and set the format of 'YYYY-MM-dd' date, apply. It is ok.

  Step 3. I chose the back to Chinese (PRC) in the format list (region and language), format date is reset to "YYYY/M/d", it is not ok for me.

  How can I set the format of a two language. ?

  Because I use the siemens industry software, when to change language it will read the date format different from the language that is displayed. My client want to see the same format.

  I tested under Win XP, it may set the format even in different languages

  Hi Jerry,

  Thanks for posting the request in Microsoft Community Forums.

  It is normal that you can not set the same date format for both languages at the same time. You will need to use the drop-down list to choose a date format customized if necessary.

  Hope this information helps.

• I run the program "TuneUp utilities" and I recently received a notification of the statement that "the BHDrvx64device does not work correctly.

  I run the program "TuneUp utilities" and I recently received a notification of the statement that "the BHDrvx64device does not work correctly" program proposed to update the driver, but there is no provision in any of the dialog boxes.  Windows Help and support says: help for this program was created in Windows Help format, which depends on a feature that is not included in this version of Windows. However, you can download a program that will allow you to view help created in the Windows Help format. All this brought me here, please, how to fix this?

  The last thing you want to do is install and run any third tuneup/Optimizer program.

  In the worst cases of such utilities can cause system failure or program, uninstall it, having restored firstly of the changes he could do.

• I try to copy a CD but get an error in the column State of Rip. Has not changed any option, as I just ripped a CD yesterday. HELP PLEASE!

  I have NEED of HELP PLEASE I am trying to copy a CD but get an error in the column State of Rip. Has not changed any option, as I just ripped a CD yesterday.  HELP PLEASE!

  Hello

  1. What is the exact error message?

  2. is the issue specific to this particular CD/DVD?

  3 did you changes to the computer, before the show?

  Method 1:

  Run the Windows Media Player settings troubleshooter.

  Open the troubleshooting Windows Media Player settings Troubleshooter

  Method 2:

  Change the settings for the extraction of music and the audit.

  Change settings for ripping