Why did I lose the mouse in the onfull for the media center screen

Similar Questions

• Why did I lose my mouse when in media center

  • Why my mouse cursor does not disappear when I go into windows media center?

  Hi Abobeyes,

  Try the following steps.

  1] open the control panel.
  2] double-click mouse.
  [3] click on the pointer Options.
  4] uncheck the box against display pointer trails under the visibility.
  5] click OK/apply.

  Previous post: the result.

  Bindu S -Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Why did I lose the buttons in the comments to the newspaper in Firefox, but not in Google Chrome

  I read the Huffington Post from time to time and you want to comment on some articles. Each comment in Google Chrome has three buttons at the bottom and select either:
  Response
  Favorite
  Flag of abusive

  Now, if I have access to the site ( http://www.huffingtonpost.co.uk/) via Firefox, there is only the opportunity to respond to the comment. Why is this, is this something to do with Adblock that I activated and find it really useful.

  Thank you.

• Why did I lose the connection IE after standby mode for one hour or more?

  THAT IS TO SAY 8, XP SP3

  Control Panel > system > Hardware tab > Device Manager. Expand the category network adapters and you use to find the network card (wired? wireless? you did not). Double-click the entry to get its properties. On the power management tab, uncheck the "allow Windows to turn this device when not in service. MS - MVP - Elephant Boy computers - don't panic!

• Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  WiFi connections are losing their strength increases the distance between the router and so as a general rule, there are some conflicting objects

  Try the following steps please

  The following actions and after each test to see if the issue is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

  1. Check if the problem is related to a single device and if other devices connect normally-
  2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
  3. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
  4. Settings - WiFi - < network name > - Click on forget network - do a restart forced according to 3 and then add again the network
  5. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
  6. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
  7. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
  8. Backup the device to iTunes - restore as NEW (no) - see if solves problem - if yes - restore backup
  9. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• Xbox 360 Media Center Extender loses the connection to the media center to Windows 7 after change of router

  I have a Windows 7 Media Center box, and an Xbox 360 that I use as an Extender.  The two connections to the same wired router.  Everything worked fine until I went on my old router (failed) and put in a WNDR4300.   After the new router has been installed, I didn't have the Extender work then, deleted from the media Center and re - he added.  It worked but after I shut off/started the xbox, no link.  It is repetitive: I can make a new connection, but then it didn't reconnect after reboot of the xbox.

  Check/change:

  -J' changed to a static IP xbox

  -There is no part 3 a / v or a firewall on the support center

  -L' on the media center network adapter is 'home '.

  -The network card on the media center * fact * show the xbox 360

  -The event log after the xbox is restarted shows:

  event ID 538: installation of media center extender does not like the Extender has been detected on the network, but for the Extender upnp search failed (timed out after 20000ms)

  -How long before it, I have found that the service IS running upnp device host (and set to auto)

  -J' checked 4300 router wndr and UPnP is enabled (advertising set to 30 minutes)

  question, any ideas what configuration will solve this problem?

  Hello

  I suggest to look and ask here:

  https://support.Xbox.com/en-us/browse/Xbox-360?XR=shellnav

  http://forums.Xbox.com/

  http://www.thegreenbutton.TV/forums/

  See you soon,.

  J

• When I take the Media Center it takes 4 minutes to load

  Recently, I cloned and replaced the HARD drive with a much larger (thanks to the Olympic Games in HD).  Everything works fine, except for the fact that when I wake up in the MCE to watch a program that the screen is black (I can see the mouse and move it) and it takes several minutes before I see the recorded shows section.  The Web browsing is slow for a nother minutes.

  I tried to optimize the media center with nothing doesn't.

  Last option is to reinstall windows, but then I lose all my programs.  Is there a way to save the old programs so she would see a new installation of windows?

  Let me add that I tried to stop MCE and then go back, not help.

  I will suggest you to download and install the latest graphics driver. Visit the manufacturer's Web site to download and install the graphics driver.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If you are looking for a re installation: -.

  Back up your files before you begin reinstalling Windows 7 if possible, even if you have reinstalled Windows 7 on a hard disk partition, and you have personal files on another partition. For example, if you have encrypted files, you will not be able to access them after reinstalling Windows. A custom installation replaces the current version of Windows 7 and all personal files.

• Qosmio G20-111: after disk HARD changing the Media center does not work

  Hi, I have a WME Quosmio G20-111, after a hard drive, toshiba support center evolution (disc hard bone) in Italy has reinstalled the WME but whenever I try to use the Media Center pc crash and show me a white screen. After several phone call they told me that the problem is that they don't update quosmio drive drivers?
  I'm desperate, any suggestions?

  [email protected]

  Hello

  Well, as far as I know that the Qosmio Player has been installed on the partition hidden on the new laptop, but perhaps the ASP is not install this application after replacing HARD drive.

  But I do not understand why the missing Qosmio Player should have a bad influence on the media library? MC is a Microsoft program that is part of the Windows XP MCE. Player of Qosmio is an invention of Toshiba and should have nothing to do with the MCE.

  However, you can try to install the Qosmio Player and then try to recover the entire operating system with the recovery CD Toshiba original delivered.

  Maybe it helps.

• The keyboard on the Windows Media Center screen does not appear when I hit the enter keyboard key!

  I searched through the internet trying to find a solution to this annoying problem: after change to enter the registry and the application of the value entered for showOskOnKeyboardEnter under MCE. PerUserSettings, I always have problems serious on-screen keyboard to appear by using the key "Enter" on the keyboard.  I managed only a couple of times to get the OSK to appear among the dozens of attempts, however, I am unable to recreate the actions - is absolutely not stable.  The only area that reacts to the 'Enter' key is looking for music.  All the fields in the section of Netflix and movies search fields are unresponsive.  Not even works tap triple function.  The only compatible and possible way to have the OSK appear is to double click on the field - that does not work given that the goal is to have an IR remote with the Media Center application interface.  The button 'OK' on the remote control is mapped to the Enter key (except if WMC has a key code value for the 'OK' button).  Help, please!

  I had this problem and it was very frustrating.  The posted solution did not work for me initially.  What I've discovered, is that you have closed Media center before editing the registry.  If you change it while it is open it does not pick up the change and then save settings (i.e. with showOskOnKeyboardEnter = 0) when you close.

  Then...
  1 close Media Center.
  2. follow the steps of the posted solution: http://mymce.wordpress.com/2011/04/20/on-screen-keyboard-in-windows-media-center-doesn ' t - appear /
  3. Open Media Center.
  Should work now.

• How can I use the Media Center to watch video content on my smart TV

  Separated from this thread.

  How can I use the Media Center to watch live video content on my smart TV with Wifi. I couldn't find the instructions to do with Media Player, which I did not

  Separated from this thread.

  How can I use the Media Center to watch live video content on my smart TV with Wifi. I couldn't find the instructions to do with Media Player, which I did not

  do you mean WiFi Direct or WiDi (wireless display)? If WiDi, you need Intel WiDi software installed on a compatible computer.

  What brand of TV and the exact model? If you have Windows Media Center on your computer, you should have Windows Media Player. You can have it disabled in programs, but you can reactivate.

• Xbox 360 will not connect to the Media Center after that PC has been asleep

  My Xbox 360 connects to my Media Center as an Extender initially. When it works, it works very well. However, after my PC has spent time in a suspended state, it is at 75% chance that my Xbox won't be able to connect to the Media Center. Sometimes it will work, but more often it won't.

  Restart my PC will allow the Xbox to connect immediately, but this isn't an ideal solution. I wish I could have my PC of a suspended state wake and correctly connected to the Xbox media extender.

  Hello

  (1) did you make any changes before the show?

  (2) is the specific question when the computer wakes from sleep?

  This problem may occur when the power is suspended in the media extender. I would have you go through the articles that might be useful.

  Method 1: Tips for solving problems with Windows Media Center Extender Setup

  http://Windows.Microsoft.com/en-in/Windows7/tips-for-solving-Setup-problems-with-Windows-Media-Center-Extenders

  Method 2: Windows Media Center Extender: frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows7/Windows-Media-Center-Extenders-frequently-asked-questions

  Reference:

  Set up Windows Media Center on the Xbox 360 (Windows 7)

  http://support.Xbox.com/en-in/apps/Windows-Media-Center-on-Xbox-360/Windows-Media-Center-on-Xbox-360-Windows-7

  Let us know if that helps.

• How to I put online media and program libuary on the Media Center, I have everything expect those two, they are absent

  online media, absent on the media library

  How to I put online media and program libuary on the Media Center, I have everything expect those two, they are absent

  Check the settings of language and the region under the Control Panel, make sure that it is there.

  You can also try a manual download by pressing 'Download now' tab under tasks > settings > General > automatic download in WMC options.

  Make sure that during this firewall or IPSec is does not interfere with the download.

  If the above does not help then run Setup again.

  [Tasks > settings > General > installation Windows Media Center > rerun him.]

  Make sure you have the latest version of Silverlight or Adobe Flash Player installed.

  S.Sengupta Media Center MVP

• Where do you buy the media center remote control?

  Where do you buy the media center remote control?

  Hi John,.

  What operating system is installed on your computer?

  You can buy the remote control for Windows Media Center of Windows Store:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  Reference: use a remote control with Windows Media Center

  Hope the helps of information.

• How to change for the Media Center guide download time?

  How can I change the Media Center program guide download time?  My computer comes out of hibernation to download data at 12:15 and to sit down again it idling (for several hours) until she was put into hibernation or stop.  There is a utility that will change in time, but time is always changed back to the time of 12: 00.  I guess MC changes the time of return.  Thanks in advance.

  Hello

  You can follow the links below and try the advice given to solve the problem.

  http://Windows.Microsoft.com/en-us/Windows-Vista/download-updated-Guide-listings-in-Windows-Media-Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-guide-downloading-problems-in-Windows-Media-Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-Guide-listings-for-use-in-Windows-Media-Center

  Choose the manual option down and check if that helps.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Where can I find the Roll Up 2 update for Windows Media Center Edition 2005?

  I'm trying to download Media Player Version 11 and it says that I need to first install the Roll Up 2 update for Windows Media Center Edition 2005.

  Hello

  Before installing Windows Media Player 11 on Windows XP-based computer, you must download and install the Update Rollup 2 for Windows XP Media Center Edition 2005 on your computer.
   
  Initially, download cumulative update 2 for Windows XP Media Center Edition 2005 from this link.
  
  Update Rollup 2 for the Windows XP Edition Media Center 2005 (KB900325)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=12939
   
  Check out the link below to install Windows Media Player 11 on Windows XP.
  Windows Media Player 11 for Windows XP
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8163
   
  For more information, see Help links.
  File Readme for Windows Media Player 11 for Windows XP
  http://Windows.Microsoft.com/en-us/Windows-XP/products/Windows-Media-Player/11/Readme
   
  Update Rollup 2 for Windows XP Media Center Edition 2005
  http://support.Microsoft.com/kb/900325
   
  It will be useful.