Static of the speaker and his helmet

Similar Questions

• Sound is comin from the speaker and headphones at the same time. How to solve this problem?

  Hello! I installed win7 professional and upgrade to ultimate and when I play a music or vdo sound is coming from the speaker and the headphones. I have a 3ghertz Pentium 4 with 1 GB of ram, and it runs the 32-bit version. And also the headphone option is not present in the peripheral reading option.
  Can any1 please please help me?

  We consider that your machine uses Realtek HD audio-
  (Older versions of Realtek HD audio drivers may have a slightly different form, but the)
  basics should be the same).

  There are two ways to set up the helmet when it is plugged into the façade decision-making;
  (1) in Realtek Manager of her go to Advanced Settings feature in the upper right of the window.
  Check the circle next to cut... plugged back.
  When this fact was you must also click on the yellow folder icon below the
  Device settings advanced and check 'Disable protection of jack façade' is clear.
  -Of the drawbacks of this method are that you do not get an option of separate settings for headphones.
  then they use the same environment as your speakers and EQUALIZER settings, but you can use both the
  speakers and the headphones if you wish.
  -Note that with this option, the helmet does not show in Sound Manager window.

  (2) advanced settings in the sound Manager go to Realtek device.
  The check box next to do advance... at the same time.
  This will disable the speakers when headphone is plugged in the socket of the façade,
  and return to the speakers when headphones are disconnected.
  Also check one or more of the boxes below, according to your need.

  -With this setting, there is an option for headphones in the two Windows Sound manager
  and Realtek HD Audio Manager.
  -With this setting, it does not matter which option to use in yellow folder as the setting icon
  is ' either / or '. You cannot run at the same time the speakers and headphones.

  -Note that with games the headset must be connected prior to spear the game, or
  the default set to the speakers.

• I just spilled some water on my iPhone 6 near the speaker and listener made holes idk if water has penetrated or does it damage my iPhone please help!

  I just spilled some water on my iPhone 6 near the speaker and listener made holes idk if water has penetrated or does it damage my iPhone please help!

  See if there is an indicator of Contact liquid on your iPhone > liquid for iPhone or iPod is not covered by the warranty

• the sounds coming from my computer speaker AND my helmet... at the same time?

  Whenever I plug my headphones in the front or back made headphones, I can hear from the computer and my headphones at the same time. How can I fix?

  For other references that can help you answer my question easier, I don't have the Realtek HD Audio Manager installed, but is not help me a lot.

  Hi-DonutBolton, 00

  I suggest to try the steps from the following link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows (Skip title)

• the President and his

  When I turn on the top of the Tower, I have a RED 'X' on the "speaker" icon.  SO, I try unistall speaker.  Restart the pc.  Sometimes, it works.  Sometimes this isn't "."  Maybe when I uninstall and then wait three hours, that I can have sound, once again. OS: Windows 7home premium.

  The first step, you can do is, right, click on the "speaker" icon and click on the sound problems. Windows will check and provide a solution.

  If this isn't the case, it may be a problem with the Windows Audio service. Restore power and startup should solve the problem. Go to start-> type services.msc-> press on enter. Locate the Windows Audioservice. Double click-> click Stop and then click Start. Check it out now.
  Even in this case, if the problem persists, try to update/reinstall audio drivers such as suggested by H.A.V Aravinda.

• Headphones not detected, but playing the speaker and headphones.

  I have a hp laptop Pavilion g6-2231tx with windows 8. My speaker works fine, but every time I plug in my headset it detects not she but the audio comes from speaker and headphone.

  I have already uninstall the driver and re-installed but it does not work for me.

  I'd appreciate really any notice about it.

  I have to return my laptop to hp (still under warranty). HP said is it a hardware problem and replace equipment.

  It's corrected now.

• HP Pavilion model DV6 key volume, mute the speaker and wireless no longer works

  As by subject heading, I am unable to use the control keys to change the volume, cut the speakers etc. I was not able to find a way to restore these functions. Does anyone have the answer?

  See you soon

  @alwend

  Hello

  Do a hard reset:

  1 disconnect all devices and remove all USB devices and multimedia cards.
  2 disconnect the power adapter, remove the battery and then press in and hold the button for at least 1 minute.
  3 reconnect the power adapter (do not connect the battery), press the power button and check is your problem is resolved or not.

• Sound comes through the speaker and headphones at the same time

  Why is the sound that passes through the speakers and the headphones simutaneouly?

  Hi MariaDuncan

   

  Are the headphones connected correctly?

  I suggest you refer to the link below and use the provided troubleshooting utility. Check if it lists and solves the problems-

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  I hope this helps.

• I want to delete an unused account (NOT the "Local"), and his file that accompanies it.

  Time of this account, and I don't use it again. Whenever I connect to Thunderbird, I was entering a password for it. Do I have to delete the account through my e-mail provider (earthlink.net)?

  InThunderbird:

  • Move all e-mail messages, you want to keep records of accounts to "local folders".
  • Switch to offline mode.
  • Open the account settings.
  • Mark the account you want to get rid of.
  • At the bottom of the account pane there is a button shares account
  • Make sure you have just marked account then delete account

  Only reason to open this account on server would be to clean.

• Since the last 'upgrade' my iPad does not connect to my Bluetooth from Sony speakers.  I restarted everything.  I have not matched the speaker, and then paired again, nothing. The iPad said they are connected, but not sound and the machine keeps spinning.

  My iPad mini links is no longer in my Bluetooth from Sony speakers since the last 'upgrade' to iOS.  I rebooted the iPad.  I unpaired and repair the speakers.  Showes Bluetooth as connected but the train continues spinning saying: it is always looking for devices even though it says it has paired with speakers.   Any suggestions?  and Yes, the volume is rising.

  Tap settings > general > reset > reset all settings and restart your iPad then re "pair" speakers.

• TREE - in any case to enter the prior and his prior ID?

  Hi, I have a tree view.
  I have branches that may be outside over a trunk.
  If I click on a branch, I also want to know what is its parent and its parent company (unless it is already at the top)
  If I click on the person that I want to know the Budget, which is the same, but also costs report 13
  
  One trunk
  -Report of expenditure 13
  -Budget
  -The person < = click
  Two trunk
  -Report of expenditure 24
  -Budget
  -The person
  
  Then in the SQL, I thought of prior analytical function but I need 2 levels... and we can use that in a SQL tree?

  Hello

  PRIOR can only put back one level.
  If the grandparent is unique, you can extract it SYS_CONNECT_BY_PATH results, using REGEXP_SUBSTR.
  If this isn't the case, you may need to do a Query of Yo-Yo , you two CONNECT BY queries, in opposite directions.

  I know that this answer is vague. For a more specific answer, post a small example data (CREATE TABLE and INSERT statements), or expression of the question in terms of scott.emp or hr.employees.
  Whatever it is, according to the results you want on the sample data and explain how you get these results from these data.

• Problem blackBerry Smartphones: keeps the switch between the headset and speaker

  Hey guys, I'm new here so I will try to provide everything I can. I have a Bold 9700 with ATT and the OS is v5.0.0.405. Well a couple of weeks my blackberry has started to develop an annoying problem. When in a call, most of the time (not all) he starts switching between icon of headset and normal speaker. When this happens, you can hear the phone switch between the two through the speaker, and it makes it so I can't hear someone and they don't hear me. I'm out of my warranty of 30 days of ATT, but I think im still well within the warranty of the RIM. I admittidly dropped, but this should not happen. Nothing like this has happened to any other phone I've owned. Is this what can I do to get some sort of replacement?

  Thank you!

  shigity wrote:

  Is this what can I do to get some sort of replacement?

  Thank you!

  All services, warranty or otherwise, is provided by your operator and will be carried out in accordance with the contract you signed with them. Go see them.

• Satellite A350-how to disable the speaker internal while external speaker jack

  Hi all

  Anyone knows how I can cut the House speaker while connecting to the external speaker?
  I want to use my laptop in libuary, but when I plug in the headphones, the speaker still his, when I put in muted, the speaker and the headphones the two silent.
  How can I configure the silent speaker, while external speakers can only keep silent?

  > Knowledge how can I mute the speaker internal while connecting to the external speaker?

  I guess you have a Realtek sound card and Realtek HD audio Manager should appear in Control Panel.

  Please check this Realtek HD audio Manager.
  The speakers on the right tab, you will see the options analog & digital.
  Right click one of the option and check if you could see a few options that provide a framework in order to mute the speakers.

  You will also see the option called: the advantage of the device settings.
  Check this box too.

  PS; my laptop automatically the internal speakers if the headphones have been connected.
  I read in other threads that update the audio driver might help too, but first test the settings as mentioned above.

• Windows Firewall does not start I tried many routes to solve this problem, anyone know how to help I did a lot of different types of suggestions that I read on the net, and I'm still having no luck. Please can someone help?

  Anyway I recently installed a Kaspersky Internet Security2010 trail version, I run Windows Vista, my computer is new, I know that there are no viruses, malware or spyware. However, I have this error code 6801, and I can not turn on the windows firewall. This started after I removed the version Kaspersky track. He also tells me that the associated program does not want to start "Yes or no" of course I tried yes then received this error 6801. I goggled the error and tried different ways to fix this error but still no luck. I'm a bit about computers, I checked the services and his here said automatic but not started. Tried again to start manually and this time it is said ' cannot start Firewall Win, if it comes to a product non-windows then contact suppliers and relay the error 6801.» So please if someone knows something I can do to solve this problem I do not have the disk to reboot vista and I'm losing my mind, I was in it for five days and his crazy wife. Another reason, I would like to correct this problem is I can not use my bitcomet torrent Downloader, I think that this problem of firewall is the problem because everything was going well until the Kaspersky was installed and then my router accidentally disconnected. Sorry for the hike, I'm very frustrated. Just for you all also say that I tried to port forward, with and without static ip and now I think I need to do something about this error until I can fix my bitcomet. I hope that someone takes the time to read this and respond, thanks hope someone soon!

  Visit the kasperersky site... they have the solution you need... Read it yesterday...

• Volume display shows options for the speakers and headphones

  Whenever I click on the window of the volume in the corner, it shows two sliders, one for my speakers and one for my helmet. This wouldn't be a problem if my headset work now. I plugged them (brand new, by the way) and his memory to come through the speakers. I went through the troubleshooting, searched this forum very and discovered that my headphones are the communications device by default and not to the default device. I've been trying to put my headphones by default, but it wouldn't let me, doing nothing when I clicked "Set as default". I tried to turn off my speakers, which almost worked if it wasn't the fact that now almost all the sound elements was not present at all.

  If someone could tell me how to solve this problem, or what I am doing wrong, please do so as soon as possible.

  Try the forums on the web site of the mfg of your machine, or a form by its IDT.