Statistics in tiara
Hi all
I have a problem with statistics and, respectively, histogram generation of a data set
Below you can see how looks like my data channels.
DIAdem notice I have->
Name | CH1 Dev1. CH2 Dev1. Ch3 Dev1. CH1 Dev2. CH2 Dev2. Ch3 Dev2. CH1 Dev3 | CH2 Dev3 | Dev3 CH3 | Number | 1. 2 |3 |4 |5 |6 |7 |8 |9 | Length | 3. 3 |3 |3 |3 |3 |3 |3 |3 | Unit | V | V | V | V | V | V | V | V | V | Content channels 1 | 1.52 | 1.51 | 1.53 | 1.52 | 1.55 | 1.51 | 1.50 | 1.53 | 1.55 | 2 | 1.62 | 1.61 | 1.63 | 1.62 | 1.65 | 1.60 | 1.62 | 1.67. 1.65 | 3 | 1.52 | 1.51 | 1.53 | 1.52 | 1.55 | 1.51 | 1.50 | 1.53 | 1.55 | What I need is to create a histogram for a given line-> in this case number 2 It is this right before or should I make a few adjustments before that? I hope my question is clear and easy to follow. Thanks in advance to anyone who can offer you a working solution. Hello You can do this in a scipt. Erase the dataportal, load the file attached .tdm and run the following script: I have Sun Then all the unique values of the 3 channels will be copied to the result string. Tags: NI Software mathematical calculation in script on each element of the array. Hi all I am trying to write the VB script in which I want to do different mathematical operation on each element of channel-specific data. For example, for each element I want to find the next two index given way and both before and after publication of the results on the basis, then it is more calculating. It will be very useful if someone can guide me in the execution of operation on the elements in the array inside the script of tiara, that we can do in labview using indexes in the table. There are built-in math and statistics in tiara tab analysis tool. But I want to design for my custom mathematical operation. Thnks HS Hi HS, Here is a version 10.2 tiara from what I understand ask you: Window = 2 Denom = 2 * window + 1 Threshold = 10 Chnum = CNo("[1]/Speed") FOR i = 1 + ChnLength (Chnum) window - window Sum = 0 FOR j = i - window to i + window Sum = sum + ChDX (j, Chnum) NEXT ' j Ave = sum/Denom IF Ave > threshold CAN ' do action of contingent END IF NEXT ' I Brad Turpin With the help of tiara, how to get the slope of a signal (linear or nonlinear) Speed of rise or precipitation rate and the temperature of the signal, I am trying to sign up the slope in my report using DIAdem, I could not find, is there a function of slope? or a way to do Thank you Na'amat salvation, You can get the calculation of the slope to climb the built-in "ANALYSIS > Curve Fitting > calculate regression." If you want to adjust only a subset of the data, you will need to extract this subset of data to a new data channel, and then initiate the calculation of reconciliation on the new channel. Here is a script I created to do the calculation of extraction and statistics/slope range automatically. Brad Turpin Tiara Product Support Engineer National Instruments All of a sudden, I can't print an information page - the statistics of my site. I have a personal Web page hosted by IPage - lynnesgenealogy.com. I get monthly statistics of visitor on this page. For the last two months, I got a terribly large number of hits (over 20,000) on my site of Asia (more trace of China and the Japan IP addresses, but not all). During the outbreak of this issue with IPage I discovered I can print is more statistics page, as I have in the past. I deleted all cookies, cache, history, etc., etc. In Explorer, I can only print one page (the report is several pages long) at a time - but in Firefox I get a blank page. What's the story? "This frame" doesn't appear in the menu when the page you are clicking on a framed page. So you won't see it most of the time. There are two types of framed pages: HP 10BII + statistics PN questions? After getting weird with the HP 10BII PN + statistics (unexpected) results, I dug out some old books with sample data and checked I get different results on the 10BII + on other machines. Examples of data of HP - 34 c Manual (p. 38): x / y: 696/1945, 994/1950, 1330/1955, 1512, 1960, 1965-1750, 2162/1970, 2243/1971, 2382/1972, 2482/1973. I enter all 9 data and even on the 10BII +, I check the linear regression and then use: RS-5, RS - K (Swap) to get the slope, m - HP 10BII + returns 0.01612 [should be 61.1612] RS-6, RS - K (Swap) to get the y originally b - HP 10BII + return 1934.1695 [should be-118, 290.6295] Maybe I'm missing something basic, but the 10BII + gives the answers that appear all just bad. I checked the "should be" translated on a HP - 34 c, WP 34s and HP - 15 c and they agree. I read (and reread) the 10BII User Guide + to ensure the correct keystrokes, and also made C.ALL to ensure no conflict of memory (e.g. too many CFlows, etc.). Curiously, linear estimates appear to be OK when I interpolate w/samples. What happens to Tim? but here's an interesting result... If the order of the columns is changed (x and y values are reversed)... X Y Now run a linear regression model... and the result is... '(-118242.173643) +(61.1364341085*X)' the issue seems to be the way in which data is entered into the calculator... HG 48GX Calculator: transfer of programs from a using Terminal Server hp48GX calculator statistics I'm transferring programs from statistics to my Calculator an old computer with Windows Xp hp 48GX using Kermit emulation software. I see that the calculator seeks to receive, but I can't understand how you select the files that I want to transfer from the computer to the calculator. Anyone who is familiar with Kermit is and can scroll me through how to get transferred to the calculator software pro stats. Any help would be greatly appreciated. Thank you Math-A-Noid Hi!, Math-a-noid: Please indicate what is this, the library of statistics you need transfer to HP48GX, to indicate the step to download and stay permanently, in memory. Tecra A5 supports the applications of GIS and mathematics/statistics? one last thing, Tecra A5 can support GIS applications and mathematics/statistics? Hello I put t know why the GIS and statistical math should t working on Tecra unit. How to view the monthly/annual statistics in terms of time past/calories burned, broken down by each individual activity such as run elliptical/outside etc. Y at - it a third party application that can help me to collect and display these data? Hello It is not currently possible to review the data the application integrated in activity or training on this basis. If you want Apple to consider adding this feature, you can suggest here: https://www.Apple.com/feedback/watch.html However, health and fitness data from other sources, iPhone, and Apple Watch are registered and grouped within the health on iPhone app. These data can be exported, which you may find useful to track the cumulative progress and/or analyze your activity more in detail. IPhone app activity also has a button for sharing (top right of the screen) that allows to share data - including social media, Messages, Mail, Notes, and a printer. Include third-party applications that can be useful, for example: Access to QS -"Access your HealthKit data in a table so you can Explorer using numbers, Excel, R, or any other tool compatible CSV." - https://itunes.apple.com/gb/app/qs-access/id920297614?mt=8 SpectaRun workouts -"View from the workouts of your Apple Watch on your iPhone and to export these workouts so you can download them to your favorite online running community." - https://itunes.apple.com/gb/app/spectarun-workouts/id991723862?mt=8 Data can also be exported directly from the application of the health (Health Data > All - Share at the top button on the right). Check the descriptions and support resources for third party applications for supported details of import and data analysis features. More information: Use the activity on your Apple Watch - Apple Support Hello Just a general question about the tiara. Can DIAdem fast fourier transformation, smoothing of curves, differentiation and integration of graphics? What are the features of DIAdem compared to other graphics packages? Thank you. The CORRECTION of OFFSET feature that should do it for you: In the Panel ANALYSIS, take the first library called 'Functions of channel' - offset Correction The dialog box that opens, you should get where you need to be... Otmar Tiara of exit without displaying message to save c# Hello So I wrote a c# program that uses the tiara to extract data from a file. It works great with help I asked a few days ago, but I'm looking for a change to make the program even easier use. I use TOCommand oDIAdem = new TOCommand (); to control the tiara in my c# program that works very well, but I hope that there is a way to remove the output dialog box that appears when the program ends. I've attached a screenshot of the output dialog box that appears. It is not a huge problem, but I would like to make the simplest possible program for the person using it. Any help is greatly appreciated. Thank you! should be an easy fix. It erases just the portal. Export to a CSV of tiara does not produce a CSV file! Seems strange but exporting to a CSV of tiara does not a CSV file. Tiara produces a tab delimited file, which is obviously not a CSV file. Tiara aid said even the 'CSV' file is a tab-delimited. The software expects a comma as delimiter does not read the file properly created tiara. It is possible to specify the correct delimiter? You can ask the decimal/separator, you need if you start exporting CSV from a script Call DataFileSave (" See also http://forums.ni.com/ni/board/message?board.id=60&message.id=8851&query.id=146775#M8851 Tiara 2015 fails to start (Win 7) Whenever I try to start DIAdem 2015 on my Windows 7 computer, I get the error ' tiara: DIAdem.exe - Entry Point not found ". Here is a picture of the screen of the error. I tried to reinstall both camps tiara but get the same error. (I also tiara 2012 on my PC and it worked fine before, now who is also giving the same error). Also DataFinder.exe doesn't and fails with the same error. One of the messages said to reinstall OR ICU from the DVD DIAdem will correct this problem. I found NEITHER-ICU Version 15 on the DVD and tried to install it, but the installer would not install 15 NOR-ICU and says that it cannot install because a newer version is already installed. I can't find OR ICU under control panel > programs and features >, so I can't uninstall the ICU-OR corrupt that is probably causing all these errors. Can you please help? Thank you. Hello RagMan, I agree that the ICU is probably damaged. It seems that you have a mixture of old and current ICU binary on your hard drive, which causes this error. It's very special and I like to discuss possible solutions with you - of course, I'll post the result here. Please post here your e-mail address so I can contact you. Thank you, Dieter National Instruments Engineering GmbH & Co. KG 2D axis graduation Bug in reports (Tiara 2014) Hello I ran across a rarther annoying bug in 2D for reports of scale axis. Here's how to recreate: After you click Cancel, the scale of the axis 2D completely changes. I think what is happening is that the tiara takes everything the previous issue of 'End' was and who uses instead the number of 'End' you want. In addition, you have not actually to enter the curve and the definition of the axis to create this bug. Press cancel if you change something like text (for example)... curious bye bye. Also, if I go back the and redefine scaling on automatic mode, click Preview to update the plot, then opt for the manual mode, all seems good. However, if I copy Sheet2, the plot on Sheet2_Copy1 is messed up the same way as if Sheet2 is OK, but I hit Cancel. Worse still, the undo function does not work on this unwanted change of scale. This is a bug that makes plots in the report almost unusable files. I hope it's re-producable on other systems if a patch can be issued. Let me know what you find. The only solution I found is to click OK instead of cancel, which is not always preferred. Thank you Jacob Hello jrasco,. You are right. There is a bug in DIAdem 2014. We have set for the DIAdem service pack. Here is the link to the 2014 DIAdem English SP1 Thank you Walter Hello I use DIAdem 2011 SP1. I have a chart with a curve as "filled area. The parameters of the curve of the backfilled area are: Line color: Blue ... Color fill: Blue Transparency: 90% Transparency is necessary, otherwise the grid is hidden by the area filled in the diagram. Tiara shows the report correctly, but in the file exported PDF zone is in blue with no transparency. (The area was backfilled black in the file PDF if DIAdem 2010 is used.) (The report is printed correctly directly from tiara). If anyone can help with this? Hi Johann,. The PDF driver that installs with DIAdem does not support transparency. However, starting with DIAdem 2011 you congifure REPORT to restore each sheet as a PNG image in high definition and send those PDF driver rather than the gross REPORT screens. Select the settings menu > Options > REPORT... and then check the box 'print output as image data. Brad Turpin Tiara Product Support Engineer National Instruments HI, I use Labview and tiara to test and grind outages of a complex engine system where I want to put the engine 3D model in a screen and highlight or annotate instructs the operator for failure and repair. How should I do for the optimal design of these 2 products? Hi id,. Look at exercise 7 in the following exercises of Hands-on tiara (older). I dropped this exercise in future versions, but the process has not changed since then. in the event that the link above does not work, here is the General web page: http://zone.NI.com/DevZone/CDA/EPD/p/ID/5393 Brad Turpin Tiara Product Support Engineer National Instruments I have to pay on a monthly basis this amount or once the time? IF I pay €0.99 for 50 GB I pay each month this amount or once? Can I add a drop-down list for the bookmarks toolbar? I would like to have a series of categories of bookmarks in the bookmarks toolbar. Let's say a button called "Household" could have a menu drop down menu links to my sites popular for "Home repair," 'Kitchen', 'Furniture finish', etc. And maybe anoth How to remove a stuck in my mac icon I have delte the app in the folder/Applications. But whatever I do with the icon in the dock, he do not respond. I can click on the Remove option, but it does not. I also tried appstore. He says that the app is installed. And I clicked on open, it ju How can I keep the bar of menus in internet explore 9 open by default? How can I keep the bar of menus in internet explore 9 open by default? Impossible to select the time range in dropdown menu-foglight PASS UI. Hello I'm new to foglight and is having a little problem with the user interface. I doubt if I'm in the right place to ask this question. I use Foglight for SQL Server 7.0 v. Under UI, there is a drop down for the time interval, which, in my view, do
Dial the ChnAlloc ("Result", 3, 1, DataTypeFloat64, "Numeric")
for i = 1 to 3
CHD (i, "result") = CHD(1,i)
NextSimilar Questions
Tiara Product Support Engineer
National Instruments
[[1945 696.]
[1950 994.]
[1955 1330.]
[1960 1512.]
[1750 1965.]
[2162 1970.]
[1971 2243.]
[1972 2382.]
[1973 2482.]]
The unit has a particular characteristic or a sets of equipment to run this application?
The Tecra A5 is a very nice laptop. You can upgrade the memory for max 2048 MB.
It was also delivered with different graphics cards and different processors.oDIAdem.CmdExecuteSync ("datadelall (1)")
Maybe you are looking for
