Stature I9: connecting to vista?

Similar Questions

• Error R6025 Runtime after connect you Vista - card Flash memory does not

  Hello
  I am a newbie & would appreciate any advice.

  I get a runtime R6025 error message when I connect Windows Vista.
  When I click out of the box, then I get a message saying Toshiba Flash Cards not working do not.

  I cancel that and my laptop is ok except that I don't know if the flashcard works or not because I don't know what he does.

  Sorry if I seem thick

  Thank you

  Neelie

  Hello Neelie

  Without much explanation here, in my opinion, you can try to resolve this problem if you remove the package of added value of the system (Control Panel > programs and features), restart your computer and install the latest version available on the Toshiba support page.

  You can find it under http://eu.computers.toshiba-europe.com > support & downloads.

• How do the PPPOE connection automatic connection on Vista

  Hello!

  I have the internet connection for PPPOE. It works fine, but I want to autoconnect when I start my PC.
  I tried to create a network connections shortcut and copy it to all the programs/startup.
  It did not work.

  Thank you!

  OK, try this. Open the Control Panel and select Internet Options > connections . Make sure your PPPoE connection is highlighted and always set the default connection is checked. This assumes that your PPPoE connection is your default value.

  See also the answer to a similar question for quite awhile in time...

  http://Forum.Soft32.com/Windows/auto-connection-Windows-Vista-log-ftopict376533.html

  Good luck... MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

• Connect home Vista & Windows XP Media to the network... Help!

  What are the steps? I keep getting blocked and the message says to contact administrators, but it's us! What I am doing wrong?

  See the following thread that offers some good advice on how to set up:http://forums.techguy.org/networking/545552-how-do-i-network-my.html.

  Here is a generic Microsoft article on how to set up a home network: http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is another article on the connection of Vista and XP together: http://www.informit.com/articles/article.aspx?p=1165037.

  Here's a last article on how to set up a network that covers the XP and Vista together among other options:http://www.practicallynetworked.com/sharing/vista/Vista_network_options.shtml.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can not connect to Vista - connection failed user profile Service

  System message: user profile Service service has no connection

  User profile cannot be loaded.

  Help, please!

  Thank you very much

  Foam HB

  original message: can not connect to Vista

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• How to bypass the automatic connection in Vista. The SHIFT key after that logging does not work.

  I'll put up a laboratory of small kiosk for my students with a minimum account privs.  Sometimes I need to login with the administrator account to perform regular maintenance or solve a problem.  in xp, all I had to do was hold down the SHIFT key before the blue startup screen and all accounts (including my admin account) were visible.  This doesn't seem to work with vista.  is there a secret combo of keyboard shortcuts?  What should I do to ensure that both accounts visible?

  Hi Scentfromabove,

  Follow this step in order to bypass the automatic connection in vista.

  1. Click Start and type netplwiz in the start search box and press ENTER.
  2. check the users must enter a user name and password to use this computer
  3. click on apply and OK.

  I hope this helps.

  Bindu S - Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Hi, I have a camcorder Sony TRV 356 I am unable to connect on vista or windows 7 via USB

  Hi, I have a camcorder Sony TRV 356 I am unable to connect on vista or windows 7 via USB

  Hello Sajid,

  The community here is about the countries United States, Canada and Asia-Pacific. Your DCR-TRV356E model is a model British camcorder.

  However, to answer your question,.

  The DCR-TRV356E USB streaming function is not compatible with the operating system Windows Vista and Windows 7. You can connect the camcorder to the computer using the A / V cable connection or using an i.Link cable.

  You can visit the European Forums of suggestions regarding the transfer of videos to Windows Vista or Windows 7 computer.

  http://www.Sony.co.UK/discussions/community/en/support/cameras_and_camcorders

  If my post answered your question, please mark it as an "accepted Solution".

  Thank you for your message.

• Satellite A100-906: slow internet connection with Vista

  Hello world...

  I installed vista ultimate and I must say it's great... the problem is that the connection to the network is so slow... on xp, I used to get speeds up to 4.5 kb on my connection dial-up... on vista, I almost reach 1.5 KB... can someone tell me what is the problem and how can I solve this problem...

  Maybe your TCP settings are not correct? Try searching on google for some tools that configure your tcp and internet settings correctly, then maybe you can solve it this way.
  BTW, I Don t think this is a related thing of material...

  Welcome them

  P.S.: Reinstall the drivers sometimes helps...

• Satellite P100-434: wireless connection with Vista problem

  Just bought this laptop with Vista and so far could not get the wireless to connect, I have 3 other computers and they will all connect, I have reset the router and set up new accounts on other computers without problem, but unable to do it on the P100.

  I tried the new RADAR feature and will not pick up all the networks, but by trying to establish a new connection it shows that a wireless network is available but it is nameless, although my network is named, I took the passkey of the network so that it is open but still does not connect, LAN via ethernet fine work.

  Wireless switch is on, but when I drag off switching wireless says WE

  Hello

  I can't give you an exactly the answer why you cannot connect to your WLan with Vista because there are so many options that should be checked.
  But I think that you will find the solution yourself with a little help from the Microsoft Web site.

  Please see this site:
  Connect to a network with Windows Vista wireless
  http://www.Microsoft.com/technet/community/columns/cableguy/cg0406.mspx

  You will find many useful tips, screenshots and Tips how to connect to WiFi with Vista.

  Please post again if you have found the key

• XP Remote Desktop can only connect to Vista once by restarting: error 0xc00002fd

  I am running XP SP3 and by connecting to a computer running Windows Vista by using RDP 6.1 (also tried 7.0) with NLA.  I did the configuration of the registry for SINGLE sign-on (although it reproduced without these registry entries with new credentials).  The first logon works perfectly.  That I disconnect the Vista machine.  Then the second connection comes with "an authentication error has occurred (0xc00002fd)."  I can never get another connection to work.  I reboot XP and it works again, once.  The error seems to be a sort of encryption problem.  If CredSSP is cached something that does not work?  Any help is greatly appreciated!

  Hi Brändli,

  • Is Windows Vista computer on a domain network?

  This error may occur sometimes if Credential Security Support Provider (CredSSP) is not correctly enabled. You can access the link below and follow the steps described in the article turn on CredSSP.

  http://support.Microsoft.com/kb/951608/en-us?p=1

  If the problem persists after you follow the steps described in the article above, you can access the link below and post your question in the theTechNet community, which will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/VirtualMachineManager/threads

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can't connect to vista basic as forgotten to manage the password if a default value for the factory would solve this?

  Top of tower which is emachines D620.

  If the default do a clean computer as factory new, and which is the vista windows always on top of the Tower? Then I do it again? But of course, take note of any password provided.

  Hello

  Reinstall the problem and recommend Microsoft;

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7

  ____________________________

  If you ever have a disc to buy, there should be a recovery image on the hard drive Partition reinstall Vista back to the factory (new condition)

  eMachines: press left Alt + F10 at startup to start the restoring to factory settings (new State).

  http://Techchannel.RadioShack.com/eMachines-system-recovery-1747.html

  ____________________________

  If you have forgotten your password, you cannot connect to backup your files.

  And how to back up your data before reinstalling, if you wish.

  Saving your files:

  You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

  Or, you can download Knoppix > make a bootdisk to > start your system with it (IF your material is all work) > and copy your data from the hard drive like that.

  http://Knoppix.NET/

  See you soon.

• WPSM54G V1.1 - Cannot print without you connect manually - Vista

  Have just set up printing with a Samsung SCX4200 MFP print server. Took a little time unistalling and reinstalling the printer drivers to operate, allowing the computer to download the latest driver for Microsoft Vista was the cure. Anyway thought I got it working, test page printed during installation but etc...

  Now when I try to print any documents I have to manually connect to the printer by clicking on the icon of the client. I guess that's not how it is supposed to work! I tried selecting "print directly to the printer" as was proposed and also tried to remove the TCP/IP port that was also proposed for a connection problem, but it won't let me delete the ports (perhaps for good reason!).

  If someone has an idea of what I can try to solve this problem?

  Sorry - should add that I tried to turn the auto-dissconnet which doesn't seem to work or make a difference. Don't have the always-connected computer prevents any other computer on the network to print?

  Well................. I don't know how, but everything works now. Just power off, then on the print server, then the router, ran the diagnostic program who wanted to install the 'new' driver, I let him do this, and now everything seems to work very well :-)

• Unable to connect to Vista Home Premium DMA2200

  I recently had the need to re - install my HTPC (Vista Home Premium). When I went to set up my DMA2200, it gets to the point in VMC, where there a checkbox in 'Setting media locations', and he is reportedly trying to connect to the DMA2200 ("connecting to Extender").

  At this point, it takes much more long as it should and VMC possibly errors with the message "Extender didn't connect." On the DMA2200, I see "Login failed."

  Looking at the Log on the HTPC case, I see five entries in the Media Center newspaper during the time that I was trying to match my DMA2200 + HTPC (oldest to newest):

  1. HTPC beginning of the installation of Windows Media Center Extender with the following options: Firewall (0,0,1,1) Power management (0) media settings (1)

  2. The installer of Windows Media Center Extender configured successfully, the Windows Media Center PC for use with an Extender.

  3. Windows Media Center Extender DMA2200us (sditz5ep3yi0) 'uuid:689C2DE0-4282-48BA-BF44-9C56E2176767' found at the address 192.168.1.135.

  4. Windows Media Center Extender Setup has exchanged certificates with device 'uuid:689C2DE0-4282-48BA-BF44-9C56E2176767'.

  5. Windows Media Center Extender account Mcx1 was created for device 'uuid:689C2DE0-4282-48BA-BF44-9C56E2176767'.

  As far as I know, everything looks great. In addition, I am able to desktop remotely for my HTPC and ping my DMA2200. I have not either a complicated network. Just my HTPC, a Linksys router base with the default configuration and the DMA2200. I have the firewall running on my HTPC, but I allowed the Extender pass. I also tried to stop the firewall, but it did not help. I reinstalled Vista and reset the DMA2200 to default settings. Same question.

  The only thing at this point that I can think of who can help is when I got my DMA2200, I remember that it came with an installation disk (someone check?) and I used it. I am no longer able to find such a disc, nor I see any kind of tools package available for download.

  Does anyone have any ideas where I should go next? I'm almost ready to return this as a defective unit.

  This eventually be due to a change in registry/dll to enable RDP on Home Premium. I forgot it was on an image I found a new installation. After having finally dig my Vista disk and reinstall the old fashioned way w / nothing else Vista & drivers, the problem has been resolved and has not recurred.

• I can not connect computer vista laptop to my network home, but I can connect to other networks. Other computers can connect to my home network very well. This can be corrected?

  My laptop runs Vista and I've not had problems connecting to my home network wireless until a week ago or not.  Then, trying to connect, I see other available networks, but not my own.  When I try to connect manually, it says that the network already exists.  Other computers, macbooks, are able to connect to my home network without problem.  I am able to connect to a network on my laptop fine unsecured wireless.

  I could 'solve' the problem or get reconnected with a restoration of the system to an earlier date, but it only lasts a day or two.  I searched for another fix and tried many things, including to reset the router, remove my network, and then reinstall, etc, but can't seem to get this to work as if it were - automatic connection as the first network.

  Any help would be appreciated.  Thank you.

  You have rebooted the router and the pc at the same time?

  You run the IPCONFIG / all from a cmd prompt can and download a preview of the output to a file share services like rapidshare and put a link to it in your next post?

• wireless connection problems vista adapter usb wireless 802.11 b/g #2

  my HP pc used to connect to my internal wireless, no problem. I know the wep key and had several hours of navigation...
  I move for a year, come back. apparently my PC doesn't connect now... in fact, it won't even connect with a CABLE!
  He repeats to me ' identify with. "
  Well, Vista has been updated since and I've been usng a mobile dongle (at GREAT expense!) to try to update, but now I'm sick of the cost and I need internet access appropriate again!

  Thank you for responding Srinivas
  I don't know the model but it is a HP, three or four years now.
  I had all sorts of messages of "not able to connect" and limmited conectiviy... I'm sure I had a relative at all simply have no connection
  the browser, I would have used that I had connected would be Firefox, but it has yet to get to the point that I was getting nothing. bytes sent might be higher than anything but received nill.
  at the time, I was unable to get ANY connection NET... for all intensive purposes, I've been totally disconnected

  I had tried everything that arises, each suggestion had windows, but it made no difference... even a connection WIRED sitting to 'authenticate '.

  Odly enough, who are seeking to solve a problem with my scandisk is not not be able to access C drive I have run "services.msc".
  looking through everything that might stop the player access, I found that the DHCP Client does not work... I made sure it runs automatically and (because I checked my settings of a few hundred times) the network came as a light!

  I don't know what turned it off because none of the programs I run affected before (I haven't installed any new programs since then be disconnected from the network)

  Thanks for the reply. I hope this information helps in similar cases in the future :)