Toshiba Stor.e partner 1 TB, clicking and does not

I've had my Toshiba Stor.e partner 1 TB external hard drive for only less than a year after going on holiday with her in my bag I go back and it does not work. Even when I plug in the USB 3.0 slot is all for that click.

Sometimes the computer recognizes it is connected with the noise but he then instantly disconnects again.

Any help will be greatly appreciated.

In my opinion, you should contact your local dealer and make a warranty claim.
On this virtual path, I can't say for sure if the HARD drive has a hardware problem but this clicking noise is very suspicious to me.

Tags: Toshiba

Similar Questions

  • Toshiba Stor.e ALU 2 s 3.5 "does not work with my XBOX

    Hi all, first timer here

    Just got a Toshiba external hard drive as a gift. Wanted one for a while, mainly to use with my XBOX 360 to watch movies and listen to music on. However the xbox does not pick up the hardrive (connected via USB), but he'll be looking for my friends generic hardrives. Anyone has any idea why?

    It looks like a fairly recent model, here are the specs in the (very rare) manual that came with the hard drive:

    Toshiba stor.e 2 s 3.5 ALU "
    1 TB
    USB 3.0
    Backward compatible with USB 2.0 (I don't know what that means "backward" here)

    I'm not a computer person. I use the laptop to surf the web, media, applications etc, basic College work. Few of my friends have external hard drives, mainly cheap generic brands of the average and all work fine on my XBOX, just plug-and-play.

    If anyone has any advice on how to do it, or even where to go woth my question I would really appreciate it.

    TIA
    Creamy

    Hello

    In my view Backward compatible means that you can use this HARD drive with USB 2.0 ports. But the fact is that USB 3.0 port provide 900mA and USB 2.0 only 500mA.
    I guess that's your HARD drive
    http://www.Toshiba-multimedia.com/en/store-externe-Festplatten/ALU2-s-35/
    According to specifications, you can find info that this HARD drive should 900mA

    Therefore connect the HARD drive to two USB 2.0 ports using a USB Y cable.
    I think this will help you.

  • Address bar of bar, toolbar, menu, navigation bar are missing, and click right does not either.

    I came across this weird problem in my browser where none of these navigation options is visible. No Menu, no tabs, nothing no address bar. I can just google something and you click on the links. Make a right-click even does not work anywhere.
    I'm uploading the screenshot here.

    Try to open a new window (Ctrl + N) in the case where you have opened a pop-up window via JavaScript on a web page that has hidden toolbars.

    If this does not work then try to delete the sessionstore.js file in the closed Firefox with Firefox profile folder.

    You can use this button to go to the Firefox profile folder currently in use:

  • After I 'google' a web site address, I am unable to access the page directly by clicking on the link in the address; the page hangs and does not respond.

    After I 'google' a web site address, I am unable to access the page directly by clicking on the link in the address; the page hangs and does not respond.

    What antivirus you have installed before? Is the virus/malware-free system? If you have a current antivirus installed and you went through at least some of the malware removal steps I list in the link I have given if you are sure that the system is clean, uninstall McAfee and see if that solves your problem. If you connect to the Internet behind a router, you can be sure for this quick test. If you are connected directly to a cable/dsl modem, then firstly download Avast or even Microsoft Security Essentials (both free). Then, disconnect from the Internet and uninstall McAfee. Install the antivirus of your choice and test. If all goes well, your problems have been caused by McAfee. This is not surprising since McAfee is perhaps the worst choice for safety, we could do.

    If you had any antivirus installed before McAfee, then you must go through all stages of thorough removal of malware listed in the my link before anything else. MS - MVP - Elephant Boy computers - don't panic!

  • I have problems with the shopify widget in Muse. I have configured my shopify store, but when I placed the button 'buy' is didn't tell the product no availabe longer and does not appear when I'm writing the site.

    I have problems with the shopify widget in Muse. I have configured my shopify store, but when I placed the button 'buy' is didn't tell the product no availabe longer and does not appear when I'm writing the site.

    Please contact the original publisher of the widget.

    Thank you

    Sanjit

  • Hanging Windows desktop and does not, online or off the power. I have to use the task mgr constantly to "shake" the windows to startin

    Original title: Hello I have an xp pro sp3 dell dimension 2400. Hanging of Windows desktop and does not, online and off.

    Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

    I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

    I have xp of the process and have nothing wrong.

    Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

    Any suggestions would be greatly appreciated.

    Thank you! :>)

    Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

    I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

    I have xp of the process and have nothing wrong.

    Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

    Any suggestions would be greatly appreciated.

    Thank you! :>)

    The image (it back up to an external drive as full image) and reinstall Windows XP, update, drivers and everything.  Install any plugins that you NEED to do all that you see here that the bat hurt.  If the problem no longer exists, something has gone wrong with your system from before (corrupt files or your cleaning is not as complete as you think) and if the problem persists - probably something to do with the material. In all cases, you can return to the image if you wish.

    To the extent wherever it is the registry, I must ask, * how * you have come to this conclusion?  Not that I'm defending something - I was wondering what you did to decide who is not your registry database?  (Side: I agree with you.)

    That's what * I * would call cleaning and optimization of a Windows XP machine:

    Search for malware:

    Download, install, execute, update and perform analyses complete system with the two following applications:

    Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

    Search online with eSet Online Scanner.

    The less you have to run all the time, most things you want to run will perform:

    Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

    You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

    Do a house cleaning and the dust of this hard drive:

    You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

    Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

    If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
    http://www3.TELUS.NET/dandemar/spack.htm
    (Especially of interest here - #4)
    (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

    You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

    How to use disk cleanup
    http://support.Microsoft.com/kb/310312

    You can disable hibernation if it is enabled and you do not...

    When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

    -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
    -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
    -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

    You can control the amount of space your system restore can use...

    1. Click Start, right click my computer and then click Properties.
    2. click on the System Restore tab.
    3. highlight one of your readers (or C: If you only) and click on the button "settings".
    4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
    5. click on OK. Then click OK again.

    You can control the amount of space used may or may not temporary Internet files...

    Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

    -Open a copy of Microsoft Internet Explorer.
    -Select TOOLS - Internet Options.
    -On the general tab in the section 'Temporary Internet files', follow these steps:
    -Click on 'Delete the Cookies' (click OK)
    -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
    -Click OK.
    -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
    -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

    You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

    CCleaner (free!)
    http://www.CCleaner.com/
    (just disk cleanup - do not play with the part of the registry for the moment)

    Other ways to free up space...

    SequoiaView
    http://www.win.Tue.nl/SequoiaView/

    JDiskReport
    http://www.jgoodies.com/freeware/JDiskReport/index.html

    Those who can help you discover visually where all space is used. Then, you can determine what to do.

    After that - you want to check any physical errors and fix everything for efficient access"

    CHKDSK
    How to scan your disks for errors* will take time and a reboot.

    Defragment
    How to defragment your hard drives* will take time

    Cleaning the components of update on your Windows XP computer

    While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

    Download and run the MSRT tool manually:
    http://www.Microsoft.com/security/malwareremove/default.mspx
    (Ignore the details and download the tool to download and save to your desktop, run it.)

    Reset.

    Download/install the latest program Windows installation (for your operating system):
    (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
    (Download and save it to your desktop, run it.)

    Reset.

    and...

    Download the latest version of Windows Update (x 86) agent here:
    http://go.Microsoft.com/fwlink/?LinkId=91237
    ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

    Close all Internet Explorer Windows and other applications.

    AutoScan--> RUN and type:
    %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
    --> Click OK.

    (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

    Reset.

    Now reset your Windows with this FixIt components update:
    How to reset the Windows Update components?

    Reset.

    Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

    Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

    If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

  • Network type changes 'Public' and does not return to work when the default gateway is detected

    Original title: Type of network not restored on ethernet cable reconnect.

    I have a Dell Precision R5500 running Windows 7 Professional Service Pack 1. It is connected to a network that is stored as a type of 'work '. When the ethernet cable is removed and replaced network type changes to 'Public' and does not return to work when the default gateway is detected. I also have a Toshiba Tecra M10 running Window 7 Professional Service Pack 1 that initially detects the network restored as 'Public', but 'Work' once again Exchange is a connection to the default gateway. Is there a setting somewhere in the strength of the network to double check its type periodically?

    Hello

    You have any other network assets wireless (specifically) running on the computer?

    Have another active network connection could also cause this.

    Allows us to follow the methods mentioned below and see if they help.

    Method 1: Run the network troubleshooter.

    When the network type gets changed to 'Public' after the cable is disconnected and reconnected. The troubleshooter should let you know if there are errors with the associated services.

    See the following article:

    Using the troubleshooter from network in Windows 7:

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7


    Method 2:     check if network discovery and file sharing options are enabled in the network and sharing Center.

    See the following steps:

    a. click on start toreduce this top, type network and sharing Center in the Start Search box, and then click network and sharing Center in the programs list.

    b. If network discovery is off, click the arrow to expand the section, click turn on network discoveryand then click apply.

    Reduce this includes this imIf that you are prompted for an administrator password or for confirmation, type your password or click continue.

    c. If file sharing is off, click the arrow to expand the section, click turn on file sharingand then click apply.

    Collapse this includes this ima

    If you are prompted for an administrator password or for confirmation, type your password, or click continue.


    Method 3: Uninstall the network drivers and then install the last set of drivers on the manufacturer's Web site and check the issue.

    See the following steps:

    (a) click Start, right click on computer.

    (b) click on properties, click on Device Manager

    (c) expand the network adapter, right click on the adapter option

    (d) click on uninstall

    (e) now go to your computer / site Web of the manufacturer of the device, download the updated drivers and install them.

    Reference:

    Updated a hardware driver that is not working properly:

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  • My charger Apple Watch emits a ticking sound and does not load?

    The round magnetic disc at the end of my charging cable is a "ticking" or clicking sound which seems to be the rhythm of a clock. He has recently begun and did not charge the watch. I tried to connect the cable to the USB port on the MacBook Pro rather than on the wall, but still, he clicks on and does not load. Is my favorite charger?

    Hello

    I suggest you contact Apple Support (mail service may be available) or make a Genius Bar reservation in one goal of your Apple Watch and cable magnetic charge verified and, if recommended by Apple, repaired / replaced (whether under warranty, if it qualifies, or via the chargeable repair service):

    To check your warranty status (the serial number is on the back of your watch):

  • Click right does not work with Firefox, which may be the problem is Firefox or my computer?

    Click right does not work with Firefox, which may be the problem is Firefox or my computer?

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Satellite U305-S7432 freezes and does not sometimes using Win XP

    Hello.

    I have a portable Satellite U305-S7432.
    Initially, it came with Vista, but I reformatted with XP Pro. I have installed all updates up to service pack 3.

    My problem is that sometimes when I try to restart the computer, simply, it freezes and does not meet any entry. I noticed that this happens if I close and then open the cover (which means that the computer goes mode sleep entry and returns).

    Please note that the splash screen works perfectly well and the computer wakes from sleep fine but then when I try to restart, the computer will simply spend time instead of restart.

    If it goes into sleep mode, reboot takes place as planned.

    I installed all the drivers and there is no question mark in Device Manager. I've updated the latest chipset from Intel (for the mobile 965) driver as well. Finally, I also tried to add /forceresetreg my Boot.ini file (as suggested: http://support.microsoft.com/kb/822624) but nothing helps.

    Any ideas?

    It is a series of laptop computers Toshiba us and you should check the Toshiba driver page for available drivers:
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

    If you will not find XP drivers for this page, then you can try to install unique drivers for Sat U300 since European Toshiba page but I not quite sure if these drivers XP will work on you Sat U305 Mr. but it s worth a try!

    Good luck

  • IPad 2 Air battery drained and does not load after update 9.3

    Air iPad 2 (Wifi + cell) battery has completely evacuated and no charge since after update 9.3. Update my device was 100% of the fees. Subsequently, when the update was finished, the Unit continued to lose the load during use (I got the full enjoyment on the charge) and does not charge even on not trying to load intermittently and for long periods. Once the load is complete evacuated after considerable use, I was unable to see the unit after 2-3% fees.

    I have restored and updated the device via iTunes, but the problem persists, and I see a battery on the scree with 3 red lines. When I take off the charge cable, I get a black screen with battery 3 red lines and a chart of the charging cable.

    I had once the apple logo and the ipad started and I had the interface momentarily, but he lost.

    I have been struggling with this for the last 4 days and have tried almost every single suggestion there. Connection to the support of people was not possible on the web. And I am currently in another country where he sold the IPad to be able to switch the device back to the Apple Store to have checked out it during the warranty.

    Any suggestions are welcome. TIA.

    Well, I had the camera to load up to 61% where it is blocked again.

    Here's what I did that I had not done earlier out of the many resolutions that I tried from that provided in the forums and on the internet-

    I put the IPad for a couple of hours in his keyboard case and then all located in a thin cloth and put it on charge, ostensibly to warm a little battery. The warm-up was suggested in another thread, where a person even went to the extreme of using a fan hair dryer to warm the device. After a few hours, he did to load up to 60%, I got it out to check if it worked.

    Maybe I shouldn't have checked and waited a little longer, because the IPad is now stuck at 59 to 61% for the last 14 hours for free. I still struggle to go beyond this percentage, but at least I can use the device. Is there something I can do now to improve the percentage of charge? I tried the resets and even restored and updated the iOS through iTunes.

    Hope the above helps someone.

  • iPhone 6 more screen flashing and does not

    Hello

    For the last few days, my iphone 6 more screen starts flashing from the top and the touch screen doesn't respond. The phone is still under warranty.

    I went to apply here authorized service center in Singapore, they have looked at my phone and said, there is a slight inclination in the phone which will be considered physical damage where it can not be repaired / replaced under warranty, I have to bear the cost.

    Now, as I read on the forums, this is a problem of very well known with the iPhone 6 Plus, also, I don't see no noticeable turn in the phone of my eyes. I'm sure that this issue is not because of any physical damage, but as a result of an internal manufacturing.

    I'm really disappointed with the service of Apple. I don't know what to do now. Should I try to go to any other authorized service center and see what they say?

    Any advice would be appreciated,

    Thank you

    Rohit

    I started having the same problem with my Plus 6. I took it to the Apple store today and the tech told me that it is a known issue that they see a lot. They hope that Apple will issue a recall notice. My phone is out of warranty, so they would be out swap with a unit refurbished for $329. The real kicker is that he said that they have the same problem with a lot of devices refurbished right out of the box. My options are to keep a phone that keeps flashing and does not or pay $329 for a replacement who may have the same problem that has my current phone. It's really bad assumption of a product!

  • HP Envy 17: HP Envy 17 Notebook Synaptics click & drag does not work

    My Synaptics-click & drag does not work. When I click on an icon it will highlight, then I click on the new icon and drag, and it do not drag. If I manual pushes the lower left corner of the Tablet and make it work. Sometimes it works but 90% of the time it does not work. The problem makes this laptop a laptop of poor and done really click and drag a pain.

    I deleted the driver and installed the latest driver HP Synaptics for my laptop than a couple of times and no luck. I even downloaded the Synaptics ' generic driver for win 8.1 "and it's worse. I can see why there are so many people not loving is not this Synaptics click on the button and I would certainly not buy another if this is not resolved. All other synaptics features work except this one.

    Any help would be greatly appreciated.

    REB

    Figured it out. My mistake. Must click twice VERY quickly and hold to drag on the second. I have been to much too much time between clicks and it wouldn't hang in the window or icon. Hope this helps others who may have difficulty with this.

  • OfficeJet 6500 e709: prints w / scale on the left margin and does not print right side of the page

    Prints with a wide margin and does not print the last 2 "or 3" on the right side of the page. This occurs even when the value of the left margin to little or none.

    HP trouble shoot said there is nothing wrong and test page prints fine.  Then back to the problem so try to print.

    HI @philg2,

    I see your thoughts produce a wide margin left and right of the page is cut off. What program are you printing from, and this occurs when you print from all programs or just a particular program?

    I see your post that this is not happening when you print a test page, so I think the problem is somehow related to the driver or program that you use. Let's start with the HP print and Scan Doctor is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:

    • Connectivity:

      USB: Check that the USB connection from your computer to the HP product works properly.

      Network: Verifies that the network connection between your computer and your network is working properly.

    • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

    • Driver: checks the driver missing or corrupt files.

    • Device Manager: check the problems in Device Manager that could prevent printing.

    • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

    • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

    • Port Match: check the port settings for the HP product.

    • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

    • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

    • Print settings: check and adjust the print quality settings.

    • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

    • Scan tests: check the scanning mechanism, drivers, and registry entries.

    Source:try the HP Print and Scan Doctor for Windows

    Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

    If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

    • If you see only the Green checkmarks (), the tool did not find any problem.

    • If you see green sides (), the utility identified a problem and fix it automatically.

    • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

    • If you see a red X (), follow the onscreen instructions to fix the problem.

    Thanks, I look forward to hearing back on your part.

  • I have Outlook Express e-mail Icon stick on opening and does not end is there too much mail, how can I fix it?

    When you click the icon to open my Outlook Express icon (envelope) sticks on the screen of the monitor and does not open. Is there a way to get into the program to remove at least half or the whole of all the e-mail. It was not opening now for several days if I'm afraid it's risk of stuck with e-mail. I have been looking for a job online and get a ton of e-mail. I can get through the control panel and I think I saw the problem, but I don't know how to remove it. Help!

    I welcome suggestions. Rosemary

    Folders.dbx is probably damaged.

    In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

    The path to the message will be very similar to this:

    C:\Documents and Settings\Your User of utilisateur\Local Settings\Application Data\Identities\ {long string of letters & numbers} \Microsoft\Outlook Express

    With OE closed, find the Folders.dbx file and delete it.  Another will be created automatically when you open OE.

    Note these possible side effects:

    When you re - start OE, it will build a new index of all *.dbx files it can read and create a new Folders.dbx. However, understand that you will lose the mail directory structure and message rules will probably have to be edited.

Maybe you are looking for