Status of disk hard not Visible in the State of health - ESX3.5i

Similar Questions

• LR4 Volumes / disks hard not displayed in the folders Panel

  I've recently upgraded to LR4.1 and it seems to have done something strange with my files. As you can see in the earlier version all my hard drives are displayed as control panel items in the folders Panel. But now, it is only the display of the boot drive and I have to drill down to the folder of volumes to reach my hard drives... It's quite embarrassing since I'm working on several hard drives.

  I read in previous versions that people found a solution by using the option of "Promoting the subfolders" until all readers were displayed. However this option seems not to be in LR 4. None of my hard drives are compressed, and they are all internal. Can anyone offer any help or suggestion...

  It may be interesting to note that when I went to create a new catalog, he showed not all hard drives to begin with.

  Original view of the files Panel

  

  Current of the Panel records view - as you can see that a single disk is the display.

  

  I'm on Mac Os X Lion 10.7.4, LR 4.1

  This has been solved, and here's what I did...

  I have a right-click level folder above and clicked on 'hide this parent.

  Repeat until all files were gone. Yet e files still remain.

  Restarted Lightroom and viola! All hard drive panels are now back

  Dorin thanks for pointing me in the right direction!

  

• The State of health does not detect bad memory

  Hey everybody,

  I'm running 3.5 update 4 on a Dell 2950. The

  problem I have is that I get a defective DIMM message on the LED of the

  Server, but the parser memory under the health status is green and happy.

  Any ideas why this happens? I noticed on all of my boxes of the host

  You can not expand the section of memory under State of health; You can

  with all other sections. It could be related? Any thoughts?

  Thank you

  Kevin

  What is the code?  I had E2110 MBE (Bit error memory) which do not show in the State of health.  In the past, I used OpenManage on the ESX host.  The company I am now is not installed and I don't know if they will allow it or not.  My problem is that my mistakes were in equipment that located on our site of DR unmanned and we did not know the errors until we are to test!

  Kind regards...

  Jamie

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '.

  Remember, if it isn't one thing, it's your mother...

• How can I just disable logging in El Capitan? It is not visible in the disk utility by pressing alt and file!

  How can I just disable logging in El Capitan? It is not visible in the disk utility when you press alt and file!

  

  Mac OS X: about the logging of system - Apple Support files

  Hope this helps, good luck to you.

• Disk HARD/RAID controller not no projection in the State of health

  I've recently updated several ESXi 4.x hosts 5.1 and after the upgrade disks and the raid controller are showing is more in the section of the State of health of vSphere. The servers are all Dell PowerEdge 2950 and I even tried to make a fresh full install which did not help either. Here is a screenshot of the State of health of the problematic server. I need to get this resolved so that our monitoring solution can see the status of the disks/table.

  

  Here is a screenshot of an another PowerEdge 2950 still under 4.1 and it shows the disk controller and raid fine.

  

  Anyone seen this before? or have any ideas on how to solve this problem?

  Thank you

  Greg

  For any other person who comes through this, the problem is caused by ESXi 5.x is no longer handling/Bay record of voting in the same way as 4.x and earlier (see screenshots in an original message for comparisons). The only way to get the matrix of discs/fully new election is to have the ESXi host managed by vCenter (standalone no longer works). Hope this helps others as it was a big headache for me for awhile.

• Cannot open disk ' * hard ' or one of the snapshot disks it depends on. Reason: One of the parameters is not valid.

  I have 4 virtual servers running on a host ESX 4. 3. run OK but 1 gives the following error when you choose works in Vsphere client.

  Cannot open disk ' * hard ' or one of the snapshot disks it depends on. Reason: One of the parameters is not valid.

  I have attached the log file and the list of files in the folder of servers.

  Any help much appreciated.

  Welcome to the community,

  This virtual machine successfully powered on since July 23?

  To me, it seems that something went wrong with the clichés (I guess they are / were created by a backup application). Due to the size of the files I guess more that snapshots were created and not modified.

  If this is the case, you can delete the virtual machine to inventory, edit the vmx file by

  replacement of

  scsi0:1.filename = LHMU-VIC04_1 - 000004.vmdk

  with

  scsi0:1.filename = LHMU - VIC04_1.vmdk

  then right-click on the vmx file in browser data store and add it to the inventory.

  Before adding it to the inventory, delete the snapshot vmdk files (those with '00000 x' in their file names) as well as the vmsd file. BTW, you can also remove the zdump file if you want.

  If you are not sure if snapshots contain valid data, take a look at the (small) header files vmdk. If the CID and the parentCID match, snapshots were created while the virtual machine has been powered down.

  If you are not sure, please post back before doing anything.

  André

• I try to install vista on my laptop but a letter of the key is not visible, all the other parts are very well including the serial code, is there another way to get the key of the other information?

  Taché product key

  Hello

  I try to install vista on my laptop but a letter of the key is not visible, all the other parts are very well including the serial code, is there another way to get the key of the other information? The laptop currently has non-OS I've tried to reinstall.

  Thank you

  Scott

  Product keys are bit-agnostic - they don't care if it's 32-bit or 64-bit.

  However, cannot legally use the recovery disk from one computer to a different constructor machine - as other licenses are not properly paid..

  There is nothing nonetheless to try all possible variations on the absence of character (there are only 25, after all the )

  Other than that, your best option is to contact the manufacturer and order a set of recovery disc for the machine. I do no download available for Vista with SP2 - but you can download Vista with SP1 and create the disc.

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

• My Hotspot is not visible in the settings

  I update my iPhone to iOS 9.3 6s my hotspot is not visible in the parameter I update my iPhone of many other iOS version 9.3.1 to 9.3.3 and 9.3.4 9.3.2,and need help.

  Hello

  To configure Personal Hotspot, follow the instructions here:

  • Share your Internet connection with Personal Hotspot - Apple Support

  To help to solve problems with your hotspot, follow the steps detailed here:

  • Get help with Personal Hotspot iOS - Apple Support

• Report not visible in the address bar icon have installed the latest version, works with Safari.

  Icon not visible in the browser bar Firefox 40.0 report. Report of uninstalled, installed report 3.6.1507.14; restart the Mac under OS X 10.10.4 Yosemite. Still no report icon. Report NB icon present in Safari 8.0.7 and extras Menu.

  I'm not entirely sure about the feature you request on the subject, but here's what I could find:

  • http://www.Trusteer.com/rapport-icon-not-showing
  • http://www.Trusteer.com/support/how-can-i-tell-rapport-working and support: http://www.trusteer.com/support/submit-ticket

• Comments on CNET articles are not visible in the x 64 every night

  If you open any page of the CNET article for example URL below, there is a bar with a 'Comments' button and a few other links Twitter/Facebook/etc.

  http://News.CNET.com/8301-11128_3-57342036-54/Volvo-plug-in-diesel-hybrid-races-into-Europe/

  This bar is not visible from the x 64 Nightly build, even with all extensions disabled. It is visible that if I start Firefox in Mode safe.

  I find it strange because apparently it is disable the extensions I've already done manually and turn off any custom parameter and the theme that I don't have.

  Looks like a bug on the side of Firefox, as the same page works fine in IE and Chrome, and, as I remember, in the 32 official output x. Any idea?

  I see the same thing with the current 32-bit Nightly build on Linux.
  
  Looks like a problem with the JIT compiler.

  It works if I set javascript.options.methodjit.content to false.

  A good place to discuss problems with Firefox nightly builds and Firefox beta builds is the forum mozillaZine Firefox builds.
  
  There is also a thread every day to discuss problems with the last Nightly build on the build from mozillaZine forum.
  
  You must register on mozillaZine forum site to post in this forum.

  See http://forums.mozillazine.org/viewforum.php?f=23

• Share photos added to the photo library via the menu are not visible on the Photos

  Hello

  I started using DxO OpticsPro 10 to process Raw files. When I used the share menu in this application to "Add photo" pictures are exported but not visible in the Photos app. I see that they are in the photo library (Show Package Contents > Masters), but they are not visible in the Photos in the Photos app. However if I use "Export to Application" instead of "Add photo" in DxO OpticsPro the Photos app opens and the image is visible.

  You can't always do and changes directly to the photo library - you must use the program of Photos to import photos - adding photos to the library has no positive effect (and may even cause problems)

  LN

• DVD/CD drive is not visible in the Device Manager, but it works.

  Original title: My dvd/cd drive is not visible in the Device Manager but

  This works because I have jst begin with him. I can hear the disc running, but nothing ever comes and when I go to computer its not visible there either.

  Hello

  See the methods listed in the article mentioned below.

  My drive does not appear in Windows Explorer

  http://support.Microsoft.com/kb/330140

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 how to back up and restore the registry in Windows.

  See this link to view the hidden devices:

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  I hope this helps!

• computer Vista Home network is not visible from the XP computers

  I have a home network with 4 computers. Both run Windows XP, Windows Vista is running and
  It works in Windows 7. Each group can see all the others and can access shared files and printers
  with one exception. Vista computer is not visible from the XP computers. It is visible from
  the Windows 7 computer. I guess that there is a setting somewhere on the Vista machine
  That I need to change, but I'm not.

  Thank you.

  David

  Hello

  see Help for these links if

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Setting up a network home

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Vista File and Printer Sharing

• typed letters are not visible after the end of the custom field in editfield

  class CustomEditField extends EditField {}

  CustomEditField (String text) {}

  Super("",Text);

  }

  public void layout (int width, int height) {}

  Super.Layout (getPreferredWidth (), getPreferredHeight ());

  setExtent (getPreferredWidth (), getPreferredHeight ());

  }

  public int getPreferredHeight() {}

  Return super.getPreferredHeight ();

  }

  public int getPreferredWidth() {}

  return (Display.getWidth () * 2/3);

  }

  }

  It's my edit custom field.

  When I type on this field and reached end of the field, can't see the letters after that, but I can type (the only thing is to type letters are not visible after the end of the field)

  What is the solution

  I'm sure that you must explicitly enable scrolling. See Manager javadocs.

  In addition, you limit the scope of your field, which may also fail to scroll.

• BlackBerry Smartphones my caller ID is not visible on the phone of receivers

  When I call someone, my number is not visible on the phone receivers. I have enabled Caller ID, but it does not always show.

  I have a Bold 9000.

  Any suggestions how to solve this problem?

  Hiya!

  Does show anything at all? or just "Unknown"?

  You said that you check what ID caller is activated?

  Phone key > Menu key > options > General options > Show My Number is set to 'Yes' and limit my identity is set to 'network '?