The State of health does not detect bad memory

Similar Questions

• Unable to connect to the Internet error "Windows does not detect a network card installed properly"

  Internet does not connect and connection was well 5 hours ago. Message states: "Windows did not detect a network card installed properly" How should I proceed? Connection is on the laptop, but also other devices. Problem is only with the office.

  Any help is appreciated

  OT: Internet connection

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• My pc does not detect my memory card!

  The memory card or the drive is not detected by my pc,

  I tried to insert another card then try the other USB port then insert the reader on a different pc to windows 7.

  Nothing has worked.

  Please help me.

  ___________

  Concerning

  Vaibhav

  Hi vaibhav,

  Thanks for posting the request in Microsoft Community Forums.

  1. What is the brand and model of the computer?

  2. to confirm, is automatically set to the built-in help drive or external SD card reader?

  3. it worked before? If this isn't the case, please refer to this article.

  After you have inserted the memory card for the player, you can check the Device Manager to see if it is or not.

  Open the Device Manager:

  http://Windows.Microsoft.com/en-in/Windows7/open-Device-Manager

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Open the hardware and devices Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  For reference:

  I would say as update you the chipset for the later drivers and check the results.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  If you use an external SD card reader and you are unable to detect the drive to another computer, you need to either replace/repair the unit.

  Hope this information helps. Response with status so that we can help you.

• Post installation of the Vista SP2, it does not detect my DVD drive.

  Recently in the month of April 10, I had my laptop (Compaq Presario V6608AU) repaired because it doesn't detect DVD drive. The techincian had reinstalled vista on it and it was my regular vista. As my laptop has automatic updates enabled it installed Vista SP1 and SP2 later. After installation of SP2, my DVD player no longer works. The light initially whn system starts but windows gets loaded, it didn't post. Could some help me to get this resolved. Restore option I tried, but I restore options after installation of SP2. I have my handy DVD recovery but I'm handicapped because of this problem of DVD player and impossible to restore...

  Support Microsoft still offers a FREE support for Vista SP2 issues at: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1.  They will give you the expert help you need with this problem with SP2.  They can connect remotely to your computer to help diagnose the problem - something that we cannot do.  Enjoy the offer while it still exists.  I'm sure they can help you.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The application Adobe CC does not detect an update for first 2015.1.  How can I update?

  I work with a group of about 10 publishers.  Most have updated, I can't.  It becomes a problem that we are working on the same projects.

  Here is my solution:

  1. I deleted this file, AdobeUpdaterAdminPrefs.dat

  Info on location here: disable auto update in Adobe Creative Cloud and Adobe Creative Suite 6 apps

  2. then go here and download and install the updated packages: Adobe CC 2015 Direct Download Links: Creative Cloud 2015 Release | ProDesignTools

• I just bought a subscription to the United States for my computer in MX and the system asks me to put in a CC for future payments for years. I can put in my CC in the States because it does not give me the ability to change the country for payments. Has a

  can't put in my cc US in the system because it let me just put in an MX CC, how can I fix?

  Hi Christophe,

  I would ask you to please refer to the link below.

  Change the country associated with your Adobe ID

  Hope this will help you.

  Kind regards

  Hervé Khare

• Cannot start Windows, Windows Setup does not detect the hard disk, Bootmgr is misiing

  I have a few problems on my laptop [Acer 3810 t]

  -The first problem
  My mobile give me screen "cannot start windows' who have 2 choices: run the Startup Repair tool and boot normally. I chose to fix it, but nothing happens and stuck "starting windows" and gives unmountable boot volume 'blue screen '. the Dungeon of blues screen appear (for laptop is a not restart). So I turned off my phone and turn it back on it. the "could not start" screen again and I chose to start normally. but the result is negative. My portable Dungeon cannot start windows. Because of that I am using the advanced boot option and choose all the boot type such asit cannot load the safemode, last configuration etc, but the result is the same, you cannot start windows. in safe mode, its stuck in loading fileinfo.sys. I do not give up to try again with the advanced boot option. until I have a bad situation. My laptop can only 1 file in safe mode and blues screen do not appear again (my laptop only return at the beginning of start or restart)

  -The second problem
  because it cant solved, I want to reinstall my laptop. My OS is Vista 32 bit (pre-installed). I want to install the new operating system, windows 7. I use Dsik Flash bootable USB to install Windows 7. But in the BIOS, it is detected as a USB HDD. So I set my BIOS to load USB HDD to the first order. the installation can be done, but only until the "start Setup" screen and its deadlock. I have it wait up to an hour, but nothing happens. So I'm going to BIOS, change SATA mode to IDE mode AHCI. Then load the USB and go "installation program start screen. but the new problem is the installation of window does not detect my hard drive. So I can not choose the place to install the operating system. I have to load the driver, but I did not. Again to load the configuration to AHCI and IDE, until I get my HDD can detected in IDE mode. So I think I can move easily, I choose custom installation and choose the hard drive to install the operating system. But unfortunately, at the beginning of the process, after choosing the OS, the Installer gives error if installation location the installation failed. (I forgot the error message)

  -The third problem
  So far, I can't spend 'startup begins' as well in mode IDE and AHCI. Also bootmgr in my hard disk is missing, so I can't go to move the startup repair or the startup option in my HDD as before

  What is the error code that you got with blue screen?

  I think that there is a problem with your drive HARD check that by contacting acer...

• Xbox 360 atomatic does not detect the investigation period while I use WRT54G

  While I have the xbox 360 plugged since the WRT54G just does not detect, man I even use the modem and still does not detect it so I removed the cable from the modem to the xbox 360... I'm confused, I played the xbox 360 before using the xbox 360 of the of my brother and he still connect but now I can't after that I updated the firmware for the wireless, but this isn't a problem, I was still able to detect... Is there a setting that I probably did and I don't know how I did it in the first place

  What I do not get in I am able to go on the easy internet wii

  It is very important to always check the cable cause I just did and it connects now so problem solved.

• Dell 7 venue does not detect the external SD card

  Hi team,

  Recently, I bought a Dell Tablet conference 7. It works very well. But there is a problem with external memory card slot, it is not able to detect the external memory card. I tried a lot of cards, all are working well in other devices, but it is not detected by my tablet. I tried my tablet as well as formatting SD card, but is still no use: (.) Please give me a solution...

  Kind regards

  Chaitanya

  Hello friend

  I also have the dell site 7 16 GB, but never fell on these issues, except when I tried to upgrade my sd card 16 GB class 10 (san disk) to 32 GB class 10 (kingston). When I put the 32 GB it does not detect, so I tried my 16GB and everything was back to normal.

  Maybe it's the inability of the dell site 7 in support of the higher upper memory class ability cards.

  My dell has also supported 32GB sandisk hybrid pendrive, this USB key with both ends... called dual player... key USB OTG of IE

• Designjet 110Plus NR: HP Designjet 110 Plus NR Maintenance Utility does not detect printer

  Hello

  I have a Designjet 110 Plus NR printer that prints, but when you use the maintenance utility, it does not detect printer. I downloaded the latest version H.06.0 and am able to install it. but when the search for the printer it will not find it, and I have no way to pinpoint it too my printer. I have the printer connected to my computer via the USB port on a docking station HP residing in my laptop (Elitebook 800 G1 win 7 pro x 64). Also, it is connected via a parallel to the NIC dongle to make it available on the network for everyone to print too so. All can print, I can print but the Cyan is not always print and before you buy new print heads, I would like to clean and align with the Maintenance Utility. I tried to use the printer in the dock station, plugging directly into the laptop and the network to connect, but won't find printer. I tried the alignment of the front that I found in other forums, and it did not work. Whenever I went to the printer, I uninstalled all drivers and and the computer and rebooted system maintenance utilities. I installed the drivers from the HP website, from the disc initially supplied with the printer and our network, still no change print server. Am still able to print but not to run diagnostics or alignments. I've scoured the forums HP and all the "recommended" patches have never someone who in fact confirms the
  'Fix' worked. Can someone help with this problem? It has been about 4 days that I'm looking into this and frankly it's kinda ridicolous saw that it's a plug-and-play printer. Thanks in advance for any advice you may have!

  Well, the network adapter has failed. I managed to install the software, but he gave a generic IP address of the printer and gave me the same mistake of not being able to communicate with the printer. So, I pulled up an old laptop XP downloaded the drivers from the HP site, rebooted, printed the test page with success and installed the system maintenance utility. And WHOLA, I saw the printer immediately in the USB of Maintenance section and was able to run the diagnostic page and determine our problem. Thanks again for your help Mike!

• W510 does not detect 16 GB of RAM

  Hi, I bought Thinkpad W510 a month ago and then I updated memory up to 16 GB. My laptop detects only 8 GB of RAM. I tried to change the RAM, but it detects only the RAM into the slots on the keyboard. It does not detect the RAM which is at the back.

  My Ram is DDR3 - 1333 - PC3 - 10600. I have 4 X 4 gigabits.

  Am I missing something or I have to configure to make it happen?

  Thanks for any help.

  Concerning

  Amit

  Ok. Fixed.

  Necessary for installing memory in specific order.

  Open a ticket with Technical Support and they guided me to the article. I do not have the link right now as they asked for specific serial number of google.

  If I can find the article, I will udpate.

  Update: link to the KB - http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-75886

• My computer does not detect my built-in webcam, Device Manager indicates this device cannot start (code 10)

  I have a sony vaio laptop model: model PCG - 71912L: VPCEH32FX
  I went on the sony website and downloaded the driver and installed 4 times and still not a not detect.
  I did all the updates and no results.
  They just replaced my laptop screen and which could have been the cause of the problem, maybe it does not detect the new hardware.
  Tried everything I could do so via Device Manager and nothing.
  Please help, thanks.

  Hello

  What is the brand and model of the webcam?

  Method 1
  I suggest you to run the fixit from the following link:

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2
  I suggest you to see the following link for the associated 10 error code.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

• My laptop's built-in network adapter does not detect Windows 8

  I'm trying to share the internet connection from my laptop to another computer, but my laptop Ethernet card does not work. When I plug it in, the lights come on, but windows does not. It does not show it in device manager. I tried to install the driver, but it does not detect the card. Does someone know what to do? And the previous operating system, windows 7, worked perfectly with it.

  You may need to update the Ethernet card. Update from the manufacturer's Web site. Other possibilities include a problem with the connection that your ISP provides.  Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to pick out - something in itself, we find it hitched to everything else in the universe." -John Muir

• Card reader HP Pavilion dv6 does not detect some SDHC cards

  Hp Pavilion dv6-6104so laptop

  Windows 7-64 bit

  The laptop card reader does not detect some of our SDHC cards. We have updated the driver to the latest version, Realtek PCIE 6.1.7601.90 and BIOS, but it does not yet recognize some of our cards.

  We have six three SanDisk SDHC cards (4, 32 and 32 GB), two Kingston (8 and 8 GB) and an integral (4 GB). The card reader recognizes four of them (4 to 32 GB SanDisk cards and one of the two cards Kingston). What is strange and you may have already noticed is that the card reader recognizes only one of two cards with the same brand and quality!

  On the two cards that don't recognize in our specifications, they work properly in their corresponding cameras and are detected without problem by another reader of cards to laptop of HP Pavilion dv6-3138so, as well as by two netbooks from our two different brands.

  When we connect the camera (a Canon and Sony, both point) to the computer via a cable USB 2.0, the laptop detects the cameras and through them, we can access the cards.

  We bought the laptop less than two weeks in Helsinki, Finland.

  Thank you in advance for your help!

  Hey everybody,

  Use of a high capacity card in a standard card reader location causes this problem. Im going to guess that the cards you ar having problems with are not standard SD cards and SDHC cards. As Naoto said, using a camera as a card reader you workaround this. You can also look in the adapters of SDHC card reader. Here is a good article on SDHC cards: http://goo.gl/lj5Fq

  I hope this helps!
  Sean

• 4380 all-in-one printer does not detect the print cartridge

  My all-in-one printer (model 4380 vivera, bought in Switzerland) does not detect the print cartridges. I traded the color cartridge with that of another, older than I was and now everything is fine. I don't know when, this problem will arise again. The last time I was so frustrated that I bought another printer (HP 2050) which seems to work without problems. I have unplugged, replugged and clean the cartridges with filtered water. The problem may arise at any time. Help, please. Thank you.

  I'm sorry you have a problem with your ink not detected.

  The problem may be because the printer is of the Switzerland and the ink cartridges are NOT. The printer will only accept cartridges of the same region/country.

  For example, if you are in the United States and buy a printer and the cartridges come from GERMANY, he cannot read. Will suit most, but some of the contacts are different causing not well read the cartridge from the printer.