Disk HARD/RAID controller not no projection in the State of health

Similar Questions

• Status of disk hard not Visible in the State of health - ESX3.5i

  Hello

  Please find the attached screenshot.

  We are not able to view the status of the hard drive in the Configuration > State of health. Any comments?

  Version ESX - 3.5i

  HP Proliant DL 585 G1 - Server

  Berries - Smart Array 5i controller

  (We really are installing BMC monitoring tool and this tool does not identify hard drives).

  Concerning

  HMS

  To see the State of health of the disks and RAID configurations on a HP host, you must install CIM HP (aka offline Bundle) providers for the specific ESXi version on the host. However, I checked the HP support web site, and there's no CIM providers for the server model you are using.

  I have a HP DL380G5 and G7 host running with installed CIM providers and health status occurs when connect directly to vCenter as well as for the host.

  André

• I was told that 3 TB hard drive is not as reliable as the 2 TB drive. True?

  I was told that 3 TB hard drive is not as reliable as the 2 TB drive. True?

  Not true. What fool told you that?

• MXF OP1a not no projection in the "Format" drop-down menu.  I can't export MXF files.

  MXF OP1a not no projection in the "Format" drop-down menu.  There is a category of MXF OP1a in presets browser, but it is not active.  I downloaded the XDCam MXF presets, but cannot import them because the encoder cannot be identified.  How can I get MXF or XDCam MXF Op1a appears in the Format drop-down menu so that I can import the presets and export code MXF files?  Thank you...

  Hi beating Bits,

  The only thing I want to do is to incorporate a CSC file into an XDCam

  within an MXF.  If you could help figure me out how to do it

  codec to export available in TEA (or Prime Minister), I would be grateful.

  This is not supported natively in SOUL CS6. I'm sorry. Updated SOUL CC for this feature.

  Thank you

  Kevin

• The State of health does not detect bad memory

  Hey everybody,

  I'm running 3.5 update 4 on a Dell 2950. The

  problem I have is that I get a defective DIMM message on the LED of the

  Server, but the parser memory under the health status is green and happy.

  Any ideas why this happens? I noticed on all of my boxes of the host

  You can not expand the section of memory under State of health; You can

  with all other sections. It could be related? Any thoughts?

  Thank you

  Kevin

  What is the code?  I had E2110 MBE (Bit error memory) which do not show in the State of health.  In the past, I used OpenManage on the ESX host.  The company I am now is not installed and I don't know if they will allow it or not.  My problem is that my mistakes were in equipment that located on our site of DR unmanned and we did not know the errors until we are to test!

  Kind regards...

  Jamie

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '.

  Remember, if it isn't one thing, it's your mother...

• Satellite C660 - 1J6 Win7 installation failed - disk HARD disabled controller

  IV received a toshiba satellite c660-1j6.
  The problem is that the hard drive has been deleted (including the back upward). I don't have any of the Toshiba backup disks, but I have new copies of win 7 home prem and xp pro. However when I try to install win7 that I get as far as selecting the installation drive and I click on the drive and I get the message about how windows cannot be installed to this disk please check the drive controller is enabled.

  IV check the BIOS then several times and I can't find anything to do with it apart from the Mode of the SATA controller and which dose nothing.
  The Toshiba tech support when no help at all. so is locked HD or BIOS, and is it possible to unlock them so I can install the o/s?

  IV tested the drive by hooking up a PC desk top and installing windows like that, but as soon as I put the drive in the laptop it comes up with no installed new o/s

  Can anyone give any help... or even indices, iv it for a week now and im going crazy.

  Hello

  HARD drive is not locked. You can install any OS on the HARD drive.
  Usually, the Windows 7 operating system already contains the SATA drivers that are required to see the HARD drive. So it of not necessary to include the SATA drivers while installing Win 7. You said that you have a copy of Windows 7 disc. Is this an original disc for Win 7 complete with functional Microsoft?
  I ve installed several times Win 7 on my Toshiba notebooks and didn t need to use SATA drivers

  In the BIOS, you have found the SATA controller mode. This should be set to AHCI. You can change this pressing SPACE.
  But also the default BIOS settings should do the job.

• z820: looking for a software raid manage and view the status of disks hard raid

  HP z820 workstation,

  product # D3J63UT

  I'm looking for raid management software

  

  Thank you.

  I suggest that you follow the steps listed in the HP Document: "Z - series Workstation detection and fixing a hard drive failure within the RAID Controller utility" in the URL: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04474148#N10829 you can find instructions how to enter each State type of RAID (Intel RST, 2308 LSI and LSI 9260-8i controller - It's the main RAID controllers usually associated with the HP Z820 workstation according to the particular configuration you ordered). Note that in most of the cases described in this document, you need to access the configuration of RAID controller during computer startup steps, by pressing CTRL + I (for Intel RST) or CTRL + C (for LSI 2308) or CTRL + H (by LSI 9260-8i). The installation program uses the RAID controller firmware and does not require to install complex inside Windows software, because it is done outside of the Windows operating system before starting. Find more details in "HP Z220 SFF, CMT Z220, Z420, Z620 and Z820 workstations maintenance and Service Guide" in the URL: http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c04205252-1.pdf , in the devices of annex b: Setup RAID (pp. 161-171) all types of RAID controllers that are relevant at the workplace Z820 are discussed.

• a disk hard mbr does not recognize my card mother xp - 703

  Hello.

  I'm trying to downgrade my windows xp-703 aspire 8.1 for windows 7 and cannot operate.

  I disabled the secure boot. Windows 7 will allow to install on an MBR disk, but when I put the drive on the MBR (using another computer) that acer will not see the hard drive.

  I feel, this computer will only recognize the GPT disks.

  I even took a drive work with windows 7 and connected to this computer, and it still does not recognize the drive.

  Can anyone offer advice.

  Concerning

  Clive

  Hi all.

  Thank you very much for all your comments. It is resolved. I now running Windows 7.

  (XC - 703) my mistake in the subject line.

  I need win 7 because I have a software that does not work in win8 or win10.

  It has proved to be a BIOS initially. I got P11 - B1, who does not have the option "Launch the CSM". I had to reinstall win8, so I could run the upgrade of BIOS of windows that I was unable to boot from any external drive. Update BIOS version P11 - B2. Once I had started from my win7 disk (64-bit), I could use SHIFT + F10 to bring up a DOS window and use DISKPART to clean the hard drive.

  He then completed the installation of windows 7. I knew that he should like Acer provides Win7 drivers.

  Once again thanks a lot for your help.

  Clive

• Disk hard online, but not visible in Windows Explorer

  Hi guys, I need a little help.

  Today, I installed an old 80 GB Maxtor Diamondmax 10 PATA hard drive on my other PC, a Dell Inspiron 530, as a second HDD. I had to order new parts to connect actually upward from the power supply and motherboard SATA and IDE connections are not, but all those who are working very well.

  My problem is that this Maxtor drive does not appear in Windows Explorer. BIOS, see Device Manager it disk management he sees (and even said it's online). Just not Windows Explorer.

  In disk management, it is not a drive letter assigned to it, and when I right click on the disk partitions, anything but 'Delete the Volume' and 'Help' are grayed out. (Screenshot here: http://i39.tinypic.com/2ujpbeo.png)

  I'm a bit stumped, it's almost like I can't use the drive at all. Any ideas?

  Here's some more information about the system:

  OS: Windows Vista editions Home Premium (Build 6002, Service Pack 2)

  BIOS: Phoenix AwardBIOS review 1.0.18

  Motherboard: Foxconn G33M02

  CPU: Intel Pentium Dual-Core E2140 1.6gHz

  Memory: 3072 MB DDR2 SDRAM

  First HARD drive: 250 GB Hitachi SATA sister

  HARD drive secondary: 80 GB Maxtor Diamondmax 10 PATA (with jumper set to "Master DS")

  GPU: ASUS EAH4670

  And I should add, just in case... This is PATA to SATA card, I use the drive: http://www.ebay.co.uk/itm/320759737706?ssPageName=STRK:MEWNX:IT & _trksid = p3984.m1439.l2649

  And I just use a SATA to Molex cable I found to convert the power.

  Thank you

  Hello

  Thanks for this info. I looked more into filesystems and it turns out that the disc was either FAT or NTFS - it was EXT2 which is a Linux file system. I found this by starting Ubuntu that supports multiple file systems.

  I didn't format it had data on personal, but I found an EXT2 driver and can now browse the Windows hard disk.

• Windows 7 upgrade failed - disk HARD recovery does not work

  I just received my Windows 7 upgrade disc, followed the procedure and he managed to upgrade Vista 64 bit for Windows 7 32 bit! Some drivers also seem to, were charged more than once.

  I tried to do a system restore from the recovery of HARD drive partition - and it won't!

  Can someone, please?

  Hello

  Drive HARD recovery does not work because Win 7 ran the Boot Manager and maybe the HDD partition has been affected.

  I guess you want to roll back to Vista preinstalled Toshiba.
  I think in your case, only the recovery disc will help you.

  Welcome them

• Windows 7 disk HARD Propertis does not

  In windows 7 if I right click on the HARD drive in the computer properties and then select properties of system properties is displayed. Works OK in the MenuBar in the properties of the computer. The right-click method works sometimes briefly after that but then returned to the State of system properties.

  How can I correct this is a corrupted registry entry?

  Thenks a lot for any help

  Neil

  Hi Neil,

  Thanks for posting in Microsoft Communities. This problem can occur if the mouse pointer is not properly placed on the HARD drive. Provide the following information:

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 2: Follow the steps in the article.

  Optimize Windows 7 for better performance

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Let us know if you need more assistance. We will be happy to help you.

  Thank you.

• New disks hard Hitachi does not fit on 8600

  I got Hitachi 7200 RPM 60 GB hard drive installed on my Inspiron 8600 who died. I bought a new HDD Hitach 7200 RPM 200 GB but its interface is different, the pins would not fit! Am I missing something? This hard drive is not going with my Inspiron? I thought that all hard drives have the same interface, I'm confused.

  There is a removable adapter at the end of the old drive (with a lot of legs/ankles) even it would not go with the new hard drive!

  The old interface looks like:

  I I I I I I I I I I I I (each a PIN)

  The new hard drive has this type of interface:

  ---(une représentation brute, ses deux segments et n'a pas de broches)

  Please help what I do

  
  

• CS6 hearing files not no projection in the body

  Agency, I did the "Edit...". Edit in Adobe Audition... Command in sequence. This opened all the clip audio files as a group at the hearing as scheduled. Has been done with the change in the hearing, saved projected hearing via "file...". Save command.

  To return to the body (which was open all the time). Nothing. Not a trace of the changes. Not anywhere I can find.

  (1) what is supposed to happen? I thought I'd see the audio files newly published in the project Panel and the audio file newly published on the timeline. But, what I see?

  (2) if I'm supposed to get the files in the body of this operation, and I don't have, what did wrong? Said in other words, there are tutorials out there that illustrate the correct way to do this body-> Audition-> dance of the body?

  (3) at this point, I guess that my way is just to export the project to hearing in body manually via the «multitrack...» Export to Adobe Premiere Pro". Is there a better way?

  I thought about it. By trial and error. Argh... The answer is the behavior I see is correct, if is not intuitive.

  Hearing, behaves differently depending on whether you use "edit..edit in adobe audition... sequence ' or ' edit..edit in adobe audition... clip" in the body.  If the later, it behaves more or less similar to the use of dynamic links - that is to say, it automatically replaces the audio portion of the clip on the timeline of the organization when you save the project to the hearing of the hearing. Nice, smooth, etc.

  But when you use send the entire sequence, he cannot actually do. To retrieve a value of entire sequence audio in the body, you must do it manually via the hearing "multitrack... export to adobe first pro ' command. This will find the right directory and open the project in body organism (if there is more than one organization project file in the directory, you will be asked as you want), then it will create a new bin in the project body panel and agency will import new files to Audition. Then, you have to manually, drag the new audio file on the timeline. He must do it because it gives you is a single element (the audio of the complete sequence in the form of single *.wav file) and not a collenction of clips.

  I'm adding to this topic so that anyone looking for information about this behavior between the Organization and the hearing in the future can perhaps be pointed in the right direction.

• Information overlay not no projection in the print Module

  I have LR 5.3 on a Mac in the Mavericks. The overlay Info in the print Module can not be found with the 'I' key? Where at - it go or what I am doing wrong? I see the news in the library.

  Not to mention that this bug does not with the I key, it does not work with the menu item 'Show the overlay of information' in the display module printing menu.

  There is also an element DOUBLE "grid" in the display module printing menu.  A glitch of cosmetic as both work.

  10.8.5 Lr5.3 OSX

  !

• Windows installation disc needs for a new disk hard but is not available

  Hello

  The hard drive on my PC HP badly shot - he tells me I need to check for consistency, but it cannot and will not run chkdsk on a restart and will not let me create a restore disk.

  OK, I accept that I need to buy a new hard drive but I have no CD to install Win 7. The pc has a partition called "factory secctings" but it will not create a cd of Windows or a restore cd or a Sun.

  Microsoft has said that it is not available for me because my serial number includes the letters OEM. I had a case created at HP, and a person called me and said I should get the CD of the os from Microsoft, or from the store I bought from (Staples). Staples said they have no CD for Win 7 and cannot make me a. They said get them from Microsoft or HP.

  The number of cases is 3016271460

  See that I get nothing from Microsoft, HP, or Stqples. I never got a CD with the pc because, I guess, it's there on the partition to factory settings, but with the failure of hard drive I can't use it.

  All have a suggestion?

  Your hard drive can hold the DEFECTIVE SECTORS.

  The only way to get windows 7 disc is to buy a new Amazon / similar online stores / service centres.

  You can try this:

  ""http://www.sevenforums.com/installation-setup/151566-reinstalling-windows-7-a.html#post1300819 " "

  Browse the site and do the steps as shown.