status of the instances
There is a subprocess activity in the process. If the sub-process is not finished, status of the main process is in process and running.If there are multiple instances of the process, stopping in the sub-process, the shutdown process. How know there are a lot of bodies hanging in the sub-process?
Hello
This would not be a use case nice to use the building in BAM functionality? The built-in dashboard contain something like that if I'm not confused.
Or global interactive activity and select as main task - > display the workload.
Just a couple of the idea, which would prevent you from you to write something custom to do this.
Kind regards
Nils
Tags: Fusion Middleware
Similar Questions
-
Instead of having two articles about the Meeting Minutes BP for the status of the line item and the other for the status of the Action which is quite confuse end users, is the Action the Action element anyway to reverse day point BP to the State of MA Business billing without having two articles.
Please notify.
Mohamed Hussein
Hi Mohamed/Samba,
There is a solution to remove confusion for the end user. It requires a cool little General admin config, but it works beautifully from a point of view of the end-user. It's a little complicated to describe, but I'll do my best.
-Create a new SPD DD called, for example, ActionItemStatus. You must create a corresponding list of values in the list of DD pp, for example: pending, complete, canceled.
-Then you create 1 again for each status value (all configured with the new "ActionItemStatus" DD, in my example here it is 3 News: ifAIStatusPending, ifAIStatusComplete, ifAIStatusCanceled)
-You add the 3 news to the single instance BP (information on the project)
-On the BP MM change you the former status of action point TO use the old DD for the new "ActionItemStatus" DD
-On the BP THE remove you the former status of point of Action IN the form of HAVE it (does not need more)
-You add the 3 news to higher forms HAVE (hidden block) and then configure to auto-pop of the single instance BP "project information".
-Now the thing: you config have all 3 of Reverse-auto-pop line MM point "Action point rank" OF using the new conditional RAP, RAP that is as follows:
-RAP OF "ifAIStatusPending" when superior HAVE form status = pending
-RAP OF "ifAIStatusComplete" when superior HAVE form status = Complete
-RAP OF "ifAIStatusCanceled" when superior HAVE form status = canceled
- As an end user you then go to the "Project information" unique instance BP and set each of the news as follows: ifAIStatusPending = 'Pending', ifAIStatusComplete = 'Complete', ifAIStatusCanceled is "Cancel".
-Create a new record of MM, what should happen now:
-new record MM created
-user adds a line item I (HAVE status is empty at this time)
-l' user completes the form MM and "send."
-a new record of I is created automatically by the MM section
-l' higher State of form HAVE the folder is "pending".
-l' user sees only the registration State (which is queued)
-the 3 news in the hidden AI top shape block get AP with the values of the instance unique record of BP
-Because the higher status form is = pending the "ifAIStatusPending" on the hidden block will automatically be RAP it's value to the MM line item
-L' user responsible for completing the action item done their work, and then sets HAVE 'action' to complete and "send."
-L' higher State of form HAVE past from "pending" to "complete."
-Because the higher status form is = full of 'ifAIStatusComplete' on the hidden block will automatically be RAP it's value to the MM line item
Upshot
-l' end user sees only a single State in the superior form of AI that is automatically defined according to workflow actions/measures
-l' end user sees only a single State on the MM line which also automatically changes the status to HAVE it (with RAP)
As I said, there is an overload of config admin, but there is a lot of value from an end-user perspective, then sometimes worth the pain of the admin! In addition, it is difficult to describe, so if you can not follow my explanation please let me know and I'll try to clarify.
Good luck.
Ian
-
Error ORA-17503 at the start of the instance data in the CARS
Hello!
I installed Oracle 11 g SE (11.2.0.4) with CARS with 2 nodes on RedHat 7.1 with separation of roles (grid and oracle db run under different users)
Just after installation it worked, I was able to connect to the database, create a table and see it on the two nodes of the RAC.
But after restarting the servers, I can not make it works again
Maybe someone could help me understand what I am doing wrong?
When I'm trying to start a database on the vm-ora-05 node instance, I get this:
sqlplus/nolog
01:35:22 @: > connect / as sysdba
Connect to an instance is idle.
01:35:28 SYS @ racdba1: > start
ORA-01078: failure in the treatment of system settings
ORA-01565: error in the identification of file "+ DATA/racdba/spfileracdba.ora".
ORA-17503: ksfdopn:2 could not open the file +DATA/racdba/spfileracdba.ora
ORA-12547: TNS: lost contact
01:35:32 SYS @ racdba1: >
**********************************
Environment variables for GRID
ORACLE_HOME=/U01/app/11.2.0.4/grid
ORACLE_SID = + ASM1
Environment variables for Oracle DB
ORACLE_HOME=/U01/app/Oracle/11.2.0.4/rachome1
ORACLE_SID = racdba1
**********************************
If I check the status of the disk groups and +DATA/racdba/spfileracdba.ora asmcmd file it seems to be Ok (for me at least)
[grid of grid@+ASM1] $asmcmd
ORACLE_SID = [+ ASM1]?
The Oracle base remains unchanged with the value/u01/app/oracle
[+] ASMCMD > lsdg
State Type sector Rebal to Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files name of the block
EXTERN MOUNTED N 512 4096 1048576 5121 4725 0 4725 0 SRC /.
EXTERN MOUNTED N 512 4096 4194304 153596 151240 0 151240 0 N DATA.
EXTERN MOUNTED N 512 4096 4194304 153596 153020 0 153020 0 N FRA.
ASMCMD [+] > ls-l +DATA/racdba/spfileracdba.ora
Name of type Redund time scratched Sys
N spfileracdba.ora = > +DATA/RACDBA/PARAMETERFILE/spfile.267.894291829
ASMCMD [+] > ls-l +DATA/RACDBA/PARAMETERFILE/spfile.267.894291829
Name of type Redund time scratched Sys
Fichier_parametres UNPROT COARSE NOV 03 01:00 Y spfile.267.894291829
**********************************
At the same time, do not know why oracleasm scandisks/listdisks appear not all discs...
[root@vm-ora-05 Diba] # / usr/sbin/oracleasm scandisks
Reload from disk partitions: fact
Cleaning up stale ASM disks...
ASM disks scanning system...
[root@vm-ora-05 Diba] # / usr/sbin/oracleasm listdisks
[root@vm-ora-05 Diba] #.
**********************************
Here is the result of the res stat-[NULL] crsctl you and crsctl check cluster
[grid@+ASM1 grid] $crsctl res stat - you
--------------------------------------------------------------------------------
TARGET STATE SERVER STATE_DETAILS NAME
--------------------------------------------------------------------------------
Local resources
--------------------------------------------------------------------------------
ORA. CRS.dg
Vm-ora-05 online
ORA. DATA.dg
Vm-ora-05 online
ORA. FRA.dg
Vm-ora-05 online
ORA. LISTENER.lsnr
Vm-ora-05 online
ORA.asm
LINE Started vm-ora-05 online
ORA. GSD
In offline mode offline vm-ora-05
ORA.net1.Network
Vm-ora-05 online
ORA.ons
Vm-ora-05 online
--------------------------------------------------------------------------------
Cluster resources
--------------------------------------------------------------------------------
ORA. LISTENER_SCAN1. LSNR
1 vm-ora-05 online
ORA. CVU
1 vm-ora-05 online
ORA. OC4J
1 vm-ora-05 online
ORA.racdba.db
1 stop an Instance offline online
Terminating the Instance offline in LINE 2
ORA.scan1.VIP
1 vm-ora-05 online
Ora - ora. VM - 05.vip
1 vm-ora-05 online
Ora - ora. VM - 06.vip
1 in LINE THROUGH MORE out of vm-ora-05
[grid@+ASM1 grid] $crsctl check cluster
CRS-4537: Cluster Ready Services is online
CRS-4529: Cluster Synchronization Services is online
CRS-4533: Event Manager is online
[grid@+ASM1 grid] $
Please help, this problem makes me crazy)
-rwxr-x---x 1 grid 209854149 28 Oct 02:10 /u01/app/11.2.0.4/grid/bin/oracle oinstall
^ ^ This x must do for setuid/setguid not x for execute
Check the docs on setuid/setguid and this note:
ASM login fails with ORA-12547: TNS: lost contact (Doc ID 1942740.1)
https://docs.Oracle.com/CD/E19683-01/816-4883/secfile-69/index.htmlThis should solve the problem:
/U01/app/11.2.0.4/grid/bin/Oracle chmod 6751
Concerning
Thomas
-
error in creating a shell script to the status of the database
Hello
I'm working on a script that made the extraction of information from the database server and gives output on the instance state.
but I'm stuck. I get an error that I can't sort out.
Here is the script
{code}
ORATAB = / var/opt/oracle/oratab
echo "'date" ".
echo "status of databases Oracle"hostname": \n".
"DB ='egrep-i ': Y | ': N ' $ORATAB | "cut d": "-f1 | grep - v "-#" | "grep - v ' \ *"
PsList = "'ps - ef |" "grep pmon'."
for I in $db; do
echo "$pslist" | grep ' ora_pmon_$ I "> / dev/null 2 > $ 1
if (( $? )); then
echo "Instance Oracle - $i: down.
on the other
echo "Instance Oracle - $i: upward.
FI
fact
{/ code}
and here is the result
Oracle@mdcxuatdb05:~$ sh checkdb.sh
Tuesday, September 1, 2015 18:13:45 IST
Mdcxuatdb05 status of Oracle databases:
CHECKDB.sh [7]: cannot open
Oracle instance - egrep: down
CHECKDB.sh [7]: cannot open
Oracle instance - i: down
CHECKDB.sh [7]: cannot open
Oracle instance - ': Y |: N ': down
CHECKDB.sh [7]: cannot open
Oracle instance - $ORATAB: down
CHECKDB.sh [7]: cannot open
Oracle instance | : down
CHECKDB.sh [7]: cannot open
Oracle instance - cut: down
CHECKDB.sh [7]: cannot open
"" Oracle instance - d ': ': down
CHECKDB.sh [7]: cannot open
Oracle instance - f1: down
CHECKDB.sh [7]: cannot open
Oracle instance | : down
CHECKDB.sh [7]: cannot open
Oracle instance - grep: down
CHECKDB.sh [7]: cannot open
Oracle instance - v: down
CHECKDB.sh [7]: cannot open
Oracle instance - "-#": down
CHECKDB.sh [7]: cannot open
Oracle instance | : down
CHECKDB.sh [7]: cannot open
Oracle instance - grep: down
CHECKDB.sh [7]: cannot open
Oracle instance - v: down
CHECKDB.sh [7]: cannot open
Oracle instance - '-* ': down
can someone help me please in this matter.
I am running this script in solaris.
echo "$pslist" | grep ' ora_pmon_$ I "> / dev/null 2 >$ 1
change the line above to
echo $pslist | grep ' ora_pmon_$ I ">/dev/null 2 > & 1... updated the last of them, I just kept 1 to test
-
Why lsnrctl status displays the services that are not in listener.ora?
I have a database 10g on Solaris 9.
When I do "lsnrctl status" I get the following:
LSNRCTL for Solaris: Version 10.2.0.5.0 - Production on July 29, 2015 11:46:30
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=cees2) (PORT = 1521)))
STATUS of the LISTENER
------------------------
Alias LISTENER
For Solaris TNSLSNR version: Version 10.2.0.5.0 - Production
Start date July 14, 2015 07:52:31
Availability 15 days 3 h 53 min 59 s
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /oracle/tns/listener.ora file
The listener log file /Oracle/OraHome/10.2/network/log/listener.log
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=cees2) (PORT = 1521)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC)))
Summary of services...
Service 'PLSExtProc' has 1 instance (s).
Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
Service "FEC" has 1 instance (s).
Instance "FEC", State LOAN, has 1 operation for this service...
Service 'ceesXDB' has 1 instance (s).
Instance "FEC", State LOAN, has 1 operation for this service...
Service 'cees_XPT' has 1 instance (s).
Instance "FEC", State LOAN, has 1 operation for this service...
The command completed successfully
And here is the content of the listener.ora file:
##############################################################################
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = cees2) (PORT = 1521))
)
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC))
)
)
)
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = oracle/OraHome/10.2)
(= Extproc PROGRAM)
)
)
My question is where are the EEHC, ceesXDB and cees_XPT services if they are not defined in the listener.ora file?
Thank you
Michael
Try this search string in your favorite browser:
listening service Oracle xdb
-
Application Manager - error recover the status of the component
Hello!
I managed to installed Portal 2.1 with load balancing and access to outside and inside, everything works as expected. In my environment, there are two nodes in full mode and the other with the mode 'connector only. In the health care system, on the single node connector I have message: Application Manager - integrated components: error recover the status of the component. I think it's fair. Connector do not work in the application manager, why this message?
Kind regards
Piotr
How this camera only mode connector has been installed? Clone you an existing instance? or you have not deployed a new machine virtual dice EGGS and chose this role?
-
Cannot start the instance with srvctl only sqlplus
Hello
I must be missing something very obvious here... I can't launch the instances on our 2 CCR node with srvctl (fine get all others managed by cluster service/listeners/etc), but if I use sqlplus + start, all right.
Oracle Standard Edition 11.1.0.7 on Linux x 86-64
Instances: bopa1 + bopa2
Nodes: bls0114 + bls0115
The error I get is:
-----
bls0115:ora. Bopa.bopa2.inst:
bls0115:ora. Bopa.bopa2.inst:SQL * more: version 11.1.0.7.0 - Production on Sun Oct 21 16:12:59 2012
bls0115:ora. Bopa.bopa2.inst:
bls0115:ora. Bopa.bopa2.inst:Copyright (c) 1982, 2008, Oracle. All rights reserved.
bls0115:ora. Bopa.bopa2.inst:
bls0115:ora. Bopa.bopa2.inst: Enter-username: connect to an idle instance.
bls0115:ora. Bopa.bopa2.inst:
bls0115:ora. Bopa.bopa2.inst:SQL > ORA-00119: invalid specification for the system REMOTE_LISTENER parameter
bls0115:ora. Bopa.bopa2.inst:ORA - 00132: error syntax or network name not resolved "LISTENERS_BOPA."
bls0115:ora. Bopa.bopa2.inst:ORA - 01078: failure in the treatment of system settings
bls0115:ora. Bopa.bopa2.inst:SQL > disconnected
bls0115:ora. Bopa.bopa2.inst:
CRS-0215: could not start resource 'ora.bopa.bopa2.inst '.
-----
Looking lsnrctl status, I don't see that LISTENER_host name on the nodes, has something to do with it?
The cluster has been newly installed and works fine otherwise.
Published by: traore on 25 October 2012 14:25Hello
you have defined a REMOTE_LISTENER parameter in the database which can be solved with the TNSNAMES.ora uses the clusterware.
Then 2 possibilities:
(a.) your tnsnames.ora to the dbhome contains no entry of the LISTENERS_BOPA.
(b) you use a tnsnames.ora different due to the use of the TNS_ADMIN variable. It's probably settled in the sqlplus environment, but not on the level of database/instance when clusterware tries to start.Set it with:
setenv srvctl database dt ' "TNS_ADMIN = ". or perhaps at the level of the instance (instance of setenv srvctl - but I'm not sure it exists.) Sorry no atm 11.1 cluster to check).
Concerning
Sebastian -
Start the clusterware (CRS) without starting the instance in a node
version is > 11.2.0.1
operating system: Solaris 5.10
Using
I can start the CRS in a node. But I don't want to start the instance in this node. I just want to start the clusterware and ASM instance in this node.#$GRID_HOME/bin/crsctl start crs
No idea how I can do this?
Haven't seen this option in the Help menu for crsctl# ./crsctl -h Usage: crsctl add - add a resource, type or other entity crsctl backup - back up voting disk for CSS crsctl check - check a service, resource or other entity crsctl config - output autostart configuration crsctl debug - obtain or modify debug state crsctl delete - delete a resource, type or other entity crsctl disable - disable autostart crsctl discover - discover DHCP server crsctl enable - enable autostart crsctl get - get an entity value crsctl getperm - get entity permissions crsctl lsmodules - list debug modules crsctl modify - modify a resource, type or other entity crsctl query - query service state crsctl pin - Pin the nodes in the nodelist crsctl relocate - relocate a resource, server or other entity crsctl replace - replaces the location of voting files crsctl release - release a DHCP lease crsctl request - request a DHCP lease crsctl setperm - set entity permissions crsctl set - set an entity value crsctl start - start a resource, server or other entity crsctl status - get status of a resource or other entity crsctl stop - stop a resource, server or other entity crsctl unpin - unpin the nodes in the nodelist crsctl unset - unset a entity value, restoring its default
Hello
You cannot give this information directly at the start of clusterware.
This option is to disable the resources, you do not want to start before running the node.
Note: You can do it from another node, to disable the startup on the node that you want to start:In general, you can do this with
Disable srvctl $The correct syntax depends on the type of management you used.
Managed political use of databases:srvctl disable the d
- n database Administrator management databases:
srvctl disable instance d
-i " ". Concerning
Sebastian -
The TNS service name gives preference to connect the instance that is in a mount
OS: HPUX
Oracle version: 11.1.0.7
Why TNS service name give preference to connect the instance that is in a mode of installation and the dsiaply ' ORA-01033' as mentioned below.»
I wanted to connect the single instance that are OPEN (no EDITING) using connection string and want to know the status of all instances using SQL query "select instance_name, status of gv$ instance. How can I achieve this?
I have four-node rac and instance cluster four, one instance on each node and the State of the instances are as shown below
SQL > select instance_name, status of gv$ instance;
STATUS INSTANCE_NAME
---------------- ------------
dtrac1 OPEN
Dtrac4 ROAD
dtrac3 OPEN
dtrac2 FORCE
I tried to connect using the name of the service "dtrac" (the tnsnames Details give below) any node, it gives priority to the instance that is set up and shows the sequence of error messages
SQL > conn system/vcs@dtrac
ERROR:
ORA-01033: ORACLE initialization or shutdown in the process ID: ID of Session 0: serial number 834: 139
WARNING: You are more connected to ORACLE.
SQL > conn system/vcs@dtrac
ERROR:
ORA-01033: ORACLE initialization or shutdown in the process ID: ID of Session 0: serial number 834: 139
SQL > conn system/vcs@dtrac
ERROR:
ORA-01033: ORACLE initialization or shutdown in the process ID: ID of Session 0: serial number 834: 139
SQL >
When I change dtrac2 instance in NOMOUNT or OPEN State, then connection correctly goes to instances that are open.
TNSNAME.ora file:
==================
tnsnames.ora # Network Configuration file: /oracle/db11g/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
DTRAC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = slpal05-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP) (HOST = slpal06-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP) (HOST = slpal07-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP) (HOST = slpal08-vip)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = dtrac)
)
)
DTRAC4 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = slpal08-vip)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = dtrac)
(INSTANCE_NAME = dtrac4)
)
)
DTRAC3 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = slpal07-vip)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = dtrac)
(INSTANCE_NAME = dtrac3)
)
)
DTRAC2 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = slpal06-vip)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = dtrac)
(INSTANCE_NAME = dtrac2)
)
)
DTRAC1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = slpal05-vip)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = dtrac)
(INSTANCE_NAME = dtrac1)
)
)
LISTENERS_DTRAC =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = slpal05-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP) (HOST = slpal06-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP) (HOST = slpal07-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP) (HOST = slpal08-vip)(PORT = 1521))
)
LISTENER_DTRAC4 =
(ADDRESS = (PROTOCOL = TCP) (HOST = slpal08-vip)(PORT = 1521))
LISTENER_DTRAC3 =
(ADDRESS = (PROTOCOL = TCP) (HOST = slpal07-vip)(PORT = 1521))
LISTENER_DTRAC2 =
(ADDRESS = (PROTOCOL = TCP) (HOST = slpal06-vip)(PORT = 1521))
LISTENER_DTRAC1 =
(ADDRESS = (PROTOCOL = TCP) (HOST = slpal05-vip)(PORT = 1521))Too bad, I was hoping that it would work with srvctl
[email protected] wrote:
As you say a different way of configuring the service by referring to the favorite and attributes available for instances, but its not useful to know the instances that are open. Its helpful to separate the work to specific nodes by creating different services for different applications.Certainly, it only would be logical if you know in advance that you want to start an instance in editing mode and you want to bypass the connection failure. But when you know you're going to just mount a database he used to try to find later.
I searched a bit on metalink and found notes 69546.1 which States that PMON will record with listeners the and remote start the instance, same no editing is required. Which is obviously stupid because of the error message you get when you try to connect.
797713.1 note describes your exact problem and a solution. I'd love to quote, but I'm not sure if this is allowed or not. So instead I'll summarize what I learned: the default service that you create during the installation of first CARS behave as in one instance. As soon as the instance starts, it will register with the other. This is actually intended for you can perform administration. When you create additional services via srvctl or crs, they will somehow managed by crs and only you sign up once the instance is 'up' (I guess they mean open).
So the solution would be to create another service through srvctl and use it for your connections.Bjoern
-
The OCSP server has no status for the certificate
From just today, whenever I try to access www.fanfiction.net, I get this error message from FF: -.
"Secure connection failed".
An error occurred during a connection at www.fanfiction.net. The OCSP server has no status for the certificate. (Error code: sec_error_ocsp_unknown_cert) "I already tried removing the Cert8.db and Secmod.db and uncheck only the two OCSP parameters d ' option in advance. Neither work. The site is accessible to any other browser so it's really Firefox question.
Need advice on how to fix this ASAP.
the issue seems to have been fixed by the site already, you can go ahead and give security.ssl.enable_ocsp_stapling to true.
-
I check on the status of the claim
I check on the status of the claim # 1112557863
Apple isn't here.
Username just like you who can't do anything to help you with the status of your application.
-
Before the last update Firefox, running on Ubuntu if it makes a difference, I was able to select close on the file menu (and if memory is also by clicking the x on the last tab) to exit an instance of Firefox open via file new window.
With the 9.x update this no longer seems to be possible. If I choose the file altogether starting an instance that was launched via the new window, all instances of Firefox away!
It's embarrassing because I have to leave all the instances that have been launched.
I tried closing last tab add on, and it allows me to close the last tab content but still leaves the instance running with a blank tab.
Is there a setting somewhere that I missed to restore the operating mode to exit the additional instances of Firefox without killing all the previous configuration?
Thank you
BurtEach window must have its own close button (big X in the right corner.)
But it depends on the 'Theme' that you use in Ubuntu. This large X chould be a round point when you hover over the color changes. It could be on the left instead of the right site.
This screenshot shows the close the left side, but always an X button.CTRL + SHIFT + W closed the window Active.
CTRL + W closes the current tab. -
Re: Satellite A200-23N - I need the program that displays the status of the battery
Can someone help me?
I need the program that shows me the status of the battery of the laptop
My laptop model is Satellite A200-23N.
Please I need help!Hello
What operating system do you use?
Usually in the taskbar, it is symbol of power, and if the laptop is running on battery power power move the pointer of the mouse over this symbol and info on the battery power will be shown. You can see how can % of battery power has. -
Satellite C55-A-1JL - 10 Windows sound driver - cannot create the instance of the APO
Hello.
I have Toshiba Satellite C55 - A (PSCGAE).
Yesterday, I've updated my Windows 8.1 to Windows 10 and install the drivers.
Version 1.2.41.0 of his Studio of DTS (32/64 bit).
When I try to open this application I have error: cannot create the instance APO.
What should I do?
You need to update the audio driver (I guess that your device uses IDT HD audio card)
But double check in Device Manager, then expand the section audio controllers, video and game to find out what kind of sound card you have.DTS Studio seems to be already aware...
So I advise you to go to the Device Manager and uninstall its drivers Associates
After reboot new, Windows 10 must check updates automatically... in case that it does not happen, you can try to manually start the update of the Device Manager. -
Is there a way to check the status of the battery on an iPad 4gen?
Is there a way to check the status of the battery on my iPad 4gen?
Make a booking Genius Bar at your local Apple store and they can run a free diagnostic on the iPad that will determine the State of the battery.
You will need for your Apple ID to make the reservation:
Maybe you are looking for
-
I downloaded the latest version of firefox and since then when I type a web address in the address bar, I can not only support on enter to get onto the site I want, instead, I have to use the mouse to point the arrow at the end of the address bar and
-
Wil Firefox won't open a new tab neigther with + or Ctrl + T
Wil Firefox does not open a new tab and more (manually).Not with the + on the site tabnor with Bestand - new tab or Ctrl + T
-
Satellite 5200 701 begins with SHLWAPI.dll error code
My Satellite 5200 701 comes with SHLWAPI.dll error code, thn stops. Any help would be grateful!
-
KB 2633880 update fails repeatedly
update fails repeatedly
-
How to fix blue screen with STOP: 0x0000007E (0xc0000005, 0 x 00000066, 0xba4dbc40, 0xba4db93c)