Stereo mix problems, Windows xp.

Similar Questions

• Do not allow for stereo mix in windows 7 on laptop Dell Inspiron 3521

  Hello

  I want to activate 'stereo mix' in windows 7 Home premium on my laptop Dell Inspiron 3521, 'sound' in the criminal, and then open control record tab, right-click in the window, I opened, it shows no "stereo mix" in devices either active or disabled, I have the latest audio drivers from the Dell website. Help, please

  Thanks in advance

  Make sure that the Realtek driver is installed. If it is you will then see the words "Realtel HD ' on your recording & reading tabs.

  If no luck with the latest Realtek, then try the older version. If still no luck then go to the Realtek site and get a "High definition" driver from there.

• Could not find a stereo mix with windows 7 and IDT High Definition Audio CODEC

  Can someone help me find the stereo Mix using Windows 7 with IDT High Definition Audio CODEC?   So frustrating

  Thank you

  You may have a corrupt user profile.
  Create a new administrative user account. Now log on with this new account.
  Are you able to see the stereo mix option and record yourself?
  If Yes, then you need to use the new profile of the user and the copy on your Favorites.

  First check if your computer is connected to a domain or a workgroup ?

  The padlock indicates that the account is protected by user name and the password .

  Click Start > right click on computer > clickProperties and check that your computer is on Workgroup or domain.

  If in contact with area: http://social.technet.microsoft.com/Forums/en/category/w7itpro, windowsvistaitpro, windowsxpitpro /

  Else If it's working group:

  Click Start > click on 'Network and sharing Center' > click'Advanced sharing Center' and Turn off password protection sharing and save the changes.

  After you save the changes, copy files to other user folders and check.

  Please let us know if a new account help with your question.

  Thank you

  Marilyn

• No stereo mix in Windows 7 Please Help!

  I have read all over the internet but none of the solutions help me. I use the stereo mix to send sounds on MSN using the record as well as the use of the mic button. The works of fine micro 7 and stereo mix used to work in Windows XP and vista, but now in windows 7 on the same machine (for laptop Acer 4420) there aren't no stereo mix. I go to the sound control panel and then do a right click and say

  Show disabled devices
  Show disconnected devices

  and everything that comes is the microphone monitor, card his microphone and line. I need to work under Windows 7 stereo mix.

  I wrote using the Council of responses of microsoft twice now and he ignored me, I asked on yahoo answers, they ignored me. I even wrote to realtek and they got ignored also twice now, I will communicate the better business bureau to complain about customer service, if I can't find a solution. I tried to find a solution for a month now!

  I solved the stereo problem. I went back to the H/P and asked them to fix it. and they updated the bios and updated audio driver. Lokks like is an older driver but it works fine and I have my stero return. The update of the bios is the solution, as well as to update driver.

• How to turn on the stereo mix in Windows 8?

  Former title: stereo mix

  How the stereo mix, or what you hear option in Windows 8

  OK thanks for your quick response

  Regret for taking the trouble with this issue but I have answers.

  This selection of stereo mix was not in existence, or I would have done it as explained. I know where and how to look.

  the really important information, I want to convey is the following.

  I discovered that's NOT at all a problem of Microsoft.

  What had to happen is to get a card sound motherboard driver update which adds this functionality (came out January 2013)

  Specifically Asus P8Z77 - V PRO

  This same question on the net on any available stereo selection showing in Win 8.

  Maybe for all we the same question about the driver updates (I'm not an expert), but maybe they could be pushed in that direction instead of win 8 corrects

  Good news is win 8 works like a charm and so far am in love!

• No stereo mix on windows 8?

  I went to my recording tab and showed "disabled devices" on windows 8... There is simply no stereo mix... How do I get it...?

  JS

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Lack of stereo mix? Inspiron 15R SE 7520.

  Hi guys,.

  I'm using Inspiron 15R SE 7520, I want stereo mix so that I can record the sound of the application.

  I checked on the 'Recorder' active option "Show disabled devices" and show disconnected devices". But there is still no "stereo mix". "." Only "internal Microphone" appear.

  even the steps of http://www.howtogeek.com/howto/39532/how-to-enable-stereo-mix-in-windows-7-to-record-audio/

  I even tried to reinstall the driver.

  but no luck

  BTW, my audio is Conexant HD Audio.

  I hope to hear from you guys. Thank you.

  Hi Jimco,

  Thanks for the reply! I finally found the solution!

  Actually, I need to change the driver to get the stereo mix. In my case, my driver file name is chdrt.inf

  There are these lines that disable the stereo mix

  ; HKR,%EPattributePath%\EpSettings\StereoMixEnable,enable,1,01

  ; HKR,%EPattributePath%\EpSettings\StereoMixEnable,MixAssocSeq,1,E0,E0

  ; HKR,%EPattributePath%\EpSettings\StereoMixEnable,MuteGainSettings,1,00,00

  Everything you have to do is remove the semicolon, it should be...

  HKR,%EPattributePath%\EpSettings\StereoMixEnable,enable,1,01

  HKR,%EPattributePath%\EpSettings\StereoMixEnable,MixAssocSeq,1,E0,E0

  HKR,%EPattributePath%\EpSettings\StereoMixEnable,MuteGainSettings,1,00,00

  then save the file, reinstall the driver using "Browse my computer for driver software". I got the stereo mix of baby! Whoah!

• stereo mix is available, but not sound in Windows 8

  I have a problem of Stereo-Mix with a new desktop computer Windows 8 HP.  The stereo mix is set as default in the HEALTHY management system registration window.  When I play something on the computer (for example a .wav file) there is no indication that sound is passed through the device of stereo mix.  In my old HP with Win 7 the stereo mix would sound played in the computer and I could save it.  Now I can't save it because the stereo mix does not sound on my machine Win 8.  My computer has Audio Beats control for the sound in the Envy Phoenix 800 computer.  Is there another setting I'm missing?  How can I get the stereo mix of the function?  Thank you. Ken

  No, I don't have any device Realtek on my computer; but my problem was solved.  Suggestions were made through all the Audio devices to manage and reduce the volume of unused devices.  I adjusted all the volumes in the audio device window of Windows (on record), Beats Audio window; refused to volumes that are not used for playback devices and checked my recording software - hearing.  It seems to work pretty well now.  Thank you.

• Satellite L750 - 170 Windows 7 stereo mix appears not

  Hello

  I searched for centuries about how to turn on my stereo mix and I can't just it get up...
  I installed the latest driver for my 'Conexant SmartAudio HD', you click on the "show disabled devices" and "show disconnected devices", and I always find myself with no stereo mix showing. I've got Stereo Mix on my XP, Vista, and my other Windows 7 PC before and I don't really know why it does not work on it.

  Help, please!

  Thank you

  From my experience the Conexant audio chip does not support this, but found this interesting thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=60471

  Check and test the solution provided do not know if this helps, but feedback would be greatly appreciated

• Stereo mix on Vostro Windows 7

  Hello

  I have a Vostro 3550 running Windws 7 64-bit.

  The stereo mix option is not available in the settings of the sound card. I've updated the drivers from the Dell website, but no difference.

  In the recording settings, the IDT High Definition Audio CODEC is marked as "not available".

  Is there a solution?

  Thanks in advance

  Bob755

  IM actually trying to find a solution equivalent to stereo mix to record audio streams.

  Rec.Playback records streams. You can only have one record source at a time, so be sure that nothing else is the default source, including microphones. If it still isn't available right click and look in "show disabled devices" to see if it is disabled.

• Satellite A300 - series stereo Mix unavailable with the Conexant audio driver

  Hello...

  I have laptop Toshiba Satellite A300 PSAJ0E...
  I was using Windows XP Professional...

  But I'm not able to use Stereo Mix so special...
  I installed the Driver Conexant HD SmartAudio 221...

  What can I do in this topic...

  I thank right now...

  Best regards...

  Unfortunately, but you can not do much
  The point is that it is a Conexant audio driver problem. This option or parameter is simply not available in the Conexant audio driver and as a result the port of stereo mix is not available and cannot be used.

  I don't think a driver update audio can help so expect an update.

  Cheers mate

• Record stereo mix Inspiron 7559

  I've had my Dell Inspiron 7559 since the eve of Christmas 2015 and I touch screen 4K i7 6700HQ 16 GB of Ram GTX 960 M 4 GB VRAM, 128 GB SSD, 1 TB HARD drive and I want to start with the minor problem on some pixels are blurred and the wrong color, I painted a single line shape free white paint on a black background and inspect the pixels close I saw that some pixels are turning green despite being supposed to appear white.

  And sometimes automatically screen adapts its lighting according to the color of the pixel range takes more space, for example to resize a window of (dark) steam will affect on the general atmosphere of the screen by slightly changing the color of the other windows, particularly visible with white windows.

  My main complaint is the following: I had a lot of trouble with the audio.

  I read that there are static pop noises there on many models, I have that too, then I noticed that I couldn't record while headphones/earphones were plugged into the output in January 2016 Jack with stereo mix, I have not tested if I still have the question now, because another problem came made me avoid a recording on your laptop

  When recording with stereo mix, even with improvements by maxx audio dell disabled, only the low frequencies are registered, either with Windows recorder or audacity store and I compared the spectra of the record that I did with stereo mix of the laptop 7559 and registration for the 7559 spectrum showed me only the low frequencies being recorded and my other pc , and he could be heard that only low frequencies had been recording, he gave the audio effect deaf when I read the record.

  I tried to uninstall the drivers, I do not remember how, but I managed to get it back for some time and I could save with good results until the problem is back for a reason which I am not aware of.

  The speakers saturate when there is low frequencies even at low-medium volume, and sometimes bass you hear about with some more complex pieces of audio.

  Video with audio recording with Nvidia shadowplay somehow works perfectly fine, despite the static noise pop and the poor quality of stereo mix audio recording

  I'm frustrated by the poor quality of the audio related applications, I had related graphics problems causing bsod drivers nvidia in late December and I had someone at Dell guide me through the possible solutions and I was very pleased by the quality of their support to this question, but now I'm afraid that my sound related questions cannot be resolved due to bad quality with drivers control software or devices.

  Again, I had indeed managed to restore the good quality recording with stereo mix but somehow after a while and after turning back on the pc as usual he re presented the problem and my recordings would only produce low frequencies.

  I'm waiting for answers, and I hope that I am provided with effective solutions, but above all a quality support.

  (I also consider ever buy a Dell laptop again)

  the guarantee remains valid until December 17th 2016

  Snipeinscientist

  ... I hope that I am equipped with effective solutions, but above all a quality support.

  I think that the best you can hope for is that we will try to help as best we can.

  Snipeinscientist

  I read that there are static pop noises there on many models.

  Solutions that offered owners are summarized in the FAQ Audio Choppy/jump. There are about 10 of them in the section Inspiron 7559. One owner had replaced "components."

  Snipeinscientist

  I tried to uninstall the drivers, I do not remember how, but I managed to get it back for some time and I could save with good results until the problem is back for a reason which I am not aware of.

  I could try all the different audio drivers for the i7559 and see if one of them fixes the problem. If we correct it, but the problem returns, one reason for this is that Windows 10 frequently "updates" of the system. [Don't think you mentioned is what operating system on laptop computer].

  Before you try the drivers, get rid of all the files of the Realtek driver on the hard drive.

  1. open Device Manager (found in the Control Panel, or type devmgmt.msc in the search box).
  2. expand the section 'Sound, video & game controllers.
  3. right click on "Realtek High Definition" Audio.
  4. click on "Uninstall".
  5. put a check mark in the option to remove the software driver, click ok.
  6. restart the laptop. Because you deleted the Realtek driver files, Windows will install its native audio driver, named "High definition Audio Device".
  7 go back to Device Manager and look for "high definition Audio Device". If you see "Realtek High Definition Audio" once again, this means that there is another version of the Realtek driver on your hard drive and Windows found and installed it. So keep uninstall & reboot until Realtek is no longer appears under his... Controllers and "High definition Audio Device" appears in its place.

  At this stage, go to the drivers Inspiron 7559 html page and download a driver for your operating system. Realtek audio drivers are available for the following 64-bit operating systems: Win 7, Win 8.1 (WB64A) and Win10 (WT64A). Start with the oldest one for your operating system, the test, then get the next more old ones. If you switch from the former to the most recent you shouldn't have to remove the files from the driver between the facilities.

  If none is satisfactory, you can also try one directly from the Realtek site.

  1. go to the Realtek download selection page. http://www.Realtek.com.tw/downloads/
  2. on the page, click on 'High Definition Audio Codecs.
  3. check "I accept", then "next".
  4. (optional) in the column named "Description" find the file named README and download it. Who has the instructions for the installation or update.
  5. in the column named "Description" select your operating system and if it is 32-bit or 64-bit of 2 choices in the list.
  6. in the column named "Download", click one of the server names to download the driver.

  Snipeinscientist

  (I also consider ever buy a Dell laptop again)

  It's just. I would say that, regardless of the brand or model of computer, test carefully while remaining within the return period and return if unsatisfactory.

• Can't see stereo mix on Dell Inspiron 7520

  Hello

  I know it is a problem that lasts for years and I googled and read a lot of forum posts on this topic but I still can't understand.

  I have a new Dell Inspiron 7520 and I want to use the stereo mix function, so I can record audio coming out of my Conexant SmartAudio HD card.

  I tried to open the driver and .inf file commenting on these three lines:

  HKR,%EPattributePath%\EpSettings\StereoMixEnable,enable,1,01

  HKR,%EPattributePath%\EpSettings\StereoMixEnable,MixAssocSeq,1,E0,E0

  HKR,%EPattributePath%\EpSettings\StereoMixEnable,MuteGainSettings,1,00,00

  I then go back into Device Manager and re - install the driver Conexant by accessing the location of the .inf file that I just edited (by removing the comments of semi-colons). But I get the error message: "Windows found driver software for your device but encountered an error while attempting to install it - Conexant HD Audio - the system cannot find the file specified. '. Just before I noticed it says that the driver is not signed, which could be a problem as I have Win 7 Home Premium 64 bit.

  Any advice greatly appreciated.

  I got it to work!

  The solution involves the file the modified driver .inf and re - install this file. Here, I explain what I did in case anyone else has this same problem. This should work for any Windows 7 64 bit computer with the Conexant HD sound card and driver Conexant HD even though I only tested it on my own computer.

  My problem:

  New Dell Inspiron 7520, Win 7 Home Premium 64 bit, Conexant SmartAudio HD sound card with the last driver Conexant Web Dell Drivers site. Stereo mix would not appear in Control Panel > Sound > recording even tab after a right-click empty space and selecting display disabled and show disconnected devices.

  Solution:

  Make sure that you install the Conexant HD SmartAudio driver. You should see it under the sound, video and game controllers in Device Manager. With the Conexant driver already installed and the key work is to find the exact location of the driver file. It can vary from one computer to another and also be called something else. Mine is called chdrt.inf and it was located in: C:\Windows\System32\DriverStore\FileRepository\chdrt.inf_amd64_neutral_fa34defac299c440

  If you don't know where your .inf file, you could do a search for windows for text in files of the string: EpSettings\StereoMixEnable. It will most likely be a file with a .inf extension and located in a subfolder of the System32 folder.

  Right-click on the name of the .inf file and select 'Open with' then choose Notepad. Press Ctrl + F and search for StereoMix to find three lines:

  ; HKR,%EPattributePath%\EpSettings\StereoMixEnable,enable,1,01

  ; HKR,%EPattributePath%\EpSettings\StereoMixEnable,MixAssocSeq,1,E0,E0

  ; HKR,%EPattributePath%\EpSettings\StereoMixEnable,MuteGainSettings,1,00,00

  Delete the semicolon-->; and save the file. However, Windows doesn't allow you to save the .inf file unless you change the permissions of files. It becomes complicated and a little dangerous!

  Basically a right-click on the .inf, then click these buttons/tabs... Properties > Security > advanced > owner. The current owner should be TrustedInstaller. Change this account on your computer that has administrator rights, and you can connect as long as. To do this, click on change and in the "change in ownership to:" field there an entry should be there as: Administrators (name\Administrators of your computer) to select that then Ok and apply and Ok to close the dialog boxes.

  Now right-click on the .inf again file: properties > Security > Edit > select "Everyone" in the "Group or user names" > check the corresponding box to 'Write' in the 'Permissions for everyone' section > press Apply and OK your way to close all the dialog boxes. Now you can save the .inf file, you remove the semicolons of!

  This step is VERY important. You must change the return of the permissions to the way they were. Right-click on the .inf right and as before changing the write permission by deselecting the checkbox for 'Writing', and then change the property of the .inf file back to TrustedInstaller. This time you'll owner > Edit > other users or groups and type NT service TrustedInstaller in the box and press on check the names, then Ok and apply your way out dialog boxes.

  Now finally, re - install the driver: here I had problems with the driver not being recognized and maybe it's because Windows 7 64 bit has said it is not digitally signed so here's what I did: Start Menu > right click on command prompt > run as administrator > type this command and press on... Enter bcdedit/set nointegritychecks WE.

  To install the driver: Device Manager > sound, video and game controllers > right click on HD SmartAudio Conexant > update driver software > Browse my computer for driver software > let me pick from a list... > Have Disk > Browse > now, here, you have to find the location of the .inf file that you just edited, in my case, I stuck in the path to the folder and press on enter then select the chrdt.inf file and click OK. When it was installed I went back to the command-line as before and run the command: bcdedit/set nointegritychecks OFF

  Now, I rebooted the computer and this time stereo Mix appear in Control Panel > sound > recording after right click tab empty space and selecting display disabled and show disconnected devices.

  Sources of info:

  "How to get stereo mix on SOLUTION Conexant sound card"

  forums.Toshiba.com/.../174656

  'How-to Configure System32'

  www.eHow.com/how_7625078_configure-system32.html

  "How to restore TrustedInstaller as owner of a file in Vista and Windows 7"

  www.Vistax64.com/.../159360-TrustedInstaller-Restore-owner.html

  "Windows 7 - turn off driver signing verification.

  en.kioskea.NET/.../3914-Windows-7-disable-signature-verification-of-drivers

• XPS15 L502x no stereo mix record or soundmapper

  Hi people, I have a brand-new XPS15 with config max... installed my Windows 7 ultimate, installed all the drivers of the resources DVD and now I have a problem that I can not record sound from internal devices. Record from microphone works fine, but the "stereo mix" is silent.

  I checked with my desktop PC also with the Realtek HD audio chip on board, and all parameters were similar. It seems that I have missed... the problem is not on the basis of the software, also the Windows audio recorder does not record the sound played.

  What should I do to get the sound from my internal sources? So far, I know that it is most likely a software problem.

  OK, I found the solution, seems to be symptomatic for Realtek HD Audio

  1.) right mouse click on the speaker through the screen symbol, then chose 'sounds '.

  (2.) it is the 'stereo mix' missing

  3.) right click in the empty box

  4.) enable "see the disabled devices.

  5.) appears the 'stereo mix', a brand says 'off '.

  6.) law of the mouse klick 'enable '.

  7.) REBOOT! IMPORTANT! WITHOUT NOT RESTART NO GOOD!

  Stereo mix 8.) is now active recording device.

  Most of the people think it's plug & play, but in this case, it's magic of Realtec that works this way. But it's easy compared to get the Latitude and other models with their its STM Micro card (requires the pirate ini file)

• After reinstalled Realtek HD Audio driver cannot turn on the stereo mix and the digital (HDMI) Audio option

  * Original title: NONE PROBLEM of SOUND WINDOWS 7

  I recently reinstalled my audio driver Realtek HD after a mistake and now I can not turn on the stereo mix on the tab "Recording" the sound options and even with the Digital Audio option (HDMI) who is apparently not plugged, I apparently tried everything and it's frustrating please someone help

  Also when I put my cursor on my sound option on the toolbar there is obviously a red cross on it and he said: ' no speakers or headphones are plugged 'r

  Aspire 5763Z it there is no trace of this model on the support site either UK or us Acer

  Usually the system for a laptop drivers are obtained directly from that manufacturers of mobile support site, unless the manufacturer specifically says to use windows update drivers