stereo recording via USB connection?

Similar Questions

• Trying to copy a video on my DVD recorder via AV connection with adapter. Audio is fine, but no video on the screen

  Trying to copy a video to my iPad Pro on my DVD recorder via AV connection with adapter. Audio is fine, but no video on the screen

  Which sector adapter are you using?  The digital adapter AV output is digital, which is not compatible with analog VCR.

  iOS: on adapters AV digital Apple

• Tab 2 A10 - 70F: Internet access via USB connected 3G / 4G device?

  Hello

  The A10 - 70F Tab2 has WiFi only. Is it possible to connect to the internet with a connected USB 3G / 4G? With other words: the tab can handle? Anyone with experience?

  Thank you in advance,

  Michael

  Yes is the short answer. And a few ways to do this:

  1 micro USB Dongle of 3 / 4 g

  2. micro USB to USB 'female' - then plug a 3 / 4 g USB Dongle

  And a couple of less obvious ways:

  1 WiFi connection to another mobile and use of mobile data of quotas (although plans only works on some data)

  2 micro USB to Micro USB and connect a mobile as shown above (does not work on all devices, although I look at the phone and tablet to fight for the battery juice is hilarious)

  3. connected to a PC via the cable USB/WiFi connection internet PC use.

  But yes, 3 / 4g Dongles work indeed & the Tablet seems to walk along very well with a micro USB version or a USB version with an adapter cable.

• {A} line recording via USB

  I have a N411z with a Conexant sound card.  I've updated to 8.54.45.0, A04.  Can I get this card to recognize an audio source via a USB port?

  Something like this audio interface Behringer will work.

  Here is an another Behringer interface that is very similar, but it includes a phono preamp built if you want to eliminate your preamp - one less device to connect.

• BlackBerry Smartphones via USB connection

  Not sure if anyone can help - I am running XP Professional at work and can't connect my "BlackBerry"BOLD"" to the Office Manager. I keep getting the message "USB device not recognized". There is no connection problem with my laptop under 'Vista' (Surprise surprise) and all functions are fine. Y at - it something I'm doing wrong - I reinstalled the software one or two times on the XP computer, but there's stillno link!

  Hi 707Rick and welcome to the forums!

  We can help you with that, but this forum is just for introductions

  Open a thread on the forums of 9000 "BOLD" and be specific about everything

  you have tried and versions of the OS etc. We can work on that.

  Ok?

  Thank you

  Bifocals

• Connect Sansa e250 to my audio devices via USB

  Hello

  Connect my sansa e250 to my Denon amp via USB only pieces of audio file of fixed drive will not play anything micro sd expansion port why? Using the sansa E250 01 software
  I would like to say good quality is achieved via USB and I can use the Denon remote

  When the sansa e250 USB connection port denon amp using rock box will not work
  Let's get only by jack stereo 1/4″ but will play music mm two disks

  Help

  Hello
   
  Yes, I should of said unit Sansa MSC mode, if I put in the MPT mode denon amp will not read the sansa e250 arrives with disconnection.
  I know that's not very common. I just bought a sansa fuse with more memory, but I was just wondering if there is any way to be able to have access to the micro SD and card.
  Thanks for the reply.
  Terry

• New smartphone BlackBerry storm not no projection in 'My computer' as a disc as my old Storm was when connected via USB cable

  I got a new storm that I see in BB Desktop Manager and see it of identification number and can see the contents of the 8 MB card, but I do not see the storm in my computer as a drive, as I have for my old storm when I connect it via USB cable.

  I used to connect my old Storm and autoplay would jump to the top and I see map of the storm and the internal memory as two disks support.  Nothing shows here now...

  I checked to make sure that autoplay is always set to "always ask" when my phone is connected.  I double checked to make sure that the new storm was set ON media, NULL encryption Support, ON Media transfer, Mass storage support, Auto enable Mass Storage when logged ON, etc.

  The card is fine, I've recorded videos, photos and play music off it all the time and I can transfer items to using very slow BB Media Manager but I prefer to use the quick method when it is recognized as a drive.

  Why it used to work on the old storm, but not on this new?

  I read on some other fourms when you think you've found a new replacement Storm you get really a refurbished and for some reason that those who have a whole mass storage setting where the mode is disabled?

  Storm 9530

  v 4.7.0.148 (4.0.0.181 platform)

  Thanks in advance for any advice I can get!

  Judson

  Before I had a chance to even try your recommendation, I found a link on these forums for this file that I mentioned.  I'll be darn it worked... now my BB appears in my computer under two drives, and Media Sync works!  Problem solved!

  It won't let me put the hyperlink to the forum page but a search for ' Blackberry Media Sync could not connect to your BlackBerry smartphone.

  So who has a link to the forums on pinstack.com and you have to register with them to get the file, and then extract the RAR with Winzip file and in this file, I ran the file BB"storage"Activation with the connected BB again, which opens a DOS command prompt, you hit then any key to continue, then unplug. , wait that the BB restart, then Viola... it works again!

  Judson

• I want to connect my Macbook Air (IOS 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear I

  I want to connect my Macbook Air (IOS X 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear as an option in the preferences/system sounds.

  Version 1.1.2.2 El Capitan driver support, then why don't upgrade you your MacBook Air to El Capitan?

• Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Try using using the Image Capture (in the Applications folder)?

• Why my iphone will have problems with pandora in synchronization with the pandora application on infotainment chevy via a usb connection?

  Why my iphone will have problems with pandora in synchronization with the pandora application on infotainment chevy via a usb connection?

  This was never resolved?  I have the same problem with an iphone 6s.  It is only my phone like an ipod playback.  I don't get the interface of Pandora.

• drive external hard connected via usb hub powered Time Capsule guard fall...

  Hello.

  Try using a player external 3.5 "connected via USB hub powered to my Time Capsule to serve as a backup Time Machine secondary.

  When I connect the external hard drive, it turns out, and everything seems good (Yes it is correctly formatted). I see the external hard drive in my time machine preferences panel and also the desktop browser window, etc..

  After selecting the drive hard as the second backup TM, I start TM. After a few minutes the backup fruitbodies. Audit of airport utility, the drive no longer appears in the profile of Time Capsule. I can't turn back the drive without unplugging / plugging the USB cord. I went to HD (WD green 4to) and HGST 4to - deleted both.

  What is the speaker (the box is powered)? Can you have a USB hub between the external hard drive and time capsuls? Something else?

  Just seems like something somewhere that expire, causing it to drop the connection...

  Thanks for your useful suggestions to fix this!

  Is your TC the Gen5, model AC?

  I must say that your experience is not uncommon. I tested it myself recently and was disappointed in how the poor reliability has been... Although not as bad as yours... in fact cutting in a few minutes to start a backup is ridiculous.

  What is the speaker (the box is powered)?

  Quality of the envelope varies a lot... What is it??

  If this is the typical brand X... Plug it into your Mac. is it reliable?

  Go to your control panel and dig up the actual USB chip used... I don't know if we can help on type a lot. But it helps us determine the fleas are a problem.

  I found the hard drive in the finder to mount helped... not the sparsebundle that must be mounted by Time Machine... but the disk must be mounted in the finder so that you can copy files back to him.

  I start TM. After a few minutes the backup fruitbodies.

  Check in the finder, it has created the sparsebundle and works.

  Can you have a USB hub between the external hard drive and time capsuls?

  It's our usual recommendation... but he won't always help... especially if the USB hub is another brand X...

  Note that all societies are changing USB tokens at the drop of a hat... some seller of a rival company arrives and offers them 1 c off the coast of 1 million chips it is common to spend even in the middle of a race. Even the tenors have no satisfactory fixed hardware...

  The computer has loads of memory... and may contain drivers for hundreds of different USB tokens... but the TC is a very limited amount of space and with questions if the driver is not fair.

  I started a thread for a database just now... has not progressed much.

  https://discussions.Apple.com/thread/5912861?TSTART=0

• The airport will connect to the brother 2270DW via USB but not ethernet

  Apple replaced my Airport Extreme after only 9 months and it has been quite a challenge to get back to square one.

  On the older airport, I connected to my printer wireless Brother via an Ethernet port on the router, but now it does not detect the printer. I changed the cables without result. I have finally connected via USB to the airport and wireless printing is restored, but why didn't he see my ethernet port.  The port works because I am connected via a cable to my laptop and it lights up. I have a problem with the port or printer?

  He does not see my printer via ethernet. What gives?

  Thank you

  Alexander

  You have entered the system preferences in printers and Scanners and added to the printer?

• omni to connect to pc via usb

  My omni will do not do anything with the usb connected to the pc in fact the pc recognizes even she or she see the external hard drive. Omni th has the same problem with the pc. Is that normal or what? I have no problem with my android device. I just photos of transfer at the omni for the wife see that she bought for her. Bravo, Laurie

  Your Omni is a 10 PC - all the appropriate options for sharing files and settings between PCs will apply to your Omni 10. Because your Tablet and PC are the "host" devices - only one can be responsible, is why they will not 'see' each other when directly linked together. The devices iOS (and Android) are more flexible and can function as host or client when connected to other devices...

  If you choose to use USB instead of sharing files on your network, you need to move your files back & suite via an intermediate device - USB stick, card SD or portable hard drive. Because your Omni 10 tablet can provide only a small amount of power to connected USB devices, "external hard drive" likely need to be connected to your Omni thru a powered USB - hub which can provide the necessary power to operate your drive when it is connected to your 10 Omni.

• OfficeJet 6500 E710n-z: where to locate X 86 Drivers for Win 7 to print Via USB system connected to the network using Win 8.1

  Since my computer can only connect to a printer wireless via USB, other computers on the network cannot connect to the printer.  The possibility of allowing other printers using the main system of sharing, I need the x 86 driver but cannot locate it on the HP support.

  Seems there are a lot of problems installing with HP systems, I would hope that society can give a high priority to these issues.  Many of us love quality HP but wireless connectivity is frustrating.

  In a humorous way, please remove the "cannot find the printer - make sure that the printer is plugged in and turned on."  statement.  Our children know how to set up a network, so that the statement is hilarious, until you see for the 20th time as possible motive to the wireless printer is not found on the network.

  Hello
  My post seemed to have grown to a case manager who was willing to put up a time for the members of technical support to contact me.  By the way, she asked about the distance, the printer from the router, which, by other reviewers, should be placed next to the printer, and she asked for me to try to move the router to about 18 inches from the printer so that it would be responsible for coordinating the call of support following our conversation.

  I did it and all network issues related to wireless access by the entire Office has been resolved and performing network and each station can print and scan in a few minutes, following a job application.  Printing took about 20 minutes to start and sweep was impossible until this Council been offered.

  Many congratulations to Yvonne!  And, I thank you for following up on this post.  I am a very satisfied customer again once my application has been met with personal concern for the issue and an appropriate resolution and FANTASTIC found!

  Thank you once again,

  Rick

• Is it possible to share a hp color laserjet cp2020 connected via usb to a 32-bit with a 64-bit PC?

  I have a client that is running a PC XP 32 - bit that has the Color Laserjet CP2020 connected via USB. It is shared on the network to the other PC, but I've recently upgraded to 2 PC for Windows 7 64 bit and now I can't connect the printer shared for them.

  Try the following: install the drivers for Windows 7 x 64 on your Windows 7 machine as if the printer will be attached locally.  Then on the Win 7 machine go devices and printers folder, add a local printer, printer, create a Port, Local Port, \\Computername\Printername (use the name of the actual share of the computer and the printer), OK, then select the cp2020.