{A} line recording via USB

Similar Questions

• stereo recording via USB connection?

  Hi all

  I'm a newbie on the audio recording and have what may be a stupid question.  Is there anyway to use two USB microphones for stereo recording via the interface USB (using two USB ports?) in Audacity?

  I have a Mac Mini with OSX 10.11.4 and use Audacity CS6.

  Thank you

  Kevin H.

  kjhart0133 wrote:

  Hi all

  I'm a newbie on the audio recording and have what may be a stupid question. Is there anyway to use two USB microphones for stereo recording via the interface USB (using two USB ports?) in Audacity?

  Audacity? Do you mean the hearing?

  I think you'll have a little difficulty to do this anyway, as the clocks of scanning in the pickups will not be synchronized. Which means that even if you can get two of them work, elimination will be in every sense. You can persuade two microphones to work at the same time without too much difficulty, but this only works if you have two independent sources that do not have to have any kind of relationship of phase, and it is the relationship of phase which actually do stereo work.

  There is, as far as I know, only decent stereo micro USB, and the Tricapsule Yeti, one blue. It crosses all phase problems in having everything digitized by the only encoder, so all the problems of phase are sorted completely.

• Control external synth MIDI via USB keyboard controller

  Friends,

  I'm trying to get a Novation Launchkey 25 to work as an external controller for mother-32 MOOG synthesizer.

  Software - Logic Pro 9

  USB - LaunchKey 25 Novation keyboard controller

  Interface - Focusrite Scarlett 18I6

  MacBook pro with current operating system

  Currently I have the out of the Focusrite and towards the MOOG MIDI cable. The Launchkey is connected via USB on my Mac. Logic can see the keyboard and interface, but not the MOOG. I just want to control the MOOG mother 32 with the keys. I am at a loss on how to implement the logic. Any help would be greatly appreciated.

  Thank you

  Steve

  1 MIDI OUT of the Focusrite at noon on the MOOG.

  2. create an external MIDI track with the release (in the Inspector) on the MIDI OUTPUT Focusrite. Also assign the desired MIDI (or ALL) channel. Better, the use of the channel the MOOG is set up to receive on.

  3 connect the headphones to the MOOG, to see if it is audio output. To get the audio MOOG through logic, you should run the audio Moog in the Scarlett outputs, create an Audio track, the value of channel inputs inputs use the MOOG, the value Preferences / Audio monitoring software allowed to logic. Allow recording the audio track. You can select two tracks (Audio and MIDI external) using shift/select, if necessary. Audio will come from Scarlett.

  It is another way to analyze using a plugin, get that first day.

• Satellite M70-339 - not possible to record via mic internal

  I have a Satellite M70-339 (running XP home) not recording via internal microphone

  The internal michrophone detects no voice - no wavy on sound recorder and Skype line not to pick up my voice, yet the device manager tells me that it works properly and the microphone is selected in audio and audio settings.

  Are you really sure that your model of laptop has an internal microphone? I have the Satellite M70-159 and there is no internal microphone.

• Training of W450 not appearing is not on the website after synchronization via USB (4.55.97)

  Hello guys

  Last night I updated my W450 8 GB US yesterday to 4.55.97 through my Mac at home - he crossed without incident. Today I took for a race and then wanted to synchronize the workout on the site via the USB connected to my PC at work. The Motocast software did his thing without any error. Then I went to the site to view detailed information about the race, but the training was not there (I can still see it on the camera itself however).

  This process tends to work for me before, why it would not work anymore?

  There are a few problems of complications:

  (1) update 4.55.97

  (2) it was the first time I ran with my new Garmin HR strap

  (3) synchronization via USB via the PC at work, while I use Wifi at home

  (4) my last training always in the Web of W450 (account LahmeEnte79) site is a workout elliptical incompatible ("workout contains all the raw data"), that I can't delete somehow.

  Is there a way to define a workout on the device as "unsynchronized", so we can download it again?

  PS my boyfriend jogging today ordered a Garmin EN 910 last week; He regretted that powerfully after seeing the W450 :-)

  See you soon,.

  Michael

  Problem solved thanks to Matt: turns out the problem was the date being set to one day earlier. After recording a workout and wait 24 hours, they have appeared on the site W450 :-)

• DCR-TRV260 NTSC via USB for Windows XP Home edition home

  Hello!

  I'm trying to help a friend to connect its DCR-TRV260 NTSC to his computer HP Vectra VL420 (Yes, a very old machine).
  The computer is HP P/n: PS660AV #246, with a processor Pentium 4 (Willamette) of 478mPGA socket @1. 70 GHz, installed on a HP
  card system with an Intel i845 NB A05 and and Intel 82801 SB, the latter is, I suspect, the culprit.
  We lack a clean new install of Windows XP Edition family with Service Pack 3, with 384 MB of PC133 SDRAM.
  I know it's something Museum but hey, it works and it can not even buy a more recent machine.

  The problem: I can't do the camera be considered a via USB removable storage device, in order to download still images on the computer, he recorded on tape, not a stick of memory, there no card IEEE1394 and no budget to buy a.
  I installed the software included in his CD that comes with the camera, and I can work
  streaming USB tool and watch motion pictures and still images through it, but I can not D/L to the computer.
  I removed all the foregoing, as well as all instances of the camera Device Manager, then set up PMB56_installer1108a, to my dismay, because he wants to only use IEEE1394 (I understand why, but it should offer the USB option).

  How we manage to always download these images, recorded on tape, on his computer?
  I suspect the Intel 82801 SB is at fault, because even if it does not detect the camera and every time I plug it, Device Manager
  updated to reflect the three instances related to the camera, the Sony imaging device, digital video USB Composite and Audio USB
  Device, it cannot be seen as a removable storage device.

  Of course, I read the manual for the camera and the computer application s/w, but I can't find anything related, none of the people
  two elements indicate how do what my friend waiting!

  I read all the messages mentioning USB as a search term, and the question is: is WXP just incapable of such a feat?

  Help, please.

  Hello!
  After all this time, I discovered the answer to watch me on page 25 of the PDF manual camera operations.
  They are not always photos within the meaning of the word "cybershot", they are
  still images recorded with sound, then it's just a frozen video image recording with
  seven seconds of audio.

  Now we have captured it with Windows Movie Maker and export it somehow to jpg still images.

  Thanks anyway!
  (Someone has already read the post?)

• FLIR T600 via USB

  Hello

  We have the camera Flir T600, the Flir Toolkit (3.3.10) for Labview (2014) and the Flir SDK. The camera can be connected via USB. I also tried to install IMAQ, but I can't find the tools in Labview, the tools in the Toolbox are there. Do I need IMAQdx or full Service for this camera or is IMAQ enough? How can I get the tools?

  I want to get images or record a video, to define points of measurement and read the data.

  Thanks for your help!

  OK, this information brings light into the issue.

  The NOR-IMAQ driver must appear in LabVIEW in the palette "Vision and movement." See screenshot.

  

  The latest version of this driver with support for LabVIEW 2014 can be found here:

  NEITHER Vision Acquisition Software February 2015 - National Instruments
  http://www.NI.com/download/NI-vision-acquisition-software-February-2015/5149/en/

  The Acquisition of Vision Software provides the NOR-IMAQ, the NOR-IMAQdx and NOR-IMAQ to IO driver. You can tell the installation program to install only the NOR-IMAQ. It is important to tell the installer to install support for LabVIEW 2014 (the screenshot is a different version of the installer, so don't be confused).

  

  You can not find the palette IMAQ in LabVIEW?

  Stephan

• D1370 "Scan type not the Remote Scan value... "Why this error when connected via USB

  Printer D1370 MF w / usb on win7 x 64 machine connection.

  I understand that when networked, I owe to the printer and manually press , then then before you scan using the software MF Toolbox on my PC and then must go to the printer once the scan is complete and cancel this setting manually before I can print or use other functions. What is total pain BTW...

  However, I also have a MF6530 and can scan directly from MF Toolbox without manually change the setting of the printer when connected via USB.

  So, I would like to connect one of my PC via USB for scanning to eliminate the requirement to manually configure the printer for the mode. But, when I do this I always get the error "type of analysis is not defined for [Remote scanner] on the device" even though I am connected via usb.

  1. I do something wrong when I try to scan via a usb connection that causes the error "remote scanner?

  2. that this has something to do with D1370 being a network printer. My MF6530 isn't a network printer.

  3 is there a manual for the software MF Toolbox? The manual on the installation disc is for 'Send email' and 'Store to Shared Folder. The manuals provided in the box do not address MF Toolbox. There must be a detailed operating manual provided by Canon for this program?

  4. What is the error Code 162,0,0?

  5. where is the complete list of the error codes for MF Toolbox.

  6 help!

  Hi monza.

  I know that this issue is frustrating and I'll be happy to help you.

  The new imageCLASS machines are designed so that you can select an option to scan the machine.  There is no way to set a default scan on this computer option.  You will need to select [Remote scanner] or [computer].  This is to ensure that your device correctly handles the scan project.  For this reason, the ability to program a specific mode is not available.

  Although an extra step to make, an advantage to choose the mode desired for a respective scanning can ensure that poor communication of scanner does not occur if it was programmed to a different mode.

  The 162,0,0, the error indicates the Toolbox does not detect the scanner mode "Remote Scanner.  Scanning is not supported with a connection on the USB hub, as the hubs can cause communication problems, trying to transmit data to the computer.  We recommend a direct connect between the printer and the computer.  Once you have connected the printer directly, perform the following steps and check if you receive the same error 162,0,0:

  1. Check that the MF Toolbox is closed on the computer and press the [SCAN] button on the printer.
  2. Select [Remote scanner], then press [OK].  The display reads, "remote scanner. Waiting in line... ».
  3. On the computer, open the MF Toolbox and select [PDF].
  4. Click the [START] button green on the window [PDF].  The machine begins to deal with the scan.

  Then I recommend to download and install the e-manual for the device to your computer.  It gives very detailed instructions on each of the functions of the machine.  The e-manual should be included in the manual on CD-ROM supplied with the machine.  If you are unable to access it from there, please click the link below to download the electronic Handbook:

  imageCLASS D1370 - Brochures & manuals

  I hope this information is useful for you.  However, if you need more assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

• the installation files that are necessary to control a 33210 agilent has via USB

  Hello

  I'm trying to control agilent 33210 via USB to a produce an arbitrary waveform using labview. The installation files I need? Obviously labview 86, ivi specific driver for 33210a, and? After you install labview 86, the program prompted me to install pack pilot devices, which I did, but he asked for disk 3 that does not exist in the package, I downloaded on ni.com.

  BTW, is there a guide on where to go from there? I'm more c/matlab programming and graphic...

  Thank you very much

  Hi User2009,

  Once you have installed LabVIEW and NI-VISA, you can do the rest of LabVIEW.

  The simplest process is:

  1. Go to tools' Instrumentation' find instrument Driver and to use the finder driver tool to download and install the appropriate driver (I recommend getting the pilot LabVIEW Plug - and - Play project).
  2. "Once you have installed the driver open the example finder and navigate to hardware input and output" Drivers of instruments ' LabVIEW Plug and Play and find an appropriate example.
  3. Select your device and run the example to make the work of communication course.
  4. Use the example as a starting point and make any changes you need.

  I got to have an Agilent 33120 at my office, so I recorded a quick video for you to the process described above.  I use GPIB, but the process must be the same for USB.

• install app via usb error on first installation poster

  Hi all

  I install my app via usb and when I install the first error I get below...

  "

  Error in the final launch sequence

  Impossible to prepare and upload the binary file

  Could not locate the application process. The application may not have launched successfully. Please check the device for pop up windows or newspaper of records relating to this issue. »

  and when I reinstall again the error is gone and it works very well...

  any help in this regard will be greate,

  Thanks in advance...

  The first time you run the application, he was arrested at the start while the permissions screen is shown.  After accepting the guest of permissions, the application runs.

  You see she comes after the expired debugger trying to connect to the application, which was probably interrupted while the authorization screen was exposed.  This screen is not shown beyond the first launch.

  If you accept the permissions quick enough you can ignore this error in the first inning.

• New smartphone BlackBerry storm not no projection in 'My computer' as a disc as my old Storm was when connected via USB cable

  I got a new storm that I see in BB Desktop Manager and see it of identification number and can see the contents of the 8 MB card, but I do not see the storm in my computer as a drive, as I have for my old storm when I connect it via USB cable.

  I used to connect my old Storm and autoplay would jump to the top and I see map of the storm and the internal memory as two disks support.  Nothing shows here now...

  I checked to make sure that autoplay is always set to "always ask" when my phone is connected.  I double checked to make sure that the new storm was set ON media, NULL encryption Support, ON Media transfer, Mass storage support, Auto enable Mass Storage when logged ON, etc.

  The card is fine, I've recorded videos, photos and play music off it all the time and I can transfer items to using very slow BB Media Manager but I prefer to use the quick method when it is recognized as a drive.

  Why it used to work on the old storm, but not on this new?

  I read on some other fourms when you think you've found a new replacement Storm you get really a refurbished and for some reason that those who have a whole mass storage setting where the mode is disabled?

  Storm 9530

  v 4.7.0.148 (4.0.0.181 platform)

  Thanks in advance for any advice I can get!

  Judson

  Before I had a chance to even try your recommendation, I found a link on these forums for this file that I mentioned.  I'll be darn it worked... now my BB appears in my computer under two drives, and Media Sync works!  Problem solved!

  It won't let me put the hyperlink to the forum page but a search for ' Blackberry Media Sync could not connect to your BlackBerry smartphone.

  So who has a link to the forums on pinstack.com and you have to register with them to get the file, and then extract the RAR with Winzip file and in this file, I ran the file BB"storage"Activation with the connected BB again, which opens a DOS command prompt, you hit then any key to continue, then unplug. , wait that the BB restart, then Viola... it works again!

  Judson

• Speakers for iMac via USB Dongle

  So, I bought a USB 3.5 mm dongle so that I could connect the external Boston CR6 speakers to my iMac. I get sound but it is pretty low. The volume level is the same if I plug the 3.5 mm plug into the hole in the back of the iMac.

  I think it is a difference of impedance, or the iMac does not have enough juice to power the speakers (which are actually very small).

  Is there anyone driving experience of the external speakers, via USB or directly via the 3.5 mm to 3.5 mm port? I will order a small amp if that's the problem?

  Maybe audio HDMI or optical has more power? I don't see a spec (which I understand).

  10.11.6 running.

  Thank you.

  FWIW, most if not all sound cards were never intended to push the non-powered speakers. That's why most of the 'computer' speakers are powered. You will need amplification of some sort.

• iPhone 5 c will not charge via USB on the laptop?

  Hi all.

  I have an iPhone 5 c and as about a week ago, does not charge via the USB port on my laptop. He sees very well in my wall sockets and Sockets USB as well, but not in my laptop. I have an Acer laptop running Windows 7. Windows is up to date, iTunes has the latest version installed. Whenever I plug in my phone, one of the following conditions occurs:

  (1) does not have

  (2) noise "plugged" USB lights, the window on the lower right, tell that a USB device has malfunctioned

  (3) (rarely) of phone calls after I tried several things

  What happened is I would plug my phone, she would charge via USB, iTunes opens automatically, and "trust to this computer" popup would come on my phone if I had unlocked it. None of this is happening now. I did the following to try to remedy:

  (1) power cord iPhone replaced (it was time for a new anyway)

  (2) uninstalled and reinstalled iTunes

  (3) restart computer and phone probably 29856 times

  (4) device Manager... nothing comes up at all, not even the unknown device. RARELY the unknown device comes up, then I get a "Code 10: this device cannot start" error, but it is * in a handbasket just trying to get to THIS point! and IF I do what they say to do to correct a code 10 (uninstall all USB and restart the computer, then USB devices hook to the top one at a time), so I'm now at my problem of a communication that don't meet pluse between my phone and PC

  5) tried to the registry editor, but not "upper filters" option rises

  (6) virtually every other option on this thread of 5 pages iphone not recognized by Windows 7

  Help, please?

  The USB port of your laptop does not provide sufficient power to recharge the phone. It is a hardware problem with your laptop, not the phone.

• Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

• Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Try using using the Image Capture (in the Applications folder)?