Still 2 WT8 - B USB do not work

Similar Questions

• USB ports not working do not. Pavilion dm4-3090se

  USB ports not working do not.

  Thanks for your reply.

  no ports were working, so I went into Device Manager, uninstalled them, re-started... and... iola!

  they were back!

  Thank you again for your answer...

  Louise

• Satellite A200-1tw psae6e - USB ports not working not

  I use windows 7 ultimate on Satellite A200-1tw (psae6e-06u030du) and my usb ports no longer works correctly.
  In fact they recognize certain usb devices, but not all (for mouse and printer example work, but my USB does not work)

  Looking at the Device Manager, everything seems OK... No problem!

  Does anyone have a solution for my problem.

  Thanks :)

  Hello

  Try resetting the USB ports. This means that you need to remove the USB ports/hubs/controllers in Device Manager.
  Then, you have to restart the laptop to get new USB ports.
  In my case it has worked.

  By the way; I recommend upgrading the chipset driver and disable the feature for each energy-saving usb port.
  This can be done in the Device Manager-> port USB-> properties-> tab to save energy

• SA30 USB do not work after reinstallation, please help!

  Hi, my SA30 USB does not work after reintalling, I don't have the original CD with the phone because it was a gift from my friend... I couldn't find the driver from the website, please could someone help me?

  I could use the USB mouse, but when I plug the external hard drive, he has no answers, I tried to get some new material, it could not detect it. Any information would be welcome, see you soon.

  When install you an OS other than the OEM OS recovery, you need to install the drivers and tools in a right order!

  This command is on the Tools & Utilities CD in a html file! When you follow these order all material must be detected!

  Also you can go to http://eu.computers.toshiba-europe.com and download the drivers

  Hans Bye

• Peripheral USB do not work correctly on the Satellite M40 313

  I have a Satellite M40 313 I bought there are about 1 1/2 years and have had some problems with.

  However, I recently bought a Canon S3 IS and a Buffalo portable HD here in Japan, where I currently work.
  These two devices do not work with my computer.

  Attach the HD produced the message that this device will work better with a USB 2.0 high speed Port, before XP decides that the HD is actually a keyboard HID device! The camera mount, for which I had installed the software provided, will produce a message that suggests that I have install usbscan.sys file and forces me to use a driver of generic digital camera that does not work with the Canon camera.
  I fetch the requested file, but it made no difference...

  It seems that it is a problem of USB, and I also noticed that some of my friends devices USB do not work well with my computer.

  In this case, what is the best way to update my software so its compatible USB? Have I been dismantled down to the USB 1.1 version by WIndows at any given time? The pilot on the hub root 5.1.2600.2180 and is dated 07/01/2001.

  Any suggestion is appreciated.

  Hello

  Perhaps a biosupdate could help you? I mean it s do not know if is it a hardware problem or software, so that you can first try to check if it s a software linked history by:
  1.), updated the Bios
  2.) recover the system with the recovery cd (backup your data first!  ;))
  3.) install the latest drivers (do not install MS updates or patches, sometimes they cause errors)

  If you have no success after completing these steps, and then give a few comments.

  Welcome them

• my super USB does not work after last update OS EL Capitan

  my super USB does not work after last update os el capitan

  Hi viral_02,

  The resources below provides a few for the SuperDrive USB troubleshooting steps.  Click on the link to see all the possible symptoms and solutions, including resetting the system management controller.

  Get help with the SuperDrive slot on your Mac computer loading

  If the problem persists, Contact Apple or an provider of services authorized Apple, or make an appointment with an Apple Retail Store additional diagnosis, evaluation, or service.

  Take care

• I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7

  I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7.

  Hello

  And much more: (XP mode requires professional, Ultimate or Enterprise).
  

  Get all the benefits of Windows 7 and continue to take advantage of your investments and more
  business and productivity programs that require a PC running Windows XP.

  Note: Windows XP Mode requires a download.
  http://www.Microsoft.com/Windows/Windows-7/features/Windows-XP-mode.aspx

  Windows XP mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode is supported through Technet

  TechNet - Forums - Windows 7 virtualization
  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Toshiba still WT8 - restore procedure does not work

  Hello

  I recently bought a Toshiba still wt8 with 2013 preinstalled office student.

  The desktop application will not install with different messages about problems arise.
  the last message says that it can not download because it is not connected to the internet, even if it is

  In the following advice on the setting of the installation of various forums, I now have a machine that needs to be reset.
  The road to restore installed does not work because it says that the files are missing.

  Ive created a recovery disk (possibly after you buy a micro USB key).
  but now when I try to use it, it indicates the recovery drive is not valid.

  I've had the unit for four days now and I have yet to be able to use for anything other than making circles of frustration.

  Can someone help before I completely lose my sanity?

  Thank you
  Nick Chablis

  Hello

  Usually you have two options to restore the system.

  (* 1) * you will need to create a recovery media and could use this recovery media to restore the system
  (* 2) * you can restore the software preinstalled from the recovery partition

  (* 1) * before using the recovery media (USB flash memory stick), it must create a. The recovery image is stored on the dedicated recovery partition. And can be copied to USB flash memory by following the steps.
  -Turn on tablet and allow it to load the Windows OS as usual
  -Insert the USB micro-USB port (do you need a micro USB cable USB converter) tab (under System Windows Apps view) Control Panel
  -tabs and system security-> action center-> recovery-> create a recovery disk
  -then you must follow the instructions on the screen to complete the recovery media

  To recover the system USB flash stick insert. Then put ON the table (charm settings-> power bar-> stop) after the tablet was turned off the POWER, wait 10 seconds, then press and hold the power button / stop and the volume button up until the start menu is loaded. Then use the volume up/down button to select the menu to your actual recovery media option and press the Windows button to confirm. Then a menu appears, where you must follow the on-screen instructions.

  (* 2) * the 2nd option of restore partition recovery is also possible.
  Stop the tablet. Press and hold the power button / stop and the volume button up until the start menu is loaded. Then select HARD drive recovery. Now press Yes, select troubleshoot, select Reset your PC and follow the instructions on the screen to complete the process

  Alternatively, you can perform the restore through laptop settings in the operating system. (parameters-> change PC settings-> update & Recovery-> recovery)

• Zbook G3 HP: HP Zbook Thunderbolt 3 Dock USB ports not working not

  I have a HP Zbook Thunderbolt 3 dock on my HPZbook G3.  I've recently updated the BIOS and the firmware to the latest version to solve other problems 'dock '.  Am now at the latest for both.  The two monitors and ethernet on the work of lightning 3, but none of the USB ports are active.

  I am sure that the USB ports work, because they used to work before the update BIOS and firmware.  Keyboard, mouse, or USB memory on the dock work.

  I tried to go to the HP support and install the updates with the USB in it, but it didn't work.  I have a workaround - just connect the laptop directly, but I'd like to get my fully functioning dock.

  Device Manager does not display devices with questions.  I'll try to update, but I don't know which one to look at.

  

  Hey people,

  HP is dedicated to providing quality products to meet the needs of our customers. We listen to the customer feedback on our recent Thunderbolt Dock for use with the latest products ZBooks, and Elite Notebook. We continue to work with our customers to solve problems.

  Please find tips and updates to improve your use of the HP Thunderbolt docking station.

  1. The Thunderbolt dock uses the latest technology thunderbolt. To be fully functional, it takes the latest firmware, BIOS, and drivers to work properly. Please follow the step by step process as described below in "The process of updating your device".
  2. Here are links to the user, technical white paper guide helps and guides troubleshooting. Please, use them to help when you have problems after you have fully updated your device and platform by following the instructions above. Please note that you may copy and paste the links in your browser.
  3. If you still have any questions, please call HP support. We're here and eager to help succeed you using the HP docking station new Thunderbolt.

  Useful links

  User Guide: http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=11122586 & docLocale = en_US & docId = emr_na-c05141189

  Technical white paper: http://www8.hp.com/h20195/v2/GetPDF.aspx/4AA6-5088EEW.pdf

  Help & troubleshooting the Dock: www.hp.com \support\thunderbolt3dock

  Process to update your device

  NOTE: Instructions below is found in the User Guide "Getting Started" to "Implementation of the dock" to "step 2: update your computer.

  Before connecting the dock to your computer, update the BIOS, software and drivers on your computer.

  NOTE: If you do not, the wharf may not work. For best performance, keep all software and drivers on your computer up to date. (See table 1)

  Update the BIOS and the software and drivers:

  1. Go to http://www.hp.com/support. Select the drivers and Get software, enter your model of computer (on the computer service tag) number, and then select search for my product.
  2. Click the link for your specific computer, select your operating system and then download the latest version

  BIOS, software and drivers as follows: Intel® Thunderbolt Firmware Update Utility, Intel's Thunderbolt

  Secure Connect Driver, graphics drivers, ASMedia eXtensible Host Controller Driver, Broadcom Ethernet

  Controller and driver Conexant USB driver.

  1. Install the latest version of the BIOS.
  2. Restart the computer.
  3. Install the last stroke of lightning Secure Connect driver Intel.
  4. Restart the computer.
  5. Install the latest Intel Thunderbolt Firmware Update Utility
  6. Restart the computer.
  7. Install any remaining updates in any order. Restart the computer after each update.

  Table 1

  For the products supported Thunderbolt Dock all HP
  Name of the component	Category on the Support Page on hp.com	Where to check (this applies to all laptops)
  BIOS	(BIOS)	BIOS F10 Setup to information system
  Intel's Thunderbolt course connect driver	(Pilot - controller)	Right click on tray icon Thunderbolt to settings for details.

  The Thunderbolt of Intel® firmware update utility

  (Firmware)

  Right click on tray icon Thunderbolt to settings for details. Note that the numbers on the left will not directly reflected. NVM Firmware Version: 16 PD Firmware Version: 1.07.03

  Intel Graphics Driver

  (Driver - graphics)

  Right click on the desktop to graphic properties (icon intel) Options & Information Center Support.

  NVIDIA graphics driver

  (- Graphics - Nvidia driver)

  Right-click on the desktop to NVIDIA control panel to information system at the bottom left.

  AMD graphics driver

  (Driver - graphics)

  Right-click on the desktop to graphic properties (top) to Information to software.

  ASMedia eXtensible Host Controller Driver

  (Driver - Chipset)

  Programs & features or the Device Manager to Universal Serial Bus Controllers (dock of needs to be connected).

  Of Broadcom Ethernet controller driver

  (Driver - network)

  The Device Manager to network adapters (dock of needs to be connected).

  Conexant Audio Driver USB

  (Audio - driver)

  The Manager of devices to sound, video and game controllers (dock of needs to be connected).

  BPPSQ-

  I work on behalf of HP

• Satellite Pro L10-103 - USB ports not working not

  Hi, my Satellite Pro L10 - 103 USB Ports do not work. I tried different things and finally my Advisor rubbed my computer clean of all programs and operating system. After reloading of the set up disc and having lost my dear some programs I am no further forward. It still does not.

  Anyone know if this means that it is a mechanical problem with the computer? (I use Windows XP). Your help would be greatly appreciated.

  Hey Buddy,

  As wrote Akuma did you use the Toshiba Recovery disk or the Microsoft Windows disk?

  After installing XP, make sure that Service Pack 3 is installed. It contains important updates and can be downloaded on the official page of Toshiba.

  In addition, try to remove all the USB ports on the Device Manager, restart the computer. Ports will still be recognized and ready to use once.

• HP Pavilion DV7 2270us: USB Ports not working on HP Pavilion DV7

  I get the USB device not recognized on all USB ports on my laptop.

  I am running Windows 7 (recently did a restore to clean computer) service pack 1.

  I refreshed the BIOS

  I tried to remove all the drivers, stop, remove the battery and restart

  I tried refreshing all USB drivers

  I tried to adjust the power settings to make sure that all power mode on the economy USB devices has been disabled

  Still no luck. From time to time I can plug something and it will work a bit then it becomes disconnected. I think this could be a hardware problem as no intervention software worked. All advice appreciated!

  Miranda

  @mdiakiw ,

  Hello and thanks for the display on the HP support forum.

  Thank you for the great information you have provided to us.  I agree that you did already that you are looking at a hardware problem.

  It seems what's your connection and once the jury warms the connection develops and is then broken.

  The next step would be to contact the helpline for repair options.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I thank you again for posting. Have a great day.

• USB does not work with flash or usb HD drives

  Lenovo T60 with XP Pro. USB flash drive appears in my computer, but must be formatted. If I click on the message in the format software generats the reader would noy be formatted. In properties-> volume are not met. If I click on fill to field will fill with the correct information. After OK everything will be gone. On an another identical T60, everything is OK. In the Manager of-> / place - >... it shows the correct information, the disk is online. Change the letter has no effect.

  With USB HD even more interesting. A (350 GB) HD looks like 3 disks: 2 small HD and one HD unallocated. Yet once, it looks like 1 hd if I connect to other computers.

  Mouse and keyboard work fine.

  I cleaned the reg. for usb devices. After that, if I insert the USB XP key will be detected and will show message that new hardware installed and ready. However, it does not work as I described above.

  I appreciate all the comments

  Hmm,

  In this case I have to reformat all of my usb drives and usb HD even all of them are OK if I use other computers. I'll try it, but this isn't a solution. USB is not a big problem, but what is on USB HD?

  Yes, I get you. Try it on the USB first just to see if it solves the problem. The question is of course with the Windows installation and how it's the disc but, re-setup of can not solve. This way if you still experience the problem after formatting the flash drive you will be one step closer to understand the issue.

• Pavillion TS 14 Notebook PC: USB Ports not working not

  Hello. If there is a moment, 2 / 3 USB ports on my laptop doesn't work anymore. There are 2 USB ports on the left and one on the right. The right one is the only one that still works. I decided to start a diagnostic test HP USB ports that do not work and I got the error Q4XBL1-78J89Q-MFPV6J-8D7KO3 code. I ran the test both of the ports and both came with the same code. Can someone please tell me what this code and what to do about the problem?

  Help would be very appreciated.

  Sorry, but this is the only port on the right located on a daughter card.

  Manual

  2 ports on the left (which are the only USB 3.0 ports) are part of the motherboard and their fixation would mean replace the motherboard. See the diagram on page 76 that shows the usb ports in the system (mother) board left. The only other explanation is that USB 3.0 driver is not installed right but if that were the case you would not get the error of diagnostic test on the ports.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• USB ports not working not online when using wireless

  Hi, I use windows vista Home premium on a Fujitsu siemens Amilo laptop.

  Until yesterday, I always connected to the internet via a direct connection with my router. Now, however, I have have a direct link and can only connect to the internet through a Wi - Fi

  As soon as I logged online, all my usb ports stop working... I mainly use my mouse and my web cam... the cam sex is essential for my communication with my wife living abroad... Try as I might, I can't get the laptop to recognize any usb... as soon as I'm online... That is to say the internet disconnct, according to my USB again.

  I would be eternally grateful if you could help with this frustrating situation

  Kind regards

  Graham

  Hi CindyThrelkel,

  Try the following steps to resolve the problem:

  Method 1: Run the troubleshooter of material and check what is happening.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3: You can check after uninstalling and reinstalling the USB drivers , if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  a. Click Start and then click Control Panel.

  b. click System and Maintenance, click System and then click on Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  c. in the Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  d. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  If you are still having the same problem then you can check the device USB drivers updated using windows update. See the following help link:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the edge of the question persists I'll ask allows you to check the chipset driver updates you find on the manufacturer's website. The chipset drivers normally integrate USB controller drivers as well.

  You can also check:

  In Windows network connection issues

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

  Hope this information helps.

• USB ports not working no-Windows 7 on Imac

  Hello

  I ve just installed Windows 7 on an Imac end 2012, using an external hard drive and running in Bootcamp.
  Everything went well, Win 7 works perfectly, but all USB ports do not work. Everything I plug into their t doesn't get recognized (flash memory usb cards, mouse usb, external drives...).   They work in OSX.
  All other ports (ethernet, audio, output Thunderbolt) work very well under Win 7.
  What I tried, no still no usb operation:
  -Reinstall Win 7 (just to check that I used a mouse usb, what worked very well right up until the last reboot needed to complete the installation.) Subsequently died)
  -reinstall all software Bootcamp (actually, fix, that you can't just unninstall and reinstall) has done that several times...
  -tried to uninstall the usb ports in Device Manager, I couldn't use my Apple wireless mouse more, so I had to restart after the first. Yes, after a restart, he says it's to install the missing disks, yes they are all perfectly... However - install no USB
  -No, no problems appear in the resolution of the problems of the unit
  Do you have any other ideas I could try?
  Thank you very much.
  Marian Nedelcu
  Here is my config Imac. in case it helps:
  IMac 27 inch Quad-core

  3.4 GHz I7,

  32 GB OF RAM,

  3 to FusionDrive,

  NVIDIA GTX 680MX 2 GB,

  Magic Mouse, Apple wireless keyboard

  Hello

  I suggest you to contact the Apple support and check if it helps.

  http://www.Apple.com/support/Mac/

  Hope this information is useful.