still waiting for the 2.1 update!

Similar Questions

• Still waiting for the new Satellite U840T-102

  We sent the laptop in the subject to support Toshiba in Italy on 5 May. File n. 73040100. After a few emails June 20, we received the proposal to change the product and sending us a new.

  We have NOTHING yet. Our clientele is more waiting for two months for a WARRANTY SERVICE.

  Is this right? It is the policy of TOSHIBA?
  CAN WE HAVE A CERTAIN DATE?

  I understand you very well buddy.
  It s always pity if the laptop is not working properly and if something needs to be replaced.

  I think there is a reason for the delay and I recommend you contact the ASP in Italy once more in order to clarify this matter.

• Still waiting for the confirmation e-mail to arrive for the Windows 7 upgrade download

  I just bought a download to update Windows 7 Starter in the home edition, so I might want DVD on my Dell netbook.  The Microsoft app site said I would receive an email with the key code to download this.  I've been waiting over 2 hours now and still have not received the news.  Is this normal? Thanks for your advice.  Annette

  Have you checked your spam folder?

  Try to contact the Microsoft Store:

  1-877-MY-MSSTORE (1-877-696-7786)
  http://store.Microsoft.com/help/contact-us

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Office State is waiting for the agent

  Dear all,

  I manually installed agent to view a VM comments (ESX4.1), which is managed by a Virtual Center.

  And then I add an individual office by the Administor Console view.

  The status of office is still waiting for the agent.

  Could you give points for this problem?

  Thank you

  Dennis Dai

  Two common reasons is firewall or DNS problems.

  Disable the local firewall and make sure nameresolution works in two ways.

  Best regards

  Linjo

  If you find this information useful, please give points to "correct" or "useful".

• Still waiting for a response to my response of the extra info about "unable to access xbox live because of parental e-mail account misspelled".

  Because the e-mail account was misspelled, we try to get the reset password sent to the email address is not possible, the address it is not mine. I need to reset the e-mail address of origin to the correct spelling, but, so far have not received a response from (ANN N) after that I have repied to his request for more info on 17 Oct. Please don't leave me hanging, bad customer service.

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you with this problem.

  You may need to wait for the response of the person concerned or if there is a problem with the Xbox Live account, check out the following link:

  http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/change-Xbox-Live-account-info

  or

  http://www.Xbox.com/en-us/forums

  If the problem is with windows live account you can report the query in the following forum:

  http://answers.Microsoft.com/en-us/windowslive

  Hope this information helps. If you have any questions do not hesitate to answer, we would be happy to help.

• Please wait for the customer to political group - stop questions

  Hello

  I have problems with the closing of a machine. When the machine is connected to the corporate network, everything works fine. However, if the computer is connected to the VPN (1 hour or more) it is always suspended when it stops. First step in the shutdown process is:

  Please wait for the system event Notification service.

  This change after 3 minutes exactly. Next step:

  Please wait for Group Policy client windows 7

  is never exceeded (even after a few hours). Machine never off.

  Under newspapers there are always these 4 events when the machine stops in vain:

  1. 6005: the winlogon notification subscriber takes a long time to handle the notification event (Logoff).
  2. 4627: the event COM + a system expired attempt to fire the method of logging on the event {D5978650-5B9F-11D1-8DD2-00AA004ABD5E} class for the Publisher and the Subscriber.  The Subscriber has not responded within 180 seconds. The full name of the subscription is "ISensLogon2". The HRESULT is 80010002
  3. 6006: the winlogon notification subscriber took 180 second (s) to handle the notification event (Logoff).
  4. 6005: the winlogon notification subscriber takes a long time to handle the notification event (Logoff).

  Sense has expired after 3 minutes while there is no event 6006 for GPClient and machine is stuck there for centuries (Please wait for the customer to group policy). I noticed in the system logs that before the machine hangs during the shutdown process there are these errors and warnings:

  • 5783: the session configuration for the Windows NT or Windows 2000 Domain Controller \\server for the domain X is not admissible.  The current CPP of Netlogon call on \\machine to \\server was canceled.
  • 1014: name resolution for the name of the server has expired after none of the configured DNS servers answered.
  • 131: NtpClient could not set a domain peer to use as a source of time due to the DNS resolution error on ". NtpClient will try again in 3473457 minutes and double the reattempt interval thereafter. The error was: the requested name is valid, but no data of the requested type was found. (0x80072AFC).

  There is more than 1014 events for different servers and some 131. 5783 is always alone.

  I did a group policy log, because I thought that I will be able to see where the machine stuck. Below you can see the part of the newspaper GPSVC when the machine stops in vain:

  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xe58
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancellation pending appeals
  GPSVC (2d4.1cfc) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x71a
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancelled waiting for calls
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (438.1a04) 21:31:24:327 waiting for user group wire political end.
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xe10
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancellation pending appeals
  GPSVC (218.C88) 21:31:24:327 Client_CompleteNotificationCall: failed with 0 x 525
  GPSVC (2d4.1cfc) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x71a
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancelled waiting for calls
  GPSVC (2d4.9C8) 21:31:24:327 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xdcc
  GPSVC (218.1054) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0x20cc
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.9C8) 21:31:24:327 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xd90
  GPSVC (218.1054) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (218.D48) 21:31:24:342 Client_CompleteNotificationCall: failed with 0 x 525
  GPSVC (218.D48) 21:31:24:342 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (218.1c04) 21:31:24:327 Client_CompleteNotificationCall: failed with 0 x 525
  GPSVC (218.1c04) 21:31:24:342 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: entering with the event 0 x 2100
  GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: entering with the event 0 x 1264
  GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0

  I excluded 1 GP machine and left on the VPN for a few hours, several times. He always stopped correctly.

  However I tried with the VPN disconnection before turning off the machine, I even turned off WiFi but machine still hanging. If I tried to get GP results it takes ages before stopping the machine and he's stuck in the step "to get the user name. Gpupdate/force will never update policy (it stops at policy update...). I tired with the installation of different patches that has not solved the problem.

  I think that there is that DNS issues while the machine is on VPN which led the GP cannot be applied. When the machine tries to close it is always somehow connected. There is no problem with the connection, no GP application script when the user disconnects, not roaming profiles.

  Does anyone have the same problems? All machines are Dell with Juniper NC (VPN).

  Thank you

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet forum: For Windows 7 

  Hope this information helps.

• still waiting for out of warranty repair to fix my pc.

  Hello I have an alien ware m18x and spent a lot of money on this laptop. I liked from the start, but not even a year after the motherboard came out no problem my warranty covered. Welcome to 5-6 months later my warranty has expired and bam the motherboard went out to new same problem than before. It happened in mid-term for the College so I called the guy and a week later was able to pay and send my laptop.

  now, this is where I am getting very angry with dell. When I sent that far they told me 7-10 working days although we are on day 20 now and nothing has been done with this laptop. Let's start in the order of all the stuff that has happened since you guys my laptop.

  1. I sent the laptop to you guys, but it took 2 days for the depo to sign for it.

  2. the depo began working on it and then 5 seconds later put a shim of payment by saying that I did not pay $430. It took about 3-4 days of calling me support and begging them to tell the depo I paid and even provide my payment number.

  3. have you called agents support so many times to ask what is the hold up because the depo never updates the link, they sent me in email. officers tell me to wait and just check the link.

  4 depo puts a wedge of parts which took more than 2 weeks to find just that part. I'm always told that they do not always have a part.  Nobody sews really to find out what is happening right now.

  honestly, I regret spending crazy amount of money I did on this mobile no only I'm still waiting for some news as to when its going to be fixed, but this delay destroyed my college this semester. I have finals in 2 weeks, I also have my review of certification compIT in 3 weeks all the stuff that I need are in the computer including all my papers. I am begging you guys just get my laptop fixed or ask someone who speaks English actually could you tell me what is happening.

  honestly, I want to start looking for a monetary value for the amount of hassle, than what has been. «There was a lot more, but as I am not the kind of person that insults people I haven't posted it.» but lets just say that some calls where not very beautiful side valleys.

  Hello Travis,

  First of all, I would like to apologize for any discomfort your siding with your system and the time it has taken to repair the unit.

  From time to time, Dell may run into questions parties may run out of stock and there is not a viable substitute available role. That puts us in a position of having to order the parts from our suppliers and await his arrival. Without knowing the details of your case is probably that your run in. You won't see any changes on the filing status tool until the device is taken out of the hold of the party or other actions take place.

  I am working actually came out of the repair center, and I can check some internal tools to see if I might be able to get a better eta on when the requested party should. If you want to consult me send me a request for direct message with the Service Tag, shipment number and the name of the system is saved. Don't post personal information on the public domain.

  It is recommended, especially when you could be without your systems for a few days, it is best to have a backup of your data separate from your system.

  Kind regards

• Dreamweaver stops on waiting for the CC 2015.1 Server

  HELP Please! I've been using DW flawless since 2002,

  
  

  The issue of dropping out said last updated - make some changes to a page on the site for a few minutes, download to review my work. And then I sit and wait 3 minutes to reconnect, connect I am good, until I go to edit a photo or change a file for too long. Then it seems it disconnects and takes an eternity to think about let me download a file again. I'm working on 60 sites and production is really DEAD.

  The background file activity > waiting on the server > still waiting on the server > 2-3 minutes will enter a "sandwich", hit the bathroom, check the mailbox > Bingo file has downloaded or corrupts with an 'X' next to the file name.

  I download "say the css" and the delay may take minutes to reconnect to the server, of course it sucks. Not even the worst.

  Sometimes it blocks if long he stops and an arrow in grey or X appears next to the file. What happens then can cost someone a job. It will be only 1/2 load the file is corrupted this person who file on the server. Let this stylesheet or whatever corrupt, missing or broken, you can even tell unless you refresh your browser to see that the style sheet is corrupted. It is a huge problem, I never had this happen to me and I have been using DW for 16-17 years.

  • I have a protégé and perfectly clean machine, not blazing fast internet 100 MB low, Hard wired, should be no problem.
  • Passive FTP mode is checked.
  • Use FTP performance optimization is checked.
  • I did the usual- Restore custom settings
  • delete the folder Dreamweaver configuration, same deleted and reinstalled the software, it is up-to-date 2015.1
  • I contacted a representative he was going well, that they were doing research, then I received an email and they closed my case without reason, I sent them back and no response.
  • HELP PLEASE!
    
    

  Enable/disable the FTP mode passive power.   See screenshot.

  

  Go in Edition > Preferences > Site.  Try increasing the values where indicated.

  

• HP Split x 2: not enough space for the Windows 10 update

  I have a Split of HP x 2 (64 GB SSD, drive hard 500 GB) running Windows 10.  I recently received notification of an update of Windows 10 version 1511, 10586.  Trying to install the update, I get an error message saying that Windows needs more space on C:, specifically 8.13 additional GB.

  Settings Windows reports 58.9 gb of 59.2 GB already used on C: which is 47.2 GB ' system and reserved.

  The update program says that I can use another drive for the update and I tried the built in D: (more than 200 GB free) and an external drive (900 GB free), but the update will fail with the same message outside a slight reduction in the amount required on C: (7.17 GB) of free space.

  I had already cleaned useless all the files using the Windows disk clean and have less than 6 GB in applications and data, in order to get rid of everything that would still runs.

  All GB 47.2 OS is really necessary?  Any large pieces I can get rid of, or is the only way an SSD upgrade?

  PeSke

  Only in the last day or two, MS has eliminated a new update of Win10 who, claim, addresses the problems of people said that they do not have enough disk space for the Nov 10 update and when they provide you with an external hard drive, it will not use it.

  I suggest that you are looking for updates and see if it is applied and then retry the update 10 Nov.

  Good luck

• Start stuck on "Please wait for the Local Session Manager."

  I would say that this problem started a couple of days. Went to start my laptop (Toshiba) and he sat on the "Please wait" message forever.

  Had no problems to start in safe mode. Looked up various ways of addressing the problem.

  Was able to change the resume date and back a few weeks ago. Still no luck. Happened to read something on a printer Epson being perhaps the problem driver (it was installed a day before the date of restoration chosen). Uninstalled the drivers, computer still does not start.

  Tried restarting running. I do not have the CD it came with Vista, but it was an option when you hold F8 during startup (I think?) Couldn't find any problems.

  Ran check on memory. No problem either.

  Changed settings for a verbose startup and ran a Diagnostic startup - all good for this. Then tried selective startup load system services... This is when the error occurs. When starting, it hangs on "Please wait for the Local Session Manager" and does nothing more.

  I looked in the event viewer to see what came that time and a couple mistakes were:

  Event ID 6000: winlogon notification subscriber was unavailable to handle a notification event.

  Event ID 7026: the next (s) start or start failed to load system
  spldr
  Wanarpv6

  It would be very useful for me not having to run my computer in safe mode automatically all the time, although it is useful that I at least have that option. Any help is greatly appreciated.

  Hello

  1. by chance your computer is connected to a domain environment?

  2. as you mentioned in your article that you tried the selective startup, I want to confirm if you have disabled the services left 3rd after hide Microsoft services?

  If you did not disable these services make sure you disable and then check if it works.
  See the article below for more information.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Editing screen, but still wait for thread to return

  I have an app that makes updates to the user interface through a reference to a bitmapfield a new thread, and that thread is updating the user interface.

  The problem I have is that I want the main thread "wait" wire under update charts, before continuing with the "game".

  so... for example...

  // update the main bitmapfield  pt = new PlayerThread(bfField,square);
  pt.start(); 
  
  // wait for the thread to finish updating the ui while (pt.isAlive()){}
  

  Now, I * KNOW * it is not the right way to do this, because the UI is not updated, because the user interface is in a loop waiting for the thread ends, which defeats the purpose of having the thread in the background in the first place.

  What is the 'proper' waiting to do this? I completely missed the point to put on?

  It works fine if I do not "wait" for the thread, but this means that the user can press the buttons, or interact with the game when they aren't supposed to.

  I thought that there must be a way to define a 'isthreading = true' var and disable keys by adding an if statement to my keydown, but how can I make my app "waiting" for the thread, I created to be finished, but not really break the UI itself?

  I hope that was clear...

  You need a reporting mechanism indicating the UI thread "I'm done" or "the data is ready. Never loop in a UI thread - this will cause finally the event queue to overflow, which ask you dumped as "refractory".

  A typical mechanism is to implement a listener and a data event. The "interested" party registers a listener with the background thread, the background thread fires the event data when appropriate.

  If there is only a single listener, then it can be implemented with fewer resources by using a callback mechanism.

  Search for references to the model of the observer:

  http://en.Wikipedia.org/wiki/Observer_pattern

• new SSD HP Pavilion HPE win 7 home Premium Error: Driver_Power_State_Failure Bluescreen from 30 to 45 minutes waiting for the stop down.

  Hello all, there

  I recently installed a new SSD in a HP Pavilion HPE with windows 7 Home premium. After this event I get bluescreen Driver_Power_State_Failure after about 30-45 minutes waiting for the computer to stop. I have a minidump file if this will be useful and I would be very grateful if someone could help me solve this problem :D

  Minidump: http://www.mediafire.com/?hy7so6n9af5f73v

  I hope this helps and all support is most appreciated!

  The tihub3.sys seems to be in question:

  BUCKET_ID: X64_0x9F_3_POWER_DOWN_IMAGE_tihub3.sys

  The tihub3.sys, which is dated January 14, 2011, is a Texas Instruments USB 3.0 driver so try to update this driver by installing the next update:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-108667-1&CC=UK&DLC=en&LC=en&os=4063&Product=5144370&sw_lang=

• While turning on the laptop its gives me a message "your pc will restart in two days for the installation of updates.

  About a week ago I just bought windows mobile 8 is installed. Now for the last two days while turning on the laptop its gives me a message "your pc will restart in two days for the installation of updates.

  To stop, I get three option 1) sleep 2) arrested update 3) and close

  What should I do?

  Original title: windows update issue 8.

  Hi Parichay,

  The updates that are being invited to install are automatic updates.

  The message you get is offered by Windows 8 after that updates are downloaded and installed.

  If you do not restart your computer soon, Windows will force a restart of your computer two days after that it has installed new updates to complete their installation.

  You must restart your computer at a convenient time for you, rather than wait two days and have it suddenly reboot maybe at an inopportune time.

  Hope that solves your problem.

• CREATE INDEXES online is waiting for the TX = 4 mode

  Hello

  I have a strange blocking problem where an INDEX CREATE LINE is waiting for a transaction that did only inserted a line in the parent table.

  Wait is mode TX = 4 (not TM locks) and I currently have it reproduced only on 11.2.0.3 and 11.2.0.4

  Easy to replicate the schema SCOTT:

  Session 1:

  SQL > set time on

  14:54:58 SQL > insert into SCOTT. Dept (DEPTNO, dname) values (50, 'test');

  1 line of creation.

  Session 2;

  14:55:24 SQL > create index test on SCOTT. EMP (ename) online;

  It's waiting ' enq: TX - line lock conflict ":"

  SQL > select sid, chain_signature from v$ wait_chains where blocker_is_valid = 'TRUE '.

  SID CHAIN_SIGNATURE

  ---------- ----------------------------------------------------------------------

  603 ' SQL * Net client message' < ='enq: TX - line lock conflict '

  While waiting to acquire the lock of transaction in mode 4:

  SQL > select * lock gv$ where sid = 603

  INST_ID SELECT ADDR KADDR SID TYPE ID1 ID2 LMODE CTIME BLOCK REQUEST

  ---------- ---------------- ---------------- ---------- ---- ---------- ---------- ---------- ---------- ---------- ----------

  1 00000006CDA05EB8 00000006CDA05F10 603 352577 0 4 0 348 2 AE

  1 00000006CDA06078 00000006CDA060D0 603 DL 779505 0 3 0 308 2

  1 00000006CD9FABE0 00000006CD9FAC38 603 DL 779505 0 3 0 308 2

  1 00007F28001F5028 00007F28001F5088 603 779505 0 2 0 308 2 TM

  1 00007F28001F5028 00007F28001F5088 603 779510 0 4 0 308 2 TM

  1 00000006CD9FA240 00000006CD9FA298 603 779505 0 4 0 308 2 OD

  1 00000006B4F26790 00000006B4F26808 589847 711499 6 0 308 2 TX 603

  1 00000006CDA0ED68 00000006CDA0EDC0 655377 996169 0 4 308 TX 603 0

  I've traced 10046 and 10704:

  broadcast message = obj 29231196672 #= 779514 tim = 1447251053634045

  ksqgtl * mode TX-000f001e-000ad97c = 4 flags = 0 x 10001 timeout = 21474836 *.

  ksqgtl: xcb = 0x6bb322528, ktcdix = 2147483647, topxcb = 0x6bb322528

  ktcipt (topxcb) = 0 x 0

  ksucti: init logon has of txn DID:

  ksqgtl:

  ksqlkdid: 0001-003F-0000AFC4

  ksudidTrace: ksqgtl

  ktcmydid(): 0001-003F-0000AFC4

  ksusesdi: 0001-003F-0000AFC3

  ksusetxn: 0001-003F-0000AFC4

  ksqcmi: TX, f001e, ad97c mode = 4 timeout = 21474836

  2015-11-11 15:11:36.566

  WAITING #140700792578680: nam ='enq: TX - line lock conflict ' ela 42932082 name = | mode = 1415053316 usn < < 16 | location = sequence 983070 = obj 711036 #= 779514 tim = 1447251096566283

  And there is nothing in V$ SESSION leader/block/line current. class obj # is EMP. current sql_id is the CREATE INDEX.

  If anyone has an idea on:

  -Why creating an index in line must wait for transactions that modified only parent table

  -How to continue the investigation

  -can or cannot reproduce in other versions

  Thanks in advance,

  Franck.

  I guess you have a constraint foreign key between emp and Dept.

  It's expected behaviours: since 11.1 any DML at one end of a referential integrity constraint translates into a mode lock 3 taken at the other end, and your phenomenon resembles a side effect of this.

  When you try to create the index online that your session must assume that the other session (holding mode 3 on the emp and dept) may have changed the emp and dept, so it must wait for the session to the commit or rollback.

  (I guess that in principle, he could walk the cancellation of the transaction see if EMP had in fact been changed - but maybe who was considered too complicated to be worth the risk to implement)

  Concerning

  Jonathan Lewis

  Updated - I just did a quick check to reproduce the effect on 11.1.0.7

  For reference - here are a few notes on modes of locking and how the application has changed over time: https://jonathanlewis.wordpress.com/2010/06/21/locks/

• Photoshop has given up waiting for the assessment

  I have an error message at startup "photoshop gave up waiting for the assessment of the display driver. Improvements using graphics hardware have been disabled. "If I click 'ok', Photoshop and then freezes. How can I fix this as it has been nothing more than a waste of money.

  Windows 7 Home Premium

  64 bit

  Hi Chris,

  This error means that your graphics card is not updated or have problems loading.

  Try to update your graphics driver.

  Make sure that you meet the requirements according to your version of Photoshop system requirements | Photoshop

  The problems of GPU, GPU Photoshop Troubleshooting FAQ

  Please post on the Adobe Forums

  Let us know if this helps

  ~ Assani