Stimulus package SRM and EMC Mirrorview/S failed

Similar Questions

• PowerShell / script PowerCLI is not execution of the stimulus package SRM

  I posted this in the community of the Site Recovery Manager, but thought that the PowerCLI community may be able to help as well. *****

  I can't run a script PowerShell to a recovery plan, even if I can't run interactively from the SRM of recovery server and command CMD run OK.

  Here is the error I get:

  Error: user designed legend "C:\Windows\system32\cmd.exe /c C:\test.cmd" has not returned in 300 seconds.

  The recovery plan called test.cmd, which is basically redirected to the PowerShell script.

  REM ===== test.cmd =====
  @echo off
  echo > C:\1.txt
  C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -NoLogo -ExecutionPolicy RemoteSigned -Command C:\test.ps1
  echo > C:\3.txt
  REM ===== end of test.cmd =====
  

  Test.cmd called test.ps1, that only creates a CSV file for troubleshooting.

  # ===== test.ps1 =====
  Add-PSSnapin VMware.VimAutomation.Core -ErrorAction SilentlyContinue     # Load VMware PowerCLI functionality
  Write-Host foo | Export-CSV C:\2.txt
  exit
  # ===== end of test.ps1 =====
  

  Note that I created the process text files to see where the script stops. When I run test.cmd of the stimulus package, 1. txt is created, but 2. txt and txt 3. are not created. When I run test.cmd interactively from the SRM of recovery server, all three text files are created.

  
  My environment is 4.1 SRM and PowerCLI 4.1 build 332441 U1.

  Any help would be appreciated. Thank you.

  Things to check.

  (1) under which the account is the .cmd file and therefore the .ps1 file, executed in SRM?

  Maybe the RS account does not have the same privileges

  (2) I would like to start the PowerShell engine in the with the parameter - NoProfile .cmd file.

  A general Council, try to use the cmdlets Start-Transcript and Stop-Transcript at the beginning and at the end of your PS script.

  Have you ever tried to create a .txt file before loading the PowerCLI snap?

• SRM and EMC Solutions Enabler

  Hi all

  I'm looking in the options available for implementation of the Site Recovery Manager with EMC Symmetrix storage.

  We are looking for ways to use the Solutions Enabler to avoid the need to directly attach the MRS server to the storage group.

  I can be this misunderstanding, but is it not possible to install the activator of solutions on an ESX host and use this host as a gateway to the table?

  I imagine that if this is how things work then the Activator would install on the Service Console OS within ESX?  Is something similar to happen with ESXi?

  Thanks in advance for any guidance.

  Dave

  Although it was possible to use the ESX host, it is not at all achievable with ESXi.  I personally found that by using a dedicated server to Solutions Enabler and the installation of the client on the server services SRM has been the most elegant implementation.

  Tim Oudin

• SRM and EMC Clarion

  Hi, quick question, I'll implement a SRM environment using 2 emc cx-420, I configured the storage on both sites and set up areas etc, I presented and configured LUNS on the site of production as vmfs volumes

  My question is, you will need to add on the site dr vmfs LUNS before configuring the srm or is there an intelligent process on the replication san adapter to do this

  You will need create a VMFS volume on protected site, this volume get replicated to the recovery site using berries replication technology. When you do a failover LUNS will be published on the recovering site, hba will be reread and the volume will be resigned. I suggest to start reading the pdf RS admin file that contains a wealth of information:

  http://www.VMware.com/PDF/srm_10_admin.PDF

  Duncan

  Blogs: http://www.yellow-bricks.com

  If you find this information useful, please give points to "correct" or "useful".

• Test plans with DR with SRM and EMC SRDF Adpater

  I'm testing my DR using TimeFinder/snap plan. When I try the test I got some errors. We have 2 Symmtrix and replicated LUNS are snapshoted in order to test the DR Plan. This error refers to the EmcSrdfSraOptions.xml. I can't find any info on Powerlink related to these errors. Someone met with such a problem?

  [05/04 10:34:42 05912 CopyLuns::GetCopyInfo CopyLuns.cpp 0463] : a valid block CopyInfo is not found in the options file that has Symm . Exit with failure

  05/04 10:34:42 05912 CopyLuns.cpp 0469 CopyLuns::GetCopyInfo Output

  05/04 10:34:42 05912 CopyLuns.cpp 0021 CopyLuns::CopyLuns : Could not retrieve CopyInfo since the options file. Exit with failure

  : Could not test the failover LUNs. Exit with failure

  I have attached a copy of the file xml options.

  THX

  THX.

  Exactly the same problem. Solve you this problem?

• VMware SRM 5.8 and EMC RP

  Hi people,

  We have implemented 5.8 SRM with EMC RP 4.1 (array-based replication). Even if we validate us migration we encounter several issues as shown below.

  ERROR 1:

  2.3 stop priority 3 VMs

  Error - operation exceeded: 300 seconds

  ERROR 2:

  5. restore the hosts of sites protected from sleep mode

  Error - the object has already been disposed or was not completely created

  ERROR 3:

  6.1.2 change the location read-only

  Error - Impossible to lower source devices. SRA command 'prepareFailover' failed. Failed to logon to user of the site IP mgmt. Check the logs of the server for more details. Do not downgrade to source devices. SRA command 'prepareFailover' failed. Failed to logon to user of the site IP mgmt. Check the logs of the server for more details.

  Error "Failed opening session for the user to the site IP mgmt", seen so even the matrix to SRM Manager configuration. But the same have resolved after you have enabled the "https" to two Can MRS. Mrs. somebody please help understand the question? I tried re-record ESXi nodes to vCenter inventory, restart ESXi and other infra servers, etc. But no luck.

  Thank you!

  Best regards

  Hari Narayanan.

  Guests of protected sites are restored from sleep mode (DPM is disabled) so that storage can be removed on their part and set to read only.

  I agree with what said GSS, the problem with the LUN downgrade error is very likely with the SRA and that is why EMC. I think as the hosts of the protected site of sleep problem can be linked to that as well (not able to remove LUN?)

  About your VM stopping, you say that the virtual machine stops successfully? The default value is for MRS wait 5 minutes (300 seconds) for closure, if the virtual machine takes more time that you do not want to change the timeout value in the advanced settings. See here for more details: Site Recovery Manager 6.0 Documentation Center

• SRM (5.5) Test failover fail to power on multiple machines

  SRM (5.5) Test failover fail to turn on several machines withSRM failed to Test failover to power on multiple machines with the error - the timeout of waiting for VMware Tools after 300 seconds operation: 900 seconds timeout of waiting for VMware Tools after 300 seconds operation has expired: 1200 seconds operation exceeded: 1 200 seconds.

  Note: the virtual machines have updated the VMware ESXi host (protected site and recovery) tools running on the same build version.

  Here since the vmware tools are the heartbeat of VM (guest OS must load and send a heartbeat) to avoid this overall, you can also uncheck under option, so the vmwaretools would not wait and loads successfully.

  Right-click the virtual machine in the stimulus package and select Configure.

  Go to the Start Action > Power On > wait for VMware tools.

  Or as the only option to get out of this recommendation is to increase the timeout value, however it has been confirmed that this behavior is that during the test above fail and real failure during work very well even if does not meet any specific setting.

  Steps to change the time-out value:

  Right-click the virtual machine in the stimulus package and select Configure.

  Go to the Start Action > Power On > wait for VMware tools.

  Change the default value of 5 minutes to 15 minutes.

  .

• EMC MirrorView SRA for MRS 4.1 support

  Does anyone know if the latest EMC MirrorView SRA has been certified for MRS 4.1? I checked the release notes on powerlink and there is no mention of MRS. 4.1, 4.0 only.

  Thank you

  Pawel

  I think that all certified VMware adpaters are displayed at http://www.vmware.com/pdf/srm_storage_partners.pdf. By this link EMC CLARiiON MirrorView SRA Version 1.4.0.16 supports SRM 4.0 and 4.1.

• I tried to update to IE9 and he returned as failed with error 800F080D. Why is - this happenning

  I tried to update to IE9 and he returned as failed with error 800F080D. Why is - this happenning

  Hi Tena Guevara,

  1. did you try to install the stand-alone package of IE 9?

  I suggest you to check if you have all the prerequisites installed for internet explore 9 http://support.microsoft.com/kb/2399238

  Alternatively, you can try to install the stand-alone package of IE 9 and check: http://windows.microsoft.com/en-US/internet-explorer/downloads/ie-9/worldwide-languages

  Refer also to the links below and check if you have done all the requirements before installing internet explore 9-
  Solve the problems when you can't install Internet Explorer 9

  http://support.Microsoft.com/kb/2409098

  How to install or uninstall Internet Explorer 9?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9

  Hope this information is useful.

• SRM and HP EVA 8400/6400 error

  SRM with HP EVA-8400/6400 returns an error when you run a test:

  Error - Failed to create snapshots of the replica devices. SRA command 'testFailoverStart' failed. Unable to create snapshot Action to create a shot Snapshot failed because of an error on the table cannot create snapshots of the replica devices. SRA command 'testFailoverStart' failed. Unable to create snapshot Action to create a shot Snapshot failed because of an error on the table cannot create snapshots of the replica devices. SRA command 'testFailoverStart' failed. Unable to create snapshot Action to create a tour Snapshot failed because of an error on the table.

  Response from HP:

  It seems that EVA communicates very well with the Sra So. now, you need to scan for the SRA in SRM and then try to perform the replication again. If she fails to perform replication with the SRM then you will need to contact the VMware team, because that would be a problem with the SRM and not a problem with the EVA contacting the SRA.

  Not sure what Miss us here. I work with the administrator of storage without result.

  We found the problem, it was because of the permission on the user account for the table. Need to be added to the storage administrators group.

• I keep getting "the trust relationship between this workstation and the primary domain failed" error windows 2008R2

  Hi all

  I appreciate your help. And I hope that this issue has been addressed previously, although I couldn't find any solution there.

  I manage a domain windows 2008 with 3 domain controllers. Recently my workstations continue to fall out of the field. I get "the trust relationship between this workstation and the primary domain failed" to many workstations.

  I know how to fix properly, use netdom.exe. But the mistakes keep coming back. I don't know where to look for the source of this error. A possible problem might be the time in any field is out of sync. But all my workstations synchronize with the domain controller with the primary domain controller role and seems to work correctly.

  Are there other sources, that I need to check? This is getting frustrating.

  Thank you much for the help.

  Sincerely,

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

  recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

  Hi mikedav,

  Thank you for using the Microsoft Windows Vista Forums.

  Method 1:

  Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the link below and follow the instructions.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  If you are not able to connect to the internet after you install the update, you need to optimize Internet explorer by following the instructions below.

  Method 1:

  Follow the instructions in the link below which will help you solve the problem.

  Tips for solving problems with Internet Explorer

  http://windowshelp.Microsoft.com/Windows/en-us/help/8038f9ac-9bf9-4809-8d75-fc42818d8af71033.mspx

  Method 2:

  Follow the instructions in the link below to optimize Internet Explorer.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Windows Update failed to install KB2506212. Tried several times (6) and it continues to fail. Any ideas?

  Windows Update failed to install KB2506212. Tried several times (6) and it continues to fail. Any ideas?

  Mark s.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Hardware diagnostics: "SMART short Self Test - failed" and "targeted read Test Failed.

  Original title: "SMART short Self Test - failed" and "targeted read Test Failed", all the patches?

  When using PC checkup of Dell I get the following errors; during the analysis of the material. "SMART short self-test - failed" and "targeted read Test Failed", all the patches?

  Hello Duane,

  Teke section of the Web site that speaks of similar problem.

  http://forums.techguy.org/hardware/906455-smart-short-self-test-fail.html

  The problem is with the hardware and you can get in touch with Dell computers.

• Update error... I tried to update for the month and each time it fails

  I tried to perform updates for the month and each time it fails.  I get the same error message... Code 646 WIndows has encountered an unknown error.  I did troubleshooting and you are unable to find assistance.  I don't know much about the workings of the computer, but I know that I should be able to perform these updates.  I think I need it too.  I have 9 at this stage that it cannot load.  Help, please!

  I tried to perform updates for the month and each time it fails.  I get the same error message... Code 646 WIndows has encountered an unknown error.  I did troubleshooting and you are unable to find assistance.  I don't know much about the workings of the computer, but I know that I should be able to perform these updates.  I think I need it too.  I have 9 at this stage that it cannot load.  Help, please!

  This link leads to a response from Bobby Mi, moderator.
  Date: July 6, 2010
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/18449f60-C149-4EAF-B8E6-a2880cd7232b

  Bobby Mi response will lead to this tutorial from Microsoft Support:
  http://support.Microsoft.com/kb/2258121

  Hope this can help solve your problem.
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.