Test plans with DR with SRM and EMC SRDF Adpater

Similar Questions

• I already have a monthly plan with Adobe and I use Lightroom on my Macbook to date. I just got a new iMac from Apple and I went to the Adobe site to download Lightroom on the new desktop, but I can't understand it. I'm going along in circles! H

  I have a new office and myself can not understand how to download Lightroom, without registering for an account or a new trial! I have a monthly plan with Adobe already and have been using Lightroom on my laptop. Can anyone help please?

  1. Sign in to your account on www.adobe.com
  2. Download and install the cloud desktop application
  3. Using the cloud desktop application, install Lightroom CC 2015.3

• Stimulus package SRM and EMC Mirrorview/S failed

  Hello!

  I have 2 servers, one with ESX 3.5 fU1 Foundation as a protected site and other ESX 3.5 U3 in mode assessment on recovery site.

  CLARiiON CX4-120 with FLARE 4.29 on two sites with fiber mirror active conection.

  Virtual Center 2.5.0 (trial mode), SRM 1.0.1 (trial mode) and EMC MirrorView SRA 1.4.0.15 are installed on both servers.

  I have the virtual machine on Mirrorview/s LUN replicated and SRM connection, management table, the mappings of the inventory and protection group configured on the protected site.

  Plan of stimulus is configured on the recovering site, and when this plan is stable or running - error has occurred (error in the photo and log attached).

  Can you help me? May be a few steps are missing... hm...

  Hi Veli,

  It seems also the newspapers have no consistency groups to be created. It is also a requirement with the SRA Mirrorview (well, it used to be, not sure about the SRA new).

  It might be interesting to look at a doc I wrote on how to implement the Mirrorview and Clariion for MRS.

  You can find it here:- http://viops.vmware.com/home/docs/DOC-1227

  HTH

  Cormac

• Test Planning with HP LoadRunner 8.1 11.1.1.2 - is it possible?

  Does anyone know if it is possible to test Hyperion Planning 11.1.1.2.20 with LoadRunner 8.1? Our test team would like to test the fitting of a balance sheet by using this version of LoadRunner, but also a number of other stress tests to see how the system copes planning.
  
  The tester reported that they encountered problems when you try to connect to the workspace by using LoadRunner. The debate in question here seems to be if planning uses static or dynamic encryption. We think that Hyperion uses dynamic encryption on user credentials for database connections, but that LoadRunner is unable to replay the session with dynamic encryption.
  
  The tester was able to connect LoadRunner intends to perform the test. Unfortunately I have very little information by hand (as you can see!), but can anyone please comment / provide thoughts on that? Is this possible? These versions are compatible? Hyperion can be configured to use static encryption, and if so is it likely to help?
  
  I'll give you more information about the exact nature of the error once I heard of the tester.
  
  Published by: James D 6 July 2010 13:40

  It seems that they do not address the UNIQUE authentication token. This is described in the document above. It is a dynamic variable. Let them review and ensure that they treat the sso_token and the repository_tokens. Those are the main two dynamic variables.

  Kind regards

  John A. Booth
  http://www.metavero.com

• Restore to another node with RMAN and EMC Networker

  Please, really need help :)
  
  
  I took hotbackup using the RMAN catalog who went to Ribbon. Here's the script to this:
  
  
  connect target sys /***@PROD;*
  connect rcvcat rman /***@catalog;*
  * run {*}
  allocate channel t1 type 'SBT_TAPE ';
  Send ' NSR_ENV = (NSR_SERVER = '* ', NSR_DATA_VOLUME_POOL = Oracle)'; *
  * backup database more archivelog; *
  * output channel t1; *
  *}*
  
  
  
  My settings include the following control file autobackup:
  
  
  
  * RMAN & gt; View all; *
  
  RMAN configuration data are: *.
  CONFIGURE THE RETENTION POLICY TO RECOVERY OF 10 DAYS WINDOW; *
  CONFIGURE THE BACKUP OPTIMIZATION # by default *.
  CONFIGURE THE DEFAULT DISK DEVICE TYPE; *
  * CONFIGURE CONTROLFILE AUTOBACKUP. *
  * CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE 'SBT_TAPE' AT ' /NMO_%F/';*
  CONFIGURE THE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default *.
  CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default *.
  * CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default *.
  * CONFIGURE ARCHIVELOG BACKUPS FOR DEVICE TYPE DISK TO 1; # by default *.
  Set UP the CHANNEL DEVICE TYPE DISK FORMAT ' /data/backups/PROD/ora_df%t_s%s_s%p';*
  * CONFIGURE MAXSETSIZE TO UNLIMITED; # by default *.
  CONFIGURE THE ENCRYPTION OF DATABASE # by default *.
  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default *.
  CONFIGURE THE ARCHIVELOG DELETION POLICY NONE; # by default *.
  CONFIGURE SNAPSHOT CONTROLFILE NAME to ' /data/backups/PROD/hotbkp/snapcf_PROD.f';*
  
  
  
  
  I am trying to restore this backup tape (EMC Networker) to a different node. I can do this outside Networker without any problem. However, when I try to get the tape backup, I have this problem:
  
  1 initPROD.ora is created and changed accordingly on a new server
  
  2 export sid, startup nomount on new server
  
  export ORACLE_SID = PROD (on server)
  
  * rman target / *.
  * startup nomount *.
  
  
  
  3. I then execute the following and get this error:
  
  
  
  * RMAN & gt; Run {*}
  * 2 & gt; allocate channel t1 type 'SBT_TAPE. "
  * 3 & gt; Send 'NSR_ENV =(NSR_SERVER="***",NSR_CLIENT="***") "; *
  * 4 & gt; Restore automatic backup controlfile; *
  * 5 & gt; SQL 'edit the editing of the database'; *
  * 6 & gt; SQL ' alter rename file ' / data/dbf/PROD/redo01.log ' to /data/scratch/dbf/PROD/redo01.log"';* '
  * 7 & gt; SQL ' alter database file rename "/data/dbf/PROD/redo02.log to"/data/scratch/dbf/PROD/redo02.log"';*"
  * 8 & gt; SQL ' alter database file rename "/data/dbf/PROD/redo03.log to"/data/scratch/dbf/PROD/redo03.log"';*"
  * 9 & gt; until the sequence 22; (I get this from archive logs) *.
  * 10 & gt; the value of newname for datafile 1 to ' /data/scratch/dbf/PROD/system01.dbf';*
  * 11 & gt; the value of newname for datafile 2 to ' /data/scratch/dbf/PROD/undotbs01.dbf';*
  * 12 & gt; the value of newname for datafile 3 to ' /data/scratch/dbf/PROD/sysaux01.dbf';*
  * 13 & gt; the value of newname for datafile 4 to ' /data/scratch/dbf/PROD/users01.dbf';*
  * 14 & gt; restore the database; *
  * 15 & gt; switch the datafile. *
  * 16 & gt; recover the database; *
  * 17 & gt; ALTER database open resetlogs; *
  * 18 & gt; }*
  
  * allocated channel: t1 *.
  * channel t1: sid = 149 devtype = SBT_TAPE. *
  * channel t1: NMO v4.5.0.0 *.
  
  From restoration to the 27 February 09 *.
  
  * channel version: t1 *.
  *RMAN-00571: ===========================================================*
  * RMAN-00569: = ERROR MESSAGE STACK FOLLOWS = *.
  *RMAN-00571: ===========================================================*
  * RMAN-03002: failure of the restore command at 2009-02-27 22:10:43 *.
  * RMAN-06495: must explicitly specify the DBID with the SET DBID command *.
  
  
  
  
  I can't pass this error. This error indicates that PB be mounted or set DBID before the restoration of the controlfile. Installation of the db before the restoration of the controlfile does not work. Db setting 1 ID) is not logical because if the main PB is down so I can't, right? My first is now, so I was able to get the IDs of db, but setting it does restore hang by what follows:
  
  
  
  * RMAN & gt; Run {*}
  * connection target *.
  * set the dbid = 466048808 *.
  * 2 & gt; allocate channel t1 type 'SBT_TAPE. "
  * 3 & gt; Send 'NSR_ENV =(NSR_SERVER="***",NSR_CLIENT="***") "; *
  * 4 & gt; Restore automatic backup controlfile; *
  * 5 & gt; SQL 'edit the editing of the database'; *
  * 6 & gt; SQL ' alter rename file ' / data/dbf/PROD/redo01.log ' to /data/scratch/dbf/PROD/redo01.log"';* '
  * 7 & gt; SQL ' alter database file rename "/data/dbf/PROD/redo02.log to"/data/scratch/dbf/PROD/redo02.log"';*"
  * 8 & gt; SQL ' alter database file rename "/data/dbf/PROD/redo03.log to"/data/scratch/dbf/PROD/redo03.log"';*"
  * 9 & gt; until the sequence 22; (I get this from archive logs) *.
  * 10 & gt; the value of newname for datafile 1 to ' /data/scratch/dbf/PROD/system01.dbf';*
  * 11 & gt; the value of newname for datafile 2 to ' /data/scratch/dbf/PROD/undotbs01.dbf';*
  * 12 & gt; the value of newname for datafile 3 to ' /data/scratch/dbf/PROD/sysaux01.dbf';*
  * 13 & gt; the value of newname for datafile 4 to ' /data/scratch/dbf/PROD/users01.dbf';*
  * 14 & gt; restore the database; *
  * 15 & gt; switch the datafile. *
  * 16 & gt; recover the database; *
  * 17 & gt; ALTER database open resetlogs; *
  * 18 & gt; }*
  
  * connected to the target database: (not mounted) PROD *.
  
  running command: SET DBID *.
  
  * using the control file of the target instead of recovery catalog database *.
  * allocated channel: t1 *.
  * channel t1: sid = 152 devtype = SBT_TAPE. *
  * channel t1: NMO v4.5.0.0 *.
  
  From restoration to the 27 February 09 *.
  
  * channel t1: looking for autobackup day: 20090227 *.
  * channel t1: looking for autobackup day: 20090226 *.
  * channel t1: looking for autobackup day: 20090225 *.
  
  
  
  
  It seems that it does not find the controlfile autbackup? But when I have the backup list when you are connected to the target db and rman catalog, I see that autobackup is included in each hot backup that we do:
  
  
  
  * Unit size of Type LV BS key Type time elapsed time end *.
  
  
  
  * 4639 full SBT_TAPE 7,00 M 04:00:00 February 27 09 *.
  * BP key: 4641 status: AVAILABLE Tablet: NO tag: TAG20090227T150141 *.
  * Handle: / NMO_c-466048808-20090227-01 / Media: *.
  * Control included file: cash SNA: 23352682865 cash time: 27 February 09 *.
  * SPFILE included: date modified: 26 February 09 *.
  
  
  I'm stuck with what I am doing wrong? Thank you!
  
  Published by: rysalka on February 28, 2009 08:35

  Make a list command to see if the backup controlfile is on the tape.

  RMAN > list backup of controlfile;

  I suggest to read the manual of EMC Networker or call EMC on how to restore the database to another node. I am using Veritas Netbackup, it can be likened to EMC Networke for your reference. There are a few things that must be met when you restore the database to another node:
  (1) (whole DB_ID, you did
  (2) set NB_CLIENT (in your case NSR_CLIENT) on the head node from which the backup was made
  (3) configure the backup server to restore redirection between two nodes.

  I hope this helps.

• SRM and EMC Solutions Enabler

  Hi all

  I'm looking in the options available for implementation of the Site Recovery Manager with EMC Symmetrix storage.

  We are looking for ways to use the Solutions Enabler to avoid the need to directly attach the MRS server to the storage group.

  I can be this misunderstanding, but is it not possible to install the activator of solutions on an ESX host and use this host as a gateway to the table?

  I imagine that if this is how things work then the Activator would install on the Service Console OS within ESX?  Is something similar to happen with ESXi?

  Thanks in advance for any guidance.

  Dave

  Although it was possible to use the ESX host, it is not at all achievable with ESXi.  I personally found that by using a dedicated server to Solutions Enabler and the installation of the client on the server services SRM has been the most elegant implementation.

  Tim Oudin

• SRM and EMC Clarion

  Hi, quick question, I'll implement a SRM environment using 2 emc cx-420, I configured the storage on both sites and set up areas etc, I presented and configured LUNS on the site of production as vmfs volumes

  My question is, you will need to add on the site dr vmfs LUNS before configuring the srm or is there an intelligent process on the replication san adapter to do this

  You will need create a VMFS volume on protected site, this volume get replicated to the recovery site using berries replication technology. When you do a failover LUNS will be published on the recovering site, hba will be reread and the volume will be resigned. I suggest to start reading the pdf RS admin file that contains a wealth of information:

  http://www.VMware.com/PDF/srm_10_admin.PDF

  Duncan

  Blogs: http://www.yellow-bricks.com

  If you find this information useful, please give points to "correct" or "useful".

• SRM and vReplication need help

  Hi all.  We're new here and desperately need help with SRM and vReplication.  We had a case open with VMware, but apparently we are a large enough customer because we've been down for more than 3 weeks with limited (and very limited) contacts with VMware.  Us running vSphere 5.0.1 with self signed certificates and try to install the SRM and vReplication.  After you have reinstalled completely vCenter Server both protected and recovery sites, we have installed SRM in both places.  Currently, we are trying to install and configure VRMS.  Even if we deploy VRMS and are able to connect to the server, the Summary tab never displays the name of the server and the VRM will not accept self signed certificates generated by vCenter and SRM.  Anyone (nothing to do with VMware) can help us.

  Hello

  The message to the attached screenshot - "local and remote servers use certificate methods of trust. ' is generated by the MIS servers due to the different configuration on both sites. I guess that SRM can be modified to use only digital fingerprint matching, but I've not done this before.

  If the VRM servers are configured differently, so that the message would be "method of trust Incompatible certificate used on the server" Server: port ".» Two VRM servers must use the same method to trust certificate. ».

  Kind regards

  Martin

• SRM 5.5 with EMC SRDF. Full recovery but reprotect fails

  Hi all

  I am fairly new to SRM, but have been plugging away in establishing a new environment that uses:

  vCenter 5.5 u1 (two Sites)

  Solutions Enabler 8.0.1.0 - 1953

  EMC SRDF Adapater (SRA) = 5.6.0 VMAX 20 k

  EMC SRDF utilities SRA (and community VSI) = 5.7.0.2

  RS = 5.5.1.8569

  I followed documentation provided by Cody Hosterman ~which is great and got me almost to the end.  I was able to successfully switch (recovery), a virtual machine using a test Stimulus Plan from Site A to Site B. It was working fine.

  We don't use TimeFinder (unauthorized) and so when we realize the expected behavior once happened that the SRDF link has been broken. The State of the R1 to Site A device has become write disabled. The device of R2 in Site B became read/write and the State of the device group is "Fail Over". It is in SRDF asynchronous mode.

  
  

  To try to 'Restore' the group, I see errors relating to the configuration of the storage to reverse direction.

  http://i.imgur.com/zWiGtT5.PNG

  I checked the log EmcSrdfSra as suggested on the site now main SRM server and it seems that there is a mistake shortly after you have created a new consistency group.

  http://i.imgur.com/5hZT8HQ.PNG

  I raised a support call with EMC with it directly as a first port of call, but it is in its infancy so I thought I would ask if anyone has any idea what could go wrong here. I have exhausted my googleFU skills and I'm at the stage of trying to get some eyes on the issue. I am happy to provide more information if necessary or to answer your questions - what someone might have.

  
  Really hope someone can help!

  Thank you!

  Ryan

  Hello

  I got some progress with this so I thought back and share what he needed to solve this problem.

  Essentially, in our environment, we have a VMAX in each site. We have now two servers Manager array with Solutions Enabler (on a Unisphere web) installed. The reason is that we have a VCE Vblock and VCE provided a nursery table server. In addition, we have built our own for the purposes of the SRM and other similar things.

  In essence, we do not configured new servers of facilitators of Solutions fully and missing GNS on them. We have also put in SRDF pairs and above all: GROUPS of DEVICES on the old managers table manually. These groups of devices répliquiez not to the new servers, but the other config (Volumes, etc.) have been! So SRM was trying to talk to our new boxes and only really get half the information on volumes and above all the volume groups.

  Once we have properly configured device groups on each site for the Volumes that were used for SRDF replication, everything started working. Since then, we have been in and double-checked the configuration manager servers on new table and all is good. This solved the problems that I posted above.

  I hope this helps someone in the future!

  Ryan

• Plans test stops with the error 'Array with key "BB0050569F23260000-null" not found ".

  Dear gurus, I hope someone can help me with my problem.

  My SRM 4.0 Lab:

  • two servers vCenter v.4 + SRM 4.0 + EMC_Celerra_Replicator_SRA

  • two VSA Celerra with replication of work

  • two ESXi 4 servers connected to vCenter Server

  When I am trying to perform a recovery of the Test plan, I got the error 'Array with key as NULL "BB0050569F23260000" not found. "

  I guess it's something with recovery VSA, but cannot move forward, as I am a beginner in storaging.

  I've attached screenshots of the box of diag "Configure storage arrays", maybe this will help.

  Thanks in advance!

  without the hotfix SRA, you must rename your celerra VSA on the two sites do not contain not "-" in their names

  Itzik Reich

  Solutions architect

  VCP, VTSP, MCTS, MCITP, MCSE, CCA, CCNA

  EMC²

  where the news concerts

  If you find this information useful, please give points to "correct" or "useful".

• I have an iphone 6 it is damaged by water but I set myself and the person put it on charge and tested it with a multimeter and it worked perfectly but when I went to look for a screen tested on it, it didn't work

  I have an iphone 6 it is damaged by water but I set myself and the person put it on charge and tested it with a multimeter and it worked perfectly but when I went to get a screen tested on it because she does not have the person had not on is it did not work, even if the person has used only flow to correct and get a few corosions out with the replacement of some components of the person responsible for 10 minutes after having plugged in and the battery it wamer so it as I said her test with a multi meter test and he registered 12v and I wondered if something was wrong with it and if I could fix it easily?

  Check the liquid Indcator of Contact.

  Instructions here > liquid for iPhone or iPod is not covered by the warranty - Apple support

  Just so you know, the service of the liquid damage to an iPhone or iPod is not covered by the limited warranty of one Apple or an AppleCare Protection Plan (APP).

• SRM with different DELL/EMC CLARiiON systems

  I have a client who currently owns a Dell Clariion CX300. They seek to replace it with a CX4-120 and would send the CX300 to an offsite location for use as a solution using MRS. DR.

  According to my research, I believe that this solution is possible using EMC RecoverPoint/SE to mirror, both on an IP network, but what is not clear is if I need is more SnapView and MirrorView (I don't think I do)

  HA - that someone does something similar to this before and care to share their experiences?

  Hi Sean

  I am writing as an employee of EMC society UK VMware affinity team. Please see my responses below online

  "I have a customer who currently has a Dell Clariion CX300. They seek to replace it with a CX4-120 and I would send the CX300 to an offsite location for use as a solution using MRS DR. »

  > > > > It is possible - if as you suggest with the CX300 not support MirrorView based SRM (support for this begins with the CX3 family) the only way to achieve consistent SRM and SRM with the CX300 is through the use of RecoverPoint as you suggest

  According to my research, I believe that this solution is possible using EMC RecoverPoint/SE to mirror, both on an IP network, but what is not clear is if I need is more SnapView and MirrorView (I don't think I do)

  > > > > RecoverPoint uses its own capabilities in conjunction with a host, fabric based or CLARiiON based write splitter log all entries available to a designated SAN "volume of the journal. SnapView or MirrorView are required for this

  > > > > the CX3 / generation CLARiiON CX4 supports the separator RecoverPoint CLARiiON that allows these units to split the writings of two VMS with RDM (which is a limitation when using the separator with ESX host - the host splitter only supports Microsoft VMs using RDM - so no support of the SRM) while being able to split the Scriptures volumes VMFS suitable for SRM.

  > > > > fabric database splitting and splitting based CLARiiON are fully integrated with ESX, including support for Site Recovery Manager (in accordance with the comparability of VMware SRM Matrix) as the CX300 supports not the CLARiiON splitter - this gives you the choice of fabric-based splitting of the side DR using something like the Brocade 7600 or the switch Cisco SSM blade or 9222i Fabric my concern with what is the cost of implementation of a fabric RecoverPoint intelligent solution based on the side DR may exceed what the client will budget for his site of DR

  > > > > According to the profile of the ESX data replicated to the site of DR it can be cost-effective to improve unity DR to another CX4-120 and use MirrorView together with SRM or if RecoverPoint remains the preferred - solution have CLARiiON both production and DR site able to support the CLARiiON RecoverPoint splitter

  Let me know your thoughts

  Kind regards

  Alex Tanner

• I just bought a refurbished with Windows 7 computer. I did a test drive of Works 9.0, and lacked features that I found.

  I just bought a refurbished with Windows 7 computer.  On my old XP computer, I used to use Word 97 and later also used a version of works that might have been 2004 (?).  (Usually I only used word processing and Excel.)

  I took a test drive of Works 9.0, and found features that I liked were missing, specifically:

  • Previously with Word I could draw snazzy borders on the table cells, which some had graduated shading that looked almost like a real 3-d picture frame.  These borders changed to something else (rather ugly) when I took an old Word 97 and load in Works 9.0 word processing document.
  • With a table created in Word 97, it was easy to summarize a bunch of numbers that were all stacked in a column (or do other types of math).  Could not do with the Works 9.0 word processor.

  (These features were absent from Open Office as well, or at best have been tedious to use.)

  Word usually has features more and better than the works (such as those mentioned above)?

  Any suggestions on what I should use for word processing? Should not be the latest version, but should be compatible with Windows 7.

  Office 2007 and later nothing will work on Windows 7 but do not expect the full set of features in Office 97. Office 2007 and beyond have their own sets of complete functionality... :-)

  The problem is the purchase of older versions of Office. Microsoft does not provide them and you won't get one of them cheap.

  Corel has always produced WordPerfect... http://www.WordPerfect.com/us/product/Office-suite/?sso_test=true

  Free and Open Office are the alternatives...

• Hello. My creative cloud do not see my plan photos with PS and LR.

  Hello. My creative cloud do not see my plan photos with PS and LR.

  I paid for this and now I have only trial versions I try to reset also say come out and say in but it is the same - it is the only trial versions. Can you help me with this? (I have windows 7)

  Best regards

  Andrzej

  Back to the https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html of the trial

• Move cluster configured with replication SRM and Vsphere

  All,

  We go 2 groups in the near future to achieve a geographical distance between the 2 sites.

  A cluster is equipped with VMware 5.0 replication SRM and vSphere and the other cluster running VMware 5.5 and SRM in combination with replication of vSphere.

  What is the best way to move these clusters, I must stop the replication or interrupt the replication process and are these action to perform on SRM or we need to perform any action on the virtual machine itself?

  I read that a stop is setting the State to not configured including destroy all files in the target directory.

  Does anyone have an experience by physically moving a cluster managed by SRM (and replication of vSphere)

  Any help is welcome

  Thank you

  Gerbert Coolen

  Just pause replication before stop you the VR device on the site target/DR. stop vs break with vSphere replication - VMware vSphere Blog - Articles from VMware