Stimulus to wake you up

Similar Questions

• After you install ios 10 in my ip6, not have menu triggers to wake you up

  After you install ios 10 in my ip6, don't have not menu lift to wake up if it is normal.

  < re-titled by host >

  Hey Sigitpramono,

  If I understand correctly, you have an iPhone 6 and do not see the stimulus to the Wake functionality.
  I recommend you read this article, it has more information on the requirements for features.
  
  

  Recovery in the morning works with iPhone 6s and later.

  Adjust the display settings on your iPhone, iPad or iPod touch - Apple Support

  Thank you for using communities of Apple Support. Have a good.

• Computer brand new-can't get it to wake you up

  Just set up my new Windows7 HP.  Problem is when I leave for a little while he goes to sleep or hibernation (may not know which) and I can not wake him up.  I tried soft boot, hitting all the keys and I always close and start it again.  My manual does not at all on this subject.  Suggests just touch keys.  It does not try not to close the computer down a lot, but at this rate, I do it all the time.

  What Miss me?

  CEDA, go to the control panel and adjust your power settings, especially as thay apply to how long the computer is located before hibernation.

  In Control Panel > Power Options, on the left, click on "change when the computer sleeps."

  Delete the hibernation of choice, to do nothing when you close the lid, etc.

  I had the same problem with my ProBook s 4710, and as I've adjusted these properties, the problem disappeared.

  Good luck!

• iMac trackpad takes forever to wake up

  When I put my iMac to sleep, I have issues with the Apple Trackpad after waking up.

  I can still wake up wake the iMac by clicking on the trackpad, but when the computer wakes up I have no response from cursor of the trackpad. It's like he is disconnected (but it isn't). It wakes you up always not the iMac to sleep and I don't get a message "disconnected" on the iMac in the morning.

  If I wait 30 seconds to a minute, the trackpad works normally. But I never got a message "disconnected" or "plugged in" to the trackpad at all.

  All ideas/solutions?

  You use the Magic Trackpad 2 with El Capitan?   The Magic trackpad 1 can have gaps with El Cap and the new Sierra OS coming, MT2 has quickly become a necessity.

• Wake up from his frozen sleep

  Mac Mini end of 2014. Fusion drive. Last update of El Capitan. Since the last update. My Mac Mini wakes up is more properly from sleep. Keyboard and mouse do nothing. Touch the power button doesn't appear the sign on the screen but the mouse and keyboard - the two Apple's Bluetooth died - no cursor visible. At this point, the only solution is to close with the power button and re boot. Then all is well-

  There are a lot of discussions on this way back. Many of them have observed the sectioning of the speakers - that does not work in my case. There is nothing strange about my setup - Monitor is a DVI connection. Speakers connected to the plug headset, and I have not changed anything other than to keep the operating system up-to-date. So far, I tried to reset SMC, PRAM, delete the configuration of the system and let it re,

  If I put the Mini for sleep in the menu, the pulses of light before for some time and, at this stage, it will always wake up normally but once he goes into a deep sleep (lights out) then he don't wake up.

  It is a huge problem for me because this Mini is in a place where it is a pain to access the power button. Also this is a shared computer, and every time my wife wants to use it, she must switch on the switch.

  As I said, there are many complaints about similar problems, but they don't seem to be exactly the same. At this point, I'd like suggestions.

  1. go to: Apple > System Preferences > Bluetooth > click Advanced... > check 'allow Bluetooth devices to wake this computer ".

  

  If it is already done, uncheck the box and double check.

  2. go to: Apple > System Preferences > energy saver > adjust power Nap.

  

  3. go to: Apple > System Preferences > energy saver > click on planning... > glance to make sure it is not checked or set automatically Shut Down.

  

  4. temporarily connect a USB mouse to the Mac Mini and see if she wakes you up properly.

• HP Slate 21 Pro fails to wake up from its sleep

  Hello

  I had this problem and since I have my 21 Pro slate.  The device will sometimes fail to wake from sleep mode Android or HDMI / PC mode.  This happens when touching the screen to wake you up and when you press the power button to wake.  The power button to become white, but the screen remains blank.

  The only thing I found to resolve so far, it is to pull the power plug and start the unit up.

  Anyone else having this problem?

  The update of KitKat was finally released the HP officially.  It is implemented slowly but if you want just now follow these steps below. It should solve some problems.

  Now my 21 slate is the progress update to 4.4.2 try this step
  
  1 factory reset your slate 21 pro
  2. wait until it has finished
  3. After restart it, set up your slate 21
  4 put to update all your application on google game store
  5. wait util finished all updates
  6. open Configuration and update your slate 21 (it will be very long)
  7. now my 21 tab is updated... If all goes well there is no problem until it ends the 4.4.2 update
  
  Hope it can help you get 4.4.2 os.
  Kind regards.

• dv7-4170us mode 'sleep' will not wake up

  I have a dv7-4170us which is out of warranty and a dead battery. I can't the computer to wake from sleep mode.

  I removed the battery, battery cmos, the hard drive and cd-rom drive. Nothing don't wake you this thing!

  The wifi light is orange, the caps lock is flashing. The mute button is not lit.  Digital lock is not a light.

  Nothing, not even a mouse, is plugged into the laptop.

  Processors go really wrong that often, but it happens. Unfortunately, most people have a portable alternative to plug the CPU in a test.  On the other hand, the Systemboards are less Hardy. If you remove the hard drive and try to boot and BIOS complains that there is no operating system, the BIOS has tested the CPU and it is OK. If it not yet come to this...

  If she wakes with a hard reset it is, unfortunately, usually the end of the line.

• hard to wake from sleep

  I have a brand new fall 2015 27 inch retina with fusion drive imac, running OS 10.11.2

  After a month of use, a problem set at the point.  If I put the computer to sleep, and he remains asleep for a long time, he has trouble waking up to a key on the keyboard or the mouse.  The screen lights up, but elements are not in the office, the screen flashes grey with a graphical glitch in the upper left corner and the computer sleeps again.

  Usually in this case the computer normally wakes you up the next attempt.  Sometimes I try several times.  I tried to reset the SMC and the NVRAM and trashing the plist of power management.  None of this has worked.

  Hi Johnny,.

  Thank you for using communities Support from Apple! I'm sorry to hear that you are having these problems with your new iMac. Looks like you've been on the right track in your troubleshooting. If you continue to have these problems of intermittent sleep/wake, you will find additional steps (beyond those you already took) described in the following article useful:

  If your Mac does not sleep or wake up when expected - Apple supports

  Concerning

• Time Machine do not wake the Macbook to perform backups

  I'm saving a Macbook Pro on a Mac Mini with OS X Server installed. Previously, I supported it up to a USB hard drive connected locally. It is 1 year and Yosemite, can it take hourly backups while you sleep as expected.

  In both cases, Time Machine works fine, except one thing... Hourly backups do not, occur when the computer is in standby. In other words, the Mac does not wake itself for the backup as expected (Power Nap is enabled.)

  I've seen similar to this, other issues involving a UPS connected by USB, but I have no one.

  What I tried:

  1. I did a clean (with format) installation of El Capitan of the recovery partition and did not restore from Time Machine (just dragged my music, photos, documents to their respective homes manually).

  2. I have also reset the SMC and the PRAM without effect on this issue.

  3. I upgraded 10.11.2 and the problem persists.

  4 past of connected locally to target (USB) for a target of network (on OS X Server) without change

  Starting from what a manual backup works perfectly and automatic backups occur as planned then I use the computer (that is, as long as it doesn't go to sleep).

  Energy Saver preferences are using default values, Power Nap is enabled.

  So my question is just... Before I contact support, does anyone know if there is a bug open for this report?  I * have * read the other threads and they speak very precisely a connected UPS number and that a fix was imminent in 10.11.2. The other owners of Macbook having this problem?

  Time Machine wakes you up only the Mac to perform a backup, if the Mac is connected to a power outlet. If you did that, then it might be a bug that I don't know a solution.

• HP pavilion n 204 tx: unable to wake after sleep in window 10

  I downloaded windows 10 yesterday and everything seems to work properly. However, whenever I SLEEP my computer, it is supposed to go to mode "Eve" where a twitch of the mouse wakes you up there. He goes to sleep, but I can't wake up through any interaction with the mouse or the keyboard. The light is still on, indicating that the computer is in sleep, but I can't seem to wake up. I had to hold the power button to turn it on then and I'm sure it's terrible that my computer turns off does not correctly. Everything was fine while I had windows 8.

  Any help would be appreciated!

  Hello @deepak9758,

  Welcome to the Forums of HP Support!

  I understand that you are having a problem of sleep mode and that he wanted to help you!

  For starters, can you provide me with the product number of the laptop?  Here is a link that you can use that will help you find your model and product number:

  How can I find my model number or product number?

  In the meantime, try to review the next steps, posted by Member of the DanG82community:

  1. Download version 9 or 10 of the Intel Management Engine Interface (MEI) driver.
  2. Browse HP Software and Driver Downloads of the site (http://www8.hp.com/us/en/drivers.html) to find the latest driver approved for your model. Filtrer filter by version, select Microsoft Windows 8.1 on the menu drop-down. Find the download in the category 'Driver-Chipset' If a pilot of MEI with a version from 9 or 10 number is listed, download. [9.5.24.1790 version 1.5 M (http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66228.exe) works for most models.]
  3. If a pilot of MEI with a version from 9 or 10 number is NOT listed, download the appropriate driver directly from Intel (https://downloadcenter.intel.com/search?keyword=intel+management+engine). [9.5.24.1790 version 1.5 M (https://downloadcenter.intel.com/download/23091/Intel-ME-9-Management-Engine-Driver-for-Intel-NUC) works for most models.]
  4. Download the Package troubleshooting tool Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
  5. Change the Windows Update Services automatic (delayed start) parameter to the manual.
  6. In Control Panel, select administrative tools, and open Services.
  7. Go to Windows Update and double-click it to view its properties.
  8. Click on stop to stop the service to run.
  9. Change the Startup Type to manual, and then click OK.
  10. Install version 9 or 10 of the Intel Management Engine Interface (MEI) driver. If you receive a warning dialog box about the replacement of a newer version of the software, accept it.
  11. NOTE: You don't need to uninstall version 11 before installing version 9 or 10. The presence of a version of the driver is required to 'upgrade' (or demote in this case).
  12. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates of the Intel Management Engine Interface (MEI) driver. (This will block your system automatically reinstall or display of updates for version 11 of the pilot).
  13. Change back the setting of Windows Update Services to manual automatic (delayed start).
  14. Restart your computer.
  15. Rejoice!  You can finally sleep and stop again.

  Source: Re: how to solve the problems of Post-Windows 10 upgrade on HP laptops

  Please post back with the results.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• Utility EOS don't wake the 1DC

  One of our photographers on the ground with our 1-D-C and has problems with the EOS Utlity.  In fact, it works great except for a key, the software will be not to wake the camerathing.  What I mean is that, while it wakes you up from sleep a half press of the shutter on the actual camera, the shutter in the software button will not.  We are on a new powerbook with 10.8 and the latest version of the utility.  That said, it's our first time taken to view with the utility so it could be something really simple, or it is possible that the 1 d - C is new and not 100% working still.  I appreciate any thoughts and advice.

  Hi mdantzker!

  What you describe is normal.  When the camera turns off or goes to sleep, he is more communication between the computer and the camera, then EOS Utility cannot connect to the camera in order to wake him up.  If there is a problem with the camera myself to sleep, I recommend that you disable the auto-off feature in the menu.  Please follow these steps:

  

• X 220 wake at the opening of the lid

  I know this is pretty trivial, but my X 220 suddenly stopped waking up when I open it. Anyone know how to re-enable the which? I have been in the power settings and others and have not been able to find. Thank you

  The computer wakes you up on the opening in the lid if you put it to sleep by closing the lid. If you used the sleep or Fn + F4 option in the start menu, you have to press the power button. Is he not wake up the open lid if you sleep by closing the lid?

• Vista home PR., after that "sleep" mode, the computer wakes up not (dell inspiron 530)

  Dell inspiron 530 vista PR. House, after the "sleep mode" the computer doesn't wake up. The mouse works fine. (the computer is set to wake you up at a mouse click)  When I click the mouse fan goes up like to spend awake mode, but fan and the power light continues to blink.  I press the power button once and stop the computer, then the computer says recovery and gets stuck again. Then I turn it off again and it completely restarts and the power led will stop blinking and I'm back in business. -arg... Help! Thank you.

  Hello

  You did changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Follow the steps mentioned in the links below.

  The problems of wake the computer from sleep mode

  http://support.Microsoft.com/kb/266283

  A Windows Vista-based computer resumes the mode not sleep if you move or click a USB mouse as the computer is switch to sleep mode

  http://support.Microsoft.com/kb/930091

  Method 2:

  Refer to the section "Why doesn't my computer go to standby or hibernate as expected, or why he wake up suddenly?" the link mentioned below.

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

• Vista wakes up from his sleep by himself

  As the title says, my vista pc wakes up from his sleep by himself. Normally, he'll sleep for 10-15 minutes before you wake up. At other times, it is random and wake up in 2 minutes or 30 minutes. I looked in the forums of countless and tried the suggested solutions, but can not solve the problem. The only thing I found to keep him asleep is disconnected the network cable from the PC or unplug the network cable from the cable modem. I suspect some service or program he wakes up, but I have no idea of that. Here's what I tried:

  I used powercfg command-line command to see which devices have been enabled to wake up the pc. They were only the mouse & keyboard. They are all two peripheral cables usb. I unplugged each separately before you put the pc to sleep and he will still be awake. I use "last_wake" but I just get '0' and in the event viewer it says "wake source unknown.

  I made sure "allow this computer to turn off this device to save power" has been verified for the network adapter in the power management tab. I also disabled the option in the advanced NIC Properties. I also disabled it in the bios. After having done that and the pc wakes up is still what intrigues me the most when I don't know if I unplugged the NIC in the pc go to sleep for hours until I decided to wake up. It is wired not wireless.

  I have that 'sleep' lit. There are no hybrid sleep or hibernation available mode.

  It is vista business so I don't have a Media Center. Media Player is not enabled for sharing files on the network or to pick them up. Media sharing is turned off, and it's only pc's on my network. Also just in the 'media settings' box is configured to allow the pc to go to sleep in power options.

  I checked the Task Scheduler for tasks that can be set for 'wake up this computer' so it can work, but only one of them has this option. It's for multiple monitors and I unchecked the box and the pc wakes up still. I checked for hidden tasks, and the only one I found that could be the culprit was MS RSS. However, after the removal of this pc still wakes up.

  I don't have a sidebar option.

  Windows Update is set on notify me when updates are available.

  I also did a msconfig & selected 'selective startup '. I have uncontrolled startup programs. The pc is still awake.

  Tried to start the pc in safe mode, but there is no option of sleep available to test if it wakes you up from his sleep in safe mode.

  Last but not least is when the pc is wake up he's going to sleep again within 2 minutes.

  As you can see I tried everything I could think of without much success. Can someone tell me something again or that I have not tried?

  I have no idea what you're trying to do, but here's what I found my problem. I have a motherboard intel. Although I disabled "wake on lan" both vista & bios there was yet a 3rd parameter I was not aware of. He was set apart from the bios or vista. It is a framework of intel in the 'management engine interface' if I remember correctly. It is accessible after the bios option and before loading windows. Once I turned it off my pc stop, out of sleep. So, if you have a motherboard intel, then that is your problem.

• Pavilion g6t locked up, while you sleep, when you close the lid, or try to power off

  My Pavilion g6t crashes when the screen turns off, or computer goes to sleep, also is not out with stop-power function.  Power light stays on, only is to restart the computer to completely turn off with power button / stop, and then re login.   This happened just after a HP recommended Refresh, any ideas?

  I went back to the HP driver downloads support and ran an another Bios Update.

  Alto, the computer began to work properly, the screen will be lite to the top of the keyboard.

  Once asleep, wakes you up by button tapping power and computer stops correctly.

  HP/Microsoft should seek to solve the problem of no compatibility with Bios level and

  other 'stuff' in the computer.

  Thank you

  Glenn