STOP: 0x0000008E (0x00000005, 0x8244B514, 0xB131E774, 0x00000000) error on Windows Vista after hard stop.

Similar Questions

• Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.

  Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.  I tried all system tools and I get nothing and the only point of system restore in the restore SP1 update. not the best at the command line and even worse to system32 please help I need the laptop in return

  Hello

  1. when exactly you get this error message?

  2 are you able to boot into the office after getting this error on blue screen?

  3. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps.

  Method 1: Try to start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: If the problem persists, then try to run the Startup Repair tool.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  Hope this information is useful.

• Error 1720 windows vista, try to install to my MiFi2200 VZAccess Manager

  Error 1720 windows vista, trying to install VZAccess for my MiFi2200.Is Manager it a vista problem, cannot even locate windows install for Vista, where he's spent all day on this MiFi and Vista error 1720, it sucks

  http://support.vzw.com/CLC/

  First thing to do is to contact the Support of Verizon at the link above.

  See you soon. Mick Murphy - Microsoft partner

• I can't install (error says Windows Vista not supported (LR6), I use Windows 7 SP1 worms. 6.1 What is the problem?)

  I can't install (error says Windows Vista not supported (LR6), I use Windows 7 SP1 worms. 6.1 What is the problem?)

  About Vista, but is not https://forums.adobe.com/thread/1836232

• an error has occurred. Please save your work and restart edge animate. -error in windows 8 after t more

  an error has occurred. Please save your work and restart edge animate. -error in windows 8 after more than months of use.

  Someone knows how to fix this? I reinstalled the software and it did not help. I rebooted the computer between uninstal and instal. Software comes from creative cloud with subscription. I'm in the middle of the project, and it is difficult to switch between computers...

  You can try opeing the file .html instead of .a project file?

  Open edge animate.

  File > Open and navigate to the project folder and select the .html.

  If successful, file > save. If successful, I would also recommend file > save to a new folder (other than the current one) as a backup location.

  HTH

  Darrell

• Stop: 0x0000008E (0x00000005, 0x95ae939E, 0x8a9ddc68, 0x00000000) __win32k.sys - address 95ae939e base at a 95, 20000, datestamp 4 a 856629

  error messages and blue screen

  Hello

  Update your driver, BIOS and any software of control and then work through the troubleshooting services
  above if necessary.

  Could be a nuisance pilot. Update your drivers manually looking at system manufacturer and
  Sites of the manufacturer of the device.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
  Then, get new ones manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• verification of error 0x0000008e (0xc0000005, 0x00000001e, 0xad6c6efc, 0x00000000) to start Windows.

  Original title: error checking 0x0000008e (0xc0000005, 0x00000001e, 0xad6c6efc, 0x00000000)

  I'm bugcheck force a reboot on startup...

  error is: error checking 0x0000008e (0xc0000005, 0x00000001e, 0xad6c6efc, 0x00000000)

  What is the problem and how can I fix?

  Hi Hal_Y,

  You are able to start correctly on the desktop?

  If you are able to boot to the desktop, you can follow this link & check if the problem persists:

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  Hope the helps of information.

• Stop error c0000135 win vista after automatic update

  family system-vista premium, I just got an automatic update this morning and was invited to restart my computer restart he went as far as the bit of microsoft, then I have now, I get a screen saying blue STOP: C0000135 (can't find the component) this application has failed to start because... then there's a load of letters that do not exist on the keyboard
  they are something like this... "YU, F¬OPYOHYY. DLL was not found. reinstalling the application may fix this problem, which then automatically restart new... it won't do anything else.

  I'm baffalled as to what happened to ideas or help would be great

  see you soon

  Hello

  Try Safe Mode - several times, press F8 that you start.

  Do a restore of the system to a point before that happened

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  ===========================================

  If it is still stuck in Mode safe:

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.

  Rob - bicycle - Mark Twain said it is good.

• Errors on Windows Vista KB2470478 ESENT

  I am running Windows VISTA Ultimate SP2.  I've had this laptop for about 4 years and have upgraded memory and drives without incident selection until I recently updated to a new 1 TB of HARD drive.  I now receive errors of ESENT this update of Windows and all programs that through this link are broken.  This research I found this all traces to have need KB2470478 FIX for the HARD drive is new and uses the Advanced Format.  However, I can not install the PATCH because Windows Installer now receives an error 0xc8000222.  This seems to be an error of round robin in this Windows Installer needs to Windows Update which needs ESENT, but can't use it because the new hard drive is an advanced Format and now requires the FIX...

  How can I get this fix installed without losing everything from the past month?

  Reformatting or reinstalling is not an acceptable answer since this is specifically related to the use of the hard drive again.

  Here are the steps I used to solve this problem.

  First of all, I found that there was a more recent patch available

  http://support.Microsoft.com/kb/2553708

  1. download the hotfix and copied to a USB key and stop the machine.
   
  2. change drive hard outside in the original and kick up.  Connected and installed the fix. (Must restart)

  3. after the restart, reconnected and copied the esent.dll (6.0.6002.22531) of C:\windows\system32 on the USB key and stop.
   
  4 has changed the hard drive to the new and booted up.  Connected and started an elevated command prompt (start in the C:\windows\system32 directory).
   
  5 type the following commands, where user_name is my administrator account on the system:
   
  takeown /f esent.dll
   
  ICACLS esent.dll/Grant UserName:F
   
  ESENT.old esent.dll Ren
   
  6 copied the esent.dll from the USB key in the system32 directory and restarted.
   
  7 connected and successfully launched the fix.  Restarted after fix and machine booted up without error and I was able to successfully launch Windows Update and application log is error-free.

• error on windows vista \Device\Harddisk2\DR2

  I keep coming up with the error for many programs, I try to run, some wont even load due to this no matter how many times I click on try again or click on continue he keeps coming up with this error.

  Please find a solution to what its stopped me using several programs properly and caused my hardrive go bluescreen and go in a physical memory dump.

  Hello

  ·         When you get this error message?

  ·         What changes have been made to your computer before the problem?

  Method 1:

  Try to run the check disk for errors and check if it helps:

  Check your hard drive for errors

   http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Method 2:

  Change the assignment of drive letter for the removable a drive letter other than C.

  To change drive letter assignments in Windows vista, follow these steps:

  (a) connect to the computer as an administrator.

  (b) insert a disk in the removable drive.

  (c) click Start, right-click computer and then click on manage.

  (d) click on disk management.

  (e) right click on the partition, logical drive or volume that you want to change and then click on change drive letter and paths.

  (f) click on the removable drive, click it, click on change, click the drive letter that you want to use, and then click OK.

  Read more here:

  Change, add, or remove a drive letter
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  Hope this helps,

• Problem message 66 a updated windows and performace error on Windows Vista

  Original title: windows update error

  I have problems to download windows updates.  I bought new spyware, PC unleashed and already have Norton. I tried everything I could think of to fix this.  I changed the settings, cleaned records etc. nothing works.  Considering that I know almost nothing about IT, I'm there winging.  My computer is Windows Vista Home Premium, 32-bit.  It's a gateway bought about 2 years ago.  He sometimes stops for no reason (no blue screen of death again).  I am desperate to solve this problem, but reluctant to take it to a computer repair store.  I tried Microsoft Fix Center several times and tried different repairs but still nothing.  Don't know what happened but suddenly, the computer is slower and updates do not work.

  I'm afraid to do too much fear I may damage my computer or worse.  I received the error 66 has time and time again.  I have received various messages which have failed since April but didn't know it was because my computer was always a small icon of security under the start menu that tells me to stop and install the updates so I could do this after I was using the computer think he was installing updates , but obviously none of them.  Now I can't even count how many updates have not been installed.

  Due to the scans, I have ran, it was said that my computer has high speed, a lot of RAM etc... but I have problems of instability.  It makes me wonder if it's something personal! Laughing out loud

  I would appreciate any assistance available.  Thank you.

  Robin

  Hi Robin,

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Run the fixit available in the link below to reset windows update components.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Method 3: Follow the steps described in the section below and then check if it makes a difference

  Error code '0x8007066A' when you use the Windows Update Web site or Microsoft Update to install the .net Framework update:
  http://support.Microsoft.com/kb/2507641/

  Method 4: check the logs in Event Viewer for more details on the shutdown problem

  Open event viewer

  What are the information in event logs? (Event Viewer)

• Error KERNEL STACK INPAGE ERROR on Windows Vista SP2 blue screen

  Original title: KERNEL STACK INPAGE ERROR

  What can cause a crash with the KERNEL_STACK_INPAGE_ERROR message in a blue screen.  Ive had just a new hard drive installed.  Running Vista Home Premium with Service Pack 2.  Usually occurs when returning from standby or Hibernate mode.

  Hi JerryHines,

  This problem can occur if a requested page of kernel data could not be read on the paging file into memory, or the master boot record is infected with a virus.

  Method 1:  I understand that you have installed a new hard drive, run the disk check to repair bad sectors on your hard drive

  Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Method 2:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3: Disable and re-enable the hibernation, see them steps outlined in the article below

  How to disable and re-enable hibernation on a computer that is running Windows

  http://support.Microsoft.com/kb/920730

  For more information, please visit the link below

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  http://support.Microsoft.com/kb/950686

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  (Article applies to Windows 7, not valid for Windows Vista)

• Error: 0XC004F050 Windows Vista Home Basic product key is not valid for activation

  I bought this dell laptop 2 years. my laptop is to sometimes have blue error screen, but when I restart it, allows it to function normally. recently, when I turn on my laptop, my screen goes black and a box come up saying that the Windows Vista Home Basic product key you typed is invalid for activation.
  

  Then he gives me 3 options
  1. access your computer with reduced functionality
  2. enter a different product key
  3. contact Microsoft to help solve this problem

  I was trying to enter the product key as indicated on the sticker attached to the bottom of my laptop but still invalid product key. Code: 0XC004F050

  I had

  Diagnostic report (1.9.0027.0):

  -----------------------------------------

  Validation of Windows data-->

  Validation status: invalid license

  Validation code: 50

  Validation caching Code online: n/a, hr = 0xc004f012

  Windows product key: *-* - 4WD8X - M9WM7-CH4CG

  The Windows Product Key hash: EkdqJZ28Y9zyrh7DU/lHNjTXlQY =

  Windows product ID: 89572-OEM-7332166-00096

  Windows product ID type: 2

  Windows license Type: OEM SLP

  The Windows OS version: 6.0.6001.2.00010300.1.0.002

  ID: {B353C367-9E97-407C-A335-269CB0707324} (3)

  Admin: Yes

  TestCab: 0x0

  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Product name: Windows Vista (TM) Home Basic

  Architecture: 0x00000000

  Build lab: 6001.vistasp1_gdr.100608 - 0458

  TTS error:

  Validation of diagnosis:

  Resolution state: n/a

  Given Vista WgaER-->

  ThreatID (s): n/a, hr = 0 x 80070002

  Version: 6.0.6002.16398

  Windows XP Notifications data-->

  Cached result: n/a, hr = 0x80004005

  File: No.

  Version: N/a, hr = 0 x 80070002

  WgaTray.exe signed by: n/a, hr = 0 x 80070002

  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->

  Caching the result: 103

  Version: 2.0.48.0

  OGAExec.exe signed by: Microsoft

  OGAAddin.dll signed by: Microsoft

  OGA data-->

  Office status: 103 blocked VLK

  Microsoft Office Enterprise 2007 - 103 blocked VLK

  OGA Version: Registered, 2.0.48.0

  Signed by: Microsoft

  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->

  Proxy settings: N/A

  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)

  Default browser: C:\Users\Tien Siew\AppData\Local\Google\Chrome\Application\chrome.exe

  Download signed ActiveX controls: fast

  Download unsigned ActiveX controls: disabled

  Run ActiveX controls and plug-ins: allowed

  Initialize and script ActiveX controls not marked as safe: disabled

  Allow the Internet Explorer Webbrowser control scripts: disabled

  Active scripting: allowed

  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->

  Office details: {B353C367-9E97-407C-A335-269CB0707324}1.9.0027.06.0.6001.2.00010300.1.0.002x 32*-*-*-*-CH4CG89572-OEM-7332166-000962S-1-5-21-2878899211-3288161655-3842348923Dell Inc.. Inspiron 1420 Dell Inc.. A07 20080203000000.000000 + 00034303507018400EA04090409peninsula malaise Standard Time(GMT+08:00)03DELL M08 103103Microsoft Office Enterprise 200712fFic3JgCreGGRxyF8uMWB4R4Jcg =89388-707-1528066-6588114 ACD7202654E586

  Content Spsys.log: 0 x 80070002

  License data-->

  C:\Windows\system32\slmgr.vbs(1635, 9) (null): 0xC004E017

  Windows Activation Technologies-->

  N/A

  --> HWID data

  Current HWID of Hash: PAAAAAEABwABAAEAAQABAAAAAwABAAEAnJ80kiKfGtPqTSSWoFyuf/yQRoPeS1K88vTm9 + 9aSGmsViqF

  Activation 1.0 data OEM-->

  N/A

  Activation 2.0 data OEM-->

  BIOS valid for OA 2.0: Yes

  Windows marker version: 0 x 20000

  OEMID and OEMTableID consistent: Yes

  BIOS information:

  ACPI Table name OEMID value ValueOEMTableID

  REFERENCE DELL M08 APIC

  FACP DELL M08

  HPET DELL M08

  STARTING DELL M08

  Original title: my windows vista Home Basic product key is not valid for activation

  MCFG DELL M08

  M08 DELL SLIC

  SSDT PmRefCpuPm

  How can I solve the problem? Thank you.

  Run the Diagnostics of Genuine tool at this link http://go.microsoft.com/fwlink/?linkid=52012.

  Hi steph_ts,

  In addition to the suggestion of Andre.Ziegler, following links and check

  1. you remember to make changes to the computer before this problem?

  You can consult the following KB articles and try the suggested methods for error: 0XC004F050

  How to troubleshoot the error codes Activation Volume Windows 7, Windows Server 2008 and on Windows Vista computers

  http://support.Microsoft.com/kb/938450

  Error message when you try to activate a copy of Windows using the Windows Activation Wizard: "the Software Licensing Service reported that the product key is not valid: 0xC004F050.

  http://support.Microsoft.com/kb/950756

  Also see the following link for more information about reduced functionality mode:

  Error message when you start Windows Vista: "your activation period has expired".

  http://support.Microsoft.com/kb/925616/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Impossible to reinstall Lightroom 6 retail DVD.  Gives the error message "Windows Vista not supported."

  After a horrible experience with the upgrade of Windows 10, I re-installed Windows 7 Pro and had to reinstall all my programs.  When I try to install the retail DVD of Lightroom 6 version, I got and error message that Lightroom does not support the Vista operating system.  This is NOT Vista; It is Windows 7 Pro x 64 SP with installed updates.  Installation stops there and will not continue!  I then reinstalled my old version of Lightroom 5.2 (who has updated to 5.7) without problem.  How can I bypass the installation process that incorrectly detects Vista?

  Thanks for any help you might be able to give me.  I really miss my 6 LR!

  Hello

  Try to force ambient light Setup to run in Windows 7 mode:

  Right-click on the Setup file and select Properties option.

  Then click on the Compatibility tab.

  The value of the Windows 7 operating system and check.

  This link can also help: try to install lightroom 6 on windows 7 get interface requirement not met windows vista not supported

• Drivers error recover Windows Vista on Satellite A200

  Hello

  I replaced the HD of my Toshiba Satellite A200. Replicate the original drive of partitioning in the new drive and installed the original SO (Windows Vista) from the recovery disc.

  Everything was fine. However, when I booted Windows for the first time, he could not put an end to the automatic configuration phase. An error message appears on the screen: he had been unable to find all the drivers it needs.

  After accepting the error message, windows has restarted the system without giving me no chance.

  Can anyone tell me what was wrong with the Windows recovery process?
  How can I add the necessary drivers or skip the process of autoconfiguration to do more later?

  Unfortunately, no one can say with certainty what went wrong.
  Please set the BIOS to the default settings and try to install recovery image once more. It will be interesting to see if the same problem occurs again.