stop image flicker

Similar Questions

• How stop imagies to record traffic.

  How stop imagies to record traffic. I have only 200 MB per month. This is 38.0.1 version.
  Sorry for my languige? I'm not American.

  • Image block: https://addons.mozilla.org/firefox/addon/image-block/
  • ImgLikeOpera: https://addons.mozilla.org/firefox/addon/imglikeopera/

• Stop, image, Firefox

  Hello

  I have a file in flash with 2 images and a 'Stop' script: it does not work in Firefox if there are specific images, I don't know what they have. But it works fine in Flash Player and Internet Explorer. Here is the flash file (this is a simple example):

  http://puckrules.altervista.org/example.fla

  http://puckrules.altervista.org/example.swf

  The film should go to the 'cartoon' image (image 3), but in Firefox, it stops at the green image (image 2) due to the image on the frame 3, if I use another image it works fine. Here are the problematic image:

  http://puckrules.altervista.org/1.jpg

  What is the problem?

  I have Firefox 3.6.10 (latest version) with the Flash plugin updated (10.1), on Windows XP.

  
  Thanks in advance.

  Add this code to the first frame and it work very well shud

  Stop();

  this.onEnterFrame = function()

  {

  {if (this.getBytesLoaded () == This.getBytesTotal ())}

  this.gotoAndStop (3)

  };

  };

  See you soon,.

  Sriram

• fade and STOP images

  Hello
  I use this code below is to blur the images. How can I have them "stop during 3 sec" and continuing to discoloration?
  Any help, please.
  Thank you
  
  Stop();
  This.banner_clip_1._alpha = "100";
  This.banner_clip_2._alpha = '0 '.
  This.banner_clip_3._alpha = '0 '.
  This.banner_clip_4._alpha = '0 '.
  This.banner_clip_5._alpha = '0 '.
  This.banner_clip_6._alpha = '0 '.
  This.banner_clip_7._alpha = '0 '.
  This.banner_clip_8._alpha = '0 '.
  This.banner_clip_9._alpha = '0 '.
  This.banner_clip_10._alpha = '0 '.
  This.banner_clip_11._alpha = '0 '.
  This.banner_clip_12._alpha = '0 '.
  This.banner_clip_13._alpha = '0 '.
  var speed = 2;
  mctoFade = 2;
  Christine = setInterval (fadeF, 40);
  thisMC = this;
  function fadeF() {}
  If (mctoFade < 13) {}
  nexttoFade = mctoFade + 1;
  } else {}
  nexttoFade = 1;
  }
  thisMC ["banner_clip_" + mctoFade] ._alpha = speed;
  thisMC ["banner_clip_" + nexttoFade] ._alpha = 100-thisMC ["banner_clip_" + mctoFade] ._alpha;
  If (thisMC ["banner_clip_" + mctoFade] ._alpha < = 0) {}
  thisMC ["banner_clip_" + mctoFade] ._alpha = 0;
  thisMC ["banner_clip_" + nexttoFade] ._alpha = 100;
  mctoFade = nexttoFade;
  }
  updateAfterEvent();
  }
  

  Try:

• Video without stopping on the last image, when the splash screen appears

  I'm having what looks like a subtle bug in v20. I have an application one question. The opening in a 7 second video screen. I have a MSO under the video, which is set to auto-play, every 2 seconds, play 1 time, finally stop image. The first State of the DSO is a black screen (to match the beginning of the video), and the second State of the ASM corresponds to the last frame of the video.

  I did this same technique many times before, and it worked fine. It works perfectly here when I preview the app in the content viewer. But when I built the app and view the developer app on my iPad, something funny happens:

  The first time you run the application, the startup screen appears of course while the application loads into memory. Then the video opening plays, but when the video is finished, a black screen (probably the first State of the DSO). Whenever you come back on the video, the same thing happens.

  But, if I glisser drag on the third screen, quit the application and then go back into the application, then the opening video and the mso works perfectly. Until I double click the home button, remove the application from memory and run it again fresh, then the startup screen and then I can repeat the problem.

  This smells like a bug to me. Any ideas for workarounds that anyone can think?

  Have you tested it on the iPad? There has got to be a v23 folio in a viewer v23 on an iPad or an iPhone.

• Duplication of images

  I just bought lenovo laptop Z570. Configuration: i5, 4 GB ram, I GB nvidia, dos mode... Bit installed windows 7 ultimate 32... installed all the drivers including Intel graphics & nvidia graphics... What bothers me is that images of other part of the screen overlay or should I say it sparkles, but when I played video games like NFS UNDERCOVER or played, it works fine without any overlap (or any other error)

  How would stop this image flicker or overlapping... Please help me

  I suggest you visit the download page for bios or graphics card updates. Additionally, if you have the support of the switchable graphics card, try to pass cards.

• Windows 8 guard flicker after refreshing the computer

  Original title: Guard split windows environment

  My laptop is windows 8... environmental windows guard flicker like a jump of frame if you play video games.  If im watching a movie in full screen it forces the application to exit the full screen also while playing games like fifa it minimizes by itself, as if you're in an environment like say the documents or any folder, you would see the image flicker as if you click outside the environment and click back on it in a few seconds. I don't know what's happening or why it does this.  Everything started after I made the option "refresh your pc without affecting your files.

  Hi Victor,

  Thanks for the reply.

  Method 1:
  You can install all Windows updates available including the optional updates and check if it helps.

  Method 2:

  If the problem persists, I suggest to start the computer using safe mode and check if the problem persists or not. If the problem does not occur in Mode without failure, you can set up your computer in a clean boot and check if it helps.

  
  Step 1:
  Start the computer in safe mode. At the start of the computer Mode safe with the minimum set of drivers and files.

  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  If the problem does not occur in safe mode with network, try step 2:

  Step 2:
  Set up your computer in a clean boot state. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• help stop!

  I am tring to create buttons that allows to scroll a clip, and once he gets to the last clip it to start at the start element. The button is to stop on each image and then move to the next when you click it.

  I use Action Script 2 in CS5.5

  My configuration is:

  in scene 1, I have a clip, the inside is 2 layers, first layer is AS with frame 1 with stop(); in it. Second layer is 4 (one in each image) figure I want to scroll.

  Return to scene 1, I created another clip from movie with two arrows on it. Inside that clip, I have 3 layers. First ACE layer with stop(); Image 1.

  Second layer is the left button (took the arrow graphic and converted to the button) I copied about 4 frames. I clicked on each button and entered the scripts below:

  Frame1 btn:

  on (release) {}

  _root. Markings.gotoAndStop (4)

  }

  2 btn framework:

  on (release) {}

  _root. Markings.gotoAndStop (1)

  }

  3 btn framework:

  on (release) {}

  _root. Markings.gotoAndStop (2)

  }

  Framework 4 btn:

  on (release) {}

  _root. Markings.gotoAndStop (3)

  }

  I did the same for the arrow key to the right on a 3rd layer, but this time wrote:

  Frame1 btn:

  on (release) {}

  _root. Markings.gotoAndStop (2)

  }

  2 btn framework:

  on (release) {}

  _root. Markings.gotoAndStop (3)

  }

  3 btn framework:

  on (release) {}

  _root. Markings.gotoAndStop (4)

  }

  Framework 4 btn:

  on (release) {}

  _root. Markings.gotoAndStop (1)

  }

  So, theoretically, it should work right? But it doesn't! The left button will that Frame 4 and the right will only image 2, it does not play the clip that keeps the buttons. I tried to put the stop(); code on all frames, but that did not help either.

  Is this something really stupid that I'm missing? Any help would be greatly appreciated!

  Nevermind, of course I understand it after you posted this! XD

  I had to say to each button to also advance the arrow in each frame clip, which I had not done so he is stuck on the first image in the film.

• Stop does not work

  Hi all

  I'm a flash banner which consists of a particular frame that stops for 5 seconds and then proceeds to the next frame and etc. I got this to work, but there is a problem. I have six buttons for each banner and I MouseEvent.ROLL_OVER connected to them. Each roll above indicates a specific Stop image so that the user can click on the banners to go to a specific page. She did this, but the banners continue to pause for 5 seconds and skip to the next section.

  Layer Actionbtn

  btnButton01.addEventListener (MouseEvent.ROLL_OVER, graphimatorHandler);

  function graphimatorHandler(event:MouseEvent):void {}

  gotoAndStop (2);

  }

  and etc.

  Actions layer

  Stop();

  function wait01() {}

  Play();

  }

  setTimeout (wait01, 5000);

  I thought of another solution to the problem, but it was a disappointment. I added an Event.ENTER_FRAME within the mouse event and it stops at this framework; However, if you place the cursor button 1, button 5 button 3 for example, the banner is not clickable. You must click on the banner times 10 + so that it can proceed to a page.

  Layer Actionbtn

  btnButton01.addEventListener (MouseEvent.ROLL_OVER, graphimatorHandler);

  function graphimatorHandler(event:MouseEvent):void {}

  gotoAndStop (2);

  mcGraphimator.addEventListener (Event.ENTER_FRAME, stopGraphimatorHandler);

  function stopGraphimatorHandler(event:Event):void {}

  gotoAndStop (2);

  }

  }

  Is there a way I can fix this? I hope this will make much since.

  Thanks in advance

  LMBKnowles

  
  

  IF you are looking for setTimeout in the help documents, you will see that it returns a uint value when it is instantiated.  If you just need to assign a uint variable to capture.

  var sto:uint = setTimeout (wait01, 5000);

  And then in your clearTimeout() call don't you use this variable uint argument to identify the setTimeout...

  clearTimeout() (sto);

• Desire X 2

  How can I stop the flicker of screen it's happened twice in less than two months, then turns off completely and takes several boots before working again. Battery is fully charged and it's only 8 weeks from purchase

  Much appreciated response however I have been in contact with technical support by phone (very useful) and it seems that it can be hard drive failure, so he returned for repair

  response appreciated tho-thanks

• Satellite A65 freezes and does not answer after adding RAM

  Gents,

  My laptop Satellite A-65 has been upgraded to 512 MB RAM 1024 RAM. He acknowledged additional without any problem memory (as she should be determined according to the manual).

  But unfortunately after 1 day it started suddenly stops, images on the screen freezes, laptop does not at all - only reset (press and hold the power button / stop) can help. laptop computer sometimes is able to work 2-3 hours, but still stops.

  Cover of place of memory is rather hot, fan very often work uninterruptibly. so I can't decide if the problem is in the new map memory or not enough cooling or maybe by changing the version of BIOS (or BIOS setttings) and could be memory saturates and erases itself properly (last note was found on the forumes).

  Experts, to help find the exact reason especcially if you had the same problem.

  Hello

  I m not an expert, but I recommend you remove the new memory module and run the laptop only with the standard memory module.
  If the laptop does not cling and will not freeze then it s a very clear case for me.

  Either the second module is not compatible or defective.
  In my opinion, you need to use brand modules such as Kingston for example. The quality is much better as a module without a name.
  Use additional modules recommended by Toshiba

• Focus on the t3i problem

  My t3i is having focusing problems. What may be the cause?  Can I have very well to the development as on fullframe cameras?

  Kolourl3lind wrote:

  OK I'll do it, but I just realized maybe it's because I'm zoom after focus and recompose?

  Yep - most of the lenses are "varifocale" - which means that if you focus carefully on a subject at a few focal length in the range of zoom... then zoom to a new lens, then your topic will be specifically developed in the.  You must refocus the goal.

  There are a few lenses that are "parfocal" - means that if you zoom the lens after update, your subject will always be precisely focused.  However... VERY FEW lenses is technically "parfocal" (even if some are close).

  The lenses I know who are "parfocal" are:

  • EF 16-135mm f/2.8 L USM
  • EF 17-40mm f / 4L USM
  • EF 70-200mm f/2.8 L USM (only the non)

  That's all.  If you use any other goal, he must refocus the goal after a zoom.

  But I also noticed that you were aiming at 1/15 sec.  It's a little slow, but you were at 18mm (which helps).  Here is the guideline on this.

  In the days of 35mm, there was to be a general rule that if the shutter speed is equal to, or faster than 1/focal length (e.g.. If the shot at 50 mm from you would be at least 1/50th sec at 70 mm you would be at least 1/70th or more fast, etc) would be appropriate.  This number does not apply to your T3i, but I'll be back in a moment.

  But there are some caveats with this...

  First, it assumes that you use actually very good camera-technical operation and you really WANT to be stable.  Good camera-technical operation means that you support the camera down - usually your left is the palm-up supporting the bottom of the camera and lens and your elbow is in verse your chest/belly.    Your weight is centered between your legs and you have a wide position.  This means that you are not leaning so your muscles must work hard to stand and your weapons as a brace to support the camera to your body and, of course, your body is well balanced and stable.

  Secondly, it is just a 'guide' - not a rule.  Some people are apparently able to be more stable than others (and if caffiene makes nervous and you just drank a coffee... and all that sort of thing.)  And it takes some practice to learn the proper technique.

  Thirdly, it is also not the same for the cameras (like your T3i) APS - C sized sensor.  To make the camera, you would have to the multiple minimum speed by the crop factor of the camera.  For a Canon APS - C camera is 1.6 (but if you wanted to use 1.5 which would be close enough.)  That means 50 mm instead of using 1/50th you would actually use 1/75th (technically 1/80th if we use the factor 1.6).  for example 50 x 1.6 = 80 so for 50mm, we would use 1/80th.

  If you have a goal that includes image stabilization, so you can be able to pull a little slower.

  Image stabilization in most claims to improve the stability of the lens of 2 to 4 "stop".  Does that mean that you can reduce the shutter speed... two to four times slower that you would normally need the lens because stabilizes for you.   But more caveats apply because it is not as simple as 'get you 4 stops.  The stabilization is not a guarantee... that's just a liklihood.  If it were to be less ambitious to stabilize your shot he will be much more likely to succeed.  If she must be more ambitious to stabilize your shot, then he'll do it is better... but there is no guarantee that it will work.

  You were aiming at 18mm.  So, if you use technical excellent posture and camera-operation but don't have image stabilization and that you are the one "average" trying to hold the camera steady, then we multiply 18 x 1.6 and go down to 28.8.  There is no shuter speed 1 / 28.8th so we turn to 1/30th (because there is a 1/30th.

  1 stop slower than 1/30 is 1/15th, and image stabilization is probably enough to make you slower 1 stop successfully.

  2 times slower is 1/8th.  Image stabilization that claims "4 stops" will be generally well 2 stops.  So it is less than a sure thing, but he tilt the odds in your favor.

  3 times slower is 1/4 sec.  At this point, you are pushing the image stabilization system... you will notice that if you shoot a lot of frames, the rate of "keeper" (tips, you like) will be lower, but you will see that you have found some.

  4 times slower is 1/2 sec (based on the basis of 1/30th for a focal length of 18mm on an APS - C size sensor device).  If you press any stabilized lens image 4 stops, don't expect to get a very high rate of keeper.  It will help you sometimes, but you have to accept you are really be ambitious in your expectations.

  This is image stabilization by the numbers... take the focal distance, multiply it by your crop factor (which is always in 1.6, but if you want to use 1.5 because it is somewhat easy to do this calculation in our head that's close enough), round up to the nearest available shutter speed.  If you have image stabilization that you can speed up the shutter speed of 1, 2, 3 or 4 times faster... but every time you get more ambitious your chances of obtaining 'gatekeepers' go down (but it is better than without image stabilization at all.)

  The summary is that your minimum shutter speed (assuming good holding technique and you're stable, etc etc) with stabilizing image out of the 1/30th would be your minimum speed.  At 1/15 sec am that you relied on 1-stop image stabilization help.  The lens image stabilization technology is good enough so that 'most of the time' it will probably be able to do (not guaranteed... only likely.)  If you were NOT using a good posture and technical outfit... you can be difficult to your image stabilization system to try to keep up.

• Scrapie screen after the ignition of his sleep.

  I recently bought the HP Pavilion dv6-6102AX notebook PC. With AMD A8 - 3530MX APU, Dual Graphics with Radeon HD 6220 G and 6750M, 8 GB of RAM and 750 5400 RPM HARD drive, running under Windows 7 64-bit.

  I updated the software of the laptop, for example, by using Windows Update, but I did not update the graphics driver again, when I go to the main site of AMD to download drivers, it says.' ... your hardware/software is incompatible. I checked for my drivers on the HP site but it is not found. (The model dv6-6102AX is not listed on the sites of HP).

  Can someone help me?

  Thank you.

  The model is now listed on the HP site, the site for drivers are:

  http://h10025.www1.HP.com/ewfrf/wc/product?product=5131405&LC=en&cc=au&DLC=en&lang=en&tmp_track_link=ot_we/prodlink/en_AU/5131405/loc:0 & cc = AU

  Downloaded the latest drivers (graphics card) and the stop screen flicker afterwards of his sleep.

• The update of Flash Player 20.0.0.267 caused horrible sound and problem of instability in my application scare users.

  The update of Flash Player 20.0.0.267 in Chrome/Firefox/Adobe-Flash-Player, under specific environment which we have already applied in thousands of SWF files, we find 1) unable to stop playing the sound which is placed on the timeline by ActionScript "this.stop" in our running game and 2) it could also cause several sounds playing simultaneously causing a loud noise and crash suddenly on browser just in few seconds.

  I did a test to demonstrate the problem (but not limited to this case, in fact):

  1. in Adobe Flash Professional CS 5.5, start a new project of the 'New project' with the help of "ActionScript 3";

  2. in the chronology of the scene, make sure we extended to exactly 2 frames;

  Note: '2 images' are a must.  The bug does not occur in "image 1" or "3 frames.

  3. in the area of the stage, create a Movie Clip symbol, namely "symbol 1;"

  4. in 'symbol 1', value 3 layers with timeline length about 30 images;

  5. at the 'symbol 1', adds a rectangle to the keyframe in the layer 1 1, add a command Action "this.stop ();" image key 5 in layer 2, and set the "Sound" to key 10 in layer 3 image using any MP3, Sync-mode 'Stream' and 'Repeat' file, then close "symbol 1" music video;

  6. make sure of course that the '1' symbol is placed in the stage space, and then save.

  7. publish the SWF file.

  8. open the output file with Flash Player 20.0.0.267 in any platform.  The expected result would be an audio clip is played regularly, even if 'this.stop ();"was executed in front of her to reach the image to play the sound.

  Here's how we reproduced a more serious bug inserting a code unrelated to the statement also:

  9. close Flash Player has opened in step 8;

  10 continue to edit the same file in step 1 in Flash Professional CS 5.5;

  11. Add a new layer in the timeline of the scene;

  12 Add an Action to frame 1 of the new layer with ActionScript "trace ('abc');";

  13. publish the file SWF.

  14 open with the output file with Flash Player 20.0.0.267 in any platform.  The expected result would be a LOT OF audio clip played together causing a loud noise.

  Here are the links for the FLA and SWF we produced in the experiment above.

  https://www.dropbox.com/s/u1rg04ocftn93ma/fp_bug_20.0.0.267_auto_sound.fla?DL=0

  https://www.dropbox.com/s/7s3fdm1ifh3kqhh/fp_bug_20.0.0.267_auto_sound.swf?DL=0

  https://www.dropbox.com/s/fj5kj5z46mx8wth/fp_bug_20.0.0.267_loud_noise.fla?DL=0

  https://www.dropbox.com/s/qh5z7r13s487dkd/fp_bug_20.0.0.267_loud_noise.swf?DL=0

  I guess that any computer with the reader Flash 20.0.0.267 must generate the same result.  We are always ready to just look for a solution.

  We build more recent that we believe addresses the sound question (as well as the difficulties of previous bug provided in our last beta).  We would appreciate your feedback from those that have taken place.  I have included all versions of the installer in the link below.

  Shared files - Acrobat.com

• When refreshing a clip, timeline teeters between old and new versions?

  This has been a problem persistent and annoying for as long as I can remember.  You want to make a change to an animated sequence in your timeline.  Make you it, save it over the old, and it SHOULD just update in your timeline, such as making a change in a dynamic link.  But this isn't... sometimes.  You see the images flicker between old and new, if its a .mov or frame sequence.  Of course, it has something to do with the cache because the old file is GONE.  His crushed.  There is not, except in the temporary cache files.  The question is why don't they crushed?  First reboot always solve the problem, but why should I have to restart to clear the cache?   I can't be alone here.  I've seen this happen on several different set ups with Win and Mac OS, so it has zippo to do with the material.

  Try closing and reopening of the sequence.