Stop randomly using Vista

Similar Questions

• message during shutdown, "windows live messenger preventing stop" I use vista

  I use vista and when I try to stop that I get a sasying message that windows live keeps me to stop. screen fade on evevtually then will stop.

  I use vista and when I try to stop that I get a sasying message that windows live keeps me to stop. screen fade on evevtually then will stop.

  Windows Live Messenger is an independent product supported by the Portal of Messenger to Windows Live Support Center.   FWIW, I would try to find an icon for it in the Notification bar to the taskbar, which do a right-click and choose Exit before you shut down your computer to avoid this symptom.

  ---

• Satellite P200-144 never stop correctly using Vista Ultimate

  Recently made a regeneration of my P200-144. Used with Vists Home recovery disk. Then upgraded to Vista Ultimate. After it was sold went to the web site of toshiba for the latest drivers and decided to update the bios.

  To restart the laptop is it never shutdown properly. Left with no other choice it off (left by logging out of the screen).

  Now computer laptop won't do anything. Is it possible to get the bios to boot / restore or do I need to reach a support centre.

  Hmm, looks a little more that the BIOS update failed?  :|
  Usually, in such situation the ASP help is necessary.

  But before contact you the ASP and will be sent to this device on the balance I would recommend removing the battery and disconnect the laptop power adapter.
  Then wait about 20 min, then reconnect both sides and try to start the laptop.

  If you won't be successful then the help of ASP is required

  Good luck

• Computer daily and random stops with laptop Vista Ultimate

  I use a laptop Toshiba Qosmio with Vista Ultimate.  The machine stops completely randomly on its own and I have to restart - which can take up to four minutes - I get a message in an unexpected way, the machine closed and restarted in XXXX seconds.

  This morning I got Excel (2007) and Word (2007) open and use my webmail (work and personnel).   I use Internet Explorer.  It is quite frustrating and I don't know where to start to try at the source of how correct the problem or address.  The machine is not quite 3 years and Vista Ultimate came installed on the machine.  I installed the Service Packs 1 and 2 on the machine.  I'm also trying to determine if I should Windows 7 would avoid most of these stop random downs.

  I am open to your ideas and I appreciate your help - I'm not a computer wizzard, so dumb down for me.

  Amy

  Hello

  Use the sections "BOLD" here to gather information.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that causes the
  Crash.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Window___The small flashing command syntax is incorrect__ Intel Viiv__ Settings__Any idea how I can get this to stop? I use Vista. Thank you.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Suddenly, I have a small window constantly, opening and closing very quickly.  I managed to be frozen and could read the following: the URL is C:\Windows\system32\cmd.exe
  and the error message is:
  The syntax of the command is incorrect
  Intel® Viiv™
  Parameters
  No idea how I can get this to stop?  I use Vista.  Thank you.

  Okay, I think that I fixed it.  I went in the Sys Config, Start Up and unchecked "common SDK-Sonic Solutions/Roxio."  Also not controlled all the other stuff video I don't need at start-up. I then restarted it, of course.  It has been a few hours now and no window flashing.  Roxio is a nice program, but has been a problem on my computer. By auto-off starting this program, it seems to have solved the problem.

• stop random blue screen error DRIVER_IRQL_NOT_LESS_OR_EQUAL STOP: 0X000000D1

  original title: stop random screen w/blue

  I need help to solve this problem. My system will freeze and then randomly crash if I run games, programs or just sitting idle. I took the fan and blew out the dust, etc... and still no better. The info I get blue screen are:

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  STOP: 0X000000D1

  nvstor.sys - address 83F42395

  Any help would be appreciated to gratly.

  Hello

  Here is a version of Vista of the troubleshooter that Dena referred:

  =================================================================

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  -----------------------------------------------------------------------------------------------------------------

  Check with your manufacturer for newer drivers video card (special forces), known issues and
  other possible problems - check also the video card and game maker forums. It can even be
  a problem created by the interaction of two pilots (rather than the usual cause), perhaps the
  video driver and a swap file error and other causes work together to create the problem.

  ==============================================================

  Even if you have done some of these methods here is the complete troubleshooting tool while
  dealing with his need.

  Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
  methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
  programs may also cause this. Check the resolution of the problems and when you get to the pilot and sections tests memory refer to the generic methods in the next message and then returns to the resolution of problems
  If necessary.

  BCCode: D1 0x000000D1

  Cause

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

  This bug check is usually caused by drivers who used a wrong address.

  If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

  • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
  • The function call was made to a function in another pilot, and that this driver has been unloaded.
  • The function was called by using a function pointer that was an invalid pointer.

  BCCode: d1 0x000000d1<-- read="">
  * 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, drivers particularly video drivers but it
  are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly

  
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My Acer laptop stops randomly

  I have an Acer Aspire 4730Z, Windows Vista, MO 2007. A few weeks ago he began to stopping randomly.  This happens at different stages during the start up or sometimes after that, I was on the laptop for hours.  It is completely random.  Any ideas?

  Thanks in advance for your help.
  Diana

  Hi Diana,

  1 are there any changes or updates made on the computer?

  2. do you get an error message? If Yes, what is the full and exact error message?

  3. do you get a blue error screen?

  Step 1:

  I suggest you to disable the auto restart to avoid unwanted restarts on the failure of the system and note the error message.

  a. when your computer starts up keep press F8 on your keyboard until you get the Advanced Boot Options screen.
  b. now, use the arrow keys, select disable automatic system error reboot and press ENTER.

  Step 2:

  I suggest you to see link and check if it helps.

  Pick up the pieces after a computer crash

  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Look for error messages in the event and after feedback from the observer.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  What are the information in event logs? (Event Viewer)

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• Windows speech recognition stops randomly with the error: «the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80.» The memory could not write. »

  Original title: "the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80. The memory could not write. "And the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80. The memory could not be written.

  I have Windows Vista and I use speech recognition Windows, a lot of things. I have used it for years and have really learned to rely on it! Unfortunately, since a recent upgrade of windows installed, Windows speech recognition stops randomly in the middle of using it and it gives me the following error message: «the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80.» The memory could not write. "And then it stops. When I open it again, it seems to open normally and it will work for varying amounts of time before it does again and I get a different error message.

  I tried to restart and it did not help at all. Please, can someone help me? Please?

  Hi Alicia,.

  1 update you tried to install?

  Method 1:

  You can try to run a SFC scan and check.

  This problem may occur if a system file is missing or damaged.

  You can refer to the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Step 1:

  Check the updates that are installed recently.

  You can view the following link to check the installed updates:

  See the Windows updates are installed

  Step 2:

  You can uninstall these updates and try to install the update one at a time and check for the issue.

  Remove an update

  Method 3:

  You can also try a system restore to a restore point before the updates were installed.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• Failure of intermittent internet connection using Vista on Verizon DSL

  I had problems with Verizon DSL stopping randomly and does not to return to the top for an unacceptable period of time. Oddly, it doesn't happen on the Vista machine at home. None of the Mac has this problem.  If I remove the machine network Vista and replace it with a XP machine is also no problem.  It's on a cable network.

  I think I can find some interesting information. What I did was as much the DNS entries my network connection that I could find. I have used google, OpenDNS, DNSadvantage, Verizon, Norton a few steps from my web services and everything else I could find. There certainly reduce questions but had some interesting effects for example one of the URLS pointing to obsolete the secondary DNS information.

  I'll post the DNS entries here except those owned by my web host.
  8.8.8.8
  8.8.4.4
  151.201.0.68
  208.67.222.222
  208.67.220.220
  156.154.70.1
  151.201.0.39
  141.150.0.68
  141.151.0.68
  141.151.128.68
  141.155.0.68
  71.252.0.12
  71.242.0.12
  192.168.2.1
  156.154.71.1
  198.153.192.1
  198.153.194.1
  4.2.2.1
  4.2.2.2
  4.2.2.3
  4.2.2.4
  4.2.2.5
  4.2.2.6
  67.138.54.100
  207.225.209.66

  To enter these click on "Start"-> "Control Panel"-> "Network and sharing Center", click on "Manage network connections", double click on the active card, click 'Properties', double click 'Protocol Version 4 (TCP/IPv4) Internet', click on 'Advanced... '. ', go to the "DNS" tab, click on "Add..." "and enter the values.

  This is not a complete solution. Sometimes, still, but not as often. Some sites still bring the network to its knees.  Sometimes she lets wait for the connection to be reborn and run a WHOIS on the site that has the problem of one of their DNS to add to your list. I put it to the top after google's servers and it seems to work most of the time.

  I went through all of the so-called "patches" of this problem without success.   What is the solution?  It seriously makes me batty.

  Hi mark11_23,

  Got several things for you to try:

  1. How old is your router, you should consider updating the firmware on your router. Some older routers do not sit will be Vista (or 7) and require an update of the firmware.
  2. Update the driver for your NIC directly from the manufacturer's website. You'd be shocked to see how many sons of connection to network on these forums are caused by a newer driver.
  3. No chance that you are able to get the issue of duplicate mode safe?
     http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  4. If the problem does not occur in Mode safe mode, go to a clean boot and locate the item causing the problem.
     http://support.Microsoft.com/kb/929135
  Let me know the results!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Gmail button (in internet explorer) keeps having moved to the right in my taskbar when I wasn't staying on the left (that's why I first open). How can I get the taskbar buttons to stop randomly to reorganize and stay in order?

  Gmail button (in internet explorer) keeps having moved to the right in my taskbar when I want to keep it on the left (that's why I first open).  How can I get the taskbar buttons to stop randomly to reorganize and stay in order?  I'm talking about the buttons on list of my open applications and documents in Windows Vista.  The bar tasks are "locked", but the button of the window open with gmail in internet explore reappears suddenly in the good moments apparently random.

  It is in the middle part of the taskbar (what I found online so far is on the start menu, the quick launch area or area/system tray of notification, the location of the taskbar in full, either about grouping taskbar - I disabled because I would like to separate).  Can anyone help?  I don't understand why this is happening (or why microsoft would never do).

  Lock the taskbar that it prevents to be moved elsewhere on the office and maintains the different sections where they are - it does not block the tabs showing what is open where they were when they were opened.  There is no control for this function.  Maybe if you uncheck similar taskbar buttons group it will help, but I honestly don't know (and fear he won't make any difference - it may even make things worse).  This also happens to me and I was unable to find an answer.  I think that there are more than just random, but I can't telll you why he moves the legs periodically (sometimes it works fine all day and other days it happens almost immediately).  But still, there is no control for this function, so there is no way to tell him to keep a specific order or to lock an established order, once it has been created.  I suspect that it happens because the notification area icons appear and hide and new programs open and close and which changes the amount of space available and so he rearranges things so that they match and apparently does not always consider the original sequence in which the elements have been added.  Maybe if you remove the Quick Launch toolbar and then add again, the order will reset (but that I know not - probably not in the original sequence, which I doubt is logged nowhere - it did not work when I tried it).

  Unfortunately, I don't have a solution to this problem (and I spend a little time looking for even before myselff posed the question) and do not believe that there is a.  It is also unfortunate that you can't move them so they can be put back in the right order if they change.  I don't think that there is nothing wrong with your system or that it is something that can be repaired or fixed - it's just the way it is and we just have to live with it.  I don't know any 3rd party software that controls the order of tabs open in the taskbar program (but you can check out Bing, Gooogle,www.tucows.comand www.download.com to see if I'm wrong on this - here n "t all when I looked trying to solve this problem for my own system).

  I'm sorry it wasn't what you wanted to hear, but it's like that.  I don't know if it's different in Windows 7.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• stop randomly

  Good day everyone, as the title said, I feel random stops with mu MBP 3.1

  A couple of months, I've had a GPU problem which I fixed by replacing the motherboard with a chip 'improved '.

  It happens any time the battery is it not and it's the same with the charger. Replaced ram with Owc units.

  At this point, that I don't know if this is hardware or software related so here is a report:

  EtreCheck version: 2.9.12 (265)

  Report generated 2016-06-03 05:36:14

  Download EtreCheck from https://etrecheck.com

  Time 04:19

  Performance: good

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Another problem

  Description:

  Stop randomly

  Hardware Information: ⓘ

  MacBook Pro (17-inch, 2.4 GHZ)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro3, 1

  1 2.4 GHz Intel Core 2 Duo CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  2 GB DDR2 SDRAM 667 MHz ok

  BANK 1/DIMM1

  2 GB DDR2 SDRAM 667 MHz ok

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 157

  Video information: ⓘ

  GeForce 8600M GT - VRAM: 128 MB

  Color LCD 1920 x 1200

  Software: ⓘ

  OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour

  Disc information: ⓘ

  ST9160821AS disk0: (160,04 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  MacBook 17 (disk0s2) / [Startup]: 79,51 (Go 13.19 free) (weak!)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Stuff (disk0s4) / Volumes/Stuff: 79,54 GB (47.23 GB free)

  USB information: ⓘ

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple computer Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Built-in ISight from Apple Inc..

  Configuration files: ⓘ

  / etc/hosts - Count: 15

  Guardian: ⓘ

  Any where

  Kernel extensions: ⓘ

  / Applications/Toast Titanium/Spin Doctor.app 11

  [no charge] com.hzsystems.terminus.driver (4 - 2016-06-02) [Support]

  / Applications/Toast Titanium/Toast Titanium.app 11

  com.roxio.TDIXController [no charge] (2.0 - 2016-06-02) [Support]

  / System/Library/Extensions

  com [no charge]. Cycling74.driver.Soundflower (1.6.6 - 10.6 SDK - 2016-05-28) [Support]

  com.roxio.BluRaySupport [no charge] (1.1.6 - 2016-05-28) [Support]

  Launch system officers: ⓘ

  [loaded] 8 tasks Apple

  [loading] 160 tasks Apple

  [operation] 70 tasks Apple

  Launch system demons: ⓘ

  [loaded] 48 tasks Apple

  [loading] 161 tasks Apple

  [operation] 81 tasks Apple

  Launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2015-05-03) [Support]

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2016-05-15) [Support]

  [loading] com.adobe.CS5ServiceManager.plist (2015-05-03) [Support]

  [operation] com.canon.MFManager.plist (2012-05-22) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2015-04-30) [Support]

  [operation] net.culater.SIMBL.Agent.plist (2016-01-13) [Support]

  Launch demons: ⓘ

  com.adobe.ARM [running]. [...]. plist (2016-02-09) [Support]

  [loading] com.adobe.ARMDC.Communicator.plist (2016-05-15) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-05-15) [Support]

  [loading] com.adobe.SwitchBoard.plist (2015-05-03) [Support]

  [loading] com.adobe.fpsaud.plist (2016-05-09) [Support]

  [loading] com.macpaw.CleanMyMac3.Agent.plist (2016-06-02) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2015-04-30) [Support]

  [loading] jp.co.canon.MasterInstaller.plist (2015-07-21) [Support]

  User launch officers: ⓘ

  [loading] com.bittorrent.BitTorrent.plist (2016-04-11) [Support]

  [loading] com.google.keystone.agent.plist (2016-03-02) [Support]

  [loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-06-02) [Support]

  [loading] com.valvesoftware.steamclean.plist (2015-09-08) [Support]

  Items in user login: ⓘ

  Fan of Macs control application (/ Applications/Mac Fan Control.app)

  Application of control of Fan of Macs (~/Downloads/Macs Fan Control.app)

  CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 3.app/Contents/MacOS/CleanMyMac 3 Menu.app)

  Other applications: ⓘ

  [ongoing] com.crystalidea.MacsFanControl.115232

  [ongoing] com.macpaw.CleanMyMac3.Menu.309792

  [loading] 414 tasks Apple

  [operation] 172 tasks Apple

  Plug-ins Internet: ⓘ

  FlashPlayer - 10.6: 21.0.0.242 - SDK 10.6 (2016-05-12) [Support]

  QuickTime Plugin: 7.7.3 (2016-05-17)

  AdobePDFViewerNPAPI: 15.016.20045 - SDK 10.11 (2016-06-02) [Support]

  AdobePDFViewer: 15.016.20045 - SDK 10.11 (2016-06-02) [Support]

  Flash Player: 21.0.0.242 - SDK 10.6 (2016-05-12) [Support]

  Default browser: 601 - SDK 10.11 (2016-05-17)

  NP_2020Player_IKEA: 5.0.94.1 - SDK 10.6 (2012-09-28) [Support]

  SharePointBrowserPlugin: 14.6.4 - SDK 10.6 (2016-05-29) [Support]

  Silverlight: 5.1.41212.0 - SDK 10.6 (2016-02-20) [Support]

  JavaAppletPlugin: Java 8 73 build 02 update (2016-03-05) check the version of

  Safari extensions: ⓘ

  Adblock more - Eyeo GmbH - https://adblockplus.org/ (2016-03-27)

  3rd party preference panes: ⓘ

  Flash Player (2016-05-09) [Support]

  Growl (2015-05-03) [Support]

  Java (2016-03-05) [Support]

  Tuxera NTFS (2015-04-30) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: NON - automatic backup disabled

  Volumes to back up:

  MacBook 17: Disc size: 79,51 GB disc used: 66,31 GB

  Destinations:

  Stuff [Local]

  Total size: 0 B

  Total number of backups: 3

  An older backup: 2016-01-17, 09:29

  Last backup: 2016-01-17, 17:40

  Backup disk size: too small

  Save the size 0 B < (disc 66,31 GB X 3)

  Top of page process CPU: ⓘ

  13% spindump

  Console 12%

  7% kernel_task

  5% WindowServer

  1% configd

  Top of page process of memory: ⓘ

  594 MB kernel_task

  532 MB com.apple.WebKit.WebContent

  Safari of 258 MB

  Mdworker (9) 147 MB

  Console 115 MB

  Virtual memory information: ⓘ

  187 MB free RAM

  3.82 GB used RAM (1.14 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  3 June 2016, 05:09:36 self-test - spent

  Thanks to anyone who can help me with this!

  Remove CleanMyMac 3.  It can damage your Mac.

  http://macpaw.com/support/CleanMyMac/Knowledgebase/how-to-uninstall-CleanMyMac-3

  Rid the Mac of the torrent application.  Torrents are a good way to introduce malicious software.

  Exactly what that mean by "improved chip" when you replaced the logic board?

  Ciao.

• Stop randomly Qosmio X 770 - 138

  Hi guys, just bought my new Qosmio X 770-138 a week ago and everything seemed fine until he began to stop randomly. It is not proper closures, just boom--off.

  Now, I can tell you that it it does NOT heat related, it happens that when I'm idling the CPU temperature is around 40-45 degrees Celsius, so I ruled that out of the "education".

  It never happened when I run games high performance that makes the temperature spikes CPU to max 60 degrees celsius.

  Now, I tried to use Reeltime "turn back time" to a precedent that date, it has not stopped, that it worked fine for a day, then he began to close again.

  Now I've just updated the BIOS and the nVIDIA and INTEL video drivers and it has not closed for about an hour, but I don't think I'm in the clear yet.

  No one knows what causes these kinds of closures? I have F-SECURE protection from virus/spyware and firewall which is true, so I should be relatively well protected against the bad guys.

  Thanks in advance for any help! :)

  > Now I've just updated the BIOS and the nVIDIA and INTEL video drivers and it has not closed for about an hour, but I don't think I'm in the clear yet.

  And now? The laptop works stable? Has he stopped after you apply updates?
  It is possible that some driver compatibility problem caused these cases
  However, use Notepad for a longer period of time and the report that the results would be interesting to know how it works.

• Laptop stops randomly and gets stuck on the saving settings

  Basically, we have some laptops 10 + this will stop randomly and get stuck on the "saving settings screens.

  Here are the different models of toshiba R500-R600 M10 M9 M5

  We changed versions of bios etc, reimagee them, even used an image of windows xp disc rather than soe.

  Hardware tests OK and customers do not something in particular, some when others when you connect using applications office, back in after a while. Some use docking stations, others not.

  All ideas

  Hello

  Just a question: are you an authorized service provider?
  I ask this question because it looks like you are an ASP because you have so many laptops and you have tested different things.

  It's really hard to say what the reason is for this but I think that in this case, you should contact Toshiba directly. Maybe it s a known issue and it can be fixed in a few minutes.
  So ask for it and wait for a response.

• Satellite A200 (PSAE3E) - stops randomly

  Hi all!

  I got an A200 PSAE3E in my possession which stops randomly. He really died the hard way. I have excluded a software problem, because even this wenn waiting for PXE, so no start-up of the drive HARD or another device...

  The only idea I have left is to Flash the BIOS to get it to work again properly as I thought it might have something to do with faulty breaks? Or anything that leaves the BIOS to be originally...
  When he is not the BIOS, then the motherboard itself must be faulty which leaves me only one option: throw this piece :-D

  * Up to now, the real question: how Flash BIOS without using an operating system like Windows? Is it a kind of combination of button I can press start so he can a BIOS file from a USB flash? *

  Help would be very appreciated.

  Hi medis,.

  Without an operating system it s not possible to update the BIOS. All updates of BIOS provided on the official website of Toshiba are windows, depending on whether you need an operating system running up-to-date BIOS.

  To be honest I have don t think that the BIOS is the reason for this

  The laptop is overheating or hardware malfunction s motherboard or the CPU

  If it s just an overheating issue you can solve the problem yourself by cleaning radiator with a jet of compressed air to blow the dust from the cooling fans.
  If it doesn t help you need professional help of an authorized service provider. Guys have professional tools to make an accurate diagnosis of your laptop, so they can tell you what to do in this case.

• Stop random Satellite P105-S6004

  I've had my laptop for over a year now and its been send me questions since I got it. I had the hard drive replaced by toshiba, while it was under warranty too. But from this stop randomly, it's 'new' its not covered.

  In any case, I ran dianostics etc and nothing seems to be wrong, but the laptop stops randomly without any warning. Now, he USED to blue screen, but perhaps his tired to do this more?

  I have a laptop cooling pad, and I cleaned inside the computer, etc. Nothing seems to be a problem with the RAM or the fan. So I'm not sure what I need to do, then take it somewhere. Any help would be appreciated!

  -Lindsay

  Hello

  are you sure there is no third party pre-installed software on your laptop that can be responsible for the blue screen or stop the down?

  It is not easy to say why this happen because the blue screen can be the result of software and hardware problems.