stop working on MBP mid2012 Kingston ssd

Similar Questions

• MBP 13' Retina Display 2015 start stop working

  I use mbp 13' 2015 and idk why it frequently stops working when using. That is to say the screen freeze, trackpad is not working. Only, I can do is to press the power button and stop him to solve. I'm seriously embarrassing for this problem cause I bought last January. Please help me find the solution for this problem. Thank you all.

  Download and view a report of Etrecheck:

  http://etrecheck.com/

  Ciao.

• Two dead in Kingston SSD on Satellite L850-1PD

  I replaced my mechanical hard drive with a Kingston SSD and after two months the drive just stopped working. I found my money and bought another Kingston SSD on another provider. After a few months the new drive has stopped working again. I'm on the process to replace it with a new, however, at this point, I think that there is something wrong with the laptop causing drives to fail.

  If more details are needed, I can give them.
  Thank you.

  I put t think the problem might be related to the laptop.
  Why mobile should break up the SSDS and how?
  I mean the SSD drive is connected to the SATA controller and that s it!

  What you need to do is to check and change some system settings
  You could disable scheduled disk defragmentation
  Disk Defrag is useful for spinning commune HDD which have moving parts, but not for the SSD drive!

  You must also disable indexing. Indexing is a Windows service that aims to speed up the search Windows. Indexing service automatically keeps track of the files that makes faster searching of files.
  But the fact is that indexing Windows makes several small write operations and this could decrease the life SSD.

  Last but not least make sure TRIM support is enabled and you could disable, move, or shrink the file of the page

• Audio has recently stopped working on macbook pro 2014, Win7 x 64

  Material: Retina Macbook Pro mid 2014-15 "2.8 GHz 16 GB of RAM

  Software: Mac OS + installed bootcamp Windows 7 business N SP1 64-bit with latest updates attached to the field

  Audio worked absolutely the facility for a year or two. Just recently the speakers and headphone stopped working and SPDIF red light of the headset jack is now constantly lit (did not use to be informed in all). Maybe happened as a side effect of windows update, update of apple or software update or demand of the NVIDIA driver installation.

  What audio drivers should I have installed Bootcamp software support for MBP mid 2014? Real audio hardware is present on this MBP - Apple card is vague on this point?

  When scanning for hardware changes in Device Manager the same driver is always automatically reinstalled. There is no option to delete this. The driver update has no effect. The device is shown as working properly. There is no errors and there are devices of reading for the speakers, headphones and SPDIF, but no audio exited actually.

  • High definition audio
  • Manufacturer Microsoft
  • Location 0 (internal high definition Audio Bus)
  • version 6.1.7601.17514
  • day 11-19-2010

  There was also a Microsoft device system speaker (don't download reinstalled during the analysis of new equipment) and nvidia audio drivers (for audio output HDMI).

  An additional symptom - connect headset does not show the helmet as playback device as a playback device connected as I expect.

  Is it possible the Bootcamp software support has failed to reinstall the audio drivers correctly? Can I get a feedback or a software Bootcamp Support log to see what's happening?

  A Windows somehow got locked in a SPDIF output? This cannot be a purely material error as MacOS still work very well?

  Other measures to diagnose this problem?

  A few steps I've tried without success:

  • Check all volume and mix parameters
  • Roll back these recent software installations
  • Watching installed the drivers in Device Manager - all audio devices are shown as working properly analyze, because material changes do not find any additional sound hardware to configure. Update driver drivers online research is not to find an updated driver.
  • Using an another USB audio device - this device works great
  • Reboot under Macos - built in speakers very well work
  • Restart in SafeMode the Windows - audio device does not appear to be installed (maybe the driver no is not supported in safe mode).
  • Reset the NVRAM (restart with option commmand PR)
  • Reset the controller of the SCM
  • Run the restore of the system - restore points fail to restore with the exception of a few of the latter that does not solve the problem
  • Uninstalling all audio drivers and re-run bootcamp support software setup.exe (the older version of download 5.1.5640 which seems to be the only one who supports my hardware/windows 7 x 64 combo)
  • Back the NVIDIA driver to the version provided with the support of bootcamp software
  • Intel chipset installers running provided with the support of bootcamp software
  • Assistant Configuration boot camp running on Mac OS to get the latest drivers - fails because does not support my combination of material and win7 x 64 as documented on Apple support pages
  • Not running Apple Software update - no update is available for all drivers.
  • Don't run Windows update - no update is available for all drivers

  If the red light goes out in OS x but not in Windows, it seems to be the State of the combined analogue/digital port stored in the Windows registry. On W7 on a 2013 rMBP (he has the card nVidia 750 m), this is what you should see your Audio devices.

  

• Why my USB keyboard did stop working?

  Can some tell me why my USB keyboard stopped working after I upgraded my mac OS X EL Capitan 10.11.4?

  Seems that Apple had broken the old apple keyboard wired usb on OS X 10.11.4. New Apple wireless keyboard worked fine.

  Was not working at boot time and didn't work with windows bootcamp and did not work when started from the recovery partition, so it must be a problem with boot loader.

  Reseting EPRAM and SMC has failed.

  Time Machine restore to old 10.11.3, 10.11 install USB appears to only way to solve the problem.

  With old 10.11 usb install, because the keyboard did not work at boot time and restoring from Time Machine backup starting 10.11.4 recovery partition broke my fusion disk partition tables. I had to manually destroy disc fusion and remove partitions on the hard drive and ssd of command-line diskutil and create new logical volume of fusion in the car and after that he restore backup from Time Machine.

  Very well of the keyboard now work but lost 1 day and Windows 10/bootcamp partition in the process.

  I have iMac 27 "5 k end of 2015, but I like to use wired keyboard numpad because.

• TosSmartSrv.exe stops working when you start up Vista

  TosSmartSrv.exe stops working whenever I start my computer (Vista)

  What is this file, and what I can do to resolve the situation?

  I have a new Satellite Toshiba Quad Core and have not seen this message on my old Toshiba Satellite.

  Hello

  Toshiba Satellite Quad Core says nothing about your model of laptop so what model you have exactly?

  I tried on my laptop for this file, and it seems that it is for the utility alert SSD HARD drive. It s stored in this directory:
  C:\Program Toshiba Toshiba HDD SSD Alert

  In your case, I would try to reinstall the utility. I also checked the Toshiba page and there you can download. Just search your laptop model on the driver download page and you will find! ;)

  Welcome them

• P50 win 10 Pro - footprints digital has stopped working

  Hi all

  I just got my P50 (20EQS00600, M1000M, i7-6700HQ, 16 GB of RAM, 512 GB SSD) about a week ago and I quite like it. However, there is one thing that drives me crazy: after that I upgraded to Win 7 Pro 64 bit for win 10 Pro, the fingerprint feature has stopped working. This issue seems to be related to those reported in these two threads for the P70, but at the same time appears sufficiently different to warrant a new post:

  https://forums.Lenovo.com/T5/ThinkPad-P-and-W-series-mobile/P70-fingerprint-software-issue/m-p/22517...

  https://forums.Lenovo.com/T5/ThinkPad-P-and-W-series-mobile/fingerprint-and-sound-problems-P70/TD-p/...

  So, here is what I did:

  (1) I correctly installed Win 10 w/o retaining data/settings from the previous installation of Windows 7; I even reformatted the SSD drive.

  (2) for the initial installation, was asked by Windows Hello register prints I've done.

  (3) fingerprint worked during the first connection, but then disappeared as if by magic. Hello Windows is no longer appears as a connection option in the control panel of Win.

  (4) I found in Device Manager the Synaptics WBDI reported the following problem: "this device cannot start. (Code 10) ".

  (5) repeated uninstall and reinstall drivers are without success. I tried both have Win a driver and manual to install the drivers I downloaded from Lenovo page.

  (6) when I uninstalled the drivers and then wiped the fingerprints stored in the BIOS, I was again able to register fingerprints with Windows Hello. However, this time the fingerprints were not yet registered in Windows, and I had to cancel the procedure. Immediately after, the Synaptics driver stopped working, cf. 4).

  I am at a loss what to do. Strange thing is that I ran Win 7 for about a week, and the fingerprint reader worked fine all the time. (Due to the scaling of the questions on my 4 k screen, I bit the bullet and went to win 10, in case you're wondering.)

  So everyone out there has the same problem, does anyone have a solution?

  Thank you in advance and the best,

  A

  
  

• Mail has stopped working

  Why the mail app on my MBP did stop working? I try to send messages, but nothing happens. Blue 'send message' status bar goes up to about halfway, then stalls.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Adapter Ethernet Thunderbolt has stopped working after update 10.11.2.

  Hello, after my update to 10.11.2 on my MacBook Pro retina 15 "mid-2015, my crush Ethernet Adapter has stopped working. It comes in the reporting system and it shows that it connected to ethernet, but in the network Panel, the State remains red and I don't get an IP address.

  My colleague who has a MacBook 2013 15 "retina Pro also has the same problem. We tried the retail adapters Ethernet Thunderbolt, but still no connection on one of our networks.

  Anyone else see this behavior?

  Same problem here on my end 2013. In Recovery Mode, the card works (good trick to know if hardware is broken). Roll back via Time Machine works 10.11.1 and adapter. Adapter and 10.11.2 relocation does not-MBP-R all my colleagues in different years work well after the update.

  BTW. : not only Thunderbolt Ethernet does not work, but the cards virtual Parallels (for shared and host-only) as well (only bridged mode works).

  So far, all the stuff has failed. And now I will notify again before the update.

• Ethernet and power to stop work on the Thunderbolt display

  I have my MBP connected to a thunderbolt, power of the connection screen and using the ethernet on love at first sight port to connect to my router.

  These two functions has stopped working. The USB ports still work and the works of the display, but stopped power and ethernet. Is there a way to re - configure or troubleshoot this?

  You can unplug the TBD from the wall, wait 3 minutes and reconnect.  Who can help.

• Predator G3120 stops working after one hour (exactly)

  Acer Predator G3120

  Windows 7 (64-bit)

  State of origin

  Stops working after one hour (very reproducible)

  Hello peoples,

  For more than two years now, I have an Acer Predator G3120 and I experienced a lot of pleasure from it. Three months or so, however, I can't keep the pc for more than an hour later. If I have all the programs running at the time where he spent an hour limit, my pc crashes and gives me a BSOD (mainly stopcode 0x000000f4). If I don't have any programs running, it will be impossible to open all my desktop shortcuts, and if I try to go to 'My Computer', explorer.exe stops working. ALT + ctrl + del will result in a black screen. I'm quite a greenie when it comes to things like these, but I am I supposed to do something with my SSD.

  Download the latest drivers did not work, however. Also, I'm sure that this doesn't have to do with malware, as I couldn't detect any with different scanners, and I put my pc back to factory settings (which makes it quite certain, that he doesn't have to do with any installed programs).

  At this point, I'm running out of options, and so any help would be most welcome.

  Thank you for reading,

  Skumawiki

  Once connected to your system, your position SSD is not serious.

  Try this:

  http://www.crucial.com/wcsstore/CrucialSAS/firmware/M4/070H/1-0-0-90-crucial-070h-07-00-SSD-firmware...

• host of the print driver for applications stopped working 5100cn

  I don't know if my previous attempt at this post went through...

  I've recently upgraded to an SSD and a new installation of won 8.1 (exactly the same thing I had on my old HDD) and now when I try to print from my Dell 5100cn I get the following error:

  Host of the print driver for applications has stopped working

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: splwow64.exe

  Application version: 6.3.9600.17480

  Application timestamp: 545871c 1

  Fault Module name: dlpsc51r.dll

  Fault Module Version: 0.3.1281.4200

  Fault Module Timestamp: 4324d 269

  Exception code: c0000005

  Exception offset: 000000000000cd 87

  OS version: 6.3.9600.2.0.0.768.101

  Locale ID: 1033

  Information additional 1: 1 has 72

  More information 2: 1a7236b9868d6b38d3fd37b43ff05b06

  Information additional 3: 269 b

  Additional information 4: 269b7fc9d660b4191041ae78f0745b83

  For the life of me I can't figure out what I'm doing wrong... The printer still works fine if I swap back to my old HDD so I know its something I do (or not do)... I tried to figure this out all day and have installed several drivers in normal mode and compatibility without result.

  When I open devices and printers on the old drive HARD the printer name reads "Dell Laser Printer 5100cn PCL6" but when I check the devices and printers on my new SSD it reads "Dell Printer 5100cn PS"... So, I know that I do not want to install the same as I have done before and I can't understand what I installed... I use a Toshiba Satillite P75 A7200 if that matters...

  Help, please

  Hi Roydub83,

  Thanks for writing on the Dell Community Forum.

  Please uninstall all the printer driver on the system installed for Dell Laser 5100cn printer and then install the driver on Windows 8 using this link http://dell.to/1ETptNA. Install in compatibility mode if the installation does not engage.

  Answer please if you have any other questions.

  Have a nice day ahead.

• Sony Self Extracting package has stopped working?

  So, I got an Acer Aspire 5253, and I try to install Sony Vegas Pro 9.0 trial, since it is the cleaner version, produced. I tried Pro 10 and 11, and they run painfully slow. Anyway, every time I try to install it (9 Pro), I get the same error

  "Sony self-extracting package has stopped working".
  I tried to download the trial of countless sites, including the Archives of download of Sony, but nothing works! I have the feeling that it is a driver problem but I tried to modernize, start in safe mode, etc.; But still the same error.
  That's what happens with:
  Signature of the problem:

  Problem event name: APPCRASH

  Application name: vegaspro90_32bit.exe

  Application version: 1.0.0.1

  Application timestamp: 49d55ff5

  Fault Module name: vegaspro90_32bit.exe

  Fault Module Version: 1.0.0.1

  Timestamp of Module error: 49d55ff5

  Exception code: c0000094

  Exception Offset: 0008018d

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  Additional information 1: 0a9e

  More information 2: 0a9e372d3b4ad19135b953a78882e789

  Additional information 3: 0a9e

  Additional information 4: 0a9e372d3b4ad19135b953a78882e789
  The 64-bit version does the same thing, so I don't think that is the question. Another thing is weird, I tried downloading versions Pro 7 and 8, and they say the same thing...
  Help, please! I tried the Sony site, responses from Yahoo and other sites, but I don't think it's a problem with the software, but windows.

  The machine material is perhaps too fast for the software runs correctly?  Do you use SSDS as primary drive?  If so, can you install the program on a slower hard drive?

  This is the type of error, I think, this is only a guide to prove the error and not a solution as such.

  Division by zero
  http://www.Tek-Tips.com/viewthread.cfm?QID=1254517

• GTA IV has stopped working (please help)

  Hi all. Please can someone help me? I have good PC

  TECHNICAL DATA: AMD ii x 6 3.3 ghz (6core)
  ASUS M4A89GTD pro motherboard
  MSI gtx 560ti 2 GB OC graphics
  Kingston 8 GB RAM
  And I don't know why... so on my old Win XP Prof running GTA IV smoothly... so now, when I Win7Ultimate 64 bit I have a problem
  Works almost well... I start the game and I can go to the MENU when I press start button (load game) after a few screens when I should be "reappear" in the game is black screen and I got this message: PROGRAM has STOPPED WORKING
  Please can someone help me?
  Thank you
  Sorry for my ENGLISH

  "So when I got the original game it too don't work... and because it doesn't I sold it to my friend :) '.

  And it works for him because he has Win XP"

  And magically a pirate version works on Win7?

  It is not just a matter of it being a Pirate version, but not knowing the
  features a Pirate version, I can not make relevant suggestions.

  It is somewhat similar to the games from steam. Steam versions of the game have their own idiosyncrasies, so the best forum for versions of Steam games is the Steam forum.

  Everything also - I wouldn't touch a version of torrent of a game as the place probably
  to get a virus/malware comes from a torrent site. I don't do torrents sites and as
  I've never had a virus/malware, I don't intend to start anytime soon.

• T60 and Kingston SSD does not

  Hi guys, I have small projects to the wok. We modernize our T60 with Kingston SSD hard drives and I have to find a way to clone and make them work together. Just so you know the T60 HDs are encrypted if goanna make a difference.

  So far, I have tried two or three programs (Clonzilla and cloning the cloning of Kingston software that came with the SSD) and two ways to clone. I followed all the steps of the http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/Intel-X25-M-Solid-State-Drive-SSD-won-t-... and always without success. When I plugged the SSD drive in towards the top of the tower and start it I get a message "Hit any key to continue...". "and from there, I can't do anything. This message appears on the screen where you can see in the upper left corner "[F2] to cancel automatic logon.

  Does anyone have an idea what I have to do to make this work?

  Thanks advanced

  Tod

  SSD more T60 = total waste of effort.
  T60 is capped to sata 150 means that he be in the ide 100 ballpark.
  Run crypt on a t60 lol joke on your right.
  It will not address the cpu or that ssd and you'll have an ssd of grade enterprize for crypt.

  It takes a very powerful processor to do and the right disc or the software.
  T60 aren't good for a standard ssd upgrade yet.
  Kingstons are undesirable.
  dog slow.
  what your thinking on the subject is an enterprize with sandy bridge sandforce ssd and win 7 ult with bitlocker.
  anything else and he mudra to a halt.