Stor.E USB HDD PX1399E - 2 20 - light continues to flash red / blue

Similar Questions

• To cancel light continues to Flash for the last 2 days on my HP 6500 all on the printer.

  Light to cancel on my HP Office jet 6500 all-in-One Printer E709 help a series continues to Flash for the past 2 days, I changed the thinking of the ink that was the problem, but he did not. I unplugged all caps for about two minutes, then the replugged and nothing helped.  I was doing a copy 2 days ago and the paper stuck, I was able to recover all of the sheet, but since then I'm unable to use the printer.  I can't make copies; I can not print nor can I fax this printer.  What can I do?

  Bob_Headrick thanks for the info but I got intouch with the HP company directly, it seems to be a hardware problem.  They no longer support this printer, but gave a good discounted price for a newer version, I'm happy with.

• on my hp photosmart 7510 than blue light continues to Flash just to the left of the power button. Why?

  The subject line is my question, I have my 7510 connected to the PC via the USB port.

  Light is the indication wireless.  Since you're using USB wireless is likely is not connected to your router, where the flashing.  You may be able to disable the wireless by pressing the icon wireless on the Panel before (upper left) and navigate through the menu settings wireless.

• BlackBerry Smartphones phone lights, flashing red every 3 seconds. (Blackberry 9900)

  Hello everyone.
  I baught my blackberry Bold 9900 this year (March 2012) ive been use since then, but recently it has begun to develop problems such as freezing and everything. Last night, the battery was 30% (enough for the last two hours) the phone just frozen and won't turn on. It continues to flash red 3 times every 3 seconds. Help? 

  Mr_othman wrote:

  Hello everyone.
  I baught my blackberry Bold 9900 this year (March 2012) ive been use since then, but recently it has begun to develop problems such as freezing and everything. Last night, the battery was 30% (enough for the last two hours) the phone just frozen and won't turn on. It continues to flash red 3 times every 3 seconds. Help? 

  Hello

  Before reloading your OS, please try this sequence... Note that during throughout the entire process 4h15m, your BB must stay connected to a good charger (not the USB PC):

  1. With battery, connect your BB to the wall charger
  2. Leave it alone for 2 hours, no matter what the LED or the screen not
  3. Remove the battery
  4. Wait 15 minutes
  5. Insert the battery
  6. Wait another 2 hours, no matter what the LED or the screen not

  This has been known to "revive" some BBs.

  It is also possible that your battery or BB has encountered a problem... to test, this sequence is necessary:

  1. Get a known good and already fully charge battery... use it in your BB and see what happens
  2. Get access to a BB good and the same known... use your battery in there and see what happens

  The results of this will show if your BB or your battery that has the problem.

  Good luck and let us know!

• USB HDD TRAY 1, 5 t: = red light drive lights works very slowly

  Hello

  It is brand new USB STORE 1, 5 t 3.5 "disk.

  Drive normally begins with the red light, initialize and move to blue light. Initially drive works slow - flashing blue when something happens.

  ... but after a few minutes of use, red light may turn on a moment (for e.g. when new folder is created or some files are copied - then drive works very slowly - it appears when you copy).

  After a few seconds, record going to the blue back light - and everything is OK until the switch next to the red.

  1 is this normal behavior?
  2. What is the meaning of red light when the drive is working?

  Thank you in advance.

  Hello

  I m no owner of this HARD but I have a theory.
  According to your information, I think that the red light only appears if data would be written to the HARD disk.
  The blue light appears during the reading of data from the HARD drive.

  Welcome them

• USB HDD as a data store and storage of VMS and new virtual machines

  I have a server Esxi 4.1 with 1 TB RAID 5 storage and 3 virtual machines. The storage is full and no space for another HARD disk, so my question is: would it be possible to use a USB HDD as a data store and could be included as a storage for new virtual machines or the VM? If so, could someone let me know how to do it because I'm not able to detect the HARD disk on the host itself.

  No, it is not possible to use a USB drive as a data store.

  Linjo

• Slow when system 1 TB Store.E USB drive connected

  Hello

  I bought a Store.E USB 1 TB drive.
  After installing the drive system reacts very slowly when the disc is access after not being not to use for a while.
  Is there a sleep mode and if so, she deactivated?

  Concerning
  Heinz

  Hello

  > After you have installed the drive system reacts very slowly when the disc is access after not being not to use for a while.
  I think that this happens because external 1 TB HDD must be scanned and indexed by system once the HARD drive has not been used for a while

  You can try to check the power of Windows 7 options.
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  I recommend you disable the option for USB ports to save energy.
  Maybe it helps

• External USB HDD PX1269E - 1 50 cannot be recognized on computer

  Hello

  I recently bought an external hard drive, Toshiba 500 GB external USB Hard Drive PX1269E - 1 50 I want to use it on my Pentium 4 3.6 ghz memory 1 GB 400 GB internal hard drive and motherboard ASUS P4P800.
  I installed Windows XP Profesional SP2 on this PC.

  We have 4 pc at home and he answered on any of this.
  The next problem is that after I pluged in the USB 2.0 conector, nothing happens? In the close computer store, I asked the seller to try it on one of their computers and the seller pluged it in one of the laptops and my external hard drive has responded immediately!

  After the test to the computer store, we have purchased a pci usb 2.0 card because we thought it was the problem of usb, but after installation of the usb hard drive adapter has failed, either.

  What could be the problem?

  Hello

  The dealer has tested the HARD drive and it worked.
  It seems the exterior works of HARD drive and can be recognized on the computer.

  In my opinion it s is not a HARD drive problem. For the most part this external HARD drive needs more power that can provide a USB port. My brother uses external USB HDD and it was delivered with a cable from USB 2. His HARD drive must be connected to the 2 USB ports on the laptop.

  I think that if you have a single USB plug cable, so you should use an external power supply for the HARD drive or try to connect it to the USB hub with external power supply.

  Maybe it will work

• How to upgrade the already encrypted files on the USB HDD with new XP Recovery certificate

  I backed up the files encrypted in My Documents on a USB drive on which these files are also encrypted state. My computer crashed so I reinstalled the operating system. I wanted to send records encrypted USB HD to my computer or tried to copy projecteurDu and paste them into My Documents. I could not do this because I got "an error occurred in the application...". access privilegesDo i., access is denied. "I created a new recovery certificate and put in place a recovery agent. From there how I update the previously encrypted files on th USB HDD with the new recovery certificate? I'd appreciate a step by step procedure. Can I select the USB drive in the command line and run cipher/u on this drive or make the command/u of encryption on the computer without connecting to the USB HDD

  Sorry to say that my bet is that you never gain access to these files again.

  When you created the files encrypted, Windows creates a key for decryption to access these files and stored, encrypted in your certificate store.  When your system crashed, the decryption key has crashed with it.  Without this key, you will never have access to your encrypted files.  If you have recovered from a backup image-style, you should be able to access these files.  If you've recovered by installing Windows from the installation disc, then you have created a new and different installation with different Secure ID (SID) and a certificate store empty.  A recovery agent will only retrieve encrypted files that were created after that recovery agent was in place - as a new certificate.  What you really need to do, it's your old certificate to restore the backup that you created when you started using EFS.  The following article is mandatory for anyone using the EFS file system.  Special attention to the paragraph entitled "why you should back up your certificates.

  "Best Practices for encrypting file system"
   <>http://support.Microsoft.com/kb/223316 >

  If you do not have a return to the top of your certificate, then things look dark.  There is a program called "AEFSDR' whose 'professional' version comes through what has not been overwritten on your hard drive in search of remains of certificates that could be delivered together to recover.

  Good luck
  HTH,
  JW

• Message: External USB HDD needs to be formatted.

  Hello

  When I insert wire USB hard drive it says that the device must be formatted
  Then I clicked on the format, it gives me a message that the drive is not connected properly.

  Recently I inserted as an icon appears in the windows taskbar.
  When I clicked on it gives me a message to one of the usb ports below is not working properly.

  Messages while windowsc7 os, but it will not be because it is exactly as it is in the English edition, because mine is Arab.

  Hello

  > When I clicked on it gives me a message to one of the usb ports below is not working properly

  To me, it seems that you have a problem with the USB port and the computer does not recognize the USB HDD correctly.
  The USB HDD works correctly on another computer?

• Satellite R10-101: 300 GB USB HDD does "jump up" automatically

  Hello

  I have a Satellite R10 - 101 Tablet PC.

  I wanted to back up my hard drive by copying an image of my entire hard drive on an external USB hard drive.

  I got a 300 GB hard drive on a Windows XP SP2 desktop machine, mounted the drive in a USB2 enclosure and the player properly connected to my laptop.

  However, whenever I connect drive USB2 HARD it does not 'jump' automatically and whenever I want to access it I have to go to disk management and to reactivate (it always seems offline).

  I have no problem with my Ipod 60 GB (with video), or with usb flash drives.

  I unchecked the box in System/Device Manager / USB Root Hub that says allow windows to turning the unit off. I also tried to reassign the drive letter of the USB2 HARD drive but still no luck.

  In addition, when you boot the pc with Acronic True Image to backup my HARD drive embedded it does not recognize the USB HDD...

  I have the latest BIOS and all windows updates, my laptop supports these external hard drives type of?

  I can try to make it work automatically (e.g. be visible like a F:\ for example when it is plugged into the usb port)?

  To make it more interesting, I have the problem on both Satellite R10-101 models which I admit, but my other laptop computer dell Latitude 4 years ago recognize the USB2 HARD drive automatically, please help!

  Raphael Malikian

  OK, thanks for the Nice info.
  It s useful for other users.

• External USB HDD 320GB 10 error code

  Hi im having trouble with my 320 GB external hard drive I bought about 2 months ago and has worked very well to the top and up to now, where it seems to want a driver who I was not provided with the hard drive because it is plug-and-play and does not connect to my computer just returns the error code 10 on all my computers can someone help me find this driver or help me with this problem out as I noticed many people seem to happen with the 250 GB and 320 GB hard drives at the moment?

  Hello

  You suggested that this drive worked properly.
  One question; have you used the option to remove USB device?

  Sometimes the USB could not recognize the USB device because the device was removed without using this option.

  Maybe this will help: go to Device Manager and remove the USB ports. After restart of the operating system to reinstall the USB ports. Then check if the USB HDD works.

• Satellite Pro M30 and start USB HDD

  Hello everyone.

  Is it possible for a Satellite Pro M30 (Bios version 1.70) to boot via USB HDD?

  Thank you
  Vittorio

  Hello

  No, the upgrade of the BIOS will change any possibility of starting.

• Satellite M30-604 external usb hdd boot failure

  Hello world

  Hard drive problems seem never to end for me.

  I have a satellite M30-604. Recently my Hitachi HDD crashed. Now, I am trying to boot from an external hard drive via usb, but I can't.

  (a) I use a ViPower 3.5 "(model VP9258T) enclosure external usb 2.0"
  (b) with a Seagate 200 GB hard drive.
  (c) I used the recovery cd to install windows on the seagate
  (d) the bios (v1.4) seems to support the external device to start
  (e) the internal hdd crashed is deleted (it's internal hard drive space is empty)
  (f) the bios sees the drive and recognizes it as a USB

  I think it should work, but when I turn on the computer, after a while, he says: "0201: failure IDE #0"
  and gives me the options to run the program installation or start-up.
  When I choose boot it gives me the window with "boot in safe mode" screen, 'last known good configuration' etc, but nothing of the work options (it restarts and gives the same again).

  Any ideas please?

  [Edited by: admin on 26 May 05 16:30]

  Hello

  My research on this subject has led me to believe that it is not possible to boot an operating system of attached USB HDD XP. I read several posts on various usenet groups on this issue, and the consensus of opinion is that it is simply not possible.

  Several suppliers of BIOS claim allow a USB HDD to be suitable for start-up purposes but I still have to attend such a machination succeed with XP.

• Laptop sees no external Toshiba USB HDD 500 GB

  Hello

  my new Toshiba drive hard external 500 GB USB does not appear in the laptop with USB 2.0

  The light of the HD post OK

  Tried all USB ports three (sockets) of the laptop.
  Can you help me please?

  thanx
  Nick

  Try to use a key USB * Y * cable that allows you to connect the external HARD drive to two USB ports.
  The point is that the common USB 2.0 ports provide 500mA max power.
  That is why it s advisable to connect two USB ports to make sure that enough power would be supplied on the HARD drive.