Store art 500 GB not recognized on Windows 7

Similar Questions

• Store Art HDD is not recognized by LG TV

  Hello

  I bought this hard drive:
  External drive HARD Toshiba StorE-Art500GB, 500GB, 5400rmp, 3.5-inch, USB 2.0

  after purchase I plugged on my lg lcd tv and it worked without problem.
  I unplugged it the TV to connect to my computer and put a few multimedia, reconnected to the tv, it worked again, but after awhile the tv refuses to connect to the hard drive.

  the hard drive is allowed when it is connected to a computer or other devices with port usb and other usb storage devices connect ok on tv.

  do you have any suggestions? I formatted the hard disk several times, but without success. is it possible that I can restore the factory settings on this hard drive, or is there anything else I can do?

  Post edited by: napalmique

  also, I think that there is a kind of stand-by function, because from time to time, I hear she's going "beep" and when I try to open a file from it, I heard it start to turn again, and it displays the file.

  Hello

  The HARD drive seems to work in relation to other computers, but it refuses to work only with the TV. Is this good?

  Well, what to say I recommend checking out the LG page for some firmware updates you can also consult the USP port options in the settings of your TV system
  I put t know if these parameters are available or not, but I think you should check it out.

  You could also format the HARD drive again and can store multimedia files again on the HARD disk in some cases new format can be useful

• Stor.e slim not recognized by Windows 8.1

  Hello

  A Stor.e slim external HARD drive is not recognized in Windows 8.1 (no problem with Windows 7). When it is plugged in, it s shown as a device not recognized. Driver is requested but not found.

  Hello

  Stor.E Slim external HARD drive is a 2.5 HDD USB 3.0 and 900mA power it requires to work correctly.

  I suppose that there is nothing wrong with this HARD drive, but with your laptop.

  8/8.1 win requires different drivers and you will probably need to install a suitable driver in order to get the USB ports work correctly (USB 3.0 as well as the driver additional chipset would be also necessary).

• Store TV 2 to - HDD not recognized in Windows 7

  My camera 2 TB store TV is no longer recognized by Windows 7.

  I went into Device Manager and the device is listed as "Unknown".
  So, in the device Mgr I uninstalled / reinstalled but still no joy.

  I think that the problem is a corrupted driver.

  I searched the Toshiba site and cannot find a driver for the device.
  Anyone know where I can get one?

  Hello

  This HARD drive is a Plug n Play device, which means that additional drivers aren t necessary.

  The question is: any other computer recognize the HARD drive?
  Have you checked all USB ports?

  This HARD disk can be connected directly to the TV via HDMI.
  It work?

• Optical drive is not recognized in Windows 8.1 (x 64) or in the UEFI System Diagnostics.

  Description of the problem:

  Optical drive is not recognized in Windows 8.1 (x 64) or in the UEFI System Diagnostics.

  Steps to recreate:

  UEFI:

  1. Start the PC in diagnosis system UEFI (F2 at the STATION)
  2. Pane controls
  3. Optical drive
  4. Sequential control
  5. Error: Optical drive not installed.

  8.1 Windows (x 64):

  1. Run Device Manager
  2. Error: No CD/DVD Drives section.
  3. Search for new hardware changes nothing.

  Relevant system specs:

  Mobile: HP Pavilion 15-n023sa (construction of vanilla)

  Optical drive: HP DVDRAM gu70n

  Steps already taken to solve:

  • Replaced the DVD drive with one of the similar specs of HP Pavilion. The replaced gn70n perfectly in the other machine. No change on problem laptop. Conclusion: DVD player works, and there is no problems with Windows 8.1 (x 64).
  • Removed DVD player. Restarted the computer. Sign in to Windows. Stop. Replace the DVD drive. Start the laptop. This is trying to solve defects of material with the PnP devices; more help to solve any problems of intermittent loose connection. Conclusion: No change.
  • Ran, troubleshooting of hardware and devices, via the control panel. Problem found: material changes may not have been detected. Explore more options just takes you through http://social.answers.microsoft.com/search/en-us/?query=hardware+device, that it is a 404 error page. Conclusion: Help and Support Windows is sorely lacking. They show no more information than just that something was detected as incorrect.
  • Ran the Microsoft FixIt troubleshooting of optical disc and auto repairman. (http://download.microsoft.com/download/F/5/8/F586FB7C-78E0-40EB-AF41-4C925F803CAF/CDDVDWin8.meta.dia... The convenience store has reported that the device was not found. He recommended to remove all power cables, power off, and various other things which have no relevance for computer laptop troubleshooting of switching equipment. He said: If the problem persists, contact the manufacturer. Conclusion: Windows troubleshooting can not solve the problem.
  • Run Windows Update to ensure that all updates and definitions have been installed. Conclusion: Windows is perfectly up to date.
  • Run a complete Rootkit and malware using Sbybot S & D 2.3 heuristic analysis. as a signature database scan using Windows Defender. Conclusion: Laptop is clean of rootkits and malware, to the best of my knowledge.

  Notes:

  The DVD player is NOT appear in Device Manager, OR in this PC.

  The DVD drive is NOT detected by diagnostics system UEFI.

  There is reference to the DVD in BIOS drive NUMBER , other than as an option of Setup, which is generic.

  The DVD player itself, works and has been verified on a different machine.

  The only possible conclusion is that the optical drive port mini-SATA on the motherboard is dead.

• Pioneer BLU - RAY and DVD discs not recognized by Windows 7

  The discs were fine until I installed Windows 7 Home Premium 64-bit. Before my hard drive crashed, I was using Windows 7 Pro 64 bit. The computer was built by a local store, so I don't know if they have done something special to get discs running, but readers are reported as compatible with Win 7.

  Readers are:

  PIONEER BDR - 205 Blu - ray

  DVD PIONEER DVR - 218L

  My motherboard is ASUS P6TD Deluxe, BIOS 0106

  I am very handicapped and rely heavily on my computer to work. I can't load my well-being critical software until I get these discs work, then I'll be very grateful for any help.

  Thank you

  Jeff

  Hello

  I suggest to follow the steps provided and check if it helps.

  Method 1: Run the troubleshooter of material and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Your CD or DVD drive is missing or is not recognized by Windows or other programs: http://support.microsoft.com/kb/982116

  Alternatively, you can install the drivers from here:

  BDR-205 Blu - ray Pioneer driver:

  http://www.PioneerElectronics.com/Pusa/Professional/computer-drives/BDR-205

  Method 3: Tips for solving common driver problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  See also: automatically get recommended drivers and updates for your hardware.

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Yoga Pro 2 - display not recognized in windows (hardware or driver problem?)

  Out of warranty by a month!

  Yoga Pro 2-256 gb, installed a new wireless card a month ago. Windows 8.1

  The touchscreen still work while the screen is black.

  System restarted after the mode 'sleep', in my opinion.

  The Lenovo logo is displayed, seems to load Windows, but when windows loads (I don't see it so it is a hypothesis of load) drafts of the screen and the black light is on.

  Can I connect an external monintor that connects after the return from sleep mode (odd). Who then off the backlight.

  When the external monitor, the internal screen is not yet recognized by windows.

  When I boot in safe mode, the internal display works fine with of course limited capabilities.

  I rebooted on the support site display drivers.

  Right now my internal monitor is not recognized by windows and is dark, and I can use an external monitor.

  Someone at - he of the clues as to what my happen? Hardware, driver etc?

  Can what information I provide?

  It is a pretty weird problem with contradictory observations.

  (1) screen working in Mode safe but not regular boot. (So not the hardware problem)

  (2) display on an external monitor in normal mode. (So, no drivers issue)

  Have you installed the wireless card yourself? You unplug the cable from the screen during the installation of the card?

  Could you re - open and check that all connections are good?

  The Wi - Fi card works well?

  I also recommend a complete reset of the laptop to eliminate the possibility that it is a corrupt driver. You can use the NOVO button to reset your laptop. Make sure you make a backup on an external drive for your personal files.

• Pavilion 550-122nd: Laserjet 1018 is not recognized in Windows 10

  LaserJet 1018 is not recognized in Windows 10 of 155-122nd Panilion.

  The "result of software and driver for laserjet 1018' has not failed (new driver)

  USB ports active aere

  Do I need a new driver for Windows 10?

  Is a new availabe driver for Windows 10?

  Thank you.

  Hello and welcome to the community of HP @Rikkie1,

  I understand that you're having trouble installing the drivers for your HP LaserJet 1018 on your computer Windows 10. I will do my best to help.

  Only the integrated Windows Print Driver is compatible with the HP LaserJet 1018 on Windows 10. Below, I have posted a link to a document that has some instructions on how to install and use the integrated Windows print driver. Please try all the steps in order and get back to me with the results.

  HP print driver printer - install and use the built-in Windows

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• My new Canon 70 d is not recognized by Windows 10 anniversary.

  Anniversary of 10 Windows running under Parallels 12 on a new MacBook Pro.

  Plug my 6 d and that it appears in the devices.

  Plug my 7 d and it does NOT appear in the devices.

  I have two other (not Canon) cameras that work with Windows.

  Using the same USB cable for two Canon cameras. Even tried another cable.

  I have two new cameras: 6 d and 70 d.

  The 6 d is modified and cooled by DS Central.

  The 70 d is original.

  MacBook Pro with 16 GB of memory running macOS Sierra.

  Using the same cable for two cameras, EOS Utility 3 that was installed for the 6 d running.

  The 6 d is recognized by the works and EOS Utility 3.

  The 70 d is not many EOS Utility 3 or EOS Utility 2.

  And curiously, the 70 d is also not recognized by Windows 10 (update birthday, running under Parallels on the MacBook Pro 12).

• CD/DVD drive not recognized by Windows all of a sudden

  The opitical drive had been used with problem. I removed a couple of days and when I came back it is no longer listed in "MY Computer". Put everything in the disc drive is not recognized. The drive does not appear on the list th of the material system. The drive has power since it extends and retracts. He tries (the light) to play the disc but stops.

  Hi Ranamaska,

  You can follow this link & check if the problem persists:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the following article: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows?

  Hope the helps of information.

• Your CD or DVD drive is missing or is not recognized by Windows or other programs

  I tried to apply the patch, MicrosoftFixit.dvd.Run.exe. He could not say "NET Framework initialization error. Unable to find a version of the runtime to run this application. If this is related to the framework version number .net (such as published in some issues) then Microsft back compatible fix to the problem. It should give a step-by-step procedure to solve these 2 problems. Microsft say DVD problem was know question and it was fixed in XP SP2. I installed Windows XP with SP2 and now updated to update to SP3. But the problem persists. Any help from anyone?

  shanglur,

  If you have installed all Windows updates, there's no upper/lower filters to delete, you can try...

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  But it's almost the same thing as above. I suspect that your cd/dvd drive may have failed.

  Rick

• How can I fix my CD-ROM drive or a DVD drive that is not recognized by Windows or other programs, so I can't play or access a CD or a DVD.

  How can I fix my CD-ROM drive or a DVD drive that is not recognized by Windows or other programs, so I can't play or access a CD or a DVD. Sometimes, when I click on one of the disks that it opens, but the page for the drive is empty. It also says to insert a disk, sometimes when there is a disc in the drive. How this can be fixed.

  Hi vtdubu,

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

• DVD not recognized by Windows

  DVD format

  I was not concerned about the codecs and such because I own a DVD player and do not need to play DVDs on my computer.  But now I have some records of EA games in DVD format and XP don't recognize I have a disc in the drive.  The Microsoft Download for codecs is useless.  How to fix XP to recognize ACCESS AND a computer on DVD drive?

  Hi MelFletcher,

  ·         You see the DVD drive in Windows Explorer?

  ·         Have you tried to play other DVDs?

  ·         You can fine CD?

  Follow this link and see if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• .mov file extension is not recognized by Windows Media Player

  original title; Media Player

  When I try and play a movie on my camera which is a Canon I get a message that says this file has an extesión (mov) and is not recognized by windows media player, what should I do to correct this

  You (possibly or) missing a codec.

  I suggest you only install this codec pack.

  http://www.free-codecs.com/download/Vista_Codec_Package.htm

  Main Page: click, download Vista Codec Package

  Second Page:

  Download Vista Codec Package 6.3 first a: 32 bit .zip File

  Download Vista Codec Package 6.3 second one: 32-bit .exe file

  Download Vista Codec Package 6.3 third one: 64 bit .zip File

  Download Vista Codec Package 6.3 fourth one: 64-bit .exe file

  This is the free safe and the best package on the web.

  He'll play 99% of files, so you will not need to download or use other programs.

  You can check here to see what's on your system.

  To check: Open Media Player, click Help in the menu, on the Windows Media Player, Technical Support information.

  Click here to see if you have 32 or 64 bit:

  Control the look of Control Panel, system, under System Type:

• DROID 2 not recognized by Windows media player to synchronize.

  Use Windows 7 and my DROID 2 shot used to synchronize with windows media player... run troubleshoot for the droid 2 and it says it resolved the problem, but the droid 2 is not recognized by windows media player to synchronize. It worked before, so I put still back the system and still no luck

  Hello Jack Cromwell.

  1. is your 2 Driod recognized in Windows Explorer and the Device Manager?

  2. did you of recent changes to the computer?

  I suggest you check if the Driod 2 is detected in Device Manager.

  Also try reinstalling the drivers for the device. Follow the steps to reinstall the drivers for the device:

  a. Click Start. In the start search box type "devmgmt.msc", and then press ENTER.

  b. Locate the (Driod 2) device in Device Manager.

  c. click on the "Driver" tab, click "Uninstall".

  Note: Make sure you have source to reinstall the drivers before you uninstall the drivers.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.