Store Art HDD is not recognized by LG TV

Similar Questions

• Store art 500 GB not recognized on Windows 7

  Hello

  I have problem with my HARD drive (its does not work on my Windows 7 64 bit).
  ->, it works on every xp, windows vista
  ->, I'm sure that my cable USB etc is ok
  -> my drive HARD is ok (I have two pieces of this and the two works do not on Windows 7 64-bit)
  -> When I phoned Polish Toshiba service told me that it does not work Windows 7 supports any external HARD drive...

  When I connect my Windows 7 HARD drive search for drivers and then there is only an error that it cannot find the drivers.

  Any ideas what to do?

  Hello

  What error you get exactly on Windows 7 on this external HARD drive?

  Normally you n t need any additional driver for external hard drives. What is the external HARD disk listed in Windows disk management?

  What version of Windows 7 are you using exactly? I would recommend the updates of Windows.

• HDD USB not recognized as "physical1" when creating the new virtual machine

  Hi all

  I wanted to create a new virtual machine, and I wanted to use my USB as a physical drive.

  But Workstation shows me "physical0" which is of course my drive internal.

  I tried USB pen drives. They are not recognized either.

  This somehow is no longer supported? I would have that it would be possible to use USB external HDD as the physical drive to a new virtual machine.

  you have installed VirtualBox?

  If so, you can try to use the virtuaklbox command line tool to create a descriptor of rawdisk for this disc.

  say diskpart on this drive? -It is "online"?

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

  You find me also in the PhD Virtual Backup support team

• Installation of XP Prof on Tecra A9 PTS52E - SATA HDD is not recognized

  Hi all

  I have a "nine" Tecra A9 (PTS52E) with Vista Business installed. However, I need XP Prof and a CD of XP - SP2 slipstreamed. The SATA drive is not recognized XP installation, so I need a driver of "F6."

  There are a lot of howtos on this for the 945 chipset, but I couldn't solve this problem on my A9 (Mobile 965 Express Chipset). I don't want to buy a USB floppy for one-time-installation drive. So I have to build the driver (iastor.sys and more) in the XP installation disc.

  A few problems: there seems to be no easy way to do this, because intel only provides files *.inf for the ICH8R (RAID =) controller, which does not exist in the A9. So I have to change the *.inf files, correct?

  Another thing: I saw in an another post here the discussion on switching to AHCI in the BIOS in compatibility mode. I can't find a way to change this setting.

  Aargh, I need this laptop for my work on an A8 (which is also mine), I installed XP without any problem.

  Can anyone help?

  Thank you

  Michael

  Post edited by: michael-cologne

  Nice info I m interesting in the XP installation process.
  It would be great if you could post a few steps.

  Thank you

• 20 GB of HDD is not recognized by Tecra 8100

  Hello
  I just got this laptop Tecra 8100 and I am trying to upgrade its 12 GB with a 20 GB hard drive, a. I formatted the drive of 20 GB of my office using a portable USB Caddy before putting it in the laptop.
  When I boot up to install XP, and before she starts copying the installation files, it will give an error message telling me that no player has been found and restart.

  Any idea how do I get the new drive recognized?

  Thank you

  Hello

  I discovered that Tecra 8100 supports only the 6 GB (9.5 mm thick), 12 GB (9.5 mm thick) and 18 GB hard drives (12.7 mm thick).
  It seems that the 20 GB HARD drive is too big and so the BIOS does not recognize the HARD drive and you can not install the operating system.

  Unfortunately, there is nothing to see.

  PS: You can try to update the BISO but I put t I think this will help.

• Data store 6.0 VMWare not recognized after the last batch of hotfixes installed on HP custom image

  Hello guys,.

  Maybe you can help me:

  I installed VMWare 6.0 on a server HP ML350 G9 with image OEM offered custom HP, ESXi - 6.0.0 - 2494585-HP - 600.9.3.30.2.

  This works perfectly.

  Now I am trying to apply the latest available official patch (ESXi600-201507001), but it seems to kill some important VIB

  VIBs installed: VMware_bootbank_esx - base_6.0.0 - 0.11.2809209, VMware_bootbank_lsu-lsi-lsi-mr3-plugin_1.0.0-2vmw.600.0.11.2809209, VMware_bootbank_lsu-lsi-megaraid-sas-plugin_1.0.0-2vmw.600.0.11.2809209, VMware_bootbank_misc - drivers_6.0.0 - 0.11.2809209, VMware_bootbank_sata - ahci_3.0 - 21vmw.600.0.11.2809209, VMware_bootbank_scsi - hpsa_6.0.0.44 - 4vmw.600.0.0.2494585, VMware_bootbank_scsi - mpt2sas_19.00.00.00 - 1vmw.600.0.0.2494585

  VIBs deleted: Hewlett-Packard_bootbank_scsi - hpsa_5.5.0.106-1OEM.550.0.0.1331820, LSI_bootbank_scsi - mpt2sas_15.10.06.00.1vmw - 1OEM.550.0.0.1198610, VMware_bootbank_esx - base_6.0.0 - 0.0.2494585, VMware_bootbank_lsu-lsi-lsi-mr3-plugin_1.0.0-1vmw.600.0.0.2494585, VMware_bootbank_lsu-lsi-megaraid-sas-plugin_1.0.0-1vmw.600.0.0.2494585, VMware_bootbank_misc - drivers_6.0.0 - 0.0.2494585, VMware_bootbank_sata - ahci_3.0 - 21vmw.600.0.0.2494585

  The next time I reboot the server, the data store is not available, no more and I have to do a restore. I suspect that the new bootbank_hpsa is the origin of the problem.

  So, how to install the latest patch without losing the data store connectivity?

  Thank you

  What should work, is to download the latest driver hpsa in the/hpq/latest/esxi-600-devicedrivers Indexand install it just after the connection of the host (prior to restart it). The .zip file contains a bundle off line as well as the .vib file.

  André

• Personal Media Drive (HDD) is not recognized in HP xb4 Docking Station laptop with HDX 18i

  Hello:

  This is my first post since obtaining these three pieces of equipment.

  a lot of problems with my new laptop and separate hard drive docking station.

  But this one is the most annoying:

  my HP Personal Media Drive HD10000x slips into a Bay (specifically for these players) on my xb4 docking station.

  Connected to the docking station is my laptop, a HDX18.

  Everything works very well between the laptop and docking station, except the HARD drive: it lights not or anything when you slide into the dock media Bay.

  This is supposed to be 'hot-swapable' and everything, but it is just dead.    It's new, but I hate to send it back (at my expense) if there is another problem here.

  If someone has encountered this?

  Help, please!

  Thank you

  You need to connect the power adapter to the personal media player - at the back of the dock XB4, next to where sits the personal media player.  So there are two adapters CA / CC plugged into the XB4.

  Message edited by taylorspam on 11/23/2009 07:45

• Re: Toshiba Store Art Exteranal 320 HARD drive not recognized

  Hello

  I have a problem with my 320 GB Toshiba Store Art HDD Exteranal.
  I bought it a week ago and everything worked well on different systems: Win 7 (64), Vista (32), XP Pro.
  But today when I tried to use it it displays a message that * unrecognized device * and it cannot install the driver for this device.

  Unfortunately there are no drivers to download for this device drivers Toshiba page.
  I checked it on Win 7 (64) and Vista (32) - same problem.
  I remember, the last time that I used it was on XP Pro.

  I checked the internet for a solution, but in the end I had to write a message here.

  Hope for more help.

  > I bought a week ago and everything worked well on different systems: Win 7 (64), Vista (32), XP Pro.
  > But today when I tried to use it it displays a message this device not recognized and it cannot install the driver for this device.

  If the HARD drive worked perfectly in the past without the use of drivers, then I guess that this has nothing to do with a missing driver.

  In your case I would recommend to check and test the HARD disk on another computer/laptop running a Win XP or Vista.

  If the drive HARD wouldn't connect and would not be functioning with the help of other computers, then a hardware problem is possible

  PS: this external USB hard drives are Plug & Play compatible and so a pilot should not be necessary!

• TOSHIBA StorE Art 2 TB external hard drive not recognized by HP Elite /Win7

  I have a new HP Elite desktop computer running Windows 7 Home Edition:
  A few months ago, I bought a Toshiba Store Art HDD Ext 2 to, which until today has worked well. Today, I started the PC in the morning (with no updates of Windows or other software) to find that he would recognize is no longer the Toshiba hard drive. He always recognizes the WD drives and SimpleTech drives when they are plugged. All external drives are powered separately and do not rely on the power of USB.

  I tried the Art Store on other PC and it works fine. I tried to change the cables, the cable works on other players (and other cables will not do this work of Art store). I tried several ports USB 2 on the PC, with no luck * (but all the ports work with other readers).

  I try verified Drvivers of COMPUTERS and MANAGING disks. There is no sign of the disk (not defective disc), it is simply not there at all.

  I searched on the web - try a variety of techniques (disconnect the power PC) and much more. No luck.

  PC specifications are:
  Operating system
  MS Windows 7 Home Premium 32 bit SP1
  CENTRAL PROCESSING UNIT
  Intel Core i3 530 2.93 GHz 30 ° c.
  Technology of 32nm Clarkdale
  RAM
  3.00 GB Dual-Channel DDR3 @ 665 MHz (9-9-9-24)
  Motherboard
  MSI 2A9Ch (CPU 1) 38 ° C
  Graphics
  HP L1906 (1280x1024@60Hz)
  ATI Radeon HD 5450
  Hard drives
  488 GB Seagate ST3500418AS (SATA) 31 ° C
  Optical drives
  Device USB WD virtual CD 1110
  HP DVD-RAM GH60L
  Audio
  Realtek High Definition Audio

  Works well with all other readers. and it worked with Toshiba until this morning.

  Clues?

  Thank you

  I put t really know what can be the problem.
  If everything worked a few days previously, first try to make back the OS using System Restore tool just to see if this will help.

• Store TV 2 to - HDD not recognized in Windows 7

  My camera 2 TB store TV is no longer recognized by Windows 7.

  I went into Device Manager and the device is listed as "Unknown".
  So, in the device Mgr I uninstalled / reinstalled but still no joy.

  I think that the problem is a corrupted driver.

  I searched the Toshiba site and cannot find a driver for the device.
  Anyone know where I can get one?

  Hello

  This HARD drive is a Plug n Play device, which means that additional drivers aren t necessary.

  The question is: any other computer recognize the HARD drive?
  Have you checked all USB ports?

  This HARD disk can be connected directly to the TV via HDMI.
  It work?

• Toshiba Store Art 4 USB 3.0 1 TB works not with USB3.0 or USB 2.0 port

  Hello
  I have a big problem with my external hard drive and I hope someone can help me.

  Here's the thing:

  I used my external drive only on computers that don't have any port usb 3 and all worked well. The drive has been used only with usb ports 2.

  Now, I got a computer with a usb port 3 and I was happy to be able to use my external hard drive at full speed.
  Has been fine until I wanted to transfer a file using my drive.

  The disc has been recognized either of usb ports 2. The NTFS partition is a partition BRUTE! I had to ' chkdisk/f G:' to make it work again on my usb ports 2. And some files were missing!

  Then, back on my other computer (usb port 3), the contents were not the same! I mean some of the files that I deleted when it is plugged into usb 2 returned when plugged usb ion 3! And then, back to the usb 2, partition became RAW and I had ' chkdisk/f G:'... once again!

  So, to make it as simple as possible, after some testing, it seems that the drive can only be used on the usb ports 2-only on ports usb 3 but can not be used at a time, which is very annoying for a portable external hard drive.

  I tried to format the drive to my usb port 2 and return on the usb port 3, the content came as if I had never formatted it and then back on the usb port 2, the RAW score again...

  I use Windows 7 and 8.1 Windows computers.

  Someone at - it experience that? What is the drive (Toshiba Store Art 1 TB USB3 4)? What is the USB 3 specification? Is - Windows 7 or 8.1 drivers?
  And above all: what can I do?

  Thank you very much!

  This external plug & play Toshiba HDD supports two USB standards: USB 3.0 and USB 2.0
  HARD drive around needs bus power 900mA to work correctly.

  The USB 3.0 port supports this standard 900mA. The USB 2.0 port allows only to 500mA.
  If in case the HARD disk is not working properly connected to the USB 2.0 port, I recommend you to use a USB cable to Y in order to connect the 2 ports USB 2.0 HARD disk.

  I have no idea why the content on the HARD drive is different, but from my point of few of the USB standard does not affect content.

  In my opinion, the HARD drive wasn't working properly using a USB 2.0 due to the low power.

  By the way: this HARD drive supports some additional features like the ability to oversight function and monitor to alert of the disk space that sends a alert when there is not enough available storage space.

  For advanced users, Toshiba has added the ability to customize the backup routine, including the ability to select only the most common file types for backup and change how many times a backup takes place.

• Stor.e slim not recognized by Windows 8.1

  Hello

  A Stor.e slim external HARD drive is not recognized in Windows 8.1 (no problem with Windows 7). When it is plugged in, it s shown as a device not recognized. Driver is requested but not found.

  Hello

  Stor.E Slim external HARD drive is a 2.5 HDD USB 3.0 and 900mA power it requires to work correctly.

  I suppose that there is nothing wrong with this HARD drive, but with your laptop.

  8/8.1 win requires different drivers and you will probably need to install a suitable driver in order to get the USB ports work correctly (USB 3.0 as well as the driver additional chipset would be also necessary).

• 3 TB Canvio Stor.E not recognized correctly in the USB 3.0 port

  I have four of the HDWC130EK3J1 external Stor.E Canvio Desktop HDDs.
  If more than one USB 3.0 drive is connected the partitions are not recognized.

  The GPT partitions are displayed as MBR partition protection.
  The MBR partitions are displayed as never applied.

  The drive is detected correctly after that he was to reinsert and close ofd.
  At the same time, only 1-3 partitions are recognized correctly.
  This problem can be reproduced 8.1 running Win and Win 7 64 bit using two different computers, by using the USB Intel and Nec controller.

  Currently, BIOS, update driver update. The HDDs are checked to find errors.
  Is there an update to flash ready or a replacement for the external hard drive option?
  Please note that a replacement with the same model makes no sense.

  My German Embassy has been blocked so I translated it. Sorry the only translator Google

  There could be a simple answer to this problem:
  There are two standards different MBR and GPT partitions.

  MBR works with drives up to 2 TB in size, but it can record handle t with more than 2 TB of space. MBR also only supports up to four primary partitions if you want more, you have to do one of your primary partitions an extended partition and create logical partitions inside.

  GPT (GUID Partition Table) is a new standard which replaced the MBR. The TPG requires UEFI. This standard isn't limited like MBR and readers can be much larger and size limits depends on the system and its file systems. It allows an almost unlimited amount of partitions.

  I guess that the system cannot recognize the partitions (from additional external HDD) due to the limitation of the MBR.

• HDD and dvd are not recognized in the configuration menu, what could be the problem?

  The hard drive and dvd drive are not recognized on the configuration menu for my desktop Pavilion a4316f.  What is a controller failure?  A PCI controller can be used to replace the motherboard controller?

  dhobs,

  Anguish, that the suffering of the faulty motherboard has been aggravated by your actions. Why you decided to perform a restore (which re - formate the disk, erase all your data files (documents, photos, videos to misic,) is really amazing.)

  You had a viable BONE, work and the data store. You he clobbered with recovery. As explained, the 'tattoo' reads the embedded hardware configuration and will stop at the resumption of treatment if it detects a change.

  Only temporary help I can offer is to open the computer case and install a small 12v on the NVidia chip fan. IF the chip is not 100% burned, you can earn low enough time to reinstall the operating system and then add the map.

• PX1394E - 3 50 (500 GB HDD USB 2.0) not recognized by Win XP SP2

  Hello. I just bought and traded because I thought the first was faulty, a PX1394E - 3 50 500 GB HDD USB 2.0 external hard drive that uses Fire Wire, USB. Now I ve tried all USB devices, to begin with it uninstailling everything on we / off on to just pluging it when we / off and it keeps saying be the devide was not recognized and it doesn't propperly (small box pop up bottem left of the screen)

  Now Issve exchanged it once already, and he said that the unit was defective, but having exactly the same problem with two different cameras? This seems a little more bad luck for me.

  If anyone can help, that´d be great.

  -Dan

  Hello

  You have software of Regen with your HARD drive? I don't know if this can help, but check the Toshiba download page and you'll find a version for Windows XP Home edition. Maybe this will help.