STR-DN850 remote control

Similar Questions

• Remote control Medai vs STR-DN1040 cannot change the source?

  I just installed my Sony STR-DN1040 home theater receiver and have a few questions about the media remote ap...

  (1) I have it all connected and registered and the ap is functional, but in "remote mode", it lists all entries in my (BD, cable/satellite, DVD, FM, etc) as buttons, I can support on and they light up and make a tone of confirmation on my iPhone 4s, but they do not change the source to the receiver.  The rest of the features seem to work and if I use the media remote ap for go to the GUI menu, I can arrow over 'look' and then select a source, and that works fine.  The problem is when you are in another room and want to power on the receiver, then choose an audio source and play without having to turn on the TV or be in this room, you can't (or at least I can't) because the hot-key source on the ap do nothing.  What did I miss?

  (2) I have programeed the 1040's physical remote to control my Samsung Blu - Ray player.  The Medai remote access point can now also control it, or is the 1040's remote physical a completely separate device?

  Thank you!

  Hello Apcrews,

  The STRDN1040 was intended to be used with the Sony 'TV Sideview demand' which includes many new features and replace the existing approx. remote media TV Sideview will will allow you to switch between inputs, however there is no visual feedback in the app, so you'll need visibility on the front panel of the receiver or GUI.

  The application will not work to control your player of Samsung BD. The reason is that you have programmed the 1040's physical remote to control the player of comic book via codes IR (infrared), these codes resident in actual distance rather than the receiver and the orders are sent directly from the 1040's remote control.

• do I have to set my remote control receiver only?

  I have a STR-K790 receiver. I need the codes for a universal remote, unless I can fix manully

  Hi Stooney,

  You will need to use a remote control to set a radio station in the receiver STR-K790 system.

  Is the universal remote you are talking about is branded Sony? If you use a universal remote control from Sony, the control code for Sony receiver is 01 or 001. However, we are unable to provide support for remote controls designed by other manufacturers. Manufacturers may set different code numbers in their universal remote controls to identify the infrared (IR) signal of a Sony product. Thus, the code number used to operate a Sony product in one remote can be different from the one used by another.

  For more information on the planning of a third-party remote control, contact the manufacturer of the remote control.

  If my post answered your question, please mark it as an "accepted Solution".

• I got an Apple TV, but it wasn't charger for remote control

  My Apple TV I have baught had no remote control charger what should I do?

  I have no answer.

• iPhoto und remote control

  Kann der of mit man Laufwerk eine Dia-Show taxes (loss/weiter) remote control?

  Google translation:

  Can I use the remote control Remote control slideshow (stop / continue)?

  If you still use aluminum Late 2008 MacBook 13 "the answer is Yes.  It has an IR compatibility for use with the Apple Remote.

  

• The remote control comes charged out of the box or it must first charged?

  The remote control comes charged out of the box or it must first charged?

  It is usually quite busy, mine was about 85% when he arrived. It's a question about the pre purchase or you have a problem with your remote control works not.

• Remote control/software Apple TV with the App Store problems

  Seems ridiculous that a Sept 2016 4th Gen apple TV purchase has the same problems of connectivity with the App store. Impossible to connect, or even choose App store, or spare parts offline, erratic, glitch and acts as a problem of distance, but seems to be a software problem or interface. Obvious corrections or ideas to stabilize or least to increase connectivity to app store with 4th Gen Apple TV/remote control?

  No problem of connectivity with a 4th getting Apple TV remote here... Sorry, you encounter this problem with it.

  See if there is something that will help that you haven't tried in this article to support > set up the Apple TV Remote - Apple supported application

• How to stop the remote control to the setting

  How to stop the remote control to the setting

  Disable the settings > general > accessibility > voiceover.

• Remote control does not work, and the load does not appear on Apple TV

  Hello

  I just returned from vacation and my remote seems has stopped working.   Naturally, my first assumption was that the charge was simply exhausted.

  Apparently that was the case.   He seems to have just died.

  I did pay for more than two hours and it still does not appear under devices Apple TV.

  My Apple TV 4 works very well because I use the remote control of my phone to navigate through it.

  If I understand correctly what I look at you, it seems that the remote control is same not synchronized or recognized by Apple TV more.

  Any suggestions on how to fix this?

  A reset is complete? Restart... no change.

  Thank you

  Bob

  1. Have you tried pressing the menu and the button for a few seconds while it now an inch or two away from the Apple TV, if successful, you should see a message on the screen saying the remote was paired.
  2. If you have an older remote from a previous model MacBook or Apple TV, you can use to restore the Apple TV, which, in many cases, has been sufficient to reactivate the remote Siri. You must complete all upward to undertake a restoration.
  3. If you have a USB cable - C you can try to restore by connecting it to iTunes on a computer.
  4. If you have tried all of these steps, don't have a distance sooner or a USB - C cable or their use is too inconvenient, return it to the store where purchased for a replacement, or to couple for you.

• Using a remote control or the remote with two Apple TV app?

  1 can a remote AppleTV, is the most recent or a last generation we use with two different AppleTV (one is the most recent and is the older generation)?

  2. an iPhone Remote APP can be used with two different Apple TV?

  Thank you.

  1 not easily. There is no way to select the device to control, you end up control both. You could get a programmable remote control and lead to control different devices, but this would require a deception.

  2. no doubt. The Remote app offers a grid of all ATVS, he knows, and you choose the one to control. It has the advantage of a keyboard for searches, passwords, etc. Do you need a remote pair with each ATV.

• Remote control for Apple TV

  Is - is this posible?

  Yes. Apple Watch has the Remote app, you can use to control your Apple Tv.

  Use your Apple Watch as a remote control for your Apple TV or iTunes - Apple Support

• Remote control loses connection several times

  Remote control repeatedly goes off line and then throughout the programs.  We loaded so that we can check the list of probable causes.  It has become a source of irritation when you're immersed in a movie and that appears on the screen.  Any fixes or suggestions?

  I guess you are referring to the distance of Siri to Apple TV version 4. If so, I think it turns off the Bluetooth radio when he sleeps. When you wake up it upward, probably by moving it (remember, it has a movement sensor), it reconnects and ATV reported 'remote control connected. " If this message is your problem, you could make it clearer in your title and description. Since you are immersed in the movie, I assume that you do not use the remote control to control the system. If leave him you alone, he has to sleep with happiness. If you use it to adjust the volume, maybe you can use a different remote for it.

  In addition, your profile (GIS) said Apple TV 2 iOS 9.2.1 which makes no sense. You should correct it, maybe for Apple TV 4, tvOS 9.2.1.

• How can I remotely control the music on the 4th generation Apple TV

  On the 3rd generation Apple TV, I could use the app Remote for artist, Albums, songs and playlists which was to play directly from the Apple TV remote. This allowed me to sit on the deck and set or change my playlist remotely while my Apple TV played on and on. I couldn't count on Airplay from my iPhone to the Apple TV because of being at the edge of my wireless connection. So I used the application to load a playlist on the Apple TV, which was always in range and connected to my stereo.

  With the 4th generation, I can't find an option to load remote a playlist, artist, album, or song. I can only handle what has been loaded using the physical remote control and a TV screen that beats my goal. I bought the 4th generation, because the 3rd generation could not access my subscription of Apple's music while the 4th generation can.

  Am I missing something or is the 4th generation Apple TV / Remote app missed something?

  Make sure that your Remote application is up-to-date. The current release is 4.2.3 and fully supports the music playback controls.

  Remote by Apple

  https://appsto.Re/us/g198q.i

• For the remote controls of the Keynote?

  I want to use a remote control for a presentation in Keynote, I'll give.  It will be my first with a remote control, but which is later - should I buy a (If Yes, who?) or what is the last and the best app for me to use my iPhone as a remote control (which I prefer, a gadget to lose less!)?

  Please use a simple language with me, a digital native.

  I use my aging MacBook Pro with OSX 10.7.5, my speech is 5.1.1 and my iPhone is a 6s.

  Thank you!

  Using a method rather than another is a personal preference, my preference as a coach and lecturer working in several different locations is to use Keynote for iOS, it has built in the remote control feature:

  Tap to go to the next slide

  previous slide scanning

  Pen tool marker on the screen

  the highlighter to screen

  the iPad displays the screen of the presenter, showing the next slide and notes of the speaker of the presentation on the Mac

  

  There must be a wifi network present, you can connect; many businesses teaching institutions lock unregistered users by default

  The site Web of Keynote iOS is here: Keynote for iOS

• Problem remote control Apple TV (not the App)

  Hello

  I have an Apple TV (3rd generation) and the remote no longer controls.  I have it odd and paired again, but still does not work.  I downloaded the Remote app, but that does not give me access settings, and that's what I have to do.  We changed provider Internet and the need to configure it with the new password, so he goes on the network... Any suggestions?

  TKS

  SACA

  When you say that the remote control does not work, to what it means? It is not recognized? It is not a click? Installed new battery?

  I was using the Remote with ATV 3 years app and it works beautifully. If it is coupled?