Strange behavior of Flash in Firefox

Similar Questions

• Strange behavior USB Flash Drive Satellite A100-626

  Hello

  I did install Windows Vista Business Edition on my Satellite A100-626 (PSAA9) following the instructions provided in the Web page of drivers.

  So far, everything works as expected, except for one little (or no) question.

  When I ask Vista to 'Remove hardware safely' my USB Flash drive, a Popup appears telling me to remove it. So far, so good :D

  The only thing is that the flash player is not put out as could be expected and and yellow question mark appears in Device Manager.

  Opening of the question mark can read what follows:

  "Windows cannot use this hardware device because it has been developed to remove safely, but it has not been removed from the computer. (Code 47) To resolve this issue, disconnect the device from your computer and plug it in again. »

  Following the instructions above, the light turns off, lol...

  Someone else met this strange behavior? If so, any solution?

  I tried a few USB flashes that run well on XP and they both do the same thing.

  Thank you, Nuno!

  Hi Nuno

  It's very strange. I have the Satellite A100-504 (comes with Windows XP Home edition). Last week, I installed Vista and all the stuff followed Toshiba document instructions facilities. I use the mouse wireless, external HDD USB web cam. With the help of these external devices together I never noticed a similar behavior.

  You have the same situation with all the USB ports?

• Strange behavior of Flash

  Here's a video explanation:

  www.YouTube.com/watch?v=La5yFqNYWCk

  If I use the pen tool and try to establish a line in a symbol, the anchor at the other end of the line moves [beyond my control] to the right. I don't know if it's a bug or a feature, but I'm leaning toward the former; Whatever it is, please could someone offer me a solution?

  ---------------------------------------

  • Adobe Flash CS5
  • Mac OS x 10.7.2

  ---------------------------------------

  I will provide any additional information willingly.

  Thank you.

  Well, that's a guess, but it seems to be about as there is a corruption in this symbol. It is good that it seems that you can take the art of the symbol and paste it into a cool symbol and get rid of the problem. I hope that it will be a reasonable solution for your project. Remove this symbol once you have finished to draw shapes in a new.

• Firefox crashes (and other strange behaviors) due to gifs

  From a recent update Firefox displayed a strange behavior that surrounds the gifs. Sometimes, after viewing pages with a large number of gifs or several very large gifs, Firefox will do things like not animate gifs, or even do not load the images at all, an and will not stop until I have restart Firefox. What's more concerning is that sometimes in these situations, Firefox will simply hang and stop responding, forcing me to kill the process.
  This page shows the behavior of hanging fairly regularly: http://www.neogaf.com/forum/showthread.php?t=1021843 & page = 21
  It seems more likely to happen when I scroll the page quickly. The behavior persists when I restart Firefox mode without failure.

  39 of Firefox seems to have solved the problem.

• I get a strange behavior of the bar tabs and the address bar in Firefox 29,0 for Mac.

  I just installed Firefox 29,0 for Mac.
  I have a strange behavior of the bar tabs and the address bar with this new version.
  Instead of the address bar, I get two rows of symbols. And it is impossible to write anything in the address bar.
  (I add a screenshot, but I can't find a way to do it).

  Firefox has an RSS icon in the palette of the toolbar that you can drag a toolbar (but not on the location bar container).

  • Firefox menu button > Options/Preferences > toolbars
  • View > toolbars > customize

• Strange behavior of audio subsystem after update Dev Alpha 10 to 10.0.9.388

  Hello world!

  Has anyone noticed a strange behavior of the behavior of 10.0.9.388 audio subsystem firmware. Recently, after firmware update Dev Alpha 10 to 10.0.9.388 subsystem audio misbehavies in the following way:

  (1) if the external headphones/speakers connected to the audio line-out looks to be preprocessed by low-pass filter and surround effect. The device reported by AudioManager is/dev/snd/pcmPrefferedp. Would it be a bug in formware and re-routing audio internal speaker to the line-out socket did not exclude specific pre-treatment?

  (2) on the previous firmwares if audio goes out of the internal speaker and then the helmet is connected to Jack line out change of itinerary was seemlesly happening and he kept playing with headphones without additional measures in the application. Now, peripheral audio is not consume audio samples and so crashes until it is closed and reopened.

  On the previous firmwares were not all the problems of this kind. Would be - what a few unlucky flashing firmware try (if it is still possible) or bug of 10.0.9.388.

  It will be good to hear comments & thoughts about these questions.

  Best regards

  Dmitry.

  I suggest to create two entries Issue Tracker: https://www.blackberry.com/jira

• behavior of flashing phone version

  I have a site I'm working on a client.  You can see it at https://morganyatesstudiosalon.businesscatalyst.com.  The problem appears only on the version of the phone (see the problem you will need to pull up on a phone) on the comments page and Contact page.  It seems that the pages are withdrawn in other charts, but only in hot flashes.  Very strange behavior.  Any ideas?

  You have activated HiDPI and used a background image which is huge, which severely impact on page loading performance. Normal res image loading and then the resolution Retina image is loaded. On my connection at home, it took about 15 seconds to load just an image. All other images appear to be reasonable sizes.

  If you replace the image of background fill vintage_wallpaper with a version which is resized to 1632 x 1224 it will radically improve the browser to run this page.

• Re-enable flash in firefox 19.02 10.3

  I need flash 10.3 for other software. 11 does not work for me. I know what risks and keep my computer clean. 19.02 Firefox has decided for me that I couldn't use flash 10.3.183. This breaks my other software. It's not my fault Adobe screwed flash. How can I activate flash on firefox and seamonkey.
  If there is no other choice I will downgrade to earlier versions.

  I used your link. I tried the .exe and the msi installer. Exe said this is not the latest version and wants me to get version 11. The msi installer gives me error 1722. Part of Setup is to not "finish as planned. This has happened in the two victory 8 and vista.

• I can not access to sites such as Youtube or truckcam.tv it seems that the problem may be with the most recent Adobe flash and firefox as browsers further

  Question
  I can't access to sites such as Youtube or truckcam.tv , seems, the problem may be with the last Adobe flash and firefox as other browsers work I reinstalled both, but without success, even on the two desktop using Vista and laptop on Windows 7

  See:

  • https://support.Mozilla.org/KB/Flash-113-crashes

• Strange problem with flash player

  Every time I open a Web site with a flash (Youtube, flash games), Firefox crashes. I tried to reinstall Firefox and flash player, but it does not solve this problem
  Sorry for my English

  See:

  • http://KB.mozillazine.org/Firefox_crashes
  • https://support.Mozilla.org/KB/Firefox+crashes

• Shockwave flash crashes firefox 4

  Shockwave flash causes firefox 4 crashes. Sometimes they use the most recent or the previous version of flash. remove the flash has solved the problem but remove the flash isn't a solution. This happens on a computer with Windows 7. However on another computer with XP, this does not happen.

  1. Download a copy of Flash from http://get.adobe.com/flashplayer/ and save it to your desktop.
  2. Then download Flash uninstaller
  3. Close Firefox via file | Output
  4. Run the uninstall program to remove the Firefox Flash. It will also remove IE.
  5. Reset
  6. Run the Flash Installer that you downloaded to your desktop (do not start Firefox). This will install on Firefox only.
  7. Open IE, go to http://get.adobe.com/flashplayer/ and choose run when you see the prompt.
  8. Test the installation in Firefox and IE by visiting: http://www.adobe.com/software/flash/about/

• redeclenchables strange behavior digital output

  I created a redeclenchables digital dashboard task (finished) digital output as follows: (in DAQmx C)

  DAQmxCreateTask("",&_taskHandle);
  DAQmxCreateDOChan(_taskHandle,"/Dev2/port0/line6","",DAQmx_Val_ChanPerLine);
  DAQmxCfgSampClkTiming (_taskHandle, "" / Dev2/Ctr0InternalOutput ", _clockRate, DAQmx_Val_Rising, DAQmx_Val_FiniteSamps, static_cast (_sampleCount)");
  DAQmxCfgOutputBuffer (_taskHandle, static_cast (_sampleCount));
  DAQmxCfgDigEdgeStartTrig (_taskHandle, "/ Dev2/PFI4", DAQmx_Val_Rising ");
  DAQmxSetStartTrigRetriggerable (_taskHandle, true);
  DAQmxWriteDigitalLines (_taskHandle, static_cast(_sampleCount), FALSE,-1, DAQmx_Val_GroupByChannel, _pDigital, NULL, NULL);
  DAQmxStartTask (_taskHandle);

  sample clock:

  DAQmxCreateTask ("", & _taskHandleCO);
  DAQmxCreateCOPulseChanFreq (_taskHandleCO, "/ Dev2/ctr0","", DAQmx_Val_Hz, DAQmx_Val_Low, 0,0, _clockRate, 0.5 "");
  DAQmxCfgImplicitTiming (_taskHandleCO, DAQmx_Val_ContSamps, _numSamples);
  DAQmxStartTask (_taskHandleCO);

  When I run the task without redeclenchables parameter, it output a correct signal. However, if I run with redeclenchables it out almost exactly 2 times faster than normal. For example, a pulse whose width of 10 ms became 5 ms and repeats again to be 2 pulses of 5 ms. This is repeatable, no matter how much or how fast triggers provided.

  My card is PCIe-6363. I do not know what causes this strange behavior, and I hope someone can help on this.

  Thank you.

  It disappears after reset configuration. Might be interesting for future reviews.

• Strange behavior with the function «Help in command line»

  So I do a little playing with the opening of the files compiled help (.chm) with the command-line help feature, and I saw a strange behavior when trying to index multi-level access keywords. According to the documentation, if you set the 'Key' operation, you can enter a value for ' string to search for "to access this section. The more precise help that:

  If this string contains a keyword index, the string must match the key of the index as it appears in the help index file. To access a topic with a multilevel index keyword, enter the keyword of the top-level index, a colon and the keyword of the second level index. Do not separate the elements with spaces. For example, a chain of error codes: GPIB jumps about a subject with a keyword of top-level index of error codes and a second level keyword index of GPIB.

  All right, seems simple enough. Except that when I tried, I couldn't work, even with the example provided. I tried the following simple test:

  

  Opens the help file, but it opens to this page, not to the page ' error codes: GPIB "non-descript. I saw this in 8.2 and 8.6. Anyone have any success with access to a multi-level keyword?

  Note - side

  Curiously, the Index for the help lvconcepts.chm file looks like this:

  

  In other words, the input index text is just "GPIB", but the text that appears in the keyword field is "codes error, GPIB. I'm curious to know how this was accomplished. I decompiled the lvconcepts.chm file and watched the .hhk file, and it is not immediately obvious to me. (By the way, if you try to use "error codes, GPIB" it does not either).

  Hello

  Please contact National Instruments!
  It is a very strange behavior.  I tested out and seen the exact
  same results you are experiencing.  This was reported to R & D (AUTO ID # 130246) for further investigations.
  From what I can tell the a possible workaround solution that we have documented
  in the post of root Canal.  I can't continue to look into this in order
  to see if there is no other workaround solution or a reason why it is
  run in this way.  Thanks much for the feedback!  If
  you have any other questions on this subject please post them here.
  Have a great day!

• Strange behavior file open/create/replace

  Hi all

  I will make my question as broad as possible because I think someone must have met this behavior before. I use the function open/create/replace file to programmatically open a file, giving a path entry created in an earlier vi. Strange behavior, I see, is that although Labview returns 1 error when I give my file programmatically, it reads the file OK if I give as a constant. The constant path that I give is exactly the same as one I am tryinng to programmatically.

  Any suggestions? Is it to do with a string formatting problem? I enclose my portion of treated VI the path_in section.

  Thanks for your time,

  Kind regards

  Harry

  Wild guess: you must use 'build path' instead of 'concatenate strings' build path.

  (Also use a constant of diagram of the path (not a string!) to "c:\ni-rt\" and get rid of the "trim whitespace' and the 'chain of path")

  See if that makes a difference. (build path is OS independent, while the operations of independent channels are not).

  Never use the paths as strings. There are very few cases where this would be appropriate.

• Issues coming out of "sleep mode" and strange behavior when restarting with GPU

  I use a desktop computer HP P7-1240 completely stock except for a GPU EVGA GeForce GTX 750 TI SC. The GPU works well when the computer is running (which is strange because the forums have several other discussions mentioning the 700 series must be incompatible with my BIOS).

  However, there are two main strange problems that have arisen since the installation of the GPU. One is that, every time that the computer enters mode "sleep", he refuses to wake back up correctly. It seems to me that the computer active but sends all the signals back panel (at the very least, no video because my monitors remain blank). On rare occasions, he wakes back correctly, but at least 90% of the time, it must be restarted. Upon reboot, the same problem sometimes (not), and the computer must be rebooted a second time until it will start again.

  This leads to the second problem. During startup, the computer goes to a black screen, listing the specifications of basic computer skills (see attached photo. In this screen, the computer does not meet any entry.  He proceeds to beep 3 times, all the same length and height spaced about 30 seconds of gap. After the third beep, the screen goes black and then the computer starts normally with no other strange behavior.

  Without the GPU, none of these problems occur. At the very least, not regularly.

  I saw another thread mentioned that, while the HP support for my office page lists not her, there is an update of the BIOS for my motherboard which has fixed issues related to the GPU more modern. By nature it is an update of the BIOS that does not (seem to) officially support Windows 7, I am reluctant to go forward with this potential solution.

  Although I intend to build myself a new computer from scratch at a certain point, I was hoping to get at least another year out of this machine, if not 2.  While this question does not seem to be immediately threatening the stability of the computer, I can't help but think that it is a question should I go quickly to avoid future problems (not to mention it would save me a good amount of electricity to be able to enter the mode 'sleep' on a regular basis).

  Any suggestions would be greatly appreciated!

  

  Problem has been solved!

  For those of you who have trouble sleeping with the p7-1240 or computers with a card mother identical (MSI Jasmine Ms 7778 ver 1.0), I suggest that you follow this thread:

  http://h30434.www3.HP.com/T5/desktop-hardware/unable-to-boot-with-new-graphics-card/TD-p/3930544/highlight/true

  It is to use an update for your BIOS that is intended only for PC under Windows 8, but that seems to work perfectly well with Windows 7 PC. It solved my problems of sleep and makes the computer to behave at least semi normally while restarting.

  However, as indicated in the wire, an update of the BIOS should be a last resort because it can turn your machine into a very heavy and expensive paperweight if something does not work. Do not forget that you have the worm 1.0 card mother MSI Ms 7778 Jasmine and remember that you update the BIOS version 8.18.

  As I am looking for 2aeo on HP.com currently (according to the thread leading up to), I'm not find the same links I found last week when I went through the update. However, you can find elsewhere.