Strange behavior of 'Thin-thick' when there is an active Snapsot

Similar Questions

• The behaviors do not work when there is a previous div fixed on the same page?

  I have a still image at the beginning of the page.

  After that, I have a div with images in which I applied the swap image behavior, but the behavior does not work.

  If I change the positioning of my image, therefore, if this image is in the absolute position, by report o what either (unless it is fixed), the following divs show the swap image behavior.

  What is going on?

  I found it; is a z-index issue.

  Giving the div fixed negative z-index (-10), the behavior of the rest of the divs is working well.

  It just fit my original drawing at all, but it is not serious. There's a solution.

  Thank you all for your kind replies.

• Strange behavior of gray levels when the shadow is applied.

  I have a file with four images inside. One is RGB and three grayscale jpeg images. They all look good.

  Now, when I put a shadow effect on the images, the RGB image looks as expected. but the grayscale images all consider them lighter than before.

  I exported a PDF file of the two pages (I made a duplicate then a page in the shade and we do not) with a profile of PDF - X/1. All images in grayscale look more light, even the page without the shadow, which seems more dark in InDesign. The RGB image looks the same on both pages in the PDF file.

  Why the images to greyscale looks more light when a shadow is applied? Or, perhaps a better question is, why does the image without the eye of shadow down more dark? (The darker image looks more natural. I opened the images to grayscale in Photoshop and premiere the two Apple. Preview displays the image more dark most beautiful appearance, but Photoshop displays the images as being lighter, the way he looks in the exported PDF file.

  Any ideas?

  InDesign is not a grayscale working space. Instead, he puts in grayscale on the black plate unaltered data and displays using the current CMYK working profile. To have a precise idea of the behavior of the file you should activate preview overprinting.  I also trust with Photoshop and Acrobat much more overview.

• Firefox hangs when there is no active extension

  Firefox crashes since 13 and still crashes in 14.
  The only thing you need to do is open firefox and then wait it usually crashes in less than 30 years, sometimes it will not crash, but I do not know why.
  I have try to disable all extensions and activate them one by one, but I find that firefox crashes even when I click on "activate"(Nothing activated but when I click on it)

  bp-1059a80c-bfbe-4e06-b456-ea8422120729 2012/7/2911:58
  bp-8d3e025e-877a-41bf-81a7-fa6392120729 2012/7/2911:57
  bp-6cc3ea01-673f-4334-a0f0-5f4d42120729 2012/7/2911:56
  bp-6ed553c2-68c3-455e-baff-a4e322120729 2012/7/2911:56
  bp-54e6d82d-ca44-4fac-9f7a-be3972120729 2012/7/2911:48
  bp-a0f9cc23-da89-44fb-8767-68ceb2120729 2012/7/2911:48
  bp-d9138c37-dfc5-4e90-bee7-74cbf2120729 2012/7/2911:48
  bp-6a718d1d-50f7-4ade-9adc-d92e12120729 2012/7/2911:47
  bp-d7941d35-ed54-4ebd-a8b2-51f302120729 2012/7/2911:47
  bp-db48fd75-93b2-4462-9181-bebec2120729 2012/7/2911:46
  bp-2f013eac-0f20-41e7-948a-969fc2120729 2012/7/2911:35
  bp-53a099f4-9b95-4940-9230-60ff52120729 2012/7/2911:33

  I find what the problem is. If you enable sync extension in setting-> sync (which I activated recently in my PC and laptop, I believe that this is a new feature), then it would break. That's why my lab PC and laptop are broken everyday. I'm in China, so there may be some sort of internet block causing this bug. But the synchronization of other are fine.

• After installing Windows 7 Service Pack 1, system now hangs or crashes when there is internet activity

  Hello.

  I installed service pack 1 for windows 7, but since I did that he keeps to crush/freezing when it is a lot of internet activity... I have no idea how solve this problem. Help, please!

  * original title - crash/computer freeze windows 7 pack 1 service *.

  You could start by updating your network drivers. See how you go after it.

  MyPcHealth - free tools

• Lose the wireless internet connection when it is not active

  Hello
  I have an annoying problem. IM losing my connection wireless internet access after a few minutes is not active... Well not according to the 'doctor' program - it shows no signs of a problem.

  Looking at the 'LAN' icon, I see he's trying to connect when I ask, for example, an update on the current site, but simply not turn on the blue bar.

  The only cure to get online is to update the connection.

  What I'm doing wrong here?

  Thanks in advance... Jens

  Hello Jens

  Please check the option sign-out after x... on your router. The sign-out feature is used to disconnect the router from your ISP automatically when there is no activity for a certain period of time. For example, place a check mark next to this option and enter 5 in the minute field will cause the router to disconnect from the Internet after 5 minutes of no activity from the Internet. This option should be used if you pay for your Internet service by the minute.

  Good bye

• Issues coming out of "sleep mode" and strange behavior when restarting with GPU

  I use a desktop computer HP P7-1240 completely stock except for a GPU EVGA GeForce GTX 750 TI SC. The GPU works well when the computer is running (which is strange because the forums have several other discussions mentioning the 700 series must be incompatible with my BIOS).

  However, there are two main strange problems that have arisen since the installation of the GPU. One is that, every time that the computer enters mode "sleep", he refuses to wake back up correctly. It seems to me that the computer active but sends all the signals back panel (at the very least, no video because my monitors remain blank). On rare occasions, he wakes back correctly, but at least 90% of the time, it must be restarted. Upon reboot, the same problem sometimes (not), and the computer must be rebooted a second time until it will start again.

  This leads to the second problem. During startup, the computer goes to a black screen, listing the specifications of basic computer skills (see attached photo. In this screen, the computer does not meet any entry.  He proceeds to beep 3 times, all the same length and height spaced about 30 seconds of gap. After the third beep, the screen goes black and then the computer starts normally with no other strange behavior.

  Without the GPU, none of these problems occur. At the very least, not regularly.

  I saw another thread mentioned that, while the HP support for my office page lists not her, there is an update of the BIOS for my motherboard which has fixed issues related to the GPU more modern. By nature it is an update of the BIOS that does not (seem to) officially support Windows 7, I am reluctant to go forward with this potential solution.

  Although I intend to build myself a new computer from scratch at a certain point, I was hoping to get at least another year out of this machine, if not 2.  While this question does not seem to be immediately threatening the stability of the computer, I can't help but think that it is a question should I go quickly to avoid future problems (not to mention it would save me a good amount of electricity to be able to enter the mode 'sleep' on a regular basis).

  Any suggestions would be greatly appreciated!

  

  Problem has been solved!

  For those of you who have trouble sleeping with the p7-1240 or computers with a card mother identical (MSI Jasmine Ms 7778 ver 1.0), I suggest that you follow this thread:

  http://h30434.www3.HP.com/T5/desktop-hardware/unable-to-boot-with-new-graphics-card/TD-p/3930544/highlight/true

  It is to use an update for your BIOS that is intended only for PC under Windows 8, but that seems to work perfectly well with Windows 7 PC. It solved my problems of sleep and makes the computer to behave at least semi normally while restarting.

  However, as indicated in the wire, an update of the BIOS should be a last resort because it can turn your machine into a very heavy and expensive paperweight if something does not work. Do not forget that you have the worm 1.0 card mother MSI Ms 7778 Jasmine and remember that you update the BIOS version 8.18.

  As I am looking for 2aeo on HP.com currently (according to the thread leading up to), I'm not find the same links I found last week when I went through the update. However, you can find elsewhere.

• Strange behavior of TM2 recharge battery - only charges when almost dead

  Hi people,

  I have a new 2200 TM2T who exhibits some strange behavior of battery charge.  When plugged in, the battery will say "connected, charge", but the battery does not charge at all, no matter how much time he has left in (reported remaining level remains the same).  However, if I leave the battery discharged completely, it will start loading again, all the way up to 100%.

  It's a kind of weird automatic battery calibration or something?  I am hoping there is a way to solve this problem, because it's really annoying to not be able to keep busy all the time.

  Hi people,

  I just wanted to report on the resolution of my battery problem.  Returned the laptop to HP, and technical support has replaced the motherboard.  Works fine now.

• Java Fx: strange behavior when trying to write a vertical label

  I've noticed some strange behavior on the rotated texts (Label,...) in JavaFx...

  Originally, I just wanted to be able to display labels vertically in a GridPane. The first problem is that there is no simple way to indicate a label to display its content in one direction and given orientation. It would be nice to have something like the property on the side of the tabPane allowing to easily turn the text...

  In any case, I quit then myself to use the rotation function to turn my Label. It's when the strange thing began to happen... I put my label in a cell of the grid that is not large enough to display the full text if it is not turned, but the text must be able to adapt rotated once. The problem is that the text appears wrapped even when it is turned as if packaging test have been done until the text is actually shot... The problem can be seen on this screenshot http://hpics.li/e210f2f : the text to be displayed is written in the ToolTip and we can see that only the first letter of the rotated text is displayed in the grid of the cell even if there is more than enough space to display all...

  Anyone has an idea on how to solve this? Is this the intended behavior or it's just a small bug?

  Thanks in advance for your answers.

  Another workaround solution seems to be to wrap the labels into groups and spin groups. If you don't have enough space in the grid, although bad things happen.

  import javafx.application.Application;
  import javafx.scene.Group;
  import javafx.scene.Scene;
  import javafx.scene.control.Control;
  import javafx.scene.control.Label;
  import javafx.scene.layout.GridPane;
  import javafx.scene.layout.RowConstraints;
  import javafx.stage.Stage;
  
  public class RotatedLabelsInGrid extends Application {
  
    @Override
    public void start(Stage primaryStage) {
       final GridPane root = new GridPane();
       root.setHgap(5);
       root.setVgap(5);
  
       final String letters = "ABCDEF" ;
       final int numRows = 4  ;
  
       for (int col = 0; col < letters.length(); col++) {
           for (int row = 1; row <= numRows; row++) {
               Label label = new Label("Item "+letters.substring(col, col+1)+row);
               Group group = new Group();
               group.getChildren().add(label);
               group.setRotate(90);
               root.add(group, col, row-1);
           }
       }
  
       final RowConstraints rowConstraints = new RowConstraints(100, Control.USE_COMPUTED_SIZE, 200);
       for (int i=0; i		   

• 2.1 RC1 - strange behavior when you change the data in the table

  I recently found a new strange behavior of the SQL Developer. On a small table or a table with a filter where all the data is loaded, but not all lines can be displayed on the screen, trying to change the data in the table. When I confirm the editing with the key enter, Developer SQL jumps always until the end of the data. Quite confusing and boring. The cursor seems to remain in the field that I have edited, then moving upward or downward line force SQL developer to this line.
  
  Appears not to be the case when all the data are loaded instead of punch, but if you force Developer SQL to load all the data, I can reproduce this strange behavior.
  
  Sven

  Bug 9205959 is fixed.

  -Rambeau

• When the query returns no data, I get a strange behavior

  Hi all!
  
  I use jDev 11.1.2.1.0
  
  I've implemented a .jspx a read-only table with a query at the top. The user can press the 'new' button and a popup with an editable form appears in the order the user to insert a new record.
  The user can press "ok" in the dialog box and the record is validated, or press 'cancel' and the restore operation is executed. Which is more or less all the features of the form.
  
  I have the following problem.
  If I have a query in a way so that no record is returned (so read only table is empty) and press the 'new' button, the validation of the VO are enabled in the form (that is, all the required fields are red). If I press cancel, the restore operation is performed, but there is a blank line in the table ready only. The user does not see the postings at this time, neither the blank line. BTY, if I try to delete this empty line, I 25039-Houston: RowNotFoundException, which makes sense, since there is no current record should be deleted. On re - interview, he disappears.
  
  This problem occurs only when there is no trace at all in the table.
  
  I can't understand...
  Any suggestions? Any clue?
  
  Thank you very much
  ~ apostolos

  In the popupCanceledListener have you tried to do a PPR manually using (.addPartialTarget) AdfFacesContext.getCurrentInstance ()?

  Thank you
  TK

• Has anyone ever met a strange behavior layer blend modes?

  I use a little photoshop for retouching and photo compositing. Tonight, I met a strange problem. I tried create a vintage photo look and had a number of adjustment layers, including a curves, levels, fill color and there was also that some layers of texture and noise all the value of the different opacities. To the top of all of this I had a layer of tile that was black on the edges and white in the Center, on the mode of multiplication of mixture. Well, when I was clicking on and turned off, I realize that this layer of the tile was certainly lighten the central part of the whole image a little (the part which is white on the layer of the tile), almost like a screen. So I hit the thumbnail by different modes of opacity layer and saw that there was no change in his behavior, each mode has screening white, darker color and multiply. I thought that perhaps he was interacting in a weird way with an other diapers so I have not disabled all the others except the back ground - still no change. Then I dropped the layer to the bottom of the after another until it was less than the background. When I started back up again, he behaved normally for a while until that I moved it to the top of some levels in the stacking order, and then he returned to the behavior of the screen. Anyway, I mixed it autour a bit but there was no thick when it would appear correct opacity and when he wouldn't, so it doesn't seem to be any specific layer interaction. I don't know, but I don't see really no case where white multiply together should produce a lighter result even if it were interacting with a different opacity. In any case it seems to me that there is something to do with the overall calculation of the opacities. I tried to create a new layer black and white and it was also do the same, strange behavior and do not correct opacity.

  I'm tired, so I'm going to bed. I'll turn off the computer and hope it goes further when I reboot, but if it isn't, doesn't that sound familiar to anyone? I'm not a regular visitor to this forum, but I thought I'd put it out there in case someone else has experienced something like this. I did that 5 gigabytes of ram on this computer and I worked there for a while... maybe that photoshop could not keep just up (?) I use Photoshop CS5, space colorimetric RGB Adobe 1998.  I never had something like this happen in the past eleven years, I've been using photoshop. Hmmm... hope I don't have to reinstall or call support or worse. I cross my fingers.

  The layer is in a group of layers have an other than to pass through blending Mode?

• Strange behavior with the function «Help in command line»

  So I do a little playing with the opening of the files compiled help (.chm) with the command-line help feature, and I saw a strange behavior when trying to index multi-level access keywords. According to the documentation, if you set the 'Key' operation, you can enter a value for ' string to search for "to access this section. The more precise help that:

  If this string contains a keyword index, the string must match the key of the index as it appears in the help index file. To access a topic with a multilevel index keyword, enter the keyword of the top-level index, a colon and the keyword of the second level index. Do not separate the elements with spaces. For example, a chain of error codes: GPIB jumps about a subject with a keyword of top-level index of error codes and a second level keyword index of GPIB.

  All right, seems simple enough. Except that when I tried, I couldn't work, even with the example provided. I tried the following simple test:

  

  Opens the help file, but it opens to this page, not to the page ' error codes: GPIB "non-descript. I saw this in 8.2 and 8.6. Anyone have any success with access to a multi-level keyword?

  Note - side

  Curiously, the Index for the help lvconcepts.chm file looks like this:

  

  In other words, the input index text is just "GPIB", but the text that appears in the keyword field is "codes error, GPIB. I'm curious to know how this was accomplished. I decompiled the lvconcepts.chm file and watched the .hhk file, and it is not immediately obvious to me. (By the way, if you try to use "error codes, GPIB" it does not either).

  Hello

  Please contact National Instruments!
  It is a very strange behavior.  I tested out and seen the exact
  same results you are experiencing.  This was reported to R & D (AUTO ID # 130246) for further investigations.
  From what I can tell the a possible workaround solution that we have documented
  in the post of root Canal.  I can't continue to look into this in order
  to see if there is no other workaround solution or a reason why it is
  run in this way.  Thanks much for the feedback!  If
  you have any other questions on this subject please post them here.
  Have a great day!

• Strange behavior file open/create/replace

  Hi all

  I will make my question as broad as possible because I think someone must have met this behavior before. I use the function open/create/replace file to programmatically open a file, giving a path entry created in an earlier vi. Strange behavior, I see, is that although Labview returns 1 error when I give my file programmatically, it reads the file OK if I give as a constant. The constant path that I give is exactly the same as one I am tryinng to programmatically.

  Any suggestions? Is it to do with a string formatting problem? I enclose my portion of treated VI the path_in section.

  Thanks for your time,

  Kind regards

  Harry

  Wild guess: you must use 'build path' instead of 'concatenate strings' build path.

  (Also use a constant of diagram of the path (not a string!) to "c:\ni-rt\" and get rid of the "trim whitespace' and the 'chain of path")

  See if that makes a difference. (build path is OS independent, while the operations of independent channels are not).

  Never use the paths as strings. There are very few cases where this would be appropriate.

• HP Pavilion Slimline s5304y strange behavior and stops randomly

  To start, here is my card:

  HP Pavilion Slimline s5304y

  Windows 7 Home Premium 64 - bit SP1 Build 7601

  AMD Athlon II X processor 2 215

  4 GB of RAM, blah blah blah

  Here are the symptoms:

  -Win7 starts to act strangely, when the keys are depressed they'll keep recording (like that, but forever)

  -Then it will attempt to force the closure but I keep open Word 2007, which will block the closure and I gives me the option to cancel or to force stop word.

  -J' I usually Cancel to see what it does, sometimes it continues to operate normally, sometimes, attempts to stop become more frequent until it ask no more, and Word cannot veto the shutdown request.

  -When I look at the Event Viewer system, he says he is told what USER (me) has launched the stop, as if it were normal.

  -A little more digging in the event viewer application section says that before stopping, "HP Support Assistant Service" had a "PowerEvent handled successfully by the service" with EventRecordID of 10883.

  -Meet system Event ID 109

  Microsoft-Windows-Kernel-Power

  EventRecordID 45150

  -Meet

  "The process C:\Windows\System32\winlogon.exe (USER) has launched the power off computer USER for the user NT AUTHORITY\SYSTEM account for the following reason: no title for this reason could be found.

  Reason code: 0x500ff

  Type of closure: power off

  EventID: 1074

  [Qualification] 32768

  There is no indication that something went WRONG minidump, no discharges of any sort, sfc/scannow ran own just like chkdsk, memtest, tester of windows 7 and all other diagnostic tools.

  He did it before, but very rarely, so I thought nothing of it (which happened in the spans of the months apart) but now happened several times a day.

  Recent software additions:

  Installing the software and drivers Lexmark Prospect Pro205

  -Updated Nvidia graphics drivers Geforce 6150SE nForce 430 to 8.17.12.9573 and it's Helper service ver 295,73

  What I did to try to rectify the situation:

  -Scanned with each virus/malware free scan in existence - deleted an infected file from Java Java/CVE-2011-3544. O operate. And another unrelated to the advertising program.

  -Updated HP Assistant and Advisor

  -Updated several times with various updates for windows 7

  -Clean the case thought it was overheating, but nope - clean as a whistle, normal running time

  -Good fans checked

  -Extract from food - looked good, constant voltage

  I haven't checked the power extension cables. I heard there is a problem with shorting out on the 24-pin extensions, but I didn't have an extension of 24 pins on the power cables.

  I've heard others have had problems with HP stopping randomly with a strange behavior, so I wanted to see what you guys have to say.

  Could this be problems of power with my house? The wiring is old... Or more likely is a short circuit in the cable/PSU?

  How can I easily repair/test of this theory?

  -All right, so the system restore has nothing but destroy some files, because I couldn't not correctly backup the drive between the random stops.

  However, I found the solution to my problem, that you won't believe.

  Short answer: I replaced the stock HP keyboard (model KU-0841) who seems to have been short.

  The long answer:

  -When the computer kept shutting down even in safe mode after a destructive recovery, I started watching again material.

  -Noticed my typing would sometimes record, sometimes just go crazzzzzzzzzzzzzzzzzzzzzzzzzzzy (like this).

  -Then comes the keyboard no longer works. Thus, while the veto stops with WORD 2007 and using the keyboard on the screen in Win7, I thought it was a terrible virus - it wasn't.

  -When I unplugged the USB keyboard it's a strange electric 'bzz' sound, like what you hear when static is unloaded. It turns out that the USB port has been be short-circuited by the keyboard.

  On the keyboard and the USB plug was going well, so I don't know who is to blame again, however - if someone is having the same weird problems with events of the power of the nucleus and 1074 with 0x500ff errors-try to check your hardware.

  After replacing the keyboard, everything works perfectly.