Strange editor behavior of virtual network after updating to Windows 7

Similar Questions

• HP Color LaserJet MFP M176 Pro: No printing on HP Color LaserJet MFP M176 Pro after update of Windows 10 anniversary update

  My HP Color LaserJet Pro MFP M176 does not print after update of Windows 10 anniversary update. I've updated two computers (HP Compaq Elite SFF 8300 and E6320 Dell), Hp with 2013 installed Office and Dell with Office 2010 installed. The printer is connected to my network. The latest "complete solution drivers' HP was installed before the upgrade. Printer does not printer-> Printtest properties, error notification appears and asks me if I want to troubleshoot the error. I can see the printjob in the spooler, but it is immediately deleted. Does not print any programs I've tried, with the exception of the notebook HP Print and Scan Doctor! When I troubleshoot with Windows printtroubleshooter, no problems found. Same thing with HP print and scan the doctor.

  I uninstalled all the drivers and the Hp programs, rebooted and installed "drivers complete solution." Same problem!

  On the Dell computer, I made a new clean install of Windows 10 Anniversery update, from a USB key. Office 2010 installed and 'full pilot solution again'. Same problem!

  On August 18, 2016, I found new drivers on Hp. new downloaded web pages "complete solution drivers still" uninstalled all the drivers and the Hp programs, rebooted and installed "drivers complete solution." Same problem!

  Among the many solutions, I tried turning the firewall. No help.

  I know that brother Corp has sent an email to their customers, there are big problems with their printers/drivers and the anniversary 10 Windows Update. Same problem with Hp printers/drivers?

  Someone who has a solution?

  Hello!

  Thanks for your suggestion of a solution!

  First of all, it fixed my problem of printing when I tried with a new user on both computers. Yet, I was a little confused that two updates and an installstion clean "updated anniversary" should lead to a curropted user profile!

  Then when I did what I always be with new computers/users, to the environment variables 'TMP' and 'TEMP' C:\Temp for the new user. Printing stops again. Extract a little more and found that users on C:\Temp needed to be 'total control '. 'Change' was not enough. Perhaps one of the new things in birthday update?

  In any case, there where the pleasure with your help!

• ASUS laptop computer: touch screen does not work after update of windows 10

  My touch screen does not work after update of windows 10 in Chrome. How can I fix it?

  Hello

  Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.

  Kind regards.

• HP Pavilion TouchSmart 14-n013: touch not working after updates on Windows

  Hello

  My touch screen stopped working after updates of Windows on my laptop froze. I went through all the parameters of the pen and touch, and others to resolve this issue, and unfortunately it still does not. I also rebooted the laptop to factory settings and update all the necessary things in the software updated and updates on the HP site recommended and I've updated the BIOS, but still the touch screen does not work.

  I hope you can help.

  Thank you

  According to the message that you have recently published, I want to confirm that this could be a hardware problem and I highly recommend to Contact HP immediately technical support by phone for further assistance immediately to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• USB mouse does not not after update. Windows detects that usb is connected

  after update to windows 8 my usb mouse stopped working drivers are up to date and clean. tried turning off then turning, resettlement, but nothing does. After a few minutes that its connected it also plays the "detected usb device" then removed "usb device" ringtone It can be connected to my problem.

  Hello

  Thanks for the info and sorry for the late reply.

  I suggest you to run the Microsoft fixit and see if it helps:

  Diagnose and automatically fix the Windows USB problems

  http://support.Microsoft.com/mats/Windows_USB_diagnostics

  Please reply with the results, in order to help you solve the problem.

  Thank you

• will I get support for HP after update of windows 8?

  I want to upgrade to window 8 (64-bit) Windows 7 (64-bit), will get assistance from HP after update of windows 8?

  Hello

  Please see the following article:

  http://support.HP.com/us-en/document/c03451712

  Kind regards.

• Increase in the size of the virtual disk after update comments

  Hello

  I'll put up a basic using Fedora 11 virtual machine. I installed it with the installer in text mode to get a basic system with a small footprint. Once installation is complete, the size of the folder for the virtual machine is 564 MB. After you have installed a few programs (presto, nano) and run yum update, the size of the folder double almost to .97GB when the virtual machine is shut down. There is no snapshot on each machine. Disk settings are a single virtual disk of 8 GB, 2 GB split, not preallocated. The OS is Vista Business 32-bit. VMware Workstation is 6.5.3 Build 185404.

  What is all that extra space? I tried the yum and several options reset but no luck. I ran - x - m - max-depth = 1 / in computers with the following results:

  On the virtual machine without Update:

  0/dev

  10/var

  1/Media

  1/home

  1 / opt

  1/boot

  6 "/ bin"

  0/proc

  14/etc

  72/lib

  1 /srv

  0/sys

  310/usr

  1/MNT

  0 /selinux

  1 / lost + found

  11/sbin

  1/root

  1/tmp

  421.

  The virtual machine with updates:

  0/dev

  14/var

  1/Media

  1/home

  1 / opt

  1/boot

  6 "/ bin"

  0/proc

  15/etc

  126/lib

  1 /srv

  0/sys

  314/usr

  1/MNT

  0 /selinux

  1 / lost + found

  11/sbin

  1/root

  1/tmp

  484.

  From there, everything looks normal without any increase in the brightness of the use of the disc between the virtual machines.

  Here is what the comments files look like:

  Free update:

  555,483,136 Fedora11_TM - s001.vmdk

  33,882,112 Fedora11_TM - s002.vmdk

  393 216 Fedora11_TM - s003.vmdk

  2 424 832 Fedora11_TM - s004.vmdk

  65 536 Fedora11_TM - s005.vmdk

  8 684 Fedora11_TM.nvram

  607 Fedora11_TM.vmdk

  0 Fedora11_TM.vmsd

  2 099 Fedora11_TM.vmx

  266 Fedora11_TM.vmxf

  74 448 vmware - 0.log

  95 278 vmware - 1.log

  68 005 vmware.log

  With updates:

  1,001,127,936 Fedora11_TM - s001.vmdk

  47,710,208 Fedora11_TM - s002.vmdk

  393 216 Fedora11_TM - s003.vmdk

  2 818 048 Fedora11_TM - s004.vmdk

  65 536 Fedora11_TM - s005.vmdk

  8 684 Fedora11_TM.nvram

  607 Fedora11_TM.vmdk

  0 Fedora11_TM.vmsd

  2 099 Fedora11_TM.vmx

  266 Fedora11_TM.vmxf

  68 109 vmware - 0.log

  68 265 vmware - 1.log

  68 172 vmware - 2.log

  72 328 vmware.log

  This something that escapes me that would cause this increase in space?

  Thank you.

  When you don't have vmware tools installed vmware-vdiskmanager shrink is indeed very.

  You first need to wipe unused space with zeros.

  If DD \u003d/dev/zero of = 0bits bs = # 20971520 bs = 20 m rm 0bits

  The two commands will create a such wiperfile.

  You must run these commands for every single partition that you use.

  When done turn off the virtual machine and run vmware-vdiskmanager with option to shrink again.

  This time, it will be more efficient

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• My laptop cannot detect wireless networks after using the Windows Update service. Technical support, very desperate need.

  I tried the direct technical support, but it seemed to have cut. Given that I can no longer connect to the internet on my laptop, I'm with my playstation browser and painfully by typing with the controller.

  My probllem.
  I have an ASUS Intel Core i3 - 2350M CPU @ 2.30 GHZ running Windows 7 home premium. I've selected "Windows Update" in the start menu and proceeded to download and install all updates. Once the updates have been installed, my laptop couldn't detect wireless networks which means that I can't connect to my router and have lost the internet.
  Device Manager indicates 802.11n Wireless LAN Card is working properly.
  Windows did create a restore point before installing the updates, but everytime I try a restore I get the following message
  "System Restore has failed. Your computer's system files and settings were not changed
  Details
  System Restore could not access a file. This is probably because an antivirus program is running on the computer. Temporarily disable your antivirus program and restart System Restore.
  An unspecified error occurred during the restoration of the system (0x80070005)"
  "I disabled anti Virus AVG and COMODO firewall only to receive the same message, and it now appears that the restore point disappeared as if by magic, saying system restore ' no. restore points were created.
  Updating installed Windows the following
  Microsoft .NET Framework 4.5 1 4.5.50938
  Microsoft Office Home and Business 2010...
  Service Pack 2 for Microsoft Office 2010...
  Microsoft driver (keyboard) 21/04/2009
  Microsoft driver (mouse) 21/04/2009
  Driver Microsoft (System) of 21/06/2009...
  Microsoft driver (System) 21/06/2006
  Driver Microsoft (System) of 21/06/2006...
  RALink Technology, Corp. (Net) 02/04/2013 pilot
  Update for Microsoft Windows
  Update for
  Update for
  Well when the restore point was present he says that these things will be deleted that's where I got the list, but as I said the restoration failed and disappeared.
  I have reset my router but my laptop doesn't detect a network and there are usually 10 in the region and it shows nothing. My router is fine, as I use it now with my playstation.
  Please I really need help, how do I get my laptop to detect the wireless network. If someone could give me a few steps to do, please.

  Most laptops have a switch that turns the wifi radio on or off.  Often, it is a combination of the Fn key and one of the F keys.  It may be a physical switch somewhere on the laptop.  See your manual for details.

  If this isn't the problem...

  What is the brand and model of your router?  Almost all wifi routers also have at least one Ethernet port, you can connect your computer to the router with an Ethernet cable and download the right driver for your http://www.asus.com/support wireless card
  Have you tried to "Roll back driver" in the "Driver" tab of your adapter wifi 'properties' in Device Manager?  At the very least, determine which version of the driver is installed, and compare that to the current version on the asus support site.

• OfficeJet 4500 G510g: software HP does not work after update recent Windows 8.1

  It is one of the three HP OfficeJet printers, which essentially has the same problem.

  This printer has been in service under window 8 and 8.1 of Windows (and before that, with Windows 7 and Windows XP) and fully functional (even if I only used print and scan with this printer), it is connected by Ethernet to my local network.

  After the recent updates of my system (I've enabled Windows update to automatically install all Important and recommended updates) the HP Solution Center are more recognized this printer.  My first action was to remove the device (using the control panel:connected and printers) and then attempted to add a printer.  Windows adds that a printer has failed.

  My second attempt was trying to add a device.  While that * fact * seem to succeed, the specific printer icon has been replaced by a generic printer icon and control panel:Director something did * not * show the printer in the list of devices!  She has shown a print to the printer queue, however.  HP Solution Center did not always recognize the printer.

  For my third attempt, I went to the HP support site and downloaded all of the following: OJ_AIO_4500_G510g-m_Full_Win_WW_140_408, printing HP and doctor Scan, the diagnosis of HP network and user HP printer Installation Wizard.  Using the full installation package, I uninstalled just the specific printer software first (leaving the solutions, digital imaging and other software in place - they are all used by my other printers as well) then tried to reinstall all the software installation package specific printer could not conclude, as he could not find the printer on my local network!

  Then I ran the Diagnostics of network user and found the 4500 (and a 6000, but not my 6300!  I had not yet done any changes to the installation of the 6300!)  The recommended action is to download the full installation package and run it.  Even if I had downloaded manually, I leave Network Diagnostics continue - download failed before finishing.

  Then I tried printing and Scan Doctor, who took nearly three minutes to tell me that the 4500 was not connected to my network.

  I then used the web server integrated for the printer by opening a browser directly session by its IP address.  The printer is online and processed as expected, but Windows still does bllind to it.

  I then tried installing printer Assistant, but she missed like printing and Scan of the doctor.

  Frustrated, I have re-directed the full installer, but this time after selecting the uninstall, I let him remove all HP software, knowing that I would then need to reinstall all three printers.  I downloaded the full package for my OfficeJet 6310xi and my OfficeJet 6000 - E609a (after checking that all three were supported by HP for use under Windows 8 and 8.1)

  Then I started the resettlement for all three printers procedure, starting with the 6300.  This facility has failed after leaving an Add-a-device shortcut on the desktop.  I tried to use the shortcut to add the printer, but he did not better than my first attempt

  Then I tried with the 4500 and 6000.  Even failure for each of them.

  I uninstalled all three printers, but became suspicious of something else than an obsolete installation package (even if I had downloaded the latest versions on the HP support site!)

  I made one more attempt to install the 4500 - after uninstalling just - and this time he only gave me the option of installing additional software!  Something had clearly been left (probably in the registry) the installation program takes to mean the printer was already installed!  So I canceled the installation attempt and decided to look a little deeper for the remains of pieces of attempts and prinior facilities.

  A search with the found registry editor a few each printer detritus left behind in the registry and search for foud Program Files, a large number of files related to the printers.  I was quite impressed by for each printer uninstall programs!

  In particular, in the SYSTEM ROOT and sections registry have been entered for the Olympic GAMES of 4500 and 6000 JO under the subsections MULTIFUNCTION.  Even administrators system to a Windows system cannot usually change permissions to delete these entries, I left those alone, but I wonder if this is what prevents the installation program to install the printing software.

  It is not only the installation and HP software support which is defective after the recent updates of Windows.  Such widely used and stable programs like Firefox, Thunderbird, and even Windows Explorer has been updated unexplainable in their behavior.

  I am desperate to get my printers fully functional again!  I strongly suspect a compatibility issue, but I really need advice here!

  -Barr

  Thanks again for this detailed information. If you feel my post has solved your problem, could you mark accept as a solution, because it will help others find the solution. Thank you.

• OfficeJet 5745: Cannot print after update of Windows 10

  I've updated to Windows 10 and now have problems printing.  Help!  I've done all the troubleshooting, coil status stuff!  I'm used to be able to print from the internet, scanning to my computer or email and print wireless from my phone.  I now can not print anything!  I tried to install Windows updates.  Should what printer I configure default network or regular?  Use the printer pdf microsoft thing?  I am desperate... saved my bank statement online (pdf) to my documents and it would not print the Bank or my documents!  Before this I had problems after that my hard drive crashed and I got a new hard drive.   When my hard drive crashed I was using WINDOWS 10 and everything on the big printer worked; they sent back with new hard drive on windows 8.1 and I had I thought that the upgradew would solve the questions.   I could print and scan but no wireless for my phone on the new HDD in windows 8.1 and upgrade to 10 thought would solve my problems, but now it's worse... Help!

  Hi @savra,

  If your computer is connected to the printer on a wireless network, you do not want to send print jobs to the network printer.

  Here is a support document to help with printer after Windows 10 upgrade problems - after Windows 10 Upgrade, printer problems occur.

  Aside to make sure Windows updates are up to date, there are a few other updates that can help with printing.

  Microsoft has released an update that is supposed to help with wireless printing - Cumulative Update for Windows 10.

  There was also an update for Adobe Flash Player in Internet Explorer and Microsoft Edge who can help get this impression of your bank's site - Update for Adobe Flash Player.

  Please let me know how it goes.

  If this helps you find a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• problems with ftp after update of windows 7 and windows xp

  After updates windows 7 and windows xp (updated April 10, 2014) my computers give different errors with FTP, Explorer Windows and FileZilla transfer.
  In windows 7 is resolved by uninstalling the updates. In Xp, no.
  Any idea?

  See the thread below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/this-FTP-site-cannot-be-viewed-in-Windows-Explorer/e699d41e-98ae-48c1-9231-d570d46c0f38

• WiFi does not work after update of windows (Windows 8)

  Last night, updated my (laptop) windows and when turn it on this morning the wifi no longer works. Ive tried many things; Uninstalling the drivers, reinstall, reset the default bios settings, back up the updated driver, updating the computer, etc.. I have no idea what to do here. Before updating the system, I got windows 8.1 but now she's back to windows 8 after the update. Help, please. The only option I can think of right now is updated the bios but I'm scared to do it properly. Here are some of my information system:

  Windows 8

  64-bit operating system

  model - gateway NV52L 15u

  BIOS - gateway V 2.02

  Broadcom 802.11n network adapter

  Very well! I finally thought to it. Some how by starting it through safe mode, and then try to connect to the internet, and then restart normal medium - it woke my computer since his funk. This is the guide I used http://kb.eset.com/esetkb/index?page=content&id=SOLN2268 and as a tip for all the world, make sure and create restore points! In addition, often updates of windows disable the wifi, I found this to be a common problem with a lot of people

• Problems after updating to Windows 8

  I had some problems with my new laptop so I decided to try the «Refresh your PC» function Doing so brought on a slew of new problems which I had no chance to solve on my own. I hope someone knows what to do with this mess.

  After "refreshing" to my PC, my laptop wouldn't let me:
  Install anything (downloads are OK, though)
  Programs open (with the exception of Internet Explorer)
  Applications open
  Open C: /.
  Open the laptop settings
  Solve problems ("an error has occurred during troubleshooting.")

  It became obvious to me that the majority of these problems were because the updating of Windows me rid of my administrative privileges.

  I tried to solve this problem with every idea that I had and every suggestion I could find online. The problem is that my phone won't allow me to do anything to capture administrative privileges.

  Here are the solutions I tried:
  'Change the Type of account' in the user accounts: parameters show that I am already administrator.  The 'Standard' option is greyed out. Nothing to do here.

  Using a command prompt: everything I try, I get the "Network Error" result... "Windows cannot access to ' if I get" net user administrator / Active: Yes "I received the reply"the system 5 error has occurred. Access is denied. "I can only assume this error occurs because I'm not an administrator. If I try to do "sfc/scannow" it says "You must be an administrator." However it won't let me run cmd as administrator.

  Exchange User Account Control: the bar is set on "notify me only when...". ». I can drag down to "Never notify", but when I try to click on 'OK' will not just pass by. I could click OK all day and nothing will happen. No error message.
  Create a new user: hit this button head to PC settings, which does not, as previously stated.
  Clean boot: Msconfig will not open, I get the error message "network error". Windows cannot access.
  Switch to the Microsoft account: 'Users' directs 'PC settings", which is an application that does not open.
  CHKDSK: whatever it is, I have no idea, but it does not open.

  If I try to "Run as Administrator" on any program, it simply doesn't. No error message.

  I reached the end of my rope after trying several solutions more that hasn't worked and tried to do a system restore. System Restore does not open. I get the error message "System Restore could not start." I would try to solve the problems, but as I said troubleshooting will not, work almost everything also, runs to the PC settings application, which does not open.

  None of these problems existed before I did the update of Windows, so I can only assume what caused their - which is a little disconcerting.

  Any ideas on what to do?

  I had this problem after that refreshing of my pc, if yours is the same (if it could even be your best solution) you will need to make a new account

  Windows + x

  go to "Control Panel".

  go to "user accounts and family safety."

  Press 'user account '.

  Press 'manage other accounts '.

  In light blue shades near the bottom, it says "add a new user".

  Follow all instructions after that to make your new account

  Sorry I couldn't be more helpful. If all else fails, it's the only way I know how to deal with it

  E-mail address is removed from the privacy *.

• WiFi signal is completely lost after update of Windows 8

  Hello

  My new Asus PC with Windows 8 and wifi works well until I did update of windows, after updating my wifi signal was completely gone, I made the sentence that tells me that my internet cable is not connected, he sees not my wifi in all more than shooting.

  I reset my computer and wifi still works, however, I am very concerned to make the necessary update yet as I need internet and I can't afford to keep downloading updates on and more.

  I'm not familiar with windows, as I've been with apple over the years, please help with this problem because I am completely at a loss as what to do next.

  I look forward eagerly for your help with my problem.

  Thank you

  I had this same problem. I have a PC HP, but the solution for yours should be similar. I downloaded the form from their Web site Intel wireless driver update, and it solved my problem.

  Here's what I did:

  1. Forehand app, open the 'search '.
  2. Select 'Settings' as the place of your search
  3. Search for 'Pilot' (without the quotes)
  4. Click on "Update device drivers"
  5. Scroll down to "network adapters."
  6. See if there is a Intel. Mine is called "Intel Centrino Wireless-N 2230 #2. Want to know what it's called.
  7. Google search (on another computer, or use a network cable to attach your PC physically) for all that your card has been called. I searched "intel centrino wireless-n 2230.
  8. Click on the result of intel.com. He expected to be the first, but it's the one you want.
  9. You will be at the product page. There is a bar on the side with a link called 'Information of Support' in there. Click on that.
  10. Click on "Intel PROSet Wireless software and drivers for Windows 8"
  11. There should be a bunch of links to download the software. You want the number of bits that correspond to your system. (32 bit systems / x 86 get the 32-bit software, 64 bits of the system gets 64-bit software)
  12. Once downloaded, run the software. If you have downloaded the driver on another computer, you need to transfer via on a USB stick or something before you install it.
  13. The software should do its thing and then ask to reboot. Do it.
  14. You should be good to go. Good luck, and I hope it helps.

• HP envy 15 notebook PC: Beats audio not available after update of windows 10

  Hi, I would like to know the characteristic audio Beats that isn't on my laptop anymore, after I've updated for Windows 10 he disappeared and now the audio on the laptop is not the same of course. The quality is worse.

  How can I get it back?

  Thank you

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63408.exe

  When the reinstallation of Chipset has completed, restart the laptop.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  When he finished, restart the computer again and let windows to load completely for a few minutes before checking it in.

  Kind regards

  DP - K