Strange screen on Satellite L300 problem

Similar Questions

• Need information on screen on Satellite L300-255

  Dear Sir
  I want to know how the laptop screen Toshiba Satellite L300-255 and the dish.
  Thank you

  Hello

  All Toshiba laptop parts can be ordered from your countries local Toshiba ASP.
  You can also buy a LCD for the L300 with certain 3rd party suppliers.
  Satellite L300-255 takes to load a screen 15.4 wxga (1280 x 800) and there are a lot of offers in the price of the internet from 120 (2nd part of the hand).
  New part might be a bit expensive

• Recovery with Satellite L300 problem

  I have a problem trying to restore my laptop Toshiba Satellite L300 to factory settings back!

  OK so basically, my laptop Toshiba Satellite screwed up and I even turn the thing!
  After a while, I was able to 'Restore factory settings' and then after typing my name and my Pc name etc., and after the latter had analyzed what it scans, it says "step 2: finish Prcoess Installation may take several minutes.» Do not interrupt or stop ' or or whatever it says...

  Anyway, I don't know, but it seems to be stuck on this screen! I left it for like 30/40 minutes and it always did, so I turned it off by the button. Now when I turn it on, I can't do anything until there finishes this installation, but when I try to leave it, it doesn't do anything!

  Help, please!

  Additional details
  I don't have a recovery disc! I restore or retrieve or another of the original on the HARD drive when you press F8 at startup to the top

  Any help appreciated

  Thank you, Andy

  Post edited by: ADMIN

  Hello Andy

  Unfortunately there is not some sort of magic bullet. A recovery facility works or not and there is no way to make it work somehow.

  What you can do is to start the installation of recovery even once, if possible. Please do so and send feedback.

  To be honest I don t understand why you didn't create Toshiba Recovery DVD s advice. If something goes wrong with the HARD drive or HARD drive recovery image can not be used you will be able to use recovery DVD for installing the OS.

• Satellite L300: problems trying to get the CD player work

  Currently, I have a Satellite L300 unit and have problems trying to get my CD drive work.

  Recently, I deleted the cd player, completely by chance instead of a printer.
  Now it won't reinstall and no update driver makes no difference.
  Anyone have any ideas?

  First of all, try to restore Windows back to a Restore Point prior to a date before the problem occurred. System Restore is in the start menu-> programs-> Accessories-> system tools

  Then try to remove the CD/DVD filters in the registry, and then restart. Windows should find the CD Player automatically, unless the registry has been messed up.

  When the associated CD/DVD (such as iTunes, Nero, virtual CD software), the software is installed, they install filters in the registry, which can cause compatibility problems.

  (1) run Regedit (start-> Run-> Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).

• Registry Satellite L300 problems

  Hello!

  I just bought a laptop Toshiba Satellite L300 CE over 22 months and when I came home I tried to save him but I couldn't.
  So I waited a while because I thought that maybe some technical problems but I cant save it yet.

  IE is already recorded, but next to the said Standard warranty registration is not final.

  What can I do? Thank you!

  Hello

  If you have a European model for Toshiba laptop you can use this page to Toshiba in order to register the warranty:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/services_standard_warranty_eu/

  You can also check this page for information on the warranty for your laptop model:
  http://www.toshiba-tro.de/unitdetails

• Satellite L300: Problem with webcam

  Hello. Sorry for my English. I have a laptop Toshiba Satellite L300-w15
  I have a problem with the webcam. Tried tons of different drivers. Official drivers from this web site, drivers by number of VID/PID... nothing helps. I think that someone has tried to change firmware on webcam and set bad firmware. Can you tell what webcam is installed on this laptop? Chicony? What model? Now, the web cam code is: USB\VID_0C45 & PID_62C0 & MI_00\6 & B22C026 & 1 0000
  Search by this code, I realized it's webcam from another laptop, Toshiba l300... you can what can I do? Can I change firmware to normal? Where can I take it? For what sex cam should look for firmware...

  Windows xp. tried to reinstall windows... nothing has changed

  Can you please install original OS that you got with your laptop and check the webcam feature?
  Or you got this cam without pre-installed software?
  > I think someone tried to change firmware on webcam and set the bad firmware
  As far as I know Toshiba doesn't offer any firmware for cam, just pilot and Toshiba webcam application. No more than that.

  What operating system do you use?
  You have installed and configured? I ask this question because I don't understand how someone can have access to your laptop?

• Re: Satellite L300 - problems after installing Windows 7

  Hello

  I have a Toshiba Satellite L300 bought with Windows Vista 32 bit about 4 months later, I got my Windows 7 64 bit done.

  1 my laptop has startup problems after I installed the drivers give him additional drivers to go, but I have downloaded drivers for Windows 7 64 bit

  2nd I hear music and want to hear the next song is what I use, but not net if the keyboard fn +? don't not go and play / pause next thank you Stop and media player tased funtionieren not only the weis tase of modest silence

  P.s. to translate with google

  Thanks in advance
  Patrick

  Hi Patrick,

  To be honest, your ad is very difficult to understand and I don t know what you mean exactly.

  According to your assignment, it seems that you need a driver and you can get all the drivers here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  In regards to the FN keys you have Toshiba Value added Package, and Flash Cards Support utility. Everything can be downloaded from the official page of Toshiba.

• Upgrade memory on the Satellite L300 problem

  My laptop is a Satellite L300 PSLB8A 047004. I bought a kit of 2 x 2 GB modules and inserted carefully following the instructions (they clicked in place). When the computer reboots, the power light comes on, the fan was on but no other activity and the screen stayed black, no drive activity. Initially, there was 1-off 1 GB PC2 - 6400S installed module, and I checked the news is PC2 - 6400S. I took and put back in but same result. When I put the original module in it worked fine.

  Then I tried one of the new modules instead of lucky one but not original so the original module is now back in and everything seems OK.
  Any suggestions please? If there is damage of module to be managed, then the original 1 GB module should also be damaged, because this is one that s been managed at best.

  KeV.

  This is a typical behavior of compatibility issues. The modules you have, I mean who is the manufacturer?

  I recommend you to use high quality of Kingston or Toshiba products. For more information about compatible modules for your laptop computer, visit http://www.kingston.com/worldwide/default.asp

• Start secure Satellite L300 problem

  Hi all

  Satellite L300 daughter boot... yet.
  When I try f8, it will beep.
  A cursor appears in the upper left corner of the black screen.
  I can't enter in the configuration advanced with f2 and f12, but I don't know what to do when I'm there.

  The OS is windows 7 and Linux is an option.
  The last time this happened, she has managed to get into Linux to save his work University before she used the recovery CD.
  I have it it to use it only for work etc etc, but she didn't listen...

  Any advice for a fool, please before I go and live somewhere else?

  Thank you

  JWW

  Is the HARD drive recognised properly in BIOS (F2) settings?
  The value of the default BIOS and try again.

  When you start Notepad, enter using F12 BOOT menu and select HARD drive as a boot device, what happens exactly?
  No HDD LED is flashing or not? Is there a any reaction?

• Satellite L300 - problem RAM upgrade video

  I upgraded my new Satellite L300 - 11g of 1 GB to 2 GB and it works fine,

  But the video RAM still 256 MB because it is written in the manual that the video RAM is 384 during the upgrade to 2 GB.

  358 MB total available graphics memory is. This means that the video card can use MB so fine video, but it is not a constant value.

• Behavior strange screen/video Satellite Pro P100-109

  I have a strange problem with my Satellite Pro (P100-109 model pspa3e 00n009du). I edge video card printing is letting me down, so if anyone has a solution so please help!

  Yesterday, while working properly since I bought the machine, I had a strange video behavior. Black icon arround windows not updated correctly etc.
  After a restart of the system, these problems seemed resolved, but it lasted just a view minutes.
  After awhile, I got a blue screen (BCCode: ea BCP1...) BCP4:00000001 SP: 2.0) learned Internet research that his had to do with the video driver.

  Symptoms of the display:
  -Vertical dotted lines shown on the screen of the bios toshiba (variety of colors)
  -Loading of Windows show a few vertical lines as well
  -After loading the clickable elements appear black (not titles of window - no buttons shown/rendering)
  -L' screen goes black every 4 seconds
  -System responds very slowly, but sometimes it seems that it works normally
  -mouse disappears
  -After awhile that I get a black screen, system does not answer more.
  -In windows safe mode (so do not using the nvidia drivers), the display seems to work normally

  DID the next trying to solve my problem in vain:

  -J' I uninstalled/removed the nvidia drivers and installed the last on the toshiba site.
  -Deletion of original and installed drivers drivers Guru3D site (also used the Driverutility from the same site).
  -J' I uninstalled/removed the nvidia drivers and installed the original
  -Upgrade to SP3

  Uninstalling the driver (in safe mode) and so to use a generic driver only seem to work.

  Anyone know how this can be resolved or are these signs that the nVidia GeForce Go 7900 has been roasted.

  Hello

  Long story. short answer...

  It is really possible that your GPU chip malfunctions.

  I came to this conclusion because the laptop don t symptoms occur if the graphics driver is not installed.
  If the graphics card driver is installed the graphics card would go with the best performance and possibly graph questions would appear once again.

  I think that you can't do anything to what might solve this problem outside to contact the ASP in your country and ask for help.

  Good luck

• LCD screen triggers - Satellite L300-1BV

  Hello

  Recently bought a L300-1BV, for a pressie Christmas for my daughter, I was put to her.
  Sometimes the screen turns off and you do not see the screen, although it seems as if there is little light
  If you move the cover, it can cut and move the cover/screen, it may or may not come back, one day it's ok and not another

  Someone at - it any ideas what the problem could be

  Thank you

  Steve

  Hello

  > If you move the cover, it can cut and move the cover/screen, it may or may not come back, one day it's ok and not another

  To me, this looks like a connection problem. Maybe some loose cables etc.
  The FL inverter is one part he control the LCD backlighting.
  Perhaps this part of malfunctions, but please understand that it is not easy to say what the problem might be exactly.

  I think you should communicate with MS in your country as soon as possible. The laptop is under warranty and everything should be done for free.

• Satellite L300 - problem reading memory in the slot/Bank 2

  Hello.
  I have a Sattelite L300 with 2 * 1 GB memory which had strange problems of som.
  Among a large number of tests, I tested the memory inside.
  When there is a module of memory installed in slot/Bank 2 (the one closest to the bottom of the pc)
  I get an error. Bought a new module, but I still have an error, so the error must be with the Bank/slot.

  Tried cleaning the connectors of slot with a brush-glass, without a bit of luck.

  The pc works perfectly (but slow), with 1 GB installed in the slot/River.

  Can someone help me with this problem?

  Concerning
  Jens (Denmark)

  I agree with Akuma.
  If two modules don t work in the second slot but in the first place, then the second slot is defective and that means this motherboard must be replaced.

• Screen on Satellite L350D problem

  Since this laptop new but for some time now, the screen started to Flash here and there but the other day, the screen no longer works. so I plugged an external display that worked well for about 2 days now that won t work with it that the laptop is still OK you can here everything works and the fan is running.

  Can anyone help?

  Thank you

  It is certainly the unwanted material. On this virtual path, no one can say with certainty what the problem but the fact is that laptop must be disassembled and checked what may be the problem.
  To be honest I put t think you can do something about that and what you need is a professional help, so I recommend you contact the nearest Toshiba service provider and ask for help.

  Do you know how to find Toshiba service in your country?

• Strange keyboard on Satellite M211 problem

  Hello!

  I'm Belgian and my English is not perfect, then, first of all I would like to apologize for this.

  I have a Satellite M211 of China (QWERTY keyboard) and I don't know what happened, but yesterday when I'm on to use it, I discovered that the keyboard has completely changed (when I type '9' are '39' coming, when I hit 8 here "87" to come,...), all the keys have changed and it is impossible for me to use the keyboard.

  I noticed that there was a light under the 'F10', and it was new, as when the keyboard is normal this light won t.
  So I want to know how can I solve this problem of keyboard and turn off the light (I already try to 'Fn' 'F10', this does not work).

  Thank you

  I don't know how it works on the Chinese notebook models but you try using FN + F10 or maybe FN + F11. It is important to disable this LED and a built-in keyboard.

  When activated, the keys with the grey wire marking on their lower edge are either pad keys (FN + F11) or the keys (FN + F10) slider control.