Strange white rectangles in Keynote

Similar Questions

• videos are displayed as a white rectangle on some sites, but ok on youtube and with Internet explore

  I can see the videos on youtube, but on sites that link to youtube, I get a white rectangle.
  This problem does not occur with Internet Explorer.

  Try disabling hardware acceleration in Flash Player.
  
  See the videos in Flash will not play in full screen

  Blink the window "display settings":

  • http://www.Macromedia.com/support/documentation/en/flashplayer/help/help01.html

• Satellite P30-145: White Rectangle on screen

  I have a Toshiba Satellite P30-145, and he has recently developed a problem with the display. Whenever the computer is turned on, there is a large white rectangle covering part of the screen from top to bottom.

  Stopping and restarting the computer didn't help, display settings settings I tried did not work and a system restore did not work.

  I think it's maybe a problem of overheating the computer often becomes very hot and sometimes stops due to overheating (even if fans don't seem to be blocked when this happens).

  Anyone know what could be the problem and if it can be fixed?

  Hello

  I think that the fault of the graphics card might be the problem
  Maybe the GPU damaged because the temperature inside the laptop.
  As you say the laptop is overheating and it is really possible that it was a reason for that matter.

  In my opinion, you need to connect the laptop to the external monitor to check if the same will appear on the second screen.
  If you're going to see the same rectangle on the screen then the graphics card is damage and the entire motherboard must be replaced

  Feedback would be greatly appreciated

• Strange white line on screen Equium A60

  Does anyone know why a strange white vertical line appeared on my screen A60? We off fragmented, a virus scan and a cleaning disc then the line appeared about an hour after.

  That this has something to do with it? Should I install the product recovery disc? We did this a few months back, re - install too often cause damage? The line is present as soon as the screen lights up, i.e. Toshiba start screen.

  Any help would be appreciated, thanks!

  Hello

  first of all, no, system reinstallation will not damage anything.

  As you say the line appears directly after start-up the machine, the problem must be hardware related.
  Check if the problem is also on an external monitor.
  If not, the LCD is faulty.
  If so, the problem may be the graphics chip.

  Anyway, you cannot do anything alone, in order to take the laptop to a service provider.

  Good bye

• Strange black rectangle top-right

  I have a strange black rectangle in the upper right corner of the office.

  It is above all the windows, which means that I can't use the close button, and it contains two or three numbers.

  Usually, they are 060 001, but sometimes it turns into 058 001

  All those who have an idea of what it is and how to get rid of?

  I executed Windowsn 8.1 on a Lenovo Y70 Touch

  Anders

  Hello Solid_Cruver,
  It is not possible to make a screenshot that will contain this rectangle.

  But I think that I thought about it. I just created my first application 'Metro' and when it crashes (who does...) don't let this rectangle. If I restart Visual Studio, it disappears.

  Will have to look for what it is to...

  Thank you for your answer!

  Anders

• Problem with the Apple's music, let the white rectangle

  So I don't need Apple music and all the information it might have on a certain artist of my libraby (and it find it kind of annoying..)

  So I went to block it by parental control preferences (I don't have a case of AppleMusic uncheck on the GENERAL tab.) and now I find myself with a white rectangle like this:

  

  that is still more a pain in the *.

  Please, tell me how to get rid of this...
  Thank you very much!

  Enable Apple music connect new Parental slot, then clear display Apple music under the general tab.

  TT2

• How can I get rid of a small white rectangle that stays on my screen and it also does not allow me to turn off my computer?

  How can I get rid of a small white rectangle that stays on my screen and it also does not allow me to turn off my computer?

  Hello

  1. Since when are you facing this problem?

  2. have there recent changes or updates made on your computer?

  3. do you get an error message?

  4. what happens when you try to shut down the computer?

  5. What is the small white rectangle you speak?

  Method 1:

  Step 1:

  Try restarting your computer in safe mode and check if the problem persists.

  If it works fine in safe mode try performing a clean boot in order to find the cause root.

  Step 2:

  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• Problem starting. White Rectangle bars are displayed

  I did a clean install of Windows XP on my C: drive formatted.

  My startup is now more than 4 minutes.

  All this because of this progress bar with these white rectangles at the bottom of the screen that appears before Windows XP loading.

  I ran "CHKDSK/r" 2 times and no errors found.

  I tried to repair Windows without success.

  What can I do else!

  He seemed to have solved this problem myself.

  After approximately 67 resets, the problem seems to correct itself.

  But later, I got the problem again.

  If I booted up just my computer with the Windows XP Recovery disk,

  I chose to format the drive fast, before you install Windows XP on the partition, and it worked.

  I have more white bars at the start up.

• drawFocus, drawHighlightRegion & XYRect is equivalent to a white rectangle in a custom field?

  It's one of those days where I should have stayed at home.

  Why the following sets a rectangle white when the false boolean value on?

  In other words, when it put there at the point, I get the highlight of rectangle of color TYellow as expected, when there is no discussion on the custom field (a class that extends the field); a white rectangle is drawn.

  I don't want to take anything either when there is no accent, which is equal to the value Boolean false.

  protected void drawFocus(Graphics graphics, boolean on) {
    paint(graphics);
    if (on) {
      XYRect rect = new XYRect();
      getFocusRect(rect);
      drawHighlightRegion(graphics, HIGHLIGHT_FOCUS, on, 0, 0, w, h);
           int prevColor = graphics.getColor();
       graphics.setColor(Colors.TYellow);
       graphics.drawRect(x, y, w, h);
       graphics.setColor(prevColor);
    }
  }
  

  Good or bad, I solved the problem by following these steps:

  1. My rectangle of drawing in paint with the previous color.
  2. Adding a call to invalidate in the onUnfocus method:

  protected void onUnfocus() {
    invalidate();
  }
  

  If there is a better, I'll be first in line.

• I'm black or white rectangles covering my picture while I'm working. I unchecked the camera raw 'use the graphics processor' I use an end 2013 27 "iMac. Can anyone help?

  I'm black or white rectangles covering my picture while I'm working. I unchecked the camera raw 'use the graphics processor' I use an end 2013 27 "iMac. Can anyone help?

  Hi Joel,

  • What version of Photoshop installed on your computer?
  • Also, please go to the Photoshop preferences, then the performance tab.
  • Here please click Advanced under 'Use Graphics Processor' settings and change the mode of drawing on 'Basic '.
  • Also uncheck "Open CL"
  • Restart Photoshop and then try to open an image and see for the boxes.

  Let me know if it helps.

  Kind regards

  Tanuj

• Liquefy the white rectangle

  

  Why is there a white rectangle in the region where I liquefied his shoulder, and how to prevent this from happening? Thank you

  Hi michaelg23252005,

  Please read the following article and let me know if it helps: with the help of fluidity on the results of the 16-bit image areas clearer around changes

  Kind regards

  Tanuj

• My document is surrounded by a white rectangle

  The portrait document I'm working on that has suddenly developed a large white rectangle around each page. I must have inadvertently operated something but don't know what. Cancellation does not solve the problem. What have I done? How can I get my opinion normal page back?

  

  Hi David,

  You can do the following it back to the background of gray color.

  Take the white cursor. Using the right click, select 'Card game theme color'.

  Concerning

  Afonso

• White rectangle on desktop Pavillion DV2000

  I tried to fix Pavilion dv2000 a friend. I have fixed everything except one point. There is a white rectangle covering the office but the lie of icons on the rectangle.

  

  Does anybody know wht's going on here and as difficulty?

  Thanks in advance

  It turns out that it's a box of the application. The app is uninstalled but not comletely. I can drag the edges of the white on the side and it disappears. It was weird.

• How to backup only the images that are found only in the white rectangle?

  Hello!

  
  Good morning/afternoon/evening, I have a question... when I try to draw outside the lines, in my project final when I export it to an image file, looks... weird here, I'll try to upload some pictures.

  

  as I want to do as in my last project (picture) all I want is the substance that is in the white rectangle.

  Incidentally, I learn how to use it so I'm sorry!

  How do you save your picture? What type of file? What version of Illustrator?

  For example, try one of these:

  1.) export > click on work plans 'use '.

  or

  (2.) in the file > "Save for Web" it is an option for "Clip for work plan" which is what you're after.

  Perhaps one of those who will help and meet your needs?

• White rectangles instead of transparency

  Hi all

  I'm a beginnger in InDesign - what a great tool!

  I get white rectangles instead of transparency when exporting (any version of) PDF or printed, but very well when you export to JPEG. I use a 3rd party template

  Using InDesign 6.0

  Thank you

  Blackbird

  Your question of the export quality could be a couple different things. It could be the result of saterizing the vecor in an effort to solve the problem of white box, or it could be that the link is actually missing or obsolete.