Streamline/update the recovery image?

Similar Questions

• Is the PowerEdge R610 Compatible DELL VMware ESXi 5.1 update 1 recovery Image?

  Hi all

  Does anyone know if the R610 is compatible with the recovery Image VMware ESXi 5.1 update 1? It is not on the compatibility list, but the r.620 is there. We use two servers in our VMWare environment and I want to upgrade to 5.1 U1.

  Thanks in advance!

  Lee

  Hi Lee,.

  The long wait has its result.

  Seems that it's a typo. Engineering has responded that it is supported.

  Let me know if you encounter other problems.

• H8-1447ez: problem with the recovery Image

  I have HP's ENVY h8 PC bought two years ago. Last week, I tried to update my OS to Win10 - in any case - I made the backup of the downloaded and installed on USB recovery Image Win10. Don't like it, then

  because win 10 deleted the entry of the new filming, I use my USB key to back to Win 8. After some problems, I successfully restored my old BONES, but it does not recognize the partition of

  the recovery Image - neither the original nor the USB.
  I mean, if I go to settings-> change the PC-> General settings-> delete everything and reinstal windows-> start-> Reset your PC-> next it says: cannot find the files needed

  Is it possible to fix this?

  Ladies and gentlemen: PROBLEM SOLVED...

  I have successfully restored my PC in its original configuration - if you want, I can write how separate article make (fix Recovery Manager and problem with Recovery Manager not seeing original missing recovery Image).

  @veilendank10: thanks for trying to help, but my problem is of a very different nature.

• Unable to set the current location of the recovery image - "the recovery image cannot be written - error Code: 0x80004005.

  Original title Windows 8 error

  I'm trying to set the current location of the recovery image that I created with this command: "recimg /setcurrent C:\RefreshImage", but I get this error:
  "The recovery image cannot be written.
  "Error code: 0x80004005.

  I'm not trying to create an image, because I already have. I had backed up and copied to an external drive. My current drive became unbootable plu and had to rebuild and now want to set the location of the recovery image, I get this message on multiple computers.

  Hey guys

  don't know if your problem persists

  I solved my problem

  My recimg has win8.1 and my current OS is win8

  I've updated to win 8.1 and then set in the former could earn 8.1 recimg

  Salute the master

  PS. hope this works

• Qosmio X 70-A - need help with the recovery image installation

  OK, so I recently bought a new laptop (Qosmio X 70 - A) which came with pre-installed Windows 8.1.
  First thing I did was to make a backup of the system, all good and beautiful image... installed a program for a better partition the HARD drive and the program dirty windows. It would not start (a blue screen appeared with the error 0 x 80070035).

  Searched the web for solutions and managed to repair using a recovery media, but the laptop was moving to slow down, the best thing that I thought was a restore with the system that I've done before image.

  I put the image on a blu - ray player and entered the recovery media, troubleshooting, advanced option, image system restore, choose the blu - ray and he went for one minute after this error appeared 0x8078002c and my HD is completely erased...

  Please help me
  Laptop did not come with any dvd/cd etc.
  I don't know the serial number of Windows (there is no sticker on the laptop with the sticker).

  Generally the recovery image installation should not be problematic.
  A few months ago I ve installed Win8 recovery image on friends laptop U940.
  If I m remembering well, I just choose recovery image installation (out-of-box) and the recovery image has been successfully installed.

  There was no some don't troubleshoot option.
  Start your laptop and press F12 to get into the boot menu. Put recovery media in the optical disc drive, choose the CD/DVD/BD drive in the menu and press ENTER.

  Just follow the on-screen menu and choose recovery image installation (State out-of-box).

• Satellite P750 (PSAY1A) - How update the recovery partition?

  Now that I found out that using the recovery on a new HARD drive would create the recovery Partition... comes the question... How do I update the recovery partition.

  My Toshiba Satellite P750 (PSAY1A-01Y022) the factory settings has 132 update of Windows that should be applied during the first pass. I had to run Windows update 4 times before she shows "up-to-date". Not to mention drivers Toshiba as well.

  I also want to include some applications (Microsoft Office and other software and utilities)...
  Overall, I spent 2 days just to bring it t the State I want in.
  But I can't just access the recovery Partition (of the less any of this!)

  If you look at disk management, the recovery Partition is not a Volume name and that the file system is empty. If I right click on the recovery partition... all I see is "Help" Option

  I tried to assign a drive by using Diskpart letter... but it doesn't show much.
  My guess is that it is GBT/EUFI.

  Does anyone have experience updating the recovery Partition?

  > Now that I found out that using the recovery on a new HARD drive would create the recovery Partition... comes the question... How do I update the recovery partition.

  What do you mean by update recovery partition?
  The recovery partition should NOT be touched!

  In which case you'd change the partition, the HARD drive recovery process could not be started!

  Probably, you have not understood the meaning of such a HARD drive recovery procedure.
  It's the option provided by Toshiba and the recovery of HARD drive allows you to establish the notebook to factory settings; on the same State as at the first day of the purchase.

• Deleted HP Recovery Manager, not the recovery image, with uninstall. How to get back?

  I was lot UN-installing some toolbars in an uninstall program. While watching uninstall them from my Sha I saw that somehow, I had checked the HP RECOVERY MANAGER'S of the uninstall. I believe that the recovery Image is still there, she shows on defrag programs and file manager.

  How/where can I pick up this Recovery Manager. Thank you very much! Jack ":-D.

  HP 23 Pavilion Desktop

  WIndows welcome 8

  A6 AMD VISION

  I ALWAYS KUDO AND MARKED RESOLVED. It is THE RIGHT THING to DO... doncha know. «  :-D
  Find thumbs upward, then click on to a KUDO
  Look to the right and see the OPTIONS to mark ACCEPT as a SOLUTION. Thank you!

  If the Recovery Manager is very convenient for some maintenance tasks, should not be required. You can still download the drivers for your HP support page if necessary. The F11 to perform a recovery should still work because the files are there in the D partition.

  However, if you burn your recovery disks before removing the Recovery Manager, it would be a good idea to order them from HP. Bribery of HDD or a failure requiring replacement you will need to start the machine to reinstall Windows.

• I need the recovery of "Slate21 Pro" for the recovery image.

  My 'Slate21 Pro' machine became first no Android OS.

  (System freeze during update of Skype App. after that, always stop at the HP Logo when lit.)

  I tried to reset the Recovery Mode, but it failed.

  The last way is to recover by a flashing with recovery Image.

  Could you provide recovery Image files?

  Hello and welcome to the HP support community!

  Here is the HP Support page for your device:

  http://h20566.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=6657670&lang=en&cc=us

  WyreNut

• How to install the recovery image on Satellite A200?

  Hi all, I would like to do a restore to factory for my Satellite A200
  I checked their hard drive and confirmed that the recovery partition is still there

  When I want 0 and turn on the laptop, rather than the beep and the warning screen, need me only to windows Boot Manager page
  So I pressed F8 and choose repair computer, I read that I can also start the recovery process by choosing toshiba Recovery Wizard
  But when I press the Recovery Wizard, the cdrom eject and tells me to put in the recovery CD (which I did not)

  What bothers me is I checked the recovery partition is there but I can't find a way to start the process
  Someone knows the solution? Or there is another button to press when you start the machine?

  Thank you very much!

  In your case the drive HARD recovery isn't possible
  So in this case only the Toshiba recovery disc can bring notebook to factory condition.

  You have not created the recovery disc in the past well. Given that the recovery partitions seems to be available on the HARD disk, you can try this workaround

  http://APS2.toshiba-tro.de/KB0/HTD4103KB0000R01.htm

  It should be possible to create a USB flash memory key or a disc using image files which are available on the bootable recovery partition.

  In the worst case if this procedure is not possible, you need to install the clean Microsoft Windows operating system. Essential drivers may be downloaded from the driver page.

• A few questions about the recovery image installation

  A recovery USB drive created using the Recovery Media Creator contains the Windows operating system and is it the Windows key to reinstall - how it is activated. Is it different for the repair disk.

  Can be used for a new installation of Windows 7 on a new SSD? Is this just a case of connection and the recovery disc running on the new drive to th? How the recovery Partition can be re-created on a new SSD?

  Drop Hello

  I can see user Justinian gave detailed answers, and I hope you understand how it all works now. Of my overwiev aside:

  What exactly is recovery image?
  + Recovery image is an exact copy of a hard drive and contains the exact copy, byte by byte, a hard disk partition. The copy includes all the partition information, sectors priming, the table of allocation of files, installation of operating system and software application different. +
  + You are using installation Recovery CD/DVD/USB, you can restore your system after heavy data loss, caused by an accident of operating system, hardware failure or complete virus attack. +
  + Recovery image installation procedure allows the installation of system and easy to user. Unfortunately, it is not possible to restore only certain files from a disk image. +
  + Each recovery image is designed for a specific model laptop and it cannot be used for any other series of notebook. +

  With other words, recovery image is a software package that contains Windows operating system, all the drivers needed for some portable model, Toshiba tools, utilities, and also some other software. A lot of people don't like these additional software, but no you don't have to use it. all things you don't like you can remove it from the system.

  Activation of recovery image:
  When you buy the phone model you also purchase the license for the preinstalled OS version that you get with your machine. After start and contact to the internet OS will be checked and activation will be valid.

  Please note: you can reinstall original image recovery 100 times if necessary. There is not a kind of limitation, and whenever it will be activated.

  Take care of your recovery media (DVD/USB). Do not lose it.

  Of course, it can happen that you do not find your recovery media. In this case you can order.
  Recovery order - https://backupmedia.toshiba.eu/landing.aspx
  Questions and answers about ordering recovery DVDs - http://aps2.toshiba-tro.de/kb0/TSB0202TA0000R01.htm

  If you have any other questions do not hesitate to ask.

• How to install the recovery image?

  I wanted to format the hard drive and re start the use of my laptop from the first day I got it. Whenever I start my computer, I get a message «...» Swith on your computer, press F8 and choose "repair your computer"... »

  Okay, all right.

  But I tried several times but I only see F2 or F12... I pressed F8 many times and I never get access to repair your computer or something else. The F8 key is denied and I'm done with Windows startup.

  What I am doing wrong?

  TIA

  Concerning

  Francis

  Just for your info: very good Toshiba document with a detailed description on installing HARD drive recovery you can find on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

  I really put t understand why you can not enter the advanced startup options. When you start your notebook F8 repeatedly press. Try again.

  By the way: you have created recovery such DVD than recommended in the document of Toshiba s user manual?
  You can use this disk for recovery image installation.

• How to install the recovery image on Satellite Pro A300?

  I have a Satellite Pro A300 and I need factory reset. I learned from my teacher of computers there is a unknown virus on this subject. Apparently, it has been downloaded when I downloaded Malware bites. I got the laptop free of Set - BC because I muscle Handi-trophy and get tired of writing.

  My teacher told me that I need to Factory Reset, but when I got the laptop, she had everything installed on, (kurzwell, Chrome, etc.) so I don't have the disc to factory reset. In addition, the virus has disabled everything that has anything to do with the internet, (Chrome, for example, Firefox, Outlook, malware bites, etc.).

  Y at - it all means I have factory reset the laptop without the need of the disc.
  Any suggestions will help.

  Thank you

  Hello Steve

  Portable, delivered without reinstall drive have recorded on the HARD drive recovery image and if you're still using an original preinstalled operating system you can try to install this recovery image according to the recovery procedure. How to this is described in the document s user manuals or you can do this following statement described on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

  It works for you?

• Stuck on the recovery image installation

  Hello. I ordered a toshiba recovery USB.
  Just installed the os system but I am stuck on final installation, it says please wait... The installation may take several minutes
  Please do not interrupt or shut down the computer.
  Its been stuck like this for an hour and it won't let me access anything that anyone else!
  Ive tried researting does not not even tried to reinstall the recovery and still blocked?

  It is not easy to say what the problem is here. Try to format HARD drive and launch the installation of recovery again.

• Good way to update the linked Images Clone

  Hi guys, what is the best way to update a linked Clone image without having a ton of shots on the main template?

  To update, I know I have to do the following (not including the tasks of cleaning and others):

  1. Power on template, apply the changes (patches, app updates, etc.)
  2. Turn off - take new snapshot
  3. Tap the pool of offices on the new snapshot
  4. Recompose existing workstations using the new snapshot.

  I finally can clean snapshots or it will be just an infinite number of snapshots from 1 day up to this image gets his retirement? I made the mistake to delete the snapshot, that test workstations before redial already used to the new snapshot

  Thanks in advance.

  Exactly, I delete the older snapshots that I'm, and I feel comfortable.  I got more than 4 Active snapshots before.

• Qosmio G30: How can I install only of the recovery image Ulead Dvd Movie factory

  Hello world

  I have question about Ulead dvd movie factory.
  First of all, I bought my G30 with XP when it was time to offer "vista for a few euros.

  So, I installed Vista with the official CD of Toshiba. But he was more Ulead Dvd movie Factory. The XP is just a disk image restore CD, I can't install it.

  Does anyone have a solution for me?
  Thank you to.
  ARM

  I think there is a solution!
  I found the Ulead DVD Movie Factory utility on the page of Toshiba.

  I searched the area of Qosmio G30 but without to succeed.

  But I checked the other sections and selected Satellite Satellite A series Satellite A200 (PSAEC) Vista and found the version of Ulead DVD Movie Factory 5.51.0147.03

  Download a trial to install this tool.

  Need factory!