strict enum tab lock

Similar Questions

• tab locked during then that contol

  Hello world

  in a part of my program, there are two digital controls inside a while loop (while all values are selected, the user hitting stop). The loop is activated in a tab of my tab control, but the controls are in another tab.

  When the beginning of the loop in that it is impossible for me to switch from one tab to another, even though I placed the tab inside contol all loop. The problem is that the tab in that I'm locked is not the tab with the control buttons and stop!

  Any ideas?

  Thanks in advance

  Ahh, I didn't know that the tab control was in a structure of the event. Your structure to change the event value 'Y' has the value "panel lock" - so you can't do anything until this event is over, he can't because you're stuck in a loop.

  Address by clicking on the 'X', 'Y' value change event, if you select the event 'Y' and uncheck the "panel lock".

  In addition, an info: If you right-click your filepath control and select 'Options Browse... '. "you can change the folder selection mode.

  And do not be too disparaging, but your VI is really bloody messy - your future self will thank you if you keep more net.

• The Desktop tab in the display properties freezes computer

  I have Windows XP, SP3. When I try to change the wallpaper by clicking on the Office tab lock. Nothing happens. If I try to close the display properties, I get a message saying that he does not, with RunDLL32.exe in the title bar. The other tabs in display properties work fine. I've run several virus and malware detection programs and they found nothing. No idea what's happening, and how can I solve this problem?

  I had the same problem. Finally I started to think: why did this happen? I searched the registry for "Wallpaper" and maybe one of the proposed mentions it's a timeout to 20000 in relationship with the module property of the wallpaper (which units I don't know), so I left the display properties > Desktop tab in the State "suspended" over lunch. When I came back to it the destop by bike through the regular options (so you can choose one of them). I then went through and find my own picture of a hummingbird bird, and it works fine now. Without doubt, I deleted the picture bird Hummingbird long ago and had forgotten this is the desktop wallpaper.

  I hope this helps.

  Patrick Montgomery

• Pages InDesign 5.5 gel tab

  Hello

  I work with a 32-bit version of InDesign 5.5; Recently, I upgraded my Dell Studio 15 to 10 Windows. I have a processor Intel i5 with 6 GB of RAM.

  While working on a portfolio of about 70 pages, I noticed a decrease in performance and response within the program. In particular, thumbnails page tab locked pages and refused to update. This, of course, makes the extremely difficult document to navigate. I thought that the file may be making too big so I split it into two and recorded as two smaller files. This does not solve the problem. Since then, I discovered a way to force the error to occur. All I have to do is enter in the view, leave a few gaps to load, then exit at the interface of work as well as the tab pages is frozen. I can still work on the document, slowly, but have found that the best work around is to save the file, close the program and restart the application. This returns the program return to normal activities... for a while. Is this a known issue? A that someone finds a permanent solution? I tried to look online, but all discussions I've found focuses on the latest version of InDesign on the cloud...

  Update directly from Windows 7 to Windows 10 is a bit of a roll of the dice. Microsoft has done a great job and my 8.1 to 10 upgrade was seamless, but 7, you will need to wait for questions. I was totally ready to do a clean install after the upgrade.

  My advice is to do a clean install of win 10 before do you anything else, and to be aware that CS5.5 is not supported under him. The i5 isn't all that horrible but the 6 GB is quite low. I guess you have a 64-bit version of Windows, but CS5.5 is only 32 bits if you have this limitation as well.

  Even to go to CS6 would be an improvement and your license CS5.5 qualifies you for an upgrade.

• 7 flow: flow of my Hp 7 5701 need help!

  I'm updating to win 10, and my tab locked by bitlocker. and I can't recover! can someone help me?

  Key ID: F06B2C5A

  Record label: tuekhuonghp Windows 12/09/2014.

  Please, I beg you!

  I can help you, but I need to know what error you get first. Please answer.

• help to unlock ZTE a2107a-h

  Hi all

  My a2107a-h idea tab locked after too many model tries to my daughter. It asks me to connect with my. Google account and when I do it says password or username invalid even if they are both correct. I can't turn on wifi or data d. connection would be - that's why its not able to connect? Please how can I go back. Surely, there must be a way to reset attempts, even if only a few days. Help, please. I have a lot of work on the tab d.

  Thank you for your help in advance
  Toyin

  Thanks for your reply. Unfortunately, I can't go in the settings menu. The screen is stuck to one page where iy asking to connect to my google account.
  If not, how can I get to restore.

  Thank you very much

• BlackBerry smartphone password does not

  I just updated my blackberry curve and then installed the software blackberry on my new computer. When this is complete, he asked my blackberry user ID and password. I did have one, so I put one up successffully.

  Then I tried to plug my camera on my computer with a USB cable I could not continue with the wireless connection. It requires a wired connection. Once I did that, he asked the password for my device. I assumed that it was the security password that I used to go to my phone. I walked in this digitally of the key number several times and it didn't work.

  Then, I went back to my phone and entered there and it worked so I tried again to the computer, but even once, it did not work. Then I thought that was maybe missing my blackberry ID password so I tried and it doesn't work. Thinking that I maybe entered my password wrong ID blackberry I have successfully changed and tried again this password. It did not work. So, I went back to try the password of security for my phone. That would not work either.

  Frustrated I then went back to the phone and noted that now when I try to enter my password as the characters appear they don't not before and I need to press the ALT key to give numbers. Nothing seems to work.

  I wonder if, when you plug in the device, it missed my device security password or my blackberry ID password? I have an attempt to the left, and then my phone will be wiped clean of data that I really need. I tried to configure things so that I could get back data up to when it started to happen.

  My last thought was that when I would normally enter the password on my phone I would just key numbers that I use without hitting the ALT key. Now I think that if I implemented this way maybe I have actually set up the password with letters instead of numbers. I'm afraid to try because this is my last attempt before losing all data. I first want to know if the unit is now looking for the blackberry ID password or the password of security? The password ID blackberry is now the password used for my device as well? If not then I'll try the letters and try my luck.

  Hello and welcome to the community!

  I fear that, with just the one attempt remaining, there is no hope. What you are saying is everything is correct... unless you use the ALT key for each digital character, which you wind upward with is just a numeric character followed by the alpha characters where you thought you were typing numbers. But, at this distance of the internet, we have no way to tell you what is correct or not correct. I know, it's that this IS NOT your password BBID... strictly username password locking device, created originally on the device and unlock whenever it locks. The same password must be used on the PC to connect to the desktop software. But, the content of the password, alpha or numeric, must match exactly... and if indeed as you fear, you could have involved the use of the ALT key on the device, then you may never be able to know what your password was never really. With just one attempt left, all I can advise is to use the BB to re-enter, but you only get the one chance of doing things.

  Good luck and let us know!

• (Bible Library 7) program has worked on this PC when I installed it all first, but after a few updtes it won't work

  (Bible Library 7) program has worked on this PC when I installed it all first.  After that a few updates have been installed on around 18/05/12 it has not worked. I uninstalled at least 3 times now and it won't work says incompatible application.  Another thing I did was select run as personal button I think I've done worse. I don't know how to deselect or cancel that. It is to select pack 2 for XP, it does not work. I don't see Windows 7 in the list of compatlble.

  Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  If you are running Windows 7, then you don't benefit from this solution in the list Compatibility Mode as the Mode by default when nothing else is checked.

  What is your program?  If so, take a look around the site for technical assistance.  What's the story with the tab 'Locked' on this site?

  http://www.biblelibrary.com/4.html

  This allows to cancel all the settings you can do on the Compatibility Mode.

  Windows 7 - Compatibility Mode
  http://www.SevenForums.com/tutorials/316-compatibility-mode.html

  Your program works in Mode safe mode, or through the clean boot procedure?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Have you tried to test with another Windows user?

• using the 'anchors' or 'handles' perspective adjustments

  I'm not sure I have this right, but somehow, I remember seeing somewhere on the use of handles/tabs/lock points so you can freeze a part of an image while you make adjustments to the view/lenses to the rest of the image.

  For example, it would be a sort of 'freeze' the quarter left of an image while you make a correction from the perspective on the right three-fourths of the image. I don't know where this feature/tool (if it exist?): perhaps in the correction of lens or characteristic transformation filter or...?

  I'm using cs5. If it does not exist, and if you know of any tutorials or videos, that would be great. David

  I think I may have answered my own question: under transform, the Warp tool overlays a grid on the image and let's "distort you" sections, I think that give you much control over how the adjustments affect the image.

• VirtualCenter on SqlExpress vs Sql 2005 database?

  We currently have our VC2.5 database on SQL2005 Server (there is one instance alongside many other instances of sql).   The problem is that our Dba is very strict and has locked some of the roles that are required for the update of the dbases VC and Update Manager (if I understand correctly, there are some roles must be defined with administrative privileges to enable update Mgr and VC updates to work properly).

  Our database of VC supports about 100 servers and we will have more than a total of 200 servers.   My database, I tells me is currently to about 500 MB.  So with the growth, I see that the database will exceed the capacity of SQLExpress.

  I think it may be better to place my database of VC on SQLExpress and coexist with server VC, and then I can manage both to avoid any problem with our dba.

  So the question is: can I put my VC on SQL Express database?  Are there problems?

  other that the 4 GB limit I can't hand over limits.  Permissions required during upgrade DB on the server vCenter high are only temporary for the MSDB.  You are showing your DBA this KB?

  http://KB.VMware.com/kb/1003052

  In addition, you may wan to watch the calculator of virtual data center just to make sure you will be ok

• Procedure crashes and closes with ORA-04021: timeout period exceeded while waiting for

  Hello
  
  I am facing a problem in which calling a procedure in a package hangs in "EXECUTE IMMEDIATE" and after a long time out with ORA-04021: timeout period exceeded while waiting.
  I faced the problem in an existing package. Then, I tried a little test and could reproduce the problem.
  Test script is:

  kallo:DZHLHFC1> cat test.sql
  
  CREATE OR REPLACE PACKAGE BODY timeout_test AS
      PROCEDURE execute_immediate( p_cmd VARCHAR2 );
  
      PROCEDURE execute_immediate( p_cmd VARCHAR2 ) IS
      BEGIN
          EXECUTE IMMEDIATE p_cmd;
      EXCEPTION
          WHEN OTHERS THEN
              dbms_output.put_line( 'Command failed: '||p_cmd );
              dbms_output.put_line( 'SQL error message is: ' || SQLERRM );
      END;
  
      PROCEDURE revoke_priv(p_object_name VARCHAR2) IS
          l_cmd VARCHAR2(1000);
      BEGIN
          l_cmd := 'REVOKE EXECUTE ON "TIMEOUT_TEST" FROM "CSG_SUPP_LHOWNER_WRITE"';
          execute_immediate(l_cmd);
      END;
  
  END timeout_test;
  /
  show err
  TIMING START
  REVOKE EXECUTE ON "TIMEOUT_TEST" FROM "CSG_SUPP_LHOWNER_WRITE"; -- Check if command is syntactically correct
  TIMING SHOW
  
  set serverout on size 100000
  TIMING SHOW
  exec timeout_test.revoke_priv('TIMEOUT_TEST');
  TIMING SHOW

  When it is running, I get after release:

  Package created.
  
  Package body created.
  
  REVOKE EXECUTE ON timeout_test FROM "CSG_SUPP_LHOWNER_WRITE"
  *
  ERROR at line 1:
  ORA-01927: cannot REVOKE privileges you did not grant
  
  Elapsed: 00:00:00.01
  Elapsed: 00:00:00.02
  Command failed: REVOKE EXECUTE ON "TIMEOUT_TEST" FROM "CSG_SUPP_LHOWNER_WRITE"
  SQL error message is: ORA-04021: timeout occurred while waiting to lock object
  LHOWNER.TIMEOUT_TEST
  
  PL/SQL procedure successfully completed.
  
  Elapsed: 00:15:03.03

  I did some analysis and conclusions next concluded that it hangs in "EXECUTE IMMEDIATE".
  1 TOAD "browser session" shows the current statement for this session as a course of execution with "EXECUTE IMMEDIATE"
  2. no lock appear in "browser"->"tab locks session."
  3. If I comment "EXECUTE IMMEDIATE", it comes quickly.
  
  Is - this problem with a programming or an oracle bug?
  
  Thank you and best regards,
  Hey

  Hello

  I think I found the reason.
  I'm changing the grants on the same package (TIMEOUT_TEST) which I am running.
  If I change object_name in order that it works.

  Kind regards
  Hey

• Put tabs in locked point. I don't want that. How can I change?

  I use Firefox under Linux Mint Rebecca 38. I meet several problems with the functionality of the tab that don't seem to be addressed by the various tools of tabbed browsing and installed from Mozilla. Primary is EACH new future tab with the lock attribute set. Sometimes, I'll also protected. I not the usefulness or the other of these things and does not know how to activate them other than by manually once that loading tabs. I would have preferred that they not appear automatically. When you restart Firefox, each restored tab comes with two attributes, the value active. I don't know what those things are for, but I don't need them and I don't want them. How to change this behavior?

  With your impressive list of installed extensions, this is almost certainly due to one of the associated multiple tab you have extensions.

  Start Firefox in safe mode and see if that fixes the problem. If so, find out which extensions are causing the problem or simply get rid of them.

  https://support.Mozilla.org/en-us/KB/troubleshoot-Firefox-issues-using-safe-mode

• What is the difference between the Protect and Lock tabs?

  I would like to start each new session with the same open tabs pinned to the landing page for each site. I do not know how

  Is it Tab Mix Plus?

  • Locked tab: a tab that is prevented to navigate to another page or URL.
  • Protected tab: a tab that is prevented from closing.

• Firefox 31 locked up my tabs, can't move a free window autour or tire?

  What is said. After I updated I noticed that my Win 7 notebook in Firefox (and apparently IE) tabs were locked.

  I think it was intended to update FF, but it could be a setting of registry or something else.

  I have the rest and disabled all browser plug-ins in SafeMode etc, nothing has worked.

  Any help would be appreciated.

  Is apparently a system problem.

  I had to reboot and that did fix the problem.

  This problem has affected IE, FF and the office.

• How can I lock the toolbar of bookmarks to stay below the navigation bar? It moves above every time I open a new tab.

  Before the last update, my setup is: Menu bar, bar navigation, toolbar, bookmarks and tabs in that order from top to bottom. I have it configured to display the tabs do not if there is one. It starts so correct when I first open the browser, but if I start a 2nd tab Bookmarks toolbar passes over the top of the navigation bar. Is it possible to lock my settings?

  I'm having a similar issue, although mine happens when I start a new page instead of a new tab. Once I start a new page, it displays the bookmark above all bar, but go to personalization fills the installation with the bookmarks bar in its normal position. This will remain true until I start a new page regardless of the first being open or not. The current version is Ff36.0, it is not moved before the last big update. Uploaded images show from the beginning until the fixation with customization, note I do not click on anything else that customize, customization of the output.