Strongly loading please wait

Similar Questions

• Toshiba 32W3451D (B) - "loading, please wait...". "for 30 minutes +.

  I bought the TV today with a wireless adapter. I connected on my home network before pressing the button "portal." The screen went black and it says "Loading, please wait", he has been like this for more than 30 minutes. I tried to turn it off an on again once.

  Anyone know if this is normal? I have to wait much longer?

  Any news?
  The message has disappeared?

  Before you start solving problems, first of all unplug the TV from the wall outlet, wait about a minute and then reconnect the TV to the wall socket.
  Usually the TV should return to normal operation.

• Help urgently needed! -User profile takes a long time to load and the rest of the screen with the message "Please wait loading profile service user.

  Hello

  Every time that connect us to servers of TS farm, the profile of the user load for a long time and she stays with a message "Please wait for the user profile service" for longer than 5-6 minutes. We work in two areas which is configured as "an endorsement of forest transitive way." The domain (domain A) with TS farms hence connect us a cross forest profile disabled so we cannot load the roaming profile in this area, whereas another domain (domain B) roaming profile user's roaming profile.

  Also in the directory the Active directory of the domain B, TS/RDS settings is enabled for the problematic profile.

  TS / RDS--> roaming profile path and TS home folder is configured. TS/RDS settings is configured because we use other farms of machines/TS citrix other than the one in which there is problem.

  When disable us TS/RDS of the directory settings active directory domain B, then it is extracted to improvement in time. But we're in a situation were we cannot disable TS/RDS settings as we use other Citrix machines also. So we tried configuration GPO in A TS domain as

  Which allows to "allow only the local user profile".

  Allowing 'profiles itinerant Prevent password propagation to the server.

  This allows to "Allow asynchronous user group policy processing when you connect via Terminal Server Services"

  But still, there is no improvement in the time taken by the server to connect. What is the adjustment to make in the field of A TS, such that he will not try to charge the roaming of the B domain user profile, even if TS/RDS settings for the user profile are configured?

  Forums of evil: you want to Technet forums.  It's more domestic consumption...

  https://social.technet.Microsoft.com/forums/

• Computer won't startup, startup repair doesn't work & stuck in loading programs, safe mode please wait.

  Nothing seems to help.  Need suggestions! Startup Repair seems to just repeat the bar back for more than an hour, tried safe mode, but no option after I come home... says please wait and hangs on the programs loading...  ANY suggestion is appreciated!  Thank you! Windows Vista

  Hi MARSHAFAYE,

  Remember to make changes before this problem?

  Do you have an error message when you start normally?

  Method 1: Follow the steps described in the section below and then call Startup Repair

  Windows Vista or Windows 7 unbootable and the Startup Repair tool does not resolve the problem

  http://support.Microsoft.com/kb/934540

   

  Method 2: Run the Windows recovery environment system restore to put the computer to an earlier point in time.  See the front link for steps

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

• When I start my laptop Vista loaded, I get 'Please Wait' for more than 2 minutes sometimes. What does Vista behind my back?

  I have a Toshiba laptop with no extra or odd options, this is the case whenever I start and it's annoying when Vista was announced as being quick to start.  This small circular thing continues his tail for up to 4 minutes while the 'Please Wait' shines.  Very unsatisfactory.  I also bought the best virus/malware protection money can buy, at least that's what they say, it's a bit like microsoft.

  Check if the same problem occurs if you "clean boot" your system (check this page). This should load Windows Vista without third-party programs. If the startup time is better, then you will need to find or which program is causing the problem.
  However, you can check this page first.

• BlackBerry Z10 Z10 "Please wait while your device is the software update and restart"

  Sorry if this question has been asked elsewhere but I searched and could not find an answer the applies to my particular situation.

  I have a Z10 on Bell who got an automatic update this morning (I have no note of my operating system version number or the version that I was updating to) and the phone is locked to the prompt "Please wait while your device is the software update and restart."  Update messages said it would take a lot of time and that I should connect my phone if it was less than 20% of battery.

  The Bell's Web site indicates that the version of the software is 10.3.2.2168 and the latest version of the OS is 10.3.2.2252.  I don't know how many times this site is updated, but I guess that's the version that I am trying to update?

  (http://support.bell.ca/Mobility/Smartphones_and_mobile_internet/Operating-Systems?alias=BlackBerry-Z...)

  The phone is not fixed... I can see messages turn on the lock screen and interact with the phone to get a glimpse of these messages, but if I try to unlock the phone, the message block appears above any function, I tried to launch (whether a text message, the camera, an email, etc) and I can't interact with the phone at that time otherwise than to lock again and open the lock screen up.

  At the time wherever I drag, the prompt.

  The prompt on the phone for about 6 hours now.  The battery was full this morning and had exhausted 70%, but I've since plugged.

  I have not tried a batt pull because I'm afraid of the consequences of this action after the launch of the update.

  Everyone knows this and had the phoen back? I know that 6 hours is well past any reasonable wait times in my books and was strongly tempted to restart the device... but is there here experts who recommended that I continue to wait?

  I forgot to mention that the power button was still working to give the ability to power off the unit.

  In the end, I couldn't wait any longer.  I put off the device "no risk" with the power button, rather than using the battery pull method.  I turned on the camera back later and the blackberry logo appeared.  The screen faded faded black and no lights appeared on the phone.

  I could hit to swipe down to get the blackberry logo to return to the screen, but no startup loading progress screen never wouldn't come.

  I could never get to the home screen, but the phone was actually 'ON' below.  I could call the phone and it should sound, but there is no visual indication that the phone was working and there was no way to respond.  Sliding down to unlock simply revealed the word "blackberry" in the middle of the screen.

  I did a Batt pull and this time, the logo appeared as before, but disappeared forever... and then the progress of boot screen appear.

  The words 'from 10 Blackberry OS' were visible on the bottom and rotate it beween this and "install updates".

  Start-up took a LOT of time (15-20 minutes?) but after that, everything was fine.

  Displayed software update version information and it is indeed updated to 10.3.2.2168.

• This file is being processed. Please wait until processing is complete, to pass messages.

  When the check 6 accounts on a POP server, I get the message.

  This file is being processed. Please wait until processing is complete, to pass messages.

  This message started 14 2 6 accounts. I tried the suggestions at http://kb.mozillazine.org/Folder_being_processed and none of the suggestions correct the problem.

  Is there anything else I can try?

  Concerning
  AGMNS

  Look again at the anti-virus software, restart your computer in safe mode with network.

  This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  Unfortunately, one of the main aspects of the anti-solutions antivirus is that they are almost impossible to actually 'pause' and fail almost exclusively to disable when they say they are and uninstall when you tell them.

• x 305-q706 Stuck on splash screen where is says "Qosmio" with please wait...

  Hello

  recently purchased a Qosmio x 305-Q706. First time I booted up it gets to start with Qosmio screen displays with "please wait" down and hangs there forever. The only way I can get it to boot is to start cold and purée the key F12 for is loading from the startup screen, if I'm lucky, I can enter the option where you can choose which startup device, and if I manually chose the hard drive I can load windows.

  Someone at - he heard of this problem or how to fix it? I tried to change settings in the BIOS nothing. Re-iterate, it is stuck on the screen with Qosmio pslash, and if I press a key on the keyboard once it says "Please wait...". "he brings me just to the bios: (.)

  Any help would be appreciated.

  Hello

  This is a very stupid situation and I really don't understand why the laptop hangs at this level to start.
  Is somehow your Qosmio confused and cannot decide which device should be the first boot device.
  What is some external device connected to your Qosmio laptop?

  Maybe update the BIOS can help, but if you have all new laptop is not the solution. This is more recent laptop, and I presume that there latest version of the BIOS. So, if I were you I would contact either your dealer and ask for replacement or Toshiba service directly. This behavior is certainly not strange and laptop crashes somehow on the BIOS/POST (Power-On-Self-Test).

• U430 "Please wait" screen blocking the use AFTER connection

  I bought a U430 ideapad 3 days ago. Configure the laptop without problem. At ran Windows Update and updates 8.1 with 40 + updates. Everything was fine - until I turned off and restarted later.
  The Lenovo loading screen was followed by windows user login. Password entered for the user and the normal desktop appeared. Immediately a green window appeared almost fill the screen with "Please wait" in the Center and 'Cancel' at the bottom on the right.
  Cancel does nothing and the screen please wait will never - locking effectively the machine.
  The screen can not be resized, or closed, and the office is visible at the top and bottom, but cannot be selected.
  Pressing Ctrl-Alt-del and selecting the Manager tasks is not identify which charged for causing the problem and try to move applications shows the Office Manager and the task but cannot be selected, like the screen green fair overlays everything.
  I read messages online and has done a factory reset, turned off the facial recognition software and repeated the update of Windows. Everything seemed fine, but the next Green - please wait - screen returned.
  The only way I found to regain access is to run the battery down to<10%. getting="" a="" low="" battery="" warning="" at="" start="" up="" appears="" to="" stop="" the="" green="" -="" please="" wait="" -="" screen="" loading="" and="" allows="" normal="" access="" to="" the="" windows="">
  The laptop runs normally until it is turned off and then restarted and returns the screen please wait.
  Any help/suggestions appreciated.
  I have

  I was very close to retune the laptop today, but found this solution online...
  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/Windows-81-hangs-on-please-w...

  It seems that the culprit is restoreoptin.exe

  I let the battery down for<10% to="" gain="" access.="" then="" set="" up="" another="" admin="" user="">
  I could then follow instructions on the link above.

• Populating list. Please wait

  Is it running when you call the palette search in LV2010 have it, every time, display a popup that says "fill list...". Please wait... " It takes a while and sometimes its boring.

  Change your preferences.  In tools-> Options, under commands/functions Palettes, choose "Load pallets during launch."  It will take a little longer to load, LabVIEW but then all pallets will be in memory and will not delay.

• Vista stuck on "Please wait" after startup

  I have a laptop Toshiba A300 nine, with vista installed at the factory.
  After a few windows automatic updates, on reboot, vista will load and that
  ever present on the screen 'Please wait '.

  I see a disk activity. However, even after 30 minutes, he can't login screen.
  In safe mode, I have disabled the service of .net framework, but it did not help.
  I tried to use the ntbtlog.txt to learn about what his impasse, but could not understand it.

  Cause any ideas on how to diagnose the root, or even better, a solution will be very appreciated.

  Hi dbbd,.

  Thanks for the answers on the community forum.

  This seems to be defined as you said it happens after a reinstall of ITUNES.  Why don't you try not running through the steps in a clean boot process to determine exactly what conflicts with this configuration.

  Try step 1 clean boot and see if you get the error, otherwise go to step two, then step 3 and step up to the process that blocks the start is identified.

  Article for the clean boot - http://support.microsoft.com/kb/331796

  After you completed the steps in identifying the issue, please be sure to follow the procedure described in step 7 to bring your system back to a normal state.

  Thanks, keep us informed on this issue of what is identified as the conflicting service.

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion x 2 stuck on Please wait

  Hi a friend asked me to look there for laptop computer, when you start it it shows the HP symbol then moves a blue screen and then the wait please rises, I guess that's where windows is supposed to load but its there just with points going in circles, I've never used windows 8 or one of these things , so I'm a little out of my depth, I tried to reset the bios back to default values and I run a diognostics check and it came to pass that no problem so I guess it must be a software, its been like this since just after she bought. Why she did not return it so I don't know all I know, is that she tried to put the itunes on it, but he said there was not enough memory space or that she could not remember who he was as it was some time ago.

  Any help with this would be welcome

  Hello ramasesuk, welcome to the Forums of HP.

  I see that you are working on your laptop the friends, that it does not load in Windows properly, you get to a 'please wait screen. I will try to help you with this.

  At the start, have you tried to enter Safe Mode? If so, could you. If this isn't the case, I suggest to start with this.

  If you can get in Mode without failure, you can try a Refresh in Windows 8.

  If you can't mode without failure, it may indicate a bad image of the operating system. For this, you will need perform a system recovery. If your friend isn't a recovery media, she may need to contact the support for this.

  This document will guide you through the recovery process: view together to recover the operating system or reinstall the operating system. Read everything and use sub documents it leads you too.

  In case you need to contact support, the information here:
  Technical support of HP, 1-800-474-6836 in North America. For all other regions, please click here.
  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html
  Please let me know how it goes.
  Thanks for posting on the HP Forums.

• VISTA FREEZE AT STARTUP - PLEASE WAIT

  Hi need urgent help! PLEASE

  Last night Windows Vista Home d/load updates new update - IE 8 and I uninstalled Avast anti virus and put on PC Tools antivirus. He asked me to reboot I did and now when you start it freezes on the screen "Please wait" the circle continues to run and is as it is in train of thought, but nothing. I tried to start in Safe
  mode with and without networking with the command-line - all with the same result.

  This Acer is fairly new, the last month or two, not sure of exact specifications, but I don't even have the ability to repair vista or restore it from a previous configuration. Only the options as safe mode to get those and start windows normally.

  The computer came loaded with Vista Home pre and so I don't seem to have the discs. I know that normally the backup of vista is located on the drive partition, but how do for her if I can not load in Windows? I need to solve this problem, as long as it's not not my computer and feel very guilty!

  Please, if you answer no to answers tech difficult indepth I know a little but good not to juggle with the inside of the model...

  http://www.acerpanam.com/Synapse/forms/portal20.cfm?RecordID=853&formid=3390&website=AcerPanAm.com&siteid=7117&words=all&keywords=&areaid=2

  You press Alt and F10 for an Acer eRecovery Partition.

  Acer eRecovery made

   

  1. on the Acer splash screen, you can press Alt and F10 (at the same time press F2 to enter the BIOS) to make it appear a version BACK style eRecovery.

  ·        The unit is able to reload Windows from this mode faster then CD.

  ·        The default password is 000000 (6 zeros) and it is shown when you are prompted for the password.

  ·        Users are able to change the password in this mode for eRecovery only.

  ·        The system can retrieve the hidden on the hard disk (partition PQService) image or a CD/DVD media.

  ·        It is possible to reload the factory CD/DVD style or snapshots that creates the eRecovery Windows version.

  2. in Windows, there are 3 ways to access eRecovery functionality.

  ·        Press Alt and F10

  ·        Open Acer eManager and then double-click eRecovery.

  ·        When a system is new it should automatically open this application and invite you to do the recovery media.

  See you soon.

  Mick Murphy - Microsoft partner

• "Unknown popup window titled" information "appears with the message please wait a few moments.

  Original title: window unknown popup

  I'm under THAT XP SP 3 fully updated; Mozilla Firefox version 7.0.1 - I keep getting a small pop up window titled 'Information' with the message: Please wait a few moments. It has a small clock on the left side of the field. Only momentary and random. I ran Mcafee virus scan and webroot spyware with no prob on either. Is this some sort of spyware or what?

  Hello

  1. find this jump up while working on Mozilla Firefox?

  I suggest that you initialize in a clean boot state and check if the problem persists.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note:

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (d) when you are prompted, click on restart to restart the computer.

• During the reinstallation of XP, message "Please wait" frozen and inactive computer

  Recently, I tried to reinstall Windows XP SP2 from an installation disc that came with my computer. Before reinstallation, it was under XP SP3.

  He went through the installation process. It appeared that the installation is complete. It restarted (for the second time during the installation) and engaged in the usual Windows XP loading screen and now froze on a similar screen that displays the message "Please wait" instead of the loading bar. I waited for several hours, and the screen has not changed. The computer makes no noise and doesn't seem to be something.

  What should I do?

  Hello

  ·        You are able to boot into safe mode without any problem?

  ·        Did you do a fresh install with formatting or without formatting the hard drive?

  Method 1:

  I suggest you to disconnect all external peripheral devices that are connected on the system such as (printers, scanners, etc.) and check if you are able to boot to the desktop.

  Method 2:

  Step 1:

  I suggest to start in safe mode and check. Follow the steps mentioned below.

  a. restart the computer and keep tapping F8 until you reach the start menu.

  b. Select the startup options safe mode and press to enter.

  If you are able to boot into safe mode without any problems then, it might be a problem with the graphics card drivers that are installed on the system. I suggest to disable the video card drivers from the start in safe mode and then try to boot to the desktop and check.

  Step 2:

  To turn off the graphics card driver, follow the steps mentioned below.

  a. click on Start menu and click Control Panel.

  b. click System and click the Hardware tab.

  c. click the Device Manager button and right-click on the graphics card driver that is present.

  d. click on uninstall and then try to boot to the desktop and check.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.