"Stutter" read with FAST discs

Similar Questions

• Tecra A8: Mat * un DVD - Ram UJ - 841 s is not read / burn any disc

  Hi all

  I have a laptop Tecra A8 with Mat * un DVD - Ram UJ - 841 s. This device is not read / burn any disc. However, Mat * one bed the recovery CD at startup.

  I tried everything: I deleted the registry entries (lower and upper), I uninstalled Ant again once the driver installed... but it doesn't work. Any help?

  Best regards

  Ribera.

  Hello

  In addition to the fact that you can boot from the Toshiba Recovery CD, I think that it s a problem of training material
  I think it's a matter of calibration of lens readers possibly the lens can not calibrate correctly in the right position of s, and this is why the drive can't handle the inserted media.

  This could be the worst case, because this fault is repairable by replacing the drive.

• CD DVD player: can not read data DVD discs that burned same machine

  Laptop with Windows Vista cannot read data DVD discs that burned same machine.  The discs work on another computer.  My laptop will read CD disks, he did, and it will play DVD movies. What's wrong?

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 parts to no function
  while others are doing so correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner
  could help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always
  issue.

  CD/DVDs have a tolerance + - and your can read/write on the outside edge
  tolerances of the disks. They may be delivered, but it is usually cheaper to replace
  the reader.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting might not help if there are problems of alignment and wear it
  is worth it.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean the
  power and data of the contacts with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 operational parts while
  others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• SlimType DVD A DS8A5SH - could not read Blu - ray discs

  Hello community...

  My machine is ASUS A43S laptop and the drive Slimtype DVD A DS8A5SH CD Rom...

  Well, I tried to play the "Blu - ray movies" and I get on the Properties tab... Unknown disc...

  NOTE: DVD movies will play fine...

  So, I tried a few things...

  (1) installed the VLC Blu - ray playback (of course) software

  NOTE: VLC player works great for DVD movies, but won't play Blu - ray...

  (2) I tried to update driver... but the driver is updated... Of course, I look on the internet and my drive is the best. Microsoft 6.1.7601.17514 release date: 21/06/2006

  And nothing I did make my CD ROM drive play Bul - ray...

  Community suggestions...?

  I am inclined to believe that the Slimtype DVD A DS8A5SH just isn't a Blu - ray player...

  Thank you

  Hello Russell,

  Thanks for the reply.

  I appreciate your patience.

  It is regrettable that the CD/DVD drive cannot read Blu - ray discs.

  However, please do not hesitate to answer, if you have other problems with Windows.

  Thank you

• Upgrade in Windows 7 Home Premium to Windows 7 Ultimate with no disc

  Hello everyone. I hope someone can help me. I tried all day even with Microsoft technical support and nothing.

  I bought a software package for Windows 7 Home Premium to Windows 7 Ultimate with no disc. Once you open instructions are going to this link: www.windows7.com/getkey then enter a PIN code provided in the package. Well, it turns out that once you enter the link and press ENTER to the web page that appears is different, so you do not have a possibility to enter the PIN code to get the product key.
  I call microsoft support and no. surprise... no support at all!
  I would appreciate if you guys can help me get the correct link where I can enter the PIN number provided and get my product key.
  Thank you.

  Windows 7 Anytime Upgrade: Instructions (also read the section "other methods"

  First read this: Windows Anytime Upgrade: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Anytime-Upgrade-frequently-asked-questions
  Subdivision: What should I do if I bought a package of Windows Anytime Upgrade key card, but there is no upgrade key inside?
  Answer: If you bought a package of key card upgrade and the upgrade key is not inside, carefully read the instructions on the packaging. You may need to go online to get your upgrade by using the PIN key which is included in the package.

  Note: Windows Anytime Upgrade is available for purchase online in Australia, Belgium, Canada, Germany, France, Italy, Japan, Netherlands, Spain, Sweden, Switzerland, United Kingdom and the United States.

  If you encounter problems recover your key product using your PIN code, please use the resources below.
  www.windows7.com/getkeysupport.

  ======================= Upgrading ======================================

  No need to re - install Windows 7, just use the instructions of setting "Anytime" below.
  Note: This assumes that you upgrade from 32 bit to 32-bit Windows 7 OR 64 - bit to 64 bit.

  If you bought a package of key card upgrade and the upgrade key is not inside,
  read carefully the instructions on the package.
  You may need to go online ( https://windows.getmicrosoftkey.com/) to get your upgrade key
  using the PIN, which is included in the package.

  To start the upgrade process:
  Click on start/search and enter the words: Express upgrade
  Then, in the list of the search results, click on "Windows Anytime Upgrade".
  Then follow the prompts on the screen anytime upgrade.
  Basically, all you need to do is enter the Windows 7 upgrade product key.

  Alternative methods:
  (Located at the top right) Start/Control Panel/small icons option / click the "Windows Anytime Upgrade".

  Enter the text below into the run (Windows KEY + R or a command prompt) dialog box:
  %windir%\system32\WindowsAnytimeUpgradeUI.exe

  Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade
  http://Windows.Microsoft.com/en-us/Windows7/upgrade-to-another-edition-of-Windows-7-by-using-Windows-Anytime-Upgrade

  A 'step by step' to go through an upgrade to a lower edition of Windows 7 to a higher edition of Windows 7:
  http://www.howtogeek.com/HOWTO/14943/how-to-upgrade-your-NetBook-to-Windows-7-Home-Premium/

  -Windows Anytime Upgrade in Windows 7 - troubleshooting

  http://www.thewindowsclub.com/Troubleshooting-Windows-Anytime-Upgrade-in-Windows-7

  Also the reinforced system - method #2 tool (download and run the tool: "Checksur.exe")
  http://support.Microsoft.com/kb/947821
  (System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. The system update tool attempts to resolve these inconsistencies).

  -Anytime Upgrade may not work for all versions of Windows-

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
  Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have the OEM and integrators of systems product keys, this applies also to the VL (Volume License), keys (KMS) users management server should consult with your administrator before attempting to perform an Express upgrade. MSDNAA or key teaching will not work with the Express upgrade.

  -Anytime Upgade options-

  Windows 7 Starter to Windows 7 Home Premium
  Windows 7 Starter to Windows 7 Professional
  Windows 7 Starter to Windows 7 Ultimate
  Windows 7 Edition Home Premium to Windows 7 Professional
  Windows 7 Edition Home Premium to Windows 7 Ultimate
  Windows 7 Professional to Windows 7 Ultimate

  J W Stuart: http://www.pagestart.com

• Equium U400 is not reading or burning discs

  My Equium U400 is not reading or burning discs.
  Anyoe can help please?

  Hey,.

  OK, your laptop isn't able to read or burn discs, but does that mean exactly?

  Your drive is listed in Device Manager?
  =>, You can try to remove and restart your laptop.

  Do you see yellow exclamation points in weird Device Manager?
  -Online check the Microsoft Knowledge Base. It s known issue.

  You get an error message if you try Brüning a disc?
  -Online try another program like CD Burner XP burning

  Have you checked the Web from Toshiba site for an update of the firmware?

  What operating system you are using?

  As you can see, a lot of answered no question they would be important in helping you.

• need to take my computer back in the day that I first started it on7/21/2011 my restore point back up to now how can you start over from scratch with no disc?

  need to take my computer back in the day that I first started it on7/21/2011 my restore point back up to now how can you start over from scratch with no disc?

  Most OEM computers have a partition on the hard drive, that allows to give it bought as provided.  Usually, you activate this feature by pressing a key or combination of keys when the first splash screen appears at startup.  Look quickly at the first screen that appears, and you could see the key that you press.  Otherwise, go to your computer manufacturer's website and download the manual for your computer.  Instructions must be there.

  HTH,
  JW

• My original XP Pro disc is SP2. I've updated to SP3 and now I have corrupted files and need to repair windows with the disc.

  My original XP Pro disc is SP2. I've updated to SP3 and now I have corrupted files and need to repair windows with the disc. When I put disc SP2 in it tells me that it is a work old version and custom. How to make a disc with SP3 top to repair my OS?

  Hi DFPI.

  I suggest you to uninstall Service Pack 3 temporarily on your computer.

  How to remove Windows XP Service Pack 3 from your computer

  Later, try to repair the computer with the Windows XP disc and check if it works.

  Later, reinstall the Service Pack 3 after the computer repair.

  Reference: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Hope the helps of information.

  Please post back and we do know.

• So I can pick it up at the factory using F11 with no disc setting?

  So I can pick it up at the factory using F11 with no disc setting?

  Hello

  Recovery files are normally hidden in the Windows Explorer, so it wouldn't be a problem - the only way you can be sure that it works or not is to try it.

  If you find that it does not work, you can order a set of replacement recovery disks using the link below and use them to reinstall the OS.

  http://support.HP.com/us-en/document/c00810334

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• I have no disk Windows (he came on my acer computer). How can I reinstall with no disc?

  I have no disk Windows (he came on my acer computer).  How to create a windows disc or how can I reinstall windows after reformatting the drive, with no disc? (I want the drive as a disc of original windows, not a saved version, because I think that there are too many files in Windows I have right now, so I don't want to just restore one point upward.  "It would be nice if they provided real disks with computers like the good old days).

  It belongs to Acer to provide restoration capabilities. Contact with them.

• Reinstall Windows 7 - laptop does not come with a disc or I do not have the recovery partition, all I have is the product key

  Hello

  I am running windows 7 Professional on my laptop. I need to know how to format and re install the operating system. My laptop does not come with a disc or I do not have the recovery partition, all I have is the product key. I would also like to know the pilots.

  Kind regards

  Aty.

  Former title: reinstalling Windows 7

  Well, your only option is to get the Windows 7 Home Premium disc by following the instructions that I described in the following article:

  How to: What are my options for Windows 7 reinstall media?

  Then follow the instructions to retrieve reinstall them:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

  But before you do, make sure that you get the Windows 7 Professional product key if you need to reapply in the future:

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)

  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features

• When the function insert card reader with windows asking to format micro card?

  Hello, I have problem of a few days.when ever I insert the card reader with micro SD card windows asking to format...
  It is not happens with a single card, any micro SD card, I have insert Windows you want to format... but the card worked perfect in telephony, mobile and other things...

  I also try to use the same card reader & card in different windows 7 PC... It's working perfectly... .so help me with this...

  Hello

  Method 1:

  Follow the link below, run the fix it tool and check if it helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  1. check if the device is detected in Device Manager. Follow the steps to go to the Device Manager

  i. click on start, type devmgmt.msc and then on enter.

  II. research the name of the device

  If the device is not detected in Device Manager, and check if it is the hidden device.

  i. click on view under view hidden devices

  II. develop all winks in Device Manager

  III. there would be multiple entries in the device in gray Manager uninstall all entries shaded under all the winks and then restart the computer and connect the external device to the computer and check if it works

  2. install the latest drivers from the manufacturer's Web site and even ensure that the driver is compatible with the version of the operating system installed on your computer. Check if it works

  Links: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly

  Installing the driver in compatibility mode: http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  3. check with any other card SD one another if it is get recognized or detected or you can even check if the same SD card becomes recognized or detected on another computer

• I bought 5 Lightroom to download from a disc. How can I download it on a laptop with no disc drive?

  I bought 5 Lightroom to download from a disc. How can I download it on a laptop with no disc drive?

  Hi Tully,

  Please visit:http://prodesigntools.com/lightroom-5-ddl-comparison-vs-lr4.html

  Don't forget to follow the very important Instruction.

  I hope this helps.

  Concerning

  Megha Rawat

• I have CS3 on my current computer and he's dying. I tried to download it on my new computer with the disc and it will not be activated. He says it's in my downloaded material, but it is not open! Help!

  I tried to download it on my new computer with the disc and it will not be activated. He says it's in my downloaded material, but it is not open! Help!

  Anna,

  It can be a challenge to install CS3 on a newer computer because it was designed for use on Microsoft Windows XP and Vista 32-bit operating systems.  You can check this link to check systems, it is designed to work:

  System requirements | CS3 product points.

  Guinot

• I bought a new camera with a disc of Adobe Photoshop Lightroom 5.  I have a pc with windows 8.1 windows.  I downloaded and deleted about 5 times.  It says installed properly, but whenever I hit the icon the pc hangs and I have to restart AID

  I bought a new camera with a disc of Adobe Photoshop Lightroom 5.  I have a pc with windows 8.1 windows.  I downloaded and deleted about 5 times.  It says installed properly, but whenever I hit the icon the pc hangs and I have to restart AID

  Uninstall your lr 5.

  install lr 5.7.1 and use your serial number to activate.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.7.1. 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".