Style report (several sets of columns across the page)

Hello

I have a report of responses which displays the 'top 20' and has only 2 narrow columns (name and total). In the dashboard, it looks like a vertical strip:

AAA 999
AAA 999
AAA 999
AAA 999
...

It would look much more pleasant if it was a "newspaper" style, where you have more than one column of the whole page:

AAA 999 | AAA 999
AAA 999 | AAA 999
AAA 999 | AAA 999
...

Is this possible to be done using OBI EE? I looked for a checkbox style "journal" in the properties of the report (hoping it would be that simple) but no luck... I couldn't find all the messages in this forum either, maybe I'm using the wrong terminology.

Thank you
Luis

Hi Luis,.

Yes, it is possible using a PivotTable. Assuming you want 10 records by column, you must do the following:

(1) adds a column to your report with this formula:
RCOUNT (Column) - 10 * FLOOR ((RCOUNT (Column) - 1) / 10)

(2) add another column to your report with this formula:
Floor ((RCOUNT (Column)-1) / 10)

(3) go to the PivotTable

(4) add column 1) lines section

((5) add column 2) section columns

(6) add the other columns in the action box

(7) add the aggregation rule to "FIRST" for all columns in the action box

(label measure area to 8) in the section lines under column 2 area)

Kind regards
Stijn

Tags: Business Intelligence

Similar Questions

  • When I scroll in Firefox, a line of distortion appears horizontally across the page. It is in any other application.

    When I scroll in Firefox, a feint but remarkable line of distortion (directly in line with where my cursor is grabbing and dragging the scroll bar) appears horizontally across the page in multiple windows of Firefox. It is in any other application. Mac OS X 10.7, Lion on a Mac Mini Server, 2011. Suggestions or files I have to remove to do that, go away?

    You are welcome

  • When Outlook Express Mail compose the cursor suddenly starts moving across the page.

    When I'm composing an e-mail on Outlook Express if I stop for a moment the cursor starts to move across the page. I can stop by clicking 'End', but soon he begins to do it again.

    My OS is Windows XP and my version of OE 6. IE version is 8.

    If it is a laptop, make sure that you not brush your hand against the touchpad. If it isn't, try a new identity.

    You may have a damaged identity especially if it's the default main identity. File | Identities | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.

    Note: Do not use the main word in the name of the new identity.

  • Footer extend across the page on one page

    Hello

    I added a new card into my page of Contact here: http://www.localcounsellingcentre.co.uk/contact-lcc.html and now the footer does not extend across the page. As you can see on the home page and all the others, the background on the footer extends all the way through: http://www.localcounsellingcentre.co.uk/index.html

    Please can someone advise?


    Thank you
    Liane

    Well, a simple control of the code source tells us she is inside the iFrame for the Google map and inherits its width.

    Mylenium

  • straight across the page

    Hello world!

    How can I make a straight, thin line across the entire page, under my logo?

    I need the line to switch from one across the page continuously.

    I created a picture in Photoshop: I drew my logo and the line below. I gave to the line of the same width of the window by default DW (1099 px).

    Then I import the image as a .png with transparency, because it must overlap each element in my web page.

    It took me out of the container main and gave him a position of "relative", but then, live view and preview in browser are different: the line moves left or right, I can't control its position...

    What is the best and easiest way to create this layout?

    Thank you.

    Oh - do this way:

    Crop the logo to remove the line in the image. Then this do-

    You will need to replace my "#aaaaaa" with whatever color is for this line.

  • How to send the values in a column of "report" instead of a "part of the Page?

    Hello

    Here's my case: two pages A and B.
    A page is used to display each employee of a selected service.
    Page B is used to create / modify employees.

    I create a button page which redirects to page B.
    By default, page B is empty (from course to fill in the blanks to create a new employee).

    However, there are 2 values I want to send to page B (I want to fill in some blanks in advance): the service and the Manager ID ID (there is a Department Manager).
    -I managed with the service ID because it is a page element and in the "Action when click on the button" button I filled "Set these Items"-> agenda of Page B "with the values"-> about a Page A day.
    -I am confused with the ID of eating because it is not a page element, but a report column and there is nothing to do like I did for the service in the button ID to create.

    I'm a bit lost cause I don't know how transfer/send this value to the second page.

    Do you have any idea?

    Thanks again for your time!

    BR

    Ulrich

    "Cleared Cache to Page 4, when an employee existing is being changed."

    Where did you get that? >

    On page 3, region staff, the report Employee ID attribute

    See Empty the Cache under the link column

    Glad to have helped.

    Jeff

  • Passing a value of item to another page via the button set to redirect to the page

    Hello

    I'm new to APEX and I develop an application to manage Oracle database user accounts.  I have a (8) page that has text elements for the user name and the database name.  I have a submit button (this works very well) who deliver... the ALTER USER statement to reset his password and unlock the account.  I have another button that if:

    1. get the value of username - P8_USERNAME
    2. assign to an element of application - FIND_USER_IN_DB
    3. redirect the page application - page 11

    The issue is that FIND_USER_IN_DB does not get filled and page 11 which is a simple report with the following query:

    SELECT *.

    OF valid_db

    WHERE username =: FIND_USER_IN_DB;

    How to achieve this?

    Thanks for your help.

    Steve

    A page redirect is actually nothing more than the rendering of an anchor tag or call apex.navigation.redirect. The link provided by these is generated when the page is rendered. Thus, when the page is rendered (in charge) and P8_USERNAME session state is NULL, then the link will be an empty value. There is nothing sad about the fact that when you change the value of the element on a page that session state will not change automatically and it's just about understanding session state.

    Let's say that you will present the session before the redirection if status point. Would it change anything? N ° the link, as I pointed out, has already been made, and no substitution of session state not be made on a redirect.

    You'd better be off by submitting the page via the button instead of a redirect. This will set the session state of your object to the desired value. You can then use a branch to redirect to the correct page setting the value of an element whose state of session of P8_USERNAME. You can even choose to use a process or a calculation to set the value of the application instead of by a link element, so that you can keep the application not manipulable by the user element.

  • Stop Apex (4.1.0) report to run Classic rpt on the page running by default

    Version 4.1.0

    Hello

    I've created a classic report on a sql query that runs when I run the page. By default, it uses the

    InStr (upper ("PRODUCT_NAME"), upper (nvl (: P1_REPORT_SEARCH, "PRODUCT_NAME"))) > 0

    in where condition that causes the bring all records by default since nothing is still entered in the search.

    Even if I change it to something like

    InStr (upper ("PRODUCT_NAME"), upper (nvl (: P1_REPORT_SEARCH, ' %'))) > 0)))

    It does not return all the lines which is good, but displays the message "no data found".

    Does anyone have an idea how to do a sort of 'Enter the query' mode by default when the page opens upward, then after entering the search parameter and submit, only they must return lines or no data found.


    One way I can think is actually to finish with the default search and add a custom text field and a button and dynamic action to run the report. But was wondering if there is a better way?

    Thank you

    Published by: ryansun on September 18, 2012 21:07

    Published by: ryansun on September 18, 2012 21:07

    Hello

    I made the report non-null region (item value, column in expression1 is NOT NULL) and the expression entered: P1_REPORT_SEARCH. But throughout the region including the search bar is hidden.

    I also changed the: P1_REPORT_SEARCH property to Yes. Still no luck

    I'm doing something wrong? >

    The wizard creates a separate region for the search bar, Search. Looks like you have some thing.
    a. move the search in a distinct region
    b. move research and report in 2 under regions, in the same existing Sub region. make the report of the subregion.

    See you soon,.

  • Columns in the Pages of Dreamweaver CS3 templates appears correctly in IE8

    I have a site that has the most pages created with a page template that displays three columns below the navigation bar (including a small column to the left for the logo at the top of the table has four columns).  Page home (index.html - no the model) shows the columns as well as the pages of model correctly, but all pages created with the model show the first column as a means of scaling and the two columns as much too narrow.

    I searched the internet for a solution, but my knowledge of HTML is limited, it is almost impossible for me to find even a relevant forum topic, and still less a viable solution.  All I want is the template pages to three visible columns below the navigation bar to display the same width as those of index.html.

    I work on a mac, and the pages all preview them correctly in Safari, Firefox etc, but not in IE8 on Windows 7 machines.

    I tried rather indelicately push the different bits of code to set the width of the columns and make orders such as table-layout = fixed, etc., but absolutely no effect.

    The site is: www.southoverfoods.com

    If anyone can help I will be grateful.

    You don't want to fix the errors-

    http://validator.w3.org/check?URI=http%3A%2f%2Fwww.southoverfoods.com%2Fabout.html&charset = % 28detect + automatically 29% & doctype = Inline & group = 0

    Most is simple.

    If you view the page in IE9 and click the compatibility, rendering looks like right.  Unfortunately, I can't force this rendering with all accepted uses of meta tag!

    So I'm a bit confused what to do...

  • FF prevents pages from reloading each time & I have to click on allow. How to set it to allow the pages to load.

    whenever I have on facebook and allow to go from page to page (tab-to-tab) when it refreshes and try to reload the page, it has a pop up indicating FF keeps reloading... This page? I have to click on allow several times or close the window to get the page to load. I need this pop up block to stop & have looked under options for a place to stop & cannot locate the box to prevent it.

    Options > Advanced Options > general, uncheck "warn me when web sites try to redirect or reload the page.

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  • Color printing: the print has colored lines across the page viertical obliterate the copy.

    I have a printer Officejet Pro 8600 working with my vista 32 bit.system.   My copies of original color print color strines vertical on the page. I have cleaned the print heads and aligned. Everything prints fine other circuits. What is the problem? Is there a solution? Is - it physical hardware or software?

    I understand that your copies have vertical lines through them. I have a useful document that might help.

    Click here for the document.

    Let me know if it helps.

  • email accounts + updated column on the page of the options not available

    Hello, sorry to ask this, but I can't find a similar problem on the community forum:

    I tried to change the look of my Thunderbird and switched in Vertical mode, now all the options in the view > page layout are empty, no way to change it back...

    Second question: while I was managing the columns in layout with the cursor, the one on the left with all accounts, now gone, there seems to be no way to recover it. It appears when I run Thunderbird for a fraction of a second, then nothing.

    I even removed Thunderbird and installed it again, but it opens with the same layout.

    Is there anyway that I can change to the default layout?

    Thanks for any help.

    Are you using a Add ons? If so restart with Add ons disabled in order to see if it works better. Helps in the menu.

  • Since last week, when I have several windows open in firefox, the pages back and forth between windows open by themselves. This does not happen when I use tabs instead of windows, however.

    window 1: gmail (example only)
    window 2: facebook for some company (example only)
    I will review my email and the screen suddenly changes the Facebook to say P & G for example.
    If I tab1 as gmail, tab2 as facebook P & G, it won't happen.
    And it only happens in Mozilla Firefox. When I use IE, that's fine.

    What Windows platform should not make a big difference. The screenshot may appear as coming from an older version of Windows, but the basics should be the same.

    If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

    • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
    • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')
  • HP Envy 5532 Printing green lines across the page when scanning in color

    Hi, I'm Green striped wallpaper is the best way to describe it, when I scan a document color the entire page has this striped background green and the image being analyzed. The printer is around the age of 18 months.

    I tried all the diagnostic tools that are available through the printer, nothing seems to clear it.

    Any suggestions?

    Hey @thelentons,

    Welcome to the HP forums! I hope you enjoy your stay here.

    I understand that your e-all-in-one printer of 5532 Envy is scanning with green lines. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet , not a surge protector. Once it's done remove any paper flat from the printer and turn the printer off, then on again. Finally we will try to make a copy. If the copy has lines so you have a hardware problem. If you are able to make a copy without lines so you can have a software problem.

    If you have a hardware problem

    While the printer is turned on remove the cable at the back of the printer for a minute, turn on the printer and try to make a copy.

    If the copy always has lines in it then we will make a factory reset the printer. I'll send you some pointers on how to do so shortly in a private message.

    If after the reset you still have lines in print then the printer needs to be replaced. You can contact HP support by clicking here and filling out the form below.

    If you have a software problem

    I can provide you with more information, but I need to know what operating system is on your computer. If you are not sure what your operating system is you can click here to find. Please let me know what you use, and I'll be better able to help you.

    I hope this solves your problem of copy and wish you a nice day!

    If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

    If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

  • Black lines across the page

    Each page that print includes a greyish black line.  How can I eliminate this line?

    Hi BlueEyedPea,

    Your printer would require an intervention... If you get the patches even a photocopy of his problem with the printer... You can try to clean the cartridge of the printer and see if it solves your problem else, you need to get in touch with your retailer of printer...

    Remove the cartridge and try clean and then align.

    Check out: http://support.dell.com/support/edocs/systems/prn942/en/om/942_om_en.pdf on how to align the cartridge.

    I hope this helps.

Maybe you are looking for