Stylus Pro place 8 alternatives

Similar Questions

• Stylus Pro/iOS 9.2/3rd party iPad bug

  It's my second iPad Pro since Dec. 23. I had my first replaced because he was a topic on the screen which seems not to respond with my jot adonit stylus pro. So when I first came to this replacement, after the service provider deemed first one defective, I tested it before going to the store. Everything was fine. The pen worked all over the screen. Then, I have upgraded to iOS 9.2. The bug is back and on the same sector than before! The area is near the smart connector. (see attached photo) It was very similar, if not exactly the same area where the iPad Pro I had replaced had stylus response problem. I really think that it was a bug in iOS, since before the upgrade to 9.2, this problem did not exist. Please fix this in the next update.

  

  I use a point w/pixel Adonit Jot touch with my iPad Pro and have not noticed this problem at all.

  I have a 128 GB Pro iPad.

  You use the Adonit Jot Pro with the disc on the end?

  Make sure that is not the drive or the pen end i.e. issues like screen technology is different in the iPad Pro, in particular for certain types of stylii?

• Keyboard problem trip 11 7140 Pro place

  Hello. I have a 11 7140 pro place and have recently added travel keyboard.

  I found a problem but I hope for more help with.

  When I plug the tablet on the keyboard the power LED flashes white once then 4 short orange blinks then repeats indefinitely. Check the power meter app also shows battery 2 as long as it does not exist.

  I can use the mouse and the keyboard, but nothing I do seems to help with the problem of flashing. When I connect the tablet to the AC charger with the connected keyboard the light just flashes orange. I tried also to separately load the keyboard using the adapter directly connected to its port micro-USB for about 6 hours and it made no difference.

  Any help on what could be the problem and means flashing is appreciated.

  Darren.

  OK, happy to say that I myself have resolved.

  I consulted my Bios 7140 and saw that Bios has recognized the two current batteries, even if the Windows OS 10 doesn't have. He showed both the Tablet battery & battery (i.e. mobile keyboard battery) charge. under the 23W power adapter. If the Bios recognizes clearly a second battery.

  I changed all the power & battery settings (for example of Adaptive load, power on the cover, etc.) that I could find to another value.

  I rebooted the unit and re-entered Bios together as all the settings back to what they were originally.

  Re-startup in Windows 10, now battery recognisees the two 7140 & the battery slice in the mobile keyboard. It's also fresh & uses two batteries.

  QED.

• Epson Stylus Pro 7000 windows 7 64 bit compatibility

  I have an epson stylus pro 7000 and have just updated to windows 7 64 bit - there are Vista or windows 7 driver available - is it possible to use the driver in compatibility mode xp? or is there a generic driver that will work?

  You must get the 64-bit for this device driver.  Ask Epson if a Vista or Windows 7 Inbox driver is compatible.    If it is a machine large format you will need to get the Epson driver form. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Print module > Presentation > settings menu of the printer does not appear / Lightroom CC2015.3 / Mac 10.11.2 / Epson Stylus Pro 4880 printer

  I have the version 2015.3 of LR. In the print module, I click on the printer settings... button > Configuration > settings of the printer. The info for the loading paper and other settings window does not appear. I use an iMac 27 "new Yosemite 10.11.2 running. My printer is an Epson Stylus Pro 4880. I have updated the firmware and the software on this printer. Someone at - it suggestions?

  I found the solution: uninstall and reinstall the printer.

• Tip out easily - place 8 Stylus Pro is a design feature?

  All the:

  I have this new stylus on my new Dell coming 8 Pro Tablet and I am generally satisfied.  When I got the pen, I was a bit surprised initially that the tip out just with no real strength.  I assumed it was just a bad design and there's a risk that I took to be an early adopter - to be able to provide feedback on the bad designs.  But before giving feedback to Dell, can anyone else confirm that the tip is supposed indeed to come out right, or if it is fixed in place somehow.

  Thank you

  So I finally got someone to Dell to give me a yes/no answer and the answer is: Yes - the stylus is designed for the tip be replaceable - this is normal it is removable by simple finger pressure.  So the message for all of us should be very careful with the stylus - it will easily come out if he gets hooked on the fabric, the elastic loop on the case, etc.  I have a smell of a forthcoming replacement parts market

• Stylus to place 11 Pro

  Are there options for a stylus that will work with a venue Pro 11?  The active stylus for Dell received several negative reviews and is currently out of stock on the Dell site.

  All Wacom products that require activity technology sensation with the venue Pro 11 will be?

  Wacom pens and N-Trig are not compatible with the system based on Synaptics touch/stylus on the venue Pro 11 (and 8). It's new horizons for Synaptics, and Dell was the early adopter, so at the present time, there is no alternative. Finally, this should change. After having actually correctly mounted, the stylus based on Synaptics is would have been very good.

  Meanwhile, a Dell representative, calling on my keyboard out of stock and a pen, said that a new batch of styluses come out. This is after I pointed out that the pen always shows as 'Sold Out' in the shop online and I have categorically did not want to send a stylus of the original batch. But that always take it with a huge grain of salt, because the Dell support has so far been incredibly hypocritical with clients struggling with faulty pens on the lots of initials, sending them a refurb that were just as broken as the originals.

• Stylus Pro - pressure - Lenovo Yoga 3 sensitivity

  Hey guys,.

  I'm having some trouble with the pressure sensitivity.

  The support of yoga 3 Lenovo pressure sensitivity? (I thought it would be, in a computer laptop touch screen)

  I use Adobe Illustrator CC with a stylus - Adonit Jot Pro.

  I can't use the functions of sensitivity of pressure in illustrator. I tried download a few Wacom drivers, however they did not make a difference.

  If the Yoga 3 Pro actually has the functions of pressure sensitivity, how can I enable or download the drivers... Basically, how can I solve this?

  Thank you!

  Good day and welcome to the community.

  Yoga 3 Pro has a multi-touch capacitive touch screen (vs. an active digitizer).

  If you need features of Wacom-style (pressure levels, control fine tip, etc.) you will need a properly equipped machine, as a number of models ThinkPad Yoga, ThinkPad Helix or the ThinkPad Tablet 10.

  Hope this helps to clarify.

  Kind regards.

• Bought 11 5130 Pro place but Dell told Envoy held 11 Pro 7130 and send me a replacement

  I bought the "Dell place 11 Pro 5130" with the processor Atom Bay Trail and 64 GB on May 27, 2014. The item was delivered to me on May 30, 2014. The item arrived defective and the serial number indicates the element as "Dell place 11 Pro 7130" (see photo below - description of the object shows 5130 and 64 GB of storage)

   After talking to the agents and technicians, the specialist resolution Sandra, regimental 112383 says that she has checked and verified that Dell sent me the wrong item, but she would not give me a replacement or fill in the correct order. She seemed rude and appears discriminatory and also told me that I can do what I want, but it will only refund me the money and do not send me a replacement at any price.

  Dell cannot sell me a bad product and forcing me to return the unit and replace with the right pair. It is not only unethical but also illegal to sell something wrong and does not offer a replacement on your own terms and conditions.

  

  

  Just a tip, you can search on the support page of 5130 directly rather than rely on the service tag for the updates. http://www.Dell.com/support/home/us/en/19/product-support/product/Dell-venue-11-Pro/drivers

• The stylus pro 3 surface pressure

  So I have the pro 3 surface and every time that I draw with the Brush tool in flash cc he doesn't use the stylus pressure. I used photoshop and the stylus pressure works perfectly. It is supposed to be a button on the stylus pressure when I selected the Brush tool, but it isn't here. The surface pro 3 is simply not compatible with flash cc or I missed something. Any answer would be great.

  Preran,

  I solved it: I didn't have the driver installed (from N-Trig Wintab)

  My Flash version is Build: 14.2.0.20

  Thanks for your attention

  Kirill

• (Redirected) Screen problem touch 11 5130 Pro place

  I have a big problem, I did the research everywhere, but I guess I might be the only one with this problem.

  I have a 5130 11 Pro and I installed the incorrect firmware for my touchscreen accidentally, I installed the 7000 series Panel Touch Firmware, now when I touch the upper part of the screen the pointer is displayed in the bottom and vice versa. I tried to reinstall the firmware of another origin but nothing works, I tried that Samsung, that of sharp and the generic, I also tried refreshing the Tablet, to start from scratch and remove all the drivers and reinstall them. but nothing works, even when I re calibrate the touch screen it will not work properly.

  Any suggestins.

  Best of this post in the Forum Mobile-devices here:

  http://en.community.Dell.com/support-forums/mobile-devices/

  Bev.

• Blue Pro place 8 screen of death at the launch of the camera

  Has anyone else encountered this problem?

  Whatever the launch via the camera app or via Skype, the tablet will crash always.

  ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY being the error message. every time.

  Not sure if it started after the last update of the BIOs or windows updates.

  This may describe your situation and provide a solution.

  http://Forum.TabletPCReview.com/Dell/63677-camera-fails-load-recent-driver-update-Pro-8-a.html

• pro place 8 wireless network connection problems

  I have problems connecting my venue 8 pro to a wireless network. anyone encountered similar to debug and fix issues/options?

  When sometimes, I had this problem, a deep discharge set: with power supply not connected, press the button of the Tablet for 30 or 60 seconds, including after the Tablet died;  Let the Tablet turned off for 2 minutes; and restart.  Have been informed by Support technique Dell that the cause is a buildup of static electricity, which avoids deep discharge.

• Dell 11 5130 Pro place wake from sleep.

  Tried to solve this problem for weeks looking at various forums. No luck. I had to do a complete Windows from scratch reinstall because Windows refuses to load one day and my effort of recovery Dell USB disk do not have and I couldn't fix it otherwise the operating system. Before that, I don't have the problem of sleep. After the re - install a drive of Windows 8 currently possessed subsequently upgrade to 8.1 Windows and then reload all current Dell drivers "don't wake him of sleep problem" began. It's also complicated by the fact Dell the serial number of the BIOS as a model 7130 not recognize the 5130 that one actually. I hope that the problem may lie in my BIOS settings somewhere so is possible that someone who isn't having the problem of sleep can publish some BIOS settings that can give me at least a starting point that I can work from? Thanks in advance for any help that can be made.

  Obtained by.  I needed some additional stuff, but here's what I did: (1) using another computer Win 8.1, created a Windows 8.1 USB bootable. (2) plugged a USB keyboard and a USB hub on USB single and then plugged my USB port in the hub (with Tablet detached from its regular keyboard)... (4) restart and press the F12 key start USB (6) go to settings, select keyboard (5) and apply to an update of the plant (the "soft type where he keeps my data).  Then it restarts fine.

  Theoretically I should have been able to hit F12 to the regular keyboard, but it is configured so that it does F12 also hitting the Fn key and for a reason that has never worked.

  Once, I just follwed advice here (en.community.dell.com/.../19534289) and removed the Service Packs, KB2883200 and KB2887595.

• Adobe Premiere Pro: place the image sequence in reverse order on the timeline

  Hi all

  I have a numbered sequence of jpg images of frame000 to frame100. It is important in numerical order... obviously. I am trying to find a way to drag files to the timeline so that they begin to the ribs and down in order. Shift clicking in the desired direction does not work as it does in aftereffects.

  I know that I can nest and reverse the speed but I prefer to avoid nesting at this stage. I have also no option for the files to renumber it is how they are generated and I have a ton to import.

  I hope someone can help.

  To get them in reverse order, the value project Panel list view and then click the name column, so that the files are now listed between 100-001. Drag the sequence. It works for your needs?