Keyboard problem trip 11 7140 Pro place

Similar Questions

• (Redirected) Screen problem touch 11 5130 Pro place

  I have a big problem, I did the research everywhere, but I guess I might be the only one with this problem.

  I have a 5130 11 Pro and I installed the incorrect firmware for my touchscreen accidentally, I installed the 7000 series Panel Touch Firmware, now when I touch the upper part of the screen the pointer is displayed in the bottom and vice versa. I tried to reinstall the firmware of another origin but nothing works, I tried that Samsung, that of sharp and the generic, I also tried refreshing the Tablet, to start from scratch and remove all the drivers and reinstall them. but nothing works, even when I re calibrate the touch screen it will not work properly.

  Any suggestins.

  Best of this post in the Forum Mobile-devices here:

  http://en.community.Dell.com/support-forums/mobile-devices/

  Bev.

• Screen of 7140 black place Pro 11 where put on

  All,

  I have a coming 11 Pro 7140 8Gb / 256GB and am facing a problem where the machine not turn on the screen.

  The power failed when the machine was asleep/idle (click on the button side, wide screen). Now, when I try to turn on the machine, I get a buzzer to indicate that the machine is turned on, but no display. If I give the machine for 10-15 seconds, I press the windows key to get a vibration, indicating that the machine to windows loging screen - only I don't see it because the screen is always black. Incidentally I've also had this happen on my old 7130 place, but has been able to reset hard.

  So far I have tried:

  Now the power button for 10 + seconds
  Now the power button for 30 seconds
  Holding the power and volume down (which causes the screen to cycle colors full screen: blue green red black white.) Looks like a test function)
  Now power + volume (no answer)
  Now power + windows key (no answer)

  Following the instruction given in another thread of dell support, I also unplugged the main battery. I was not confident to disconnect the CMOS battery because the connector Disconnect method was not too clear and I was worried about damaging it.

  The machine has been in charge of 5 hours - then also a full battery now.

  Are there any brilliant suggestions as to what I can do next?

  A few days ago that I met the same problem with my 7140.  The question was clearly linked to my dying battery keyboard.  I took the same steps that you did with no luck!  However, I am happy to say that the unit is now in place and running after STALL main battery, CMOS battery and all the cables in water under the main battery.  I also removed the SSD.  Once everything has been deleted, I pressed the power button for 60 seconds, drain current in the system and he left in the morning to the evening (about 10 hours).  I held the power button for 60 seconds, then replaced everything mentioned above.  The first start was slow, but he has been back to normal since then.  I have re-flashing the bios with the latest version just in case any data UEFI has been altered by the question, which is certainly possible, since the issue prevents even the UEFI to load correctly.

  I recommend, if you use a keyboard of the battery, do not use during an attempt of the steps above.  It was clearly the problem for me, diagnostics tests run since getting my Tablet upward clearly demonstrated.  Good luck!

• Satellite Pro A40-240, keyboard problems

  Hello!

  I had problems with the keyboard of my Toshiba Satellite Pro A40-240... "Sometimes the"<" key="" print="" a="" lot="" of="" characters,="" and="" sometimes="" the="" "sticky="" keys"="" are="" authomatically="">

  This problem starts without any previous sign. A suggestion?

  Thank you!

  Check your keyboard settings?

• Satellite Pro C50 keyboard problems - A - 1 L 6

  Hello

  I just bought this new Satellite Pro.

  I have installed all the drivers and updated the bios to the latest version, but I still have the same problem: when I write, many times my keyboard writes double letters (for example, all ten words written keyboard a letter double, as "keybboard").

  I tried also to change the properties of the keypad on the control panel of Windows 8, but nothing has changed.

  I called support, but they just told me that I have to bring my laptop in a helpdesk: but I need my new computer to work, and I wouldn't be happy to lose at least 4 weeks!

  And, support told me that, if the laptop has no hardware problem, I would have to pay for assistance...
  .
  So, this is my first experience and unlucy in the world of Toshiba...
  Is there someone who can give me some advice to solve this problem?
  It may be a problem running on the new laptops, and someone knows how to fix this?

  Thank you very much!

  Hi guys,.

  As far as I know that these similar keyboard problems in the past could be resolved by the BIOS updated.
  I found the new BIOS for Satellite Pro C50 - A
  http://Support1.toshiba-tro.de/Tedd-files2/0/BIOS-20140912105436.zip
  Worth a try

  Another question: If someone has done to test a USB external keyboard?
  In the case where the external USB keyboard would work correctly, this issue isn't associated with BIOS or keyboard controller but probably his keyboard fault internal.

• 11 7140 pro meeting place cannot activate audio maxx

  Hello

  Got my 11 7140 pro with windows 10 place now. Really happy with the product so far, but I've noticed that I can't activate audio maxx on it. He came up with message 'Maxxaudio supports stereo output only. Please can someone help, because the current volume level is not enough at this point.

  Thank you

  Your system is upgraded from 8.1, or you perform a clean install of win 10?

  The reason why I ask is because I did a clean install, let Windows update capture some pilots he thinks he needs and MaxxAudio works very well.

  Have you tried to uninstall the drivers, reboot and reinstall the drivers?

• AI CS5 keyboard shortcuts do not work. I restarted and have no other problem with my MacBook Pro. What is the problem?

  AI CS5 keyboard shortcuts do not work. I restarted and have no other problem with my MacBook Pro. What is the problem?

  Bill,

  The following is a general list of things, try when the question is not in a specific file, and when it is not caused by problems with opening a file from external media. You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) (check the box to delete the preferences), run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) to uninstall and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Venue 11 7140 pro micro HDMI does not work after upgrade windows 10

  Has anyone tried connect a HDMI microphone on their place of dell 11 7140 pro after windows 10 upgrade? Mine does not work after the upgrade, but the HDMI from the dock works.

  I have thus display driver problems on 10 to win.

  For me, the micro HDMI port works fine. I use an active adapter, so that could make a difference.

  The HDMI on the dock works well, but only if I directly connect to an HDMI display. If I try to use a passive DVI adapter, then the external screen is not recognized. In addition, the DisplayPort on the wharf is also unnecessary, regardless of the type of cable or attached monitor.

  I encounter this problem after performing a new installation of Win 10, using the brand Dell drivers and latest drivers Intel installed by Windows update.

  It is certainly a driver problem Win 10 because everything works fine if I boot the Tablet under Linux using a USB key.

• Portege R830 - Trackpad/keyboard problem

  HI - hope someone can help because I have only a few strands of hair left out!

  In the last two weeks, a problem has developed with the trackpad - and maybe my keyboard. Here are some of the symptoms

  1. the cursor on the screen suddenly freezes. If I leave the laptop and work back, and it's not.

  2. If I tap on the keyboard (can simply press the keys or I could be typing in a document) and the cursor may freeze again. During this event the little 'mouse/trackpad' power icon flashes briefly on the screen. If I hit another key (literally anywhere on the keyboard) a number of times (not the model number) the icon can cycle and the slider moves and then freeze again.

  It's as if each key on the keyboard is somehow the role of the FnF9 key.

  Unfortunately I took the laptop on a business trip recently and this time after initialization the laptop - the cursor was frozen and no amount of pressure button thoughtful or random didn't get going. It is a working battery. That scared the hell out of me.

  If I plug in a USB keyboard and mouse and then pressing the keys on this keyboard does not cause the cursor to freeze. But he can do anyway - as described in 1. above.

  The F9 key will unlock the cursor (I guess re - turn on the trackpad) - but it won't be long before cycle back again.

  I did not drop the phone. There is nothing physically wrong with her. The battery holds its charge and it starts successfully. I did no change of material during the month.

  The only button on the keyboard that is not working is the mouse/trackpad power button just above the space bar. It feels a bit depressed - but I think that is how it has always been. Juggle it makes no difference to this bizarre and erratic behavior. But perhaps this is relevant.

  When I tried.

  Reinstall the trackpad driver (Synaptics).

  Reinstall the PVAT (value package).

  I even tried to re-imaging of HARD drive to one of these days - and the other just after that I bought the laptop in 2012. Which should have solved if it was a software/driver problem - but it didn't.

  One thing I did not, is venturing into the BIOS. Maybe there is something in them?

  In Device Manager that everything is listed - no warning at all. There seems to be be no IRQ conflict.

  This could be a hardware problem? I read that the keyboards on R830 are quite likely to damage/stoppage of work. A the United Kingdom popular auction site has sellers who claim to have sold more than 40! That's a lot of R830s who have had new keyboards.

  I also know that a replacement is a pain, so I hope that's not it.

  Someone at - it suggestions? It makes me crazy.

  I google extensively and can't come up with anything either. There are the usual raft of people trying to find how to activate the trackpad or disable - but none seem to be struggling with the laptop made for them.

  Help!

  Hello

  According to the description of your problem, it seems that the touchpad is disabled automatically.
  As you have already mentioned, the touchpad can be enabled and disabled by using the FN + F9 key combination function

  Since you have also some keyboard problems, my theory is that there is a problem of keyboard that may be responsible for the touchpad ON / OFF question.

  What do you think of this theory?

  I put t think there is a software problem because as you already reset the system to the point in time at the beginning (factory settings?). This is why I think that the conflict of software cannot be the reason for this.

• HP 2000-2d29DX laptop PC: keyboard problem

  Hello guys,.

  I have recently encountered problems with my keyboard and touchpad. But first I turn to the most pressing is the keyboard problem. Sometimes, when I booted my computer a few keys alphabet such as r, o, m (seemingly random keys) do not respond. This problem started with my arrow keys but since moved other keys. I tried to reset my PC that did not help much, so I uninstalled the keyboard driver via the thinking Device Manager I easily find a nd downlaoad and install new drivers from HP support or elsewhere. So the problem, I could not find the drivers for my computer, I searched for the last 2 days and I am always unsuccessful and very frustrated, I can't use my keyboard and now I do all my typing via the on screen keyboard, very taxing to say the least. Help, please. Thank you!

  Hi there @Orlando-Okwayo,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that the keyboard does not work on your laptop of HP 2000-2d29DX. You mentioned that some of your keys on keyboard do not respond.

  Please follow these steps in troubleshooting provided:

  • Beginning
  • Search for Device Manager
  • Search results, open Device Manager.
  • Click on display
  • Show hidden devices.
  • Click the arrow next to keyboards.
  • Right click on the name of the keyboard device.
  • Select uninstall.
  • Continue deleting the names of devices in the category keyboards until the feature of all the names have been uninstalled.
  • Restart the laptop twice.

  I found a document of troubleshooting for you to try called Portable keyboard troubleshooting.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated. I looked at your page HP 2000 - 2d29DX Notebook PC (ENERGY STAR) - software and drivers and I don't see any drivers for Windows 10.

  Another option for you would be to restore to a previous Point before this happened. He must put it without losing anything.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• I started to develop some keyboard problem checked for all solutions could not.

  I started to develop checked for all the solutions found no keyboard problem. I realized that my net work is tahen above and my files diverted that I get these links of text by people representing miceosoft, promising new computer, employment and they reformatted my windows from vista to 7 and said that my reward .they have to my media my setings channged al and obtained the list of my contacts by sending them the meseges. Send me micro soft web pages which later changed in sofamicro. I'm afraid to use any String with soft micro logo on it .i ned help please, my our user at my items folders and emails al ben reset my key board break some keys and few of them do not work, the poster to the conection USB keyboard device manager there is corruption. Norton report ip who took the relay from my computer... I am the only user of this model as administrator, but the net work listed others that I can't remove, this AI out of this world, al tools that they could use to place these links and ask me click on a such that they were the ms Tech

  I do not understand some of your words.

  • 'stached"--> home?
  • "delwtwd"--> deleted?

  Assuming that I got those right, the answer is not much sense yet.  Take a deep breath, take your time and use simple language with common punctuation.  Type slowly.  Your hands are going faster than your mind and makes it hard to follow.  Don't make things worse by getting over excited.  ;-)

  What I tell you (based on the original post and now this response), this is your best course of action with your horribly hacked and infected system should all erase and start over - disconnecting the network while you do this to your computer.  If you have a USB and there are some select files/folders you want to have no EXECUTABLE in them - copy those turned off.

  You should probably reset each password you have for each account that you have as well – each of them.  Anywhere - Internet, etc.

  You may want to also likely reset everything router you might have that connect you to the Internet if there is a custom configuration - as they have probably your router pirate as well - giving them a back door at least in your network.

  What you have presented I can assume only you have been scammed.  They have probably used something like VNC or TeamViewer and your willingness to participate to take complete control of everything you have on your computer and possibly connected to your network.

  If it is a business network - disconnect your computer it immediately and contact your it Department and let them know what you think.

• Keyboard problems - Windows 7 RTM on Thinkpad x 301

  Greetings,

  The fighting had thereby a few days and haven't seen all the other notes on this subject.

  I installed Win 7 (business) RTM about 3 times - both 32 - and 64-bit and is the version gives me a problem with keyboarding. Basically, if I type REALLY SLOW, all right. But whenever I go back to normal typing speed, I'm getting erratic behavior. Sometimes while I'm typing, the cursor will jump to a place earlier in the same line and insert new text from there, or sometimes it jumps to the line next, or worse yet, I use it via Remote Desktop on my primary computer running Outlook, it will send the message in the middle of a sentence. (A bit annoying...!)

  It's as if I'm hitting certain types of combination, but I was not able to get fairly constant to understand. It could also perhaps be a sort of full buffer problem after - x-strikes. So here's a question - if you have no job, can you confirm that beta Lenovo drivers you have installed?

  I tried a little, and later a clean 64-bit settling without adding anything else yet.

  Other keyboard problem and some missing OSD indicators, I like the performance and ease of use. But if I can't get the keyboard works, I'm back to XP...

  (Note that I test - I reinstalled XP preload, and kbd was fine - is not material)

  Thanks for all the ideas...

  At this point, I REINSTALL ALL the detached (yet pre-release at the time, in late September) did was install drivers and keyboard.  However, I need to agree with poster above - we need Lenovo to specify exactly what drivers are needed and any requirement of installation sequence.   Somehow, I think this is what makes the difference in my case, but I'm still just guess.

  but so far, Win7 on my x 301 now works...

  Good luck to all-

  Anthony

• On Satellite L750D keyboard problem

  L750D keyboard problems

  Hi some of the keys on my L750D don't work correctly for example
  The R key works fine in word format, BUT on a page web, it removes what I typed above
  The SHIFT key in MS word deletes a line on the web pages need you out of the box, in which you type
  Key 4 above the alpha keys is stuck and only appears as the sign $
  Enter the key 4 on the left is fine
  The caps lock light doesn't turn on but works fine

  Everything else seems fine,
  Because the R key work different in different applications I m thinking that it s not a problem of keyboard more in the settings (I did a restore without help)
  Please help is it possible to reset the keyboard to its original settings?
  L750D keyboard problems

  I can only imagine that you can try to fix this BIOS update. Have you checked on the Toshiba support page if the newer BIOS version is available?

• Problems with disk Satellite pro 4200 hard assembly

  I have problems with a Satellite pro 4200.
  The Notbook reads no more disks. Undercarriage I traded the loan, but did not work. Undercarriage is addressed, but it is read the discs is not possible or formatted. Also, an update of the Bios is not possible, as undercarriage reads no more disks.

  CU
  Eltgen

  Hi Eltgen

  Sorry, but it is not easy to tell what the problem is on that path. If I understand you well you have built in a new floppy drive, because the old one was faulty. Am I wrong?

  It will be interesting to know is the new part already used. Perhaps is the new one also defective. I hope that a little light is on if you put the disc inside.

• Portege M600: keyboard problem

  Hello

  My M600 just got a little problem (I hope) today.

  The 'x 'key' doesn't quite work. I have to press very hard to show the letter 'x '. It seems that the upper-left hand corner of this key is stuck, so he bends to the bottom right when I press on it. How can I solve this problem?

  I am located in Glasgow (G4 0JQ) and do not know if there are any office of maintenance here, but just know the nationalwide Service Pick-Up & return for laptops Web site. However, I prefer to deal face to face with the engineer in a few minutes, because I guess this isn't a big deal, isn't it?

  Thank you very much
  Ting

  Hi Ting

  What to say? You know that the best solution is ASP and finally change the keyboard. I really don't think you can fix it alone.

  I recommend you check out http://eu.computers.toshiba-europe.com > support & downloads > find an ASP. You will see where is the nearest ASP. Make a call and see what they say on keyboard problem.