Sudden and mysterious my folder data loss

Similar Questions

• Pavilion m6 - stop suddenly and mystery of the power cord

  Hi people,

  I got a very strange problem with my laptop from m6-1035dx Pavilion the past two days. This is a reconditioned unit and have had some problems with it in the past (both hardware and software-related) that I managed to fix me, but this one left me speechless.

  It started yesterday when the computer was placed on a bed (with a CoolerMaster pad below, which I almost never separate the portable device) and immediately turn off the power. In the past, I had problems with heat stops, that I solved with a bit of air in canned and CoolerMaster pad said, so I don't think much. But the same thing happened today, and I noticed that when it has restarted, it does not recognize the fact that the computer is plugged in. Unplugged the cord/AC converter to three points (computer, converter, wall) and tried again, still nothing. Tried another outlet, blew the vents, power off and removed/re-inserted battery, still no recognition of the power. I reinstalled HP CoolSense (which I had removed several months before) and hope that would take care of things. Meanwhile, I shut the computer off again, and the LED power indicator lit on its own.

  Several hours later, the computer was reactivated and placed on a flat surface. Someone tripping over the cord, and the computer turns off again. The LED power indicator is out once more, so I unplugged the power cord and left for a few minutes. Blocked again, and the power was back.

  I am reasonably confident that I should replace the power cord at this point, but I want expert advice before I commit the money that him. It may also be interesting to note that while the power cord did not work, the battery (92%) had about two hours and six minutes of use remaining, which is well below the advertised battery capacity (to be noted that only Chrome was running at the time) and what I saw of the battery in the past. I think that the cable or converter can be shorted, then is it safe to use the computer at all? Wouldn't be a good idea to replace the battery as well? I will provide any other details if necessary and thank you in advance for any help or advice.

  Hi maestro35,

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having feeding problems with your Pavilion m6. I'll be happy to help you with this. If it is running with the battery, I wouldn't worry about the replacement of the battery quite yet. As for the fact that it gives you less time announced that it could be the mere fact that the battery life decreases over time. You don't mention your operating system, this is why I have included two links below which will allow you to test and calibrate the battery. This will confirm that the battery is working properly.

  Test and calibrate the battery (Windows 7)

  Test and calibrate the battery (Windows 8)

  I agree that it appears as if the power cord is the question. If you have a similar cord, you might give it a try to see, but there's a chance it might be the prospects of power supply for laptop. If something is shorted, then you shouldn't really use the laptop but without testing actually physically we will not be able to determine if something is put in short circuit.

  Thank you

• Need help to avoid data loss on a corrupt and/or failure to hard drive

  I don't know what happened. One minute I'm surfing the web and listening to music on iTunes. Then out of nowhere he had a sudden failure. Changed not long at all, but now when I try to turn on my computer, it starts normally but then shortly after that the chime and the apple logo appear, if a progress indicator yet that I've never seen before today. Until the progress bar is still the size of my little finger nail, the computer turns off just. I started in recovery mode and run disk check and repair utility. Make sure the disc is not far off when he said something like - disc cannot be checked completely. Disk needs to be repaired. So when I click on the repair disk, it works only for maybe a minute before it comes up saying - utility disk can't repair the disk. Upwards from your many possible files, reformat the drive and restore your backed up files. So obviously it's not good. What are my options and can I do to avoid losing data that is not already saved? I have a lot of things that have not been backed up and lose some of them would be pretty damning. That's my main goal; data loss as little as possible. My computer is an iMac 2012 end Mavericks 10.9.5 running.

  Thank you.

  You do not have a current backup? If this is not the case, your only real option may be to pay a data recovery company and see if they can help you. Which can be very expensive.

• Data loss after the instant withdrawal (and errors)

  This title does not exactly cover all this... but the biggest part is covered.

  I'm fairly new to Vmware ESXi, but yesterday we had a problem. We had exactly this error in ONE of our virtual machines

  We have 2VM on a 250 GB SATA drive to the address in the mirror.

  Drives: 1 x 40 GB / 1 x 100 GB/1 x 70 GB

  As you can see, there was little room left. When the system tried to make snapshots (don't ask me why, we certainly didn't want to, we create backups on a San from some windows), he could not and that he left us the above error (at least that is what I think). After a few minutes on google I found this page http://virtrix.blogspot.com/2007/06/vmware-dreadful-sticky-snapshot.html.

  Then came a thought that it just was not enough room to make a snapshot. If a 160 GB extra hard drive is added to the server (physical). I copied the VHD, including the-000001-the new hard drive for the files delta.vmdk and - 000001.vmdk ( which took forever, 103 GB at least 6 hours all thoughts on this /offtopic).

  I removed the hard drive of the virtual machine (on the physical disk, the file has been moved to the new drive) and added the virtual disk to the virtual machine (not the delta, but the real - flat file).

  Then I did exaclty the last line of the page linked above, the line ending by "great huh? But things are not that great, because now we have data loss. I think that the changes in the files of snapshots must be inserted into the - flat file, but because the situation has changed... is it possible to do? Otherwise a few weeks of work or disappeared into thin air... (not yet looked in backups...)

  If the virtual machine never was under tension since the creation of hartserver_1 - 000002.vmdk we can ignore it.

  I started to copy the files after snapshots were made, I did not copy the snapshot files. and as I said in my first post,

  I deleted the disk of the virtual machine and added the 'copied' to the VM disk. (the - flat file) is when

  data loss of course occurred because the disk know not the snapshot files.

  In this case, copy the snapshot files to the new folder AND rename the old folder.

  Can also edit the VMX file and remove all the absolute paths.

  Example:

  scsi0:1.filename = hartserver_1 - 000001.vmdk

  Instead of

  scsi0:1.filename = /vmfs/volumes/49acf302-aff5ac21-ddde-000423c854bc/hartserver_1-000001.vmdk

• What is WinWord 8 and what is it? It appeared suddenly in My Documents folder, and it is marked read-only.

  What is WinWord 8 and what is it?  It appeared suddenly in My Documents folder, and it is marked read-only.

  original title: what is WinWord 8

  What is WinWord 8 and what is it?  It appeared suddenly in My Documents folder, and it is marked read-only.

  WinWord8?

  Part of Microsoft Office 97.  Maybe a part of a previous version of Microsoft Works too.

  Delete it if you don't need.

• One of my Office of mysteriously missing folder? !!

  A folder that I had on my desk (with a number of photoshop and jpg files), has apparently disappeared in the air!

  (SOMEONE ELSE HAD FOLDERS DISAPPEAR ON THEM BEFORE?!)

  I tried to search the names of missing files via the Finder and Spotlight, but nothing came on my missing files. I did not remove this file.

  I tried to use some free trial called iSkysoft Date of recovery program, but it will leave you not even get anything, unless you pay a heavy tax. And even then, there was a lot of content to sift through (it was not the name of the original file), so I don't even know if it was there.

  It's very frustrating. I just bought the Mac OS X El Capitan a month ago. I work as an artist, and I CAN NOT have just record mysteriously disappear on me.

  I am trying to familiarize myself with other useful programs, no iCloud help things back up automatically. (I've not used before).

  Also, can someone suggest a perhaps different data recovery program?

  Thanks for any advice.

  OS X does not magically records and data, I suspect a user has made a mistake. Open the Recycle Bin to see if the folder and its contents is there. If they are then right-click and select set back and continue your work. If they are missing use your Time Machine backup to restore the folder. If you do not back up the computer and the data are not in the trash she is lost and cannot be recovered. That's why TM exists to avoid any data loss. If you do not use it please get an external HD to start to back up your system. If you are not familiar with TM please click on use Time Machine to back up or restore your Mac - Apple Support for more information.

• Mysterious mobile folder: Music folder has mysteriously moved into my photo folder

  original title: mysterious movement file

  My Music folder mysteriously moved into my image folder and I can't understand why.  The record is on 34gbs so there is no way I could have accidentally moved on mine without noticing.  Anyone has any idea how it happened and what I can do to prevent it from happening again?

  You may have accidentally dragged - fell into the photo folder.  Move a folder - even that which is several hundreds of gigabytes - only takes about one second (assuming both are stored on the same drive).  This is because the move operation is really just an update a line to the NTFS file system data table: none of the files are actually "moved" the reader is concerned.  Copy, however, takes time because the reader must actually write every file.

  It is most likely.  I would be it back to where you want and see if it happens again.

  Alternative: if it's a library and not a folder: you can check to see if your photo library is actually, in fact, just your music folder content aggregation.  You can open your pictures folder, and then click the link "Includes 2 sites" at the top to change what one or more folders appear in the photo library.

  If it solves your problem, click on the link "Propose as answer" below and vote as useful by clicking on the green triangle for the lelft. Thank you!

• Palm E2 data loss

  Help! I loat my PALM E2 and tried to sync my desktop with a new E2 I had and she deleted the office somehow.  Is it possible to recover what was in the calendar before my mishap.  Thank you!

  millershrink wrote:
  

  Thanks WyreNut.  I didn't was not able to recover data of ants from the desktop as a tech friend who spent 2 hours at my house last night explained to me because I had put my system for handheld to replace office, inadvertently.  He was able to recover a large part of the data loss because I Carbinite on this pc.  So I'm pretty much OK.  Once again thank you for your time and expertise.

  Exceptional!

  You can never have too many friends 'tech', huh?   Accessories for her to properly diagnose our ancient, yet superior PDA system!

  

  WyreNut

• Producer/consumer vs Master/Slave of data loss

  Hello users of Labview,.

  I did experiment with vs p / M/S lately in the context of data aquistion. Many messages did appear (correct me if I'm wrong) that p/c is the correct architecture to if the data retention is desired, so that's what I tried to implement.

  In the loop of producer, I've included 3 Assistant DAQ VIs (2AO, 1 HAVE), which generates data actively and which is being queued. I have 3 other loops of consumers, two of which are consumer 1) written loops of 2) outputs TDMS data of a chart 3) no producer: structure of the event, monitors changes to the user interface.

  When I run data acquisition, the generated file are always half either acquire the half of the sample that I've specified regardless of the sampling rate. I also have a strange displayed graph (see image).

  However,.

  If I replace with a master/slave architecture, this seems to solve the problem.

  So question is: anyone met with this kind of problems? Are there disadvantages to stick with M/S instead of p/c in terms of data loss?

  Thank you

  johnji wrote:

  I think I'm well done

  You are not.  Once an article is removed, he went.  Since you have three loops made of the same queue, each loop will get ~1/3 of the data.  If all the loops are to treat everything, then you want another line for each loop and meet the producer, write to each queue.  You can also use a user event.

• How to convert NTFS to FAT32 without data loss?

  Hello
  I want to format a computer with 4 logical partition, where C: is partitioned FAT (Windows NT Server), and other (D:, E: and F :) are on NTFS.

  Now I want to install Win98 on it, which requires the hard drive or FAT32 partitioned. How to do that without losing valuable data in all 3 NTFS partitioned drives.

  Hello

  I think you are very lucky.

  Aomei technology is giving away NTFS to FAT32 Converter Pro Edition 1.5 which can help you convert NTFS to FAT32 without data loss. The offer is limited from 18/05/2011 ~ 23/05/2011.
  Contest page: http://www.aomeitech.com/giveaway/ntfs2fat32.html

• Converet GPT without data loss

  Hello

  I am formatting my system. Partition there are two in my drive C & E system. Now when I'm getting type format my PC. He is in error of TPG. I have given in the E drive, now if I use the command wipe the drive, it will clean my data. So, how can I change one partition or a full disk without data loss. We formatted our system C drive.

  Kind regards

  Kuldeep Singh

  Hello Kuldeep,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the exact error message or code when you say, 'mislead the GPT?

  Thank you for details on the issue.

  GUID Partition table (TPG) is a new style of partitioning that is part of the Unified Extensible Firmware Interface (UEFI) specification. This is used for Windows 8 facilities factory for more flexibility of partition and

  more advanced features of Windows 8. With an installation of Windows 7, the GPT partition must be removed and UEFI BIOS must be configured in a configuration to boot Legacy.

  I suggest to check the following items and check if it helps.
  Reference:
  http://www.Dell.com/support/article/BB/en/bbdhs1/594701/en

  Windows and GPT FAQ
  https://msdn.Microsoft.com/en-us/library/Windows/hardware/dn640535 (v = vs. 85) .aspx

  Important notes:
  Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Transfer of files between drives: data loss or corruption?

  1. Is there data loss or corruption during the transfer of files between disks in Windows 7?
  2. What about very large files, gigabytes in size?
  3. Is it possible to check if there is data loss or corruption?

  Creation and verification of a checksum is a file operation.  It doesn't matter where the files are stored.

  It doesn't matter if the source is a CD, a USB flash drive or a hard drive.  As much as the destination is concerned, if you write a large file on a CD, the possibility of error is greater if copy to a USB flash drive or an external hard drive.  Which is why you often see tips to burn at the slowest speed available when writing large critical files as an ISO installation file.

  The only difference between 'copy' and 'move' is this movement copies the file and automatically deletes the original.

  You want to make sure that the file copied correctly before the original has disappeared.  The way to ensure that is to perform a copy operation, check the integrity of the copied file and delete the original.

• message from data loss

  I have a pdf file, I open in illustrator

  and when I do I get the message: file was generated by a newer version of Illustrator. you want to import this file? data loss can occur

  What exactly does data loss?

  the pdf file contains no policy and is just an image

  The PDF file contains a file that is incorporated. Please look at this subject I / PDF file structure https://vimeo.com/117691712

  When you open this type of file in Illustrator, Illustrator tries to read the file incorporated, concludes that he cannot read and tells you that he cannot. Then he will try and open the PDF of the part instead. This will cause objects are not quite also be changed you might want as they are, which is actually "data loss".

• How do I cancel the mapping of a data store of esxi host without data loss

  Dear team,

  I want to cancel a data store that is mapped on two cluster mapping (cluster1 10 esxi host and cluster2 esxi 4 guests)

  
  

  
  

  Query1

  What step will be OK

  Disassemble = > detach = > start the activity of storage (storage poweroff) movement = > move the storage = > poweron = > join = > mounting

  or

  Disassemble = > detach = > team san will cancel the mapping = > start the activity of storage (storage poweroff) movement = > move the storage = > poweron = > san team will map the data store = > join = > mount

  Query2:

  Once I sail, I am able to see vpshere ha and dvs folder data, I just want to confirm if I want to take it apart and to separate the data store it will allow me to do it or it will throw an error, please confirm.

  Query3:

  If we remove and detach a data store, before that I have to cancel the registration of all the virtual machines?

  
  

  
  

  concerning

  Mr. Vmware

  Please find the right measures

  Query1

  
  

  before the take-off of export activity VM that are stored on the data store

  
  

  Home-online store of data and the data cluster store => select the data-VMs online store => add all columns => take export VM

  
  

  take the last export RVTool.

  
  

  
  stop all VMs-online you unsubscribe from all models and virtual computers-online RK on Cluster (change the setting-online data store-online here hearbeating we have to choose another data store and click OK)

  
  

  to confirm the new data store is visible as heartbeat data store select Cluster-online Sumamry-online state Custer-online Heartbeat Datastore)

  If we are able to see the new data store, then now remove old data from the heart rate data store store

  
  

  RK on Cluster (change the setting-online data store-online here hearbeating he have to uncheck the data store and click OK)
  

  
  

  disassemble => detach (you will need to perform this step on all esxi hosts)-online san team will be unmap-online beginning of movement storage (storage poweroff) => move the storage-online poweron-online san team will map the data-attach online store ((need to perform this step on all esxi hosts) => set up the data store)

  
  

  Register for all virtual machines

  
  

  PowerOn all VMs if get message (moved or copied) select moved.

  
  

  Query2:

  He doesn't throw any errors, will work flawless.

  
  

  Query3:

  Yes we must cancel the registration of all models and virtual computers before disassembling a data store.

  
  

  concerning

  Mr. VMware
  

  
  

  
  

• I HAV been trying to update my expiration date of credit card for 3 months.  When I go to lelien for "Update payment Details" and edit the expiration date and < click > save, I get an error saying my address in invalid.  I have several chat sessions

  Can someone please help...  Suggestions, how can I overcome this problem, in which case my Adobe Creative cloud subscription will expire today due to and credit card.

  I tried to update my expiration date of credit card for 3 months.  When I go to the "Update payment Details" link and change the expiry date then < click > save, I get an error saying my invalid address.  I had several chat sessions with support, called support and logged a ticket with support and every time they tell me to go to a particular link to update my contact information.  I do and I get the same error...   "My coordinates are not valid."  Now I'm in the position where my creative cloud membership will expire today everything simply because the Adobe address validation do not think that my address is valid.

  I got 'Cat' sessions with the support,

  I made a phone call to the support and

  I logged a ticket with support.  I'm really trying to pay my subscription.  Support ticket No. 0216009991

  Whenever I have contact the support they gave me a link to the site where I supposedly can I enter my credit card details.

  Whenever I went on the link provided, I'd get the same error.  "My coordinates are not valid."

  What I checked on my address.

  1. I look out the window and the view I get is the same as it was yesterday and the day, and in fact several years ago.

  2. I go out in the street, Yes, the street sign says the name of my street

  3. I go to my mailbox and it does not say the number of my mailing address

  4. yes I get the email to the address registered with Adobe

  5. yes I received the email from adobe delivered to the address

  6. I get the address of Google, yes I can find it on Google

  7. I converted to use the satellite view Google maps

  8. Yes, it's my house, with the 12 solar panels on the roof

  9. Yes, that's my black car in the driveway

  10. I check my reviews for my address Board rate, Yes, this is the address that I recorded with Adobe

  11. Yes, I had this same address registered at Adobe for the past 3 years.  So far I have not had a problem with my address

  12. I work with a software company that actually uses the address of Google, under license validation, built-in in their application.  I used this software to check to see if my address is recognized as valid.  You guessed it is recognized as valid.

  I did check my credit card

  12. Yes, I have, every time checked the status of my credit card with the Bank

  a. the card is valid

  b. the card's not over it's credit limit

  c. the card is not due

  d. the address registered to my credit card with the Bank is the same address that I recorded with Adobe

  Since the last link Adobe support gave me two weeks ago, to change my credit card details, I was able to key a new credit card in the fields (Yes it's good that I was forced to get a new credit card only for Adobe!   If I am that everything would be fine.

  But wait...   The details I provided this link have not been updated on the Adobe site.  (So I check the link... I was scammed to get my card number?)

  After investigation of the link, I'm fairly confident of the link provided is a true link to Adobe.  www.adobe.com/go/Secure

  Did anyone else had this type of problem when you try to update the expiration date of a credit card?

  The question is about to have an impact on my ability to process pictures for my photography business, it affects my ability to earn an income.

  So you could say I'm getting angry some of the stuffing!

  In summary...  I knew that my credit card had a new expiration date and I tried to update the expiration 3 months 3 months.

  Simply because the use of the validation of addresses, Adobe, has a few flaws, I was not able to update this information.  So Adobe today will stop my subscription.

  As I said in previous support tickets, chat sessions and telephone.  I'll be more disappointed if I am prevented from using software and Adobe cloud features.

  It is copied from an email I received during the night from Adobe...

  Continue to create with us

  Hi Thomas,

  Your Creative cloud membership will expire on August 23, 2015 (PT). We hope that you have been getting the best out of all that creative cloud has to offer. To extend your subscription, please update the billing for your account information, or add a prepaid card.

  Update your billing information (there is a link to where I can update the expiry date) pocztek sigh...   I still get the same error telling me that my address is not valid!

  Thank you for being a part of the creative cloud,

  The creative team Cloud

  Good creative team...  I REALLY WANT TO STAY IN THE TEAM, AS YOU CAN SEE FROM THE FOREGOING, THAT I REALLY TRIED TO SOLVE THIS PROBLEM SEVERAL TIMES OVER THE PAST 3 MONTHS.

  I tried to include as much information as possible in what I said earlier, I expressed in a way that will hopefully provide a little humor, but at the same time to portray the frustration I'm feeling right now.

  Honestly, I don't know what more I can do.  It seems that I have no other recourse start litigation for loss of income coming from Adobe address Validation errors.  There is a real chance that I will be litigated against because I won't be able to complete contracts.

  There must be a healthier solution of mind that court proceedings.

  Kind regards

  Thomas Croll

  (Tom)

  Tom, let me some time. I I will get these verified case and will contact you.